Power consumption for an agitated vessel equipped with pitched blade turbine and short baffles

Power characteristics for an agitated vessel equipped with planar short baffles of length L and pitched blade turbine of pitch β are presented in the paper. The studies were carried out in the vessel of inner diameter D = 0.6 m, where the baffles were located in the distance p from the vessel bottom (p + L = H). Torque was measured using strain gauge method within the turbulent regime of the flow of Newtonian liquid in the agitated vessel. The effects of the pitch β and geometrical parameter p/H on the power number Ne were determined mathematically. The results showed that, for the assumed value of the angle β, the function Ne = f (L/H) decreases with the decrease in the baffle length L (i.e. with the increase in the parameter p). Moreover, for the assumed value of the baffle length L, the function Ne = f (β) increases with the increase in the angle β of the inclination of the impeller blade.     

Use of the ionic liquid trioctylmethyl ammonium dodecanedioate as a corrosion inhibitor of steel in production water

The properties of trioctylmethyl ammonium dodecanedioate (TAD) as a corrosion inhibitor (CI) of API 5L X52 steel in production water (PW) were evaluated in steady state using weight loss and polarization techniques within a Reynolds number (N _Re ) interval ranging from 500 to 40,000. The highest obtained IE was 87 % at 100 ppm with N _Re  = 2500, whereas the lowest IE was 15 % at 10 ppm with N _Re  = 4000. TAD was classified as a mixed-type CI of API 5L X52 steel in PW. The \(\Delta G_{\text{ads}}^{^\circ }\) data established a relationship between the N _Re and the adsorption process, confirming the occurrence of physical adsorption phenomena.     

Magnetic field effects on natural convection flow of a non-Newtonian fluid in an L-shaped enclosure

The effect of magnetic field on natural convection heat transfer in an L-shaped enclosure filled with a non-Newtonian fluid is investigated numerically. The governing equations are solved by finite-volume method using the SIMPLE algorithm. The power-law rheological model is used to characterize the non-Newtonian fluid behavior. It is revealed that heat transfer rate decreases for shear-thinning fluids (of power-law index, n?<?1) and increases for shear-thickening fluids (n?>?1) in comparison with the Newtonian ones. Thermal behavior of shear-thinning and shear-thickening fluids is similar to that of Newtonian fluids for the angle of enclosure α?<?60° and α?>?60°, respectively.     

New hybrids of clozapine and haloperidol and their isosteric analogues: synthesis,X-ray crystallography,conformational analysis and preliminary pharmacological evaluation

Schizophrenia is a debilitating mental disorder which affects approximately 1% of the world’s population. Clozapine is an atypical antipsychotic showing unmatched effectiveness in the control of treatment-resistant schizophrenia. Unlike typical antipsychotics, clozapine does not induce extrapyramidal side effects (EPS), tardive dyskinesia or elevate prolactin levels. However, clozapine can induce a potentially fatal blood disorder, agranulocytosis, in 1–2% of patients, severely limiting its clinical use. The model for antipsychotic activity under investigation is based on obtaining a clozapine-like profile with preferential dopamine D₄ and serotonin 5-HT_2A receptor affinity. Profiled herein are three unique members of a series of prospective antipsychotic agents. Compound (I) originated from the structural hybridization of the commercial therapeutics, clozapine and haloperidol, whilst compounds (II) and (III) possess an alternative tricyclic nucleus derived from JL13; a clozapine-like atypical antipsychotic developed by Liégeois et al. These compounds have been synthesized and characterized by means of elemental analysis, IR, ¹H and ¹³C-NMR spectroscopy, MS and X-ray diffraction. Compound (I) crystallizes in space group P(?1) with a = 10.5032(1), b = 10.6261(2), c = 12.6214(3) Å, α = 81.432(1)°, β = 83.292(1)°, γ = 61.604(1)°, Z = 2, V = 1223.62(4) Å³, C₂₈H₂₉ClN₄O, M _r = 473.00, D _c = 1.284 Mg/m³, μ = 0.185 mm^?1, F(000) = 500, R = 0.0506 and wR = 0.1304. Compound (II) crystallizes in the monoclinic space group P2₁/c with a = 10.8212(2), b = 9.3592(2), c = 22.9494(5) Å, β = 106.471(1)°, Z = 4, V = 2228.88(8) Å³, C₂₅H₂₅ClN₄O₂, M _r = 448.94, D _c = 1.338 Mg/m³, μ = 0.202 mm^?1, F(000) = 944, R = 0.0529 and wR = 0.1129. Compound (III) crystallizes in the monoclinic space group P2₁/c with a = 10.5174(2), b = 9.3112(2), c = 24.2949(5) Å, β = 98.666(1)°, Z = 4, V = 2352.03(8) Å³, C₂₅H₂₄Cl₂N₄O₂, M _r = 483.38, D _c = 1.365 Mg/m³, μ = 0.306 mm^?1, F(000) = 1008, R = 0.0478 and wR = 0.1067. The solid state conformations of (I), (II) and (III) exhibit the characteristic V-shaped buckled nature of the respective dibenzodiazepine and pyridobenzoxazepine nuclei with the central seven-membered heterocycle in a boat conformation. The molecules of (I) form a head-to-tail dimeric motif stabilized by hydrogen bonding. The results of a conformational analysis of compounds (I)–(III) investigating the effect of environment (in vacuo and aqueous solution) are presented. These analogues were tested for in vitro affinity for the dopamine D₄ and serotonin 5-HT_2A receptors and their comparative receptor binding profiles to clozapine and JL13 are reported.     

Structure,bioactivity and theoretical study of 1-cyano-<Emphasis Type="Italic">N</Emphasis>-p-tolylcyclo-propanecarboxamide

A novel cyclopropane derivative, 1-cyano-N-p-tolylcyclopropanecarboxamide (C₁₂H₁₂N₂O, Mr = 200.24) was synthesized and its structure was studied by X-ray diffraction, FTIR, ¹H and ¹³C NMR spectrum and MS. The crystals are monoclinic, space group P2_1/c with a = 7.109 (4), b = 13.758 (7), c = 11.505 (6) Å, α = 90.00, β = 102.731 (8), γ = 90.00 °, V = 1097.6 (9) ų, Z = 4, F(000) = 312, D _c  = 1.212 g/cm³, μ = 0.0800 mm^?1, the final R = 0.0490 and wR = 0.1480 for 1,375 observed reflections with I > 2σ(I). A total of 6,109 reflections were collected, of which 2,290 were independent (R _int = 0.0290). Theoretical calculation of the title compound was carried out with HF/6-31G (d,p), B3LYP/6-31G (d,p), MP2/6-31G (d,p). The full geometry optimization was carried out using 6-31G(d,p) basis set, and the frontier orbital energy. Atomic net charges were discussed, and the structure-activity relationship was also studied. The preliminary biological test showed that the synthesized compound is bioactive against the KARI of Escherichia coli.     

Synthesis,crystal structure,and hydrogen-bonded displacive-type structural phase transition of guanidine dichloroacetate

Guanidine dichloroacetate was synthesized and separated as crystals. Differential scanning calorimetry (DSC) measurement shows that this compound undergoes a reversible phase transition at about 275 K with a heat hysteresis of 28 K. Step-like dielectric anomaly observed at 274 K further confirms the phase transition. The single-crystal X-ray diffraction data suggested that these was a transition from a room-temperature phase with the space group of P2₁/n (a = 8.030(5), b = 12.014(9), c = 8.124(6) Å, β = 96.089(1)°, V = 779.3(1) Å³, and Z = 4) to a low-temperature one with the space group of P2₁/c (a = 7.941(2), b = 11.828(3), c = 10.614(2) Å, β = 130.985(1)°, V = 752.6(3) Å³, and Z = 4). The displacements of hydrogen bonds induce the structure phase transition.     

Synthesis,crystal structure and fungicidal activity of 1-(4-chlorophenyl)-2-(5-((3,5-dimethyl-1H-pyrazol-1-yl)methyl)-4-phenyl-4H-1,2,4-triazol-3-ylthio)ethanone

A novel bis-heterocyclic compound was synthesized and characterized. The crystal structure of the title compound (C₂₂H₂₀ClN₅OS, Mr = 437.94) has been determined by single-crystal X-ray diffraction. The crystal is of triclinic, space group P-1 with a = 8.646 (2), b = 9.148 (3), c = 14.540 (4) Å, α = 94.422 (4), β = 98.500 (4), γ = 102.823 (4)°, V = 1101.8 (5) Å³, Z = 2, F(000) = 312, Dc = 1.320 g/cm³, μ = 0.2900 mm^?1, the final R ₁ = 0.041000 and wR ₂ = 0.1160 for 2675 observed reflections with I > 2σ(I). A total of 5623 reflections were collected, of which 3866 were independent (R _int = 0.019000). The fungicidal activity of title compound was determined, the results showed the title compound displayed moderate fungicidal activity against G. zeae Petch, Phytophthora infestans (Mont.) de Bary, Botryosphaeria berengeriana f. sp. piricola (Nose) koganezawa et Sakuma, Fusarium oxysporum f.sp. cucumerinum, and Cercospora arachidicola.     

Synthesis,spectroscopic characterization,crystal structures,and theoretical studies of (<Emphasis Type="Italic">E</Emphasis>)-2-(2,4-dimethoxybenzylidene)thiosemicarbazone and (<Emphasis Type="Italic">E</Emphasis>)-2-(2,5-dimethoxybenzylidene)thiosemicarbazone

Two thiosemicarbazones, (E)-2-(2,4-dimethoxybenzylidene)thiosemicarbazone (24-MBTSC (1)) and (E)-2-(2,5-dimethoxybenzylidene)thiosemicarbazone (25-MBTSC (2)), derived from 2,4-dimethoxybenzaldehyde and 2,5-dimethoxybenzaldehyde, respectively, with thiosemicarbazide have been synthesized and their structures were characterized by elemental analyses, FT-IR, ¹H NMR spectroscopy, and X-ray single-crystal diffraction analysis. Molecular orbital calculations have been carried out for 1 and 2 by using an ab initio method (HF) and also density functional method (B3LYP) at 6-31G basis set. Compound 1 crystallizes in the monoclinic system, space group P2₁/c, with a = 8.1342(5) Å, b = 18.1406(10) Å, c = 8.2847(6) Å, β = 109.7258(17)°, V = 1150.75(12) Å³, and Z = 4, whereas compound 2 crystallizes in the orthorhombic system, space group Pbca, with a = 11.0868(6) Å, b = 13.1332(6) Å, c = 15.9006(8) Å, V = 2315.2(2) Å³, and Z = 8. The compounds 1 and 2 displays a trans-configuration about the C=N double bond.     

A Novel 3D Platinum–Thallium Coordination Polymer having Strong Metal–Metal Interactions

A new three-dimensional platinum(II)–thallium(I) coordination polymer [{Pt(pda)(NHCOtBu)₂}₄Tl₄][Pt(CN)₄]₂·2H ₂ O (pda = 1,2-propyldiamine) has been prepared from the direct reaction of [Tl₂Pt(CN)₄] and [Pt(pda)(NHCOtBu)₂] in water, and its structure was characterized by X-ray diffraction analysis. The compound crystallizes in monoclinic, space group Pn, a = 11.567(2) Å, b = 11.570(2) Å, c = 37.677(8)Å, β = 94.64(3)°, V = 5025.8(17) Å³, Z = 2, R1 = 0.0679 and wR2 = 0.1574 [I >  2σ (I)], Goodness-of-fit on F ² = 1.055. The compound exhibits a novel 3D network structure consisting of [Pt(CN)₄]^2? connected 1D infinite Pt–Tl–Pt–Tl chains via strong Pt–Tl bonds.     

Determination of Hg isotopic compositions in certified reference material NIES No. 13 Human Hair by cold vapor generation multi-collector inductively coupled plasma mass spectrometry

Hg isotopic ratios of NIES CRM No. 13 Human Hair were analyzed using cold vapor generation coupled to multi-collector inductively coupled plasma mass spectrometer to meet the growing demand for better understanding of Hg exposure routes by using Hg isotopic compositions in human hair samples. To validate and assure the accuracy of our analytical method, (1) the reproducibility of the Hg isotopic measurement was monitored and (2) the Hg isotopic compositions of four secondary reference materials—IAEA-085, IAEA-086, and CRPG-RL24H—were measured. Our results for NIES CRM No. 13 show the mass-dependent fractionation values of δ ¹⁹⁹Hg = (2.13 ± 0.07) ‰, δ ²⁰⁰Hg = (0.98 ± 0.08) ‰, δ ²⁰¹Hg = (2.77 ± 0.10) ‰, δ ²⁰²Hg = (1.89 ± 0.10) ‰, and δ ²⁰⁴Hg = (2.76 ± 0.16) ‰ (2SD, n = 11) and the mass-independent fractionation values of Δ ¹⁹⁹Hg = (1.65 ± 0.06) ‰, Δ ²⁰⁰Hg = (0.04 ± 0.04) ‰, Δ ²⁰¹Hg = (1.36 ± 0.07) ‰, and Δ ²⁰⁴Hg = (?0.04 ± 0.11) ‰ (2SD, n = 11). Interlaboratory comparison of the CRM performed at the University of Pau showed good agreement with the values obtained at NIES.     

Synthesis and characterization of a new monophosphate (C<Subscript>6</Subscript>H<Subscript>16</Subscript>N<Subscript>2</Subscript>)(H<Subscript>2</Subscript>PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Chemical preparation, crystal structure, and NMR spectroscopy of a new trans-2,5-dimethylpiperazinium monophosphate are given. This new compound crystallizes in the triclinic system, with the space group P-1 and the following parameters: a = 6.5033(3), b = 7.6942(4), c = 8.1473(5) Å, α = 114.997(3), β = 92.341(3), γ = 113.136(3), V = 329.14(3) ų, Z = 1, and D_x = 1.565 g cm^?3. The crystal structure has been determined and refined to R = 0.030 and R _w(F ²) = 0.032 using 1558 independent reflections. The structure can be described as infinite [H₂PO₄] _n ^n? chains with (C₆H₁₆N₂)²⁺ organic cations anchored between adjacent polyanions to form columns of anions and cations running along the b axis. This compound has also been investigated by IR, thermal, and solid-state, ¹³C and ³¹P MAS NMR spectroscopies and Ab initio calculations.     

X-ray and computational structural study of neutral <Emphasis Type="Italic">bis</Emphasis>(<Emphasis Type="Italic">N,N,N</Emphasis>′,<Emphasis Type="Italic">N</Emphasis>′-tetramethylthiophosphoramidoyl)-methylamine

The structure of bis(N,N,N′,N′-tetramethylthiophosphoramidoyl)-methylamine 1 has been determined by single-crystal X-ray diffraction. The compound 1 crystallizes in the monoclinic system, with a space group P2₁/c, a = 11.836(2) Å, b = 11.659(2) Å, c = 12.796(5) Å and β = 95.28(3)°, V = 1758.3(5) Å³ and Z = 4. The X-ray crystallographic data have been assessed by semi-empirical and ab-initio density functional theory and by Hartree–Fock molecular orbital methods. A comparative study of the results of the different methods is given.     

Synthesis,crystal structure,and thermodynamics of a high-nitrogen copper complex with <Emphasis Type="Italic">N</Emphasis>, <Emphasis Type="Italic">N</Emphasis>-bis-(1(2)H-tetrazol-5-yl) amine

A new high-nitrogen complex [Cu(Hbta)₂]·4H₂O (H₂bta = N,N-bis-(1(2)H-tetrazol-5-yl) amine) was synthesized and characterized by elemental analysis, single crystal X-ray diffraction and thermogravimetric analyses. X-ray structural analyses revealed that the crystal was monoclinic, space group P2(1)/c with lattice parameters a = 14.695(3) Å, b = 6.975(2) Å, c = 18.807(3) Å, β = 126.603(1)°, Z = 4, D _c = 1.888 g cm^?3, and F(000) = 892. The complex exhibits a 3D supermolecular structure which is built up from 1D zigzag chains. The enthalpy change of the reaction of formation for the complex was determined by an RD496–III microcalorimeter at 25 °C with the value of ?47.905 ± 0.021 kJ mol^?1. In addition, the thermodynamics of the reaction of formation of the complex was investigated and the fundamental parameters k, E, n, \( \Updelta S_{ \ne }^{{{\uptheta}}} \), \( \Updelta H_{ \ne }^{{{\uptheta}}} \), and \( \Updelta G_{ \ne }^{{{\uptheta}}} \) were obtained. The effects of the complex on the thermal decomposition behaviors of the main component of solid propellant (HMX and RDX) indicated that the complex possessed good performance for HMX and RDX.     

Dissolved air flotation for treating wastewater of the nuclear industry: preliminary results

Preliminary testing of dissolved air flotation (DAF) for wastewater treatment is presented. A combined coagulation-flocculation/DAF column system is used to remove oil and ⁶⁰Co from nuclear industry wastewater. In this work, operational conditions and coagulant/flocculant concentrations are optimized by varying pH. Determinations of air-solids ratio (G/S), retention time (θ), pressure (P), volume of depressurized air–water mixture (V), turbidity and ⁶⁰Co concentrations are reported. The effect of the treatment on the efficiency of separation of oily residues is also discussed. The results establish that the coagulant/flocculant system, formed by a modified polyamine (25 mgL^?1) and a slightly cationic polyacrylamide (1.5 mgL^?1), under specific operational conditions (pH = 7, mixing intensity Im₁ = 300 s^?1 and Im₂ = 30 s^?1), allowed the destabilization of colloidal matter, resulting in resistant flocs. It was concluded that by using G/S = 0.3, θ = 15 min, P = 620 kPa and V = 0.0012 m³, the greatest percentage removals of oil, turbidity, total cobalt and ⁶⁰Co were obtained. These preliminary results then show that dissolved air flotation represents a good alternative for treatment of nuclear industry wastewater contaminated with radionuclides.     

Synthesis,crystal, and molecular structure of coordination polymers constructed by self-assembly of NiN<Subscript>4</Subscript> cores with 2,2′-iminodibenzoate and nitroprusside ions

Two coordination compounds of compositions [Ni(L¹)(idba)(H₂O)]·1.5 H₂O (1) and [Ni(L²)Fe(CN)₅NO]·C₂H₅OH (2) where L¹ is N, N′-bis(3-aminopropyl)ethylenediamine, L² is 2,12-dimethyl-3,7,11,17-tetraazabicyclo[11.3.1]heptadeca-1(17),2,11,13,15-pentaene, and idba^2? is 2,2′-iminodibenzoate have been synthesized and characterized by elemental analysis, IR spectroscopy, thermal analysis, and single-crystal X-ray diffraction. Complex 1 crystallizes in the monoclinic space group P2₁/n (No. 14) with a=9.810(2) Å, b=10.230(2) Å, c=25.350(5) Å, V=2543.6(9) Å³, Z=4, and R=0.0727. The nickel atom is six-coordinated by four N atoms of amine and two O atoms of water and idba^2?. The molecular packing of the complex comprises of an infinite one-dimensional layered network in which the molecules in the crystal are held together by a system of hydrogen bonding. Complex 2, however, crystallizes in the space group C2/c (No. 15) of the monoclinic system with a=19.7990(4) Å, b=14.9440(3) Å, c=19.8800(3) Å, V=5115.90(17) Å³, Z=4, and R=0.0540. The Ni ion in compound 2 has a slightly distorted octahedral arrangement of the N₄ donor atoms of primary ligand L² and two N-donor atoms of the secondary nitroprusside ligand. The structure of 2 displays an extended one-dimensional network formed by linear [—Ni—NC—Fe—CN—] units. A cyclic voltammetric study shows that compound 1 undergoes a quasireversible oxidation attributable to Ni²⁺ → Ni³⁺ in the range 300–420 mV vs SCE.     

Synthesis,characterization, and crystal structure of modified benzophenone UV-absorber containing reactive group

A modified benzophenone UV-absorber containing reactive group (4-(4,6-dichloro-1,3,5-triazin-2-yloxy)-2-hydroxyphenyl)phenyl)methanone (UV-DTHM) has been prepared in good yield from the nucleophilic substitution reaction of 2,4-dihydroxy benzophenone with 2,4,6-trichlorotriazine, catalyzed by 1.3 equiv. NaOH. The most favorable reaction conditions (the catalyst dosage, the mole ratio of the reactants, and reactive time) were selected. The compound was characterized by IR spectroscopy, ¹H NMR, ¹³C NMR, mass spectrometry, elemental analysis, and single crystal X-ray diffraction. The crystal monoclinic, space group C c with the unit cell parameters a = 3.987(2), b = 30.688(16), c = 12.423(6) Å and α = 90.00, β = 92.117(15), γ = 90.00º, Z = 4, R = 0.0620. wR(F ²) = 0.1589. The crystal structure reveals that 2,4,6-trichlorotriazine is boned to 4-seat hydroxyl of 2,4-dihydroxy benzophenone and a intramolecular hydrogen bond is formed with hydrogen of 2-hydroxyl and oxygen of carbonyl group. Moreover, thermogravimetric analysis (TGA) of UV-DTHM was studied, showing two distinct endothermic peaks at temperatures of 281.5 and 358.5 °C. The molar absorption coefficient of UV-DTHM is 1.6 × 10⁴ and 6.3 × 10³ at 268 and 330 nm, respectively, and shows excellent ultraviolet absorption property.     

A novel synthesis of 2,5-diphenylpyrazine

The compound C₁₆H₁₂N₂ (2,5-diphenylpyrazine) was obtained as the by-product of synthesizing 5H-Imidazol[2,3-b]isoquinoline-1-ethanol-5-one,1,2,3,10b-tetrahydro-, β(S)-phenyl-3(S)-phenyl-(compound 2), and its structure was determined by X-ray diffraction. The crystal is monoclinic, P2(1)/c, a = 13.466(5) Å, α = 90.00º, b = 5.758(2) Å, β = 93.049(9)º, c = 7.713(3) Å, γ = 90.00º, V = 597.2(4) Å³, Z = 2, Dcalc. = 1.292 mg/m³; the final R factor is R₁ = 0.0592, 771 for reflections with I ₀ > 2σ(I ₀).     

Saw-sedge <Emphasis Type="Italic">Cladium mariscus</Emphasis> as a functional low-cost adsorbent for effective removal of 2,4-dichlorophenoxyacetic acid from aqueous systems

For the first time in the published literature, a study is described concerning the use of the saw-sedge Cladium mariscus (C. mariscus) for adsorption of 2,4-dichlorophenoxyacetic acid (2,4-D) from aqueous systems. Among the experiments carried out, the elemental composition of C. mariscus was determined (C = 48.0 %, H = 7.1 %, N = 0.95 %, S = 0.4 %), FTIR spectroscopic analysis was performed to confirm the chemical structure of the adsorbent, and porous structure parameters were measured: BET surface area (A _BET  = 0.6 m²/g), total pore volume (V _p  = 0.001 cm³/g) and average pore size (S _p  = 6.6 nm). It was shown that the effectiveness of removal of 2,4-D from aqueous systems using C. mariscus depends on parameters of the process: contact time, system pH, mass of sorbent, and temperature. Maximum adsorption was attained for a solution at pH = 3. Further increase in the alkalinity of the tested systems led to a reduction in the effectiveness of the process. The kinetic of adsorption of 2,4-D by C. mariscus was also determined, and thermodynamic aspects were investigated. The experimental data obtained correspond to a pseudo-second-order kinetic model of type 1. Additionally the negative values obtained for ΔHº indicate that the process is exothermic, and the negative values of ΔGº show it to be spontaneous. As the temperature of the system increases the spontaneity of adsorption is reduced, in accordance with the exothermic nature of the process.