Alkali cation extraction by calix[4]crown-6 to room-temperature ionic liquids. The effect of solvent anion and humidity investigated by molecular dynamics simulations

We report a molecular dynamics study on the solvation of M+ (Na+ to Cs+) alkali cations and of their LM+ complexes with a calix[4]arene host (L = 1,3-dimethoxy-calix[4]arene-crown-6 in the 1,3-alternate conformation) in the [BMI][PF6] and [BMI][Tf2N] room-temperature ionic liquids "ILs" based on the BMI+ (1-butyl-3-methylimidazolium) cation. The comparison of the two liquids and the dry versus humid form of the former one (with a 1:1 ratio of H2O and BMI+PF6- species) reveals the importance of humidity: in [BMI][PF6]-dry as in the [BMI][Tf2N] liquid, the first solvation shell of the "naked" M+ ions is composed of solvent anions only (four PF6- anions, and from four to five Tf2N- anions, respectively, quasi-neutralized by a surrounding cage of BMI+ cations), while in the [BMI][PF6]-humid IL, it comprises from one to three solvent anions and about four H2O molecules. In the LM+ complexes, the cation is shielded from solvent, but still somewhat interacts with a solvent anion in the dry ILs and with water in the humid IL. We also report tests on M+ interactions with solvent anions PF6- and Tf2N- in the gas phase, showing that the AMBER results are in satisfactory agreement with QM results obtained at different levels of theory. The question of ion recognition by L is then examined by free energy perturbation studies in the three liquids, predicting a high Cs+/Na+ selectivity upon liquid extraction from an aqueous phase, in agreement with experimental results on a parent calixarene host. A similar Cs+/Na+ selectivity is predicted upon complexation in a homogeneous IL phase, mainly due to the desolvation energy of the free cations. Thus, despite their polar character, ionic liquids qualitatively behave as classical weakly polar organic liquids (e.g., choroform) as far as liquid-liquid extraction is concerned but more like polar liquids (water, alcohols) as far as complexation in a single phase is concerned.     

Porphyrin nanofiber patterning by air/water interfacial assembly: effect of molecular structure, surface pressure, and ionic liquid doped subphase

Porphyrin nanofiber patterning was generated by air/water interfacial assembly. The air/water interfacial aggregation behavior of two prophyrins, both of which contain two hydrophobic alkyl chains and two carboxylic acid substituent groups at different positions, was investigated using UV spectra, FT-IR spectra, and AFM measurements on the corresponding transferred films. The porphyrin nanofiber patterning can only be produced on ionic liquid (IL) doped water subphases by the assembly of the building blocks with two carboxylic acids located at the para-position (TPPA2b-A). The results suggest that the bulky cations of ionic liquids (ILs) can interact with the carboxylate of porphyrin electrostatically. The appropriate molecular geometries, ionic liquid (IL) doped water subphases, and relatively high surface pressures help the TPPA2b-A to form nanofiber patterns.     

Influence of different alkyl‐methylimidazolium tetrafluoroborate ionic liquids on the structure of pebax® films. Consequences on thermal,mechanical, and water sorption and diffusion properties

In this work, three ionic liquids (ILs) differing by the length of the alkyl chain linked to their cation were incorporated in a Pebax^® copolymer matrix through a solvent cast process for composition from 0 to 70 wt % IL. The copolymer/IL miscibility was investigated via IR Spectroscopy, Differential Scanning Calorimetry and Scanning Electron Microscopy. The three ILs dissolved in the copolymer soft phase for ILs content below 30 wt % whereas they formed segregated dispersed domains at higher loadings. The plasticizing effect of the ILs was examined through DSC and thermomechanical analyses. In the range of IL amount from 0 to 30 wt %, no significant differences were observed in the thermomechanical properties as a function of the IL structure. At higher IL content, the films based on 1‐ethyl‐methylimidazolium tetrafluoroborate sustained better properties. All films exhibited a good thermal stability up to 300 °C. The water sorption isotherms were modeled with GAB equation and both the kinetic and thermodynamic parameters of the sorption mechanism were investigated. A non‐monotonic evolution of the GAB parameters and diffusion coefficient as a function of the IL content was evidenced. Moreover, different behaviors were observed as a function of the IL nature and structuration within the copolymer matrix. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 811–824     

Temperature-responsive ionic liquid/water interfaces: relation between hydrophilicity of ions and dynamic phase change

Phase separation between ionic liquids (ILs) and molecular liquids is of interest physico-chemically, and also has industrial relevance. IL/water mixtures are of great interest in many fields. Unlike static phase separation between IL and water, dynamic shifts of IL/water mixtures between a homogeneous mixture and separate phases have a wide variety of applications. The miscibility of ILs with water generally increases upon heating, and a few ILs undergo a lower critical solution temperature (LCST)-type phase transition with water in which the separated biphases become miscible upon cooling. As the phase transition is controlled by changing the temperature by a few degrees, the LCST-type phase response of IL/water mixtures makes it possible to use ILs as solvents in various energy-saving processes. Since many hydrophilic ILs do not undergo phase separation with water, we aim to determine the necessary conditions under which hydrophobic ILs undergo the phase transition. Based on physico-chemical analysis of many hydrophobic ILs that undergo a phase separation after mixing with water, we find there is a particular range of "hydrophilicity" of these hydrophobic ILs within which the LCST-type phase transition is possible. Accordingly, a hydrophilicity index (HI) of ILs is proposed, in terms of the number of water molecules in the separated IL phase. The HI value proves to be a good indicator of the phase behaviour of IL/water mixtures, as well as their phase transition temperature. Potential application of the LCST-type phase change to the selective extraction of water-soluble proteins is also summarised.     

Headspace Single Drop Microextraction Using Micellar Ionic Liquid Extraction Solvents

A headspace single drop microextraction (SDME) method using extraction solvents comprised of micellar ionic liquids (ILs) was used to perform the extraction of 17 aromatic compounds from aqueous solution and coupled with liquid chromatography. The effects of various experimental parameters including type of micellar IL extraction solvent, stir rate, extraction time, volume of the microdroplet, and addition of organic solvent were investigated and optimized. Two different micellar solutions were formed by dissolving 1-decyl-3-methylimidazolium bromide ([DMIM][Br]) and sodium dodecyl sulfate (SDS) in 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]). It was observed that the enrichment factors of the 17 studied compounds were all enhanced with the micellar ionic liquid extraction solvent compared to the neat [BMIM][Cl] IL. The highest sensitivity was obtained with the [BMIM][Cl]–[DMIM][Br] micellar solution for polycyclic aromatic hydrocarbons (PAHs) with high molecular weight and fused rings while the [BMIM][Cl]–SDS micellar solution was proven to be more sensitive for smaller, more polar molecules. The detection limits were lower when utilizing the [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] extraction solvents compared to the neat [BMIM][Cl] extraction solvent. The reproducibility of the extraction method at 20 °C using extraction solvents composed of [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] ranged from 6.7 to 14.0 and 4.2 to 14.7%, respectively.     

Selective extraction of emerging contaminants from water samples by dispersive liquid-liquid microextraction using functionalized ionic liquids

Functionalized ionic liquids containing the tris(pentafluoroethyl)trifluorophosphate (FAP) anion were used as extraction solvents in dispersive liquid-liquid microextraction (DLLME) for the extraction of 14 emerging contaminants from water samples. The extraction efficiencies and selectivities were compared to those of an in situ IL DLLME method which uses an in situ metathesis reaction to exchange 1-butyl-3-methylimidazolium chloride (BMIM-Cl) to 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide (BMIM-NTf(2)). Compounds containing tertiary amine functionality were extracted with high selectivity and sensitivity by the 1-(6-amino-hexyl)-1-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate (HNH(2)MPL-FAP) IL compared to other FAP-based ILs and the BMIM-NTf(2) IL. On the other hand, polar or acidic compounds without amine groups exhibited higher enrichment factors using the BMIM-NTf(2) IL. The detection limits for the studied analytes varied from 0.1 to 55.1 μg/L using the traditional IL DLLME method with the HNH(2)MPL-FAP IL as extraction solvent, and from 0.1 to 55.8 μg/L using in situ IL DLLME method with BMIM-Cl+LiNTf(2) as extraction solvent. A 93-fold decrease in the detection limit of caffeine was observed when using the HNH(2)MPL-FAP IL compared to that obtained using in situ IL DLLME method. Real water samples including tap water and creek water were analyzed with both IL DLLME methods and yielded recoveries ranging from 91% to 110%.     

Ionic liquids as additives for separation of benzoic acid and chlorophenoxy acid herbicides by capillary electrophoresis

Ionic liquids (ILs) were tested as additives to phosphate-acetate buffer for the separation of chlorophenoxy and benzoic herbicide acids. The effects of buffer concentration, buffer pH, IL concentration, and concentration of organic solvent were investigated. It was found that in the presence of 40 mM phosphate-acetate containing 10% acetonitrile at pH 4.5, addition of 10 mM 1-butyl-3-methylimidazoium could reverse EOF. The shoulder-merged peaks of two herbicide acids, 2,4-dichlorobenzoic acid and 3,5-dichlorobenzoic acid, were successfully resolved by the addition of IL cation. Apart from these, results showed different IL cations had different influences on the migration behavior of some of the analytes, while IL anions did not lead to obvious difference on the separation.     

Ionic liquids: solvents and sorbents in sample preparation

The applications of ionic liquids (ILs) and IL‐derived sorbents are rapidly expanding. By careful selection of the cation and anion components, the physicochemical properties of ILs can be altered to meet the requirements of specific applications. Reports of IL solvents possessing high selectivity for specific analytes are numerous and continue to motivate the development of new IL‐based sample preparation methods that are faster, more selective, and environmentally benign compared to conventional organic solvents. The advantages of ILs have also been exploited in solid/polymer formats in which ordinarily nonspecific sorbents are functionalized with IL moieties in order to impart selectivity for an analyte or analyte class. Furthermore, new ILs that incorporate a paramagnetic component into the IL structure, known as magnetic ionic liquids (MILs), have emerged as useful solvents for bioanalytical applications. In this rapidly changing field, this Review focuses on the applications of ILs and IL‐based sorbents in sample preparation with a special emphasis on liquid phase extraction techniques using ILs and MILs, IL‐based solid‐phase extraction, ILs in mass spectrometry, and biological applications.     

Contact mechanics of nanometer-scale molecular contacts: correlation between adhesion, friction, and hydrogen bond thermodynamics

Using a scanning force microscope, adhesion forces have been measured between carboxylic acid terminated self-assembled monolayers in different nonpolar solvents or in two-component liquid mixtures consisting of a polar solvent (ethyl acetate or acetone) in heptane. The adhesion forces measured in pure acetone and ethyl acetate were small (0.24 nN) but increased logarithmically as the concentration of the polar solvent decreased to reach a maximum value (2.77 nN), equal to that measured in pure heptane, and for lower concentrations of polar solvent, the adhesion force remained constant. This behavior is identical to that observed for association constants measured for the formation of 1:1 H-bonded complexes between dilute solutes in solvent mixtures. The transition between the solvent-dependent and -independent regimes occurs at a polar solvent concentration corresponding to 1/K(S), where K(S) is the equilibrium constant for solvation of a carboxylic acid by the polar solvent in heptane. A simple model, in which the solvation of the carboxylic acid groups may be estimated by considering the concentration and polarity of functional groups in the liquid, accurately predicts values of K(S) that were found to correlate very well with the observed solvent-dependence of the adhesion force. Friction-load relationships were measured using friction-force microscopy. In pure acetone and ethyl acetate, a linear friction-load relationship was observed, in agreement with Amontons' law. However, as the concentration of polar solvent was reduced, a nonlinear relationship was observed and the friction-load relationship was found to fit the Derjaguin-Müller-Toporov (DMT) model for single asperity contacts. For pure heptane and a range of other nonpolar liquids with identical dielectric constants, the friction-load relationship was described by DMT mechanics. Exceptionally, for perfluorodecalin, Johnson-Kendall-Roberts mechanics was observed. These observations may be rationalized by treating the friction force as the sum of load-dependent and shear contributions. Under conditions of low adhesion, where the carboxylic acid surface is solvated by polar solvent molecules, the shear term is negligible and the sliding interaction is dominated by load-dependent friction. As the degree of solvation of the carboxylic acid groups decreases and the adhesion force increases, the shear friction contribution increases, dominating the interaction for media in which the adhesion force is greater than ca. 0.6 nN.     

Pyrylium sulfonate based ionic liquids

Pyrylium salts represent a new group of ionic liquids (ILs) containing a positive charge on the oxygen atom. The novel ILs were obtained starting with 4-pyrones from petroleum feedstock and renewable resources and sulfonic acids. The use of carboxylic acids instead of salts resulted in the formation of cocrystals. The synthesized pyrylium ionic liquids were stable in air and in contact with water and common organic solvents. The permanganate indices which are characteristic for prepared sulfonates were also investigated. The pyrylium ionic liquids were useful as immobilizers and dissolving agents in hydrosilylation reactions.     

CO2/离子液体体系热力学性质的分子动力学模拟

超临界CO2和离子液体(ILs)是两种绿色溶剂. 离子液体可以溶解超临界CO2, 而超临界CO2不能溶解离子液体. 由此设计构成的CO2/IL二元系统, 同时具备了超临界CO2和离子液体的许多优点: 既可以降低离子液体的粘度, 还便于相分离, 是新型的耦合绿色溶剂. 其物理化学性质对于设计反应、分离等过程非常重要. 因此, 本文以CO2/IL二元系统为研究对象, 通过选择合适的分子力场和系综, 运用分子动力学(MD)模拟方法研究了CO2/[bmim][PF6]、CO2/[bmim][NO3]等体系的热力学性质. 结果表明, CO2对ILs膨胀度的影响非常小, 当CO2摩尔分数为0.5时, ILs膨胀仅为15%. CO2/ILs的扩散系数远小于CO2膨胀甲醇、乙醇溶液的扩散系数. 随着CO2含量的增加, ILs的扩散系数提高, 粘度显著下降, 表明CO2能有效地改善ILs扩散性, 减小其粘度. 因此CO2可用以改善离子液体溶剂体系的传递特性, 增强反应分离过程在其中的进行.     

Analysis of aromatic acids by nonaqueous capillary electrophoresis with ionic‐liquid electrolytes

The separation of six kinds of aromatic acids by CZE with 1‐ethyl‐3‐methylimidazolium chloride (EMIMCl) and 1‐ethyl‐3‐methylimidazolium hydrogen sulfate (EMIMHSO₄)_, two kinds of ionic liquids (ILs) as background electrolytes, and acetonitrile as solvent were investigated. The six kinds of aromatic acids can be separated under positive voltage with low IL concentration with either of the two ILs and separation with EMIMHSO₄ is better in consideration of peak shapes and separation efficiency. But the migration order is different when the IL is different. Under negative voltage with high IL concentration, the six analytes can be separated with EMIMCl as background electrolytes and the migration order of the analytes is opposite to those with low concentration of EMIMCl as background electrolyte. The separations are based on the combination effects of heteroconjugation between the anions and cations in the ILs and the analytes, of which the heteroconjugation between the anions in the ILs and the analytes plays a dominant role. The heteroconjugation between the anions of the ILs and analytes is proton sensitive and only a very small amount of proticsolvents added into the electrolyte solution can harm the separation. When EMIMCl concentration is high, the heteroconjugation between the IL anions and the proton in the analytes make the effective mobility of the analytes much higher than the EOF and their migration direction reversed. Finally, the six aromatic acids in water samples were analyzed by nonaqueous CE with low concentration of EMIMHSO₄ as background electrolytes with satisfactory results.     

NMR Investigation of Imidazolium‐Based Ionic Liquids and Their Aqueous Mixtures

¹H and ¹³C NMR spectroscopy is employed to investigate the interaction of water with two imidazolium‐based ionic liquids (ILs), 1‐hexyl‐3‐methylimidazolium bromide ([C₆mim]Br) and 1‐octyl‐3‐methylimidazolium bromide ([C₈mim]Br), at IL concentrations well above the critical aggregation concentration (CAC). The results are compared with those of the neat samples. To this aim, a detailed analysis of the changes in the ¹H chemical shifts, ¹³C relaxation parameters, and 2D ROESY data due to the presence of water is performed. The results for both neat ILs are consistent with a packed structure where head‐to‐head, head‐to‐tail, and tail‐to‐tail contacts occur and where the site of maximal mobility restriction is at the polar head. At the lowest investigated water content, the presence of water influences mainly the environment around the IL polar head, slowing down the motional dynamics of the aromatic ring with respect to the alkyl chain. At higher water contents this difference diminishes, the motional freedom of the whole molecule increasing. The presence of ROESY cross‐peaks between protons in the polar and apolar IL regions, as well as between protons in non‐neighboring alkyl groups, at all investigated water contents suggests that the alkyl tails are not fully segregated in hydrophobic domains, as expected for micelle‐like structures.     

Effect of Protic Ionic Liquid and Surfactant Structure on Partitioning of Polyoxyethylene Non‐ionic Surfactants

The partitioning constants and Gibbs free energies of transfer of poly(oxyethylene) n‐alkyl ethers between dodecane and the protic ionic liquids (ILs) ethylammonium nitrate (EAN) and propylammonium nitrate (PAN) are determined. EAN and PAN have a sponge‐like nanostructure that consists of interpenetrating charged and apolar domains. This study reveals that the ILs solvate the hydrophobic and hydrophilic parts of the amphiphiles differently. The ethoxy groups are dissolved in the polar region of both ILs by means of hydrogen bonds. The environment is remarkably water‐like and, as in water, the solubility of the ethoxy groups in EAN decreases on warming, which underscores the critical role of the IL hydrogen‐bond network for solubility. In contrast, amphiphile alkyl chains are not preferentially solvated by the charged or uncharged regions of the ILs. Rather, they experience an average IL composition and, as a result, partitioning from dodecane into the IL increases as the cation alkyl chain is lengthened from ethyl to propyl, because the IL apolar volume fraction increases. Together, these results show that surfactant dissolution in ILs is related to structural compatibility between the head or tail group and the IL nanostructure. Thus, these partitioning studies reveal parameters for the effective molecular design of surfactants in ILs.     

Evaluating the complexation behavior and regeneration of boron selective glucaminium-based ionic liquids when used as extraction solvents

Glucaminium-based ionic liquids are a new class of solvents capable of extracting boron-species from water with high efficiency. The complexation behavior of these ILs with borate was thoroughly studied using ¹¹B NMR. Two different complexes, namely, monochelate complex and bischelate complex, were observed. ¹¹B NMR was used extensively to determine the formation constants for monochelate and bischelate complexes. The IL concentration was observed to have a significant effect on the IL–borate complexes. Using an in situ dispersive liquid–liquid microextraction (in situ DLLME) method, the extraction efficiency for boron species was increased dramatically when lithium bis[(trifluoromethyl)sulfonyl]imide (LiNTf₂) was used as the metathesis salt in an aqueous solution containing 0.1 M sodium chloride. IL regeneration after extraction was achieved using 0.1 M hydrochloric acid. The extraction efficiency of boron species was consistent when the IL was employed after three regeneration cycles. The selectivity of the IL for boron species in synthetic seawater samples was similar to performing the same extraction from Milli-Q water samples.     

Protein structure and dynamics in ionic liquids. Insights from molecular dynamics simulation studies

We present in this work the first molecular simulation study of an enzyme, the serine protease cutinase from Fusarium solani pisi, in two ionic liquids (ILs): 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) and 1-butyl-3-methylimidazolium nitrate ([BMIM][NO(3)]). We tested different water contents in these ILs at room temperature (298 K) and high temperature (343 K), and we observe that the enzyme structure is highly dependent on the amount of water present in the IL media. We show that the enzyme is preferentially stabilized in [BMIM][PF6] at 5-10% (w/w) (weight of water over protein) water content at room temperature. [BMIM][PF6] renders a more nativelike enzyme structure at the same water content of 5-10% (w/w) as previously found for hexane, and the system displays a similar bell-shape-like dependence with the water content in the IL media. [BMIM][PF6] is shown to increase significantly the protein thermostability at high temperatures, especially at low hydration. Our analysis indicates that the enzyme is less stabilized in [BMIM][NO(3)] relative to [BMIM][PF6] at both temperatures, most likely due to the strong affinity of the [NO(3)]- anion toward the protein main chain. These findings are in accordance with the experimental knowledge for these two ionic liquids. We also show that these ILs "strip off" most of the water from the enzyme surface in a degree similar to that found for polar organic solvents such as acetonitrile, and that the remaining waters at the enzyme surface are organized in many small clusters.     

Interactions of 1-butyl-3-methylimidazolium carboxylate ionic liquids with glucose in water: a study of volumetric properties, viscosity, conductivity and NMR

Extensive applications of ionic liquids (ILs) may result in their accumulation in the ecological environment and organisms. Although ILs are popularly called "green solvents", their toxicity, in fact, has been exhibited. Therefore the interaction of ILs with biomolecules is a cutting-edge research subject. Herein, the interactions of 1-butyl-3-methylimidazolium carboxylate ionic liquids ([C(4)mim][HCOO], [C(4)mim][CH(3)COO] and [C(4)mim][CH(3)CH(2)COO]) with glucose in water were studied for their volumetric properties, viscosity, conductivity and NMR spectra. Limiting apparent molar volumes (V(Φ, IL)(0)), viscosity B-coefficients, limiting molar conductivities (Λ(0)) and Walden products (Λ(0)η(0)) were evaluated for the ILs in glucose + water solutions. Volumetric interaction parameters were also obtained from the transfer volumes of the ionic liquids. The contributions of the solvent properties (B(1)) and the ionic liquid-solvent interactions (B(2)) to the B-coefficient were extracted, together with molar activation energies (Δμ(IL)(0≠)) of the ionic liquids for viscous flow of the aqueous glucose + IL solution. In addition, the (13)C and (1)H NMR spectra of methyl β-D-glucopyranoside and ILs in β-D-glucopyranoside + IL + D(2)O were studied. The NMR results show that no special and strong interactions were observed between glucopyranoside and the ILs. However, it was confirmed that the H2 on the imidazolium ring has more activity (acidity) than atoms H4 and H5. The macro-properties and their changes were also discussed in terms of the size, structure and solvation of the ILs and glucose.     

Nanostructure self-organization of ionic liquids

The theory of integral equations was applied to investigate the formation of structures in ionic liquids (ILs). The effect of temperature and the length of the cation tails on the structural properties of a system was studied. An intermediate type of ordering in ILs as compared with common liquids was observed. The formation of polar and nonpolar domains was revealed, with the distribution of the polar domains having the shape of a three-dimensional net coexisting with nonpolar domains. The characteristic scale of intermediate ordering was shown to increase as a power function without disturbing the shape of the distribution of polar domains as the length of the cation tails grew.     

Effects of water content on the dissolution behavior of wool keratin using 1-ethyl-3-methylimidazolium dimethylphosphate

Ionic liquids(ILs) are eco-friend and recyclable solvents for dissolution of wool keratin, and water is often used as antisolvent to regenerate keratin from IL solution. To recycle the ILs, removing water is the necessary step. However, complete removal of the water is energy-intensive and costly. The water in ionic liquids would change the physicochemical properties and cluster structures of the IL and further affect its dissolution behavior on keratin. Here, 1-ethyl-3-methylimidazolium dimethylphosphate([Emim]DMP) was used for experiments due to its good performance on dissolving keratin. The experimental and simulation results showed that the dissolving capability of [Emim]DMP was decreased and the interactions between cation and anion became weaker with water concentration increasing. Furthermore, the dissolution time of wool keratin in [Emim]DMP increased with water content rising. At the same time, the effect of water in ILs on the secondary structure distribution and thermal stability of regenerated keratin was not obvious. In this work, by taking the structures of [Emim]DMP, keratin dissolution time and properties of the regenerated keratin into consideration, a balanced range of water content in [Emim]DMP was determined, which could not only reduce recycling cost but also not affect the dissolution behavior of the IL.