Flow-injection determination of paraoxon by inhibition of immobilized acetylcholinesterase

Two flow-injection methods (continuous-flow and stopped-flow) are proposed for the determination of paraoxon, applying the dual-injection technique and spectrophotometric detection. They are based on the inhibition of the acetylcholinesterase-catalysed hydrolysis of α-naphthyl acetate and subsequent reaction of the α-naphthol produced with p-nitrobenzenediazonium fluoroborate. For the continuous-flow system the calibration graph was linear from 5 × 10^?7 to 1.5 × 10^?5 M, the relative standard deviation (r.s.d.) (n=6) for an 8 × 10^?6 M standard was 1.4%, the limit of detection (3σ) was 4 × 10^?7 M and the sample throughput was ca. 60 h^?1. For the stopped-flow system the linear range was from 1 × 10^?8 to 4 × 10^?7 M, the r.s.d. for a 2.5 × 10^?7 M standard was 0.9%, the limit of detection was 8 × 10^?9 M and the sample throughput was 30 h^?1.     

Determination of chlorite at very low levels by using differential pulse polarography

A method is reported for the determination of μgl^?1 levels of chlorite by using differential pulse polarography. The electrochemical reduction of chlorite was studied between pH 3.7 and 14 and in an ionic strength range of 0.05–3.0 M. The optimum conditions are pH 4.1–4.4 and an ionic strength of 0.45 M. The current under these conditions is diffusion-controlled and is a linear function of chlorite concentration ranging from 2.77×10^?7 to 2.80×10^?4 M (19 μgl^?1 to 19 mg l^?1). The imprecision is better than ±1.0% and ±3.4% at concentrations of 2.87×10^?5 M and 1.74×10^?6M, respectively, with a detection limit of 1×10^?7 M (7μgl^?1). An interference study and the application of this method for determining chlorite in drinking water are reported.     

Flow-injection determination of l-tyrosine in serum with an immobilized tyrosinase reactor and fluorescence detection

Tyrosinase is immobilized on controlled-pore glass beads and packed into a stainless-steel column (5 cm × 4 mm i.d.). Serum is deproteinized with tungstate and sulphuric acid. The carrier stream is 0.3 M phosphate buffer (pH 7.2), and is mixed with 5 M potassium hydroxide after the enzyme reactor. The fluorescent dihydroxyindole formed is detected at 490 nm (excitation at 375 nm). The calibration graph is linear for 1 × 10^?7 ?1 × 10^?4 M tyrosine; the detection limit is 2 × 10^?8 M.     

A multivariate calibration procedure for the tensammetric determination of detergents

A multivariate calibration procedure based on singular value decomposition (SVD) and the Ho-Kashyap algorithm is used for the tensammetric determination of the cationic detergents Hyamine 1622, benzalkonium chloride (BACl), N-cetyl-N,N,N-trimethylammonium bromide (CTABr) and mixtures of CTABr and BACl. The sensitivity and accuracy depend strongly on the nature of the detergent. Acceptable accuracy is obtained with a two-step calculation procedure in which calibration constants for the total concentration range of interest are used to guide the choice of a more specific set of calibration constants which are valid for a much smaller concentration span. For Hyamine 1622, concentrations in the range 5 × 10^?6?2 × 10^?4 M could be determined with an accuracy of ± 10^?6 M. For CTABr, these numbers were 3 × 10^?6?2 × 10^?4 M and ± 5 × 10^?7 M; for BACl, they were 2 × 10^?3?9 × 10^?2 g l^?1 and ± 1 × 10^?3 g l^?1. In the mixtures of CTABr and BACl, the accuracies were ± 3 × 10^?6 M and × 1 × 10^?3 g l^?1, respectively.     

Simultaneous Square‐Wave Voltammetric Determination of Paracetamol,Caffeine and Orphenadrine in Pharmaceutical Formulations Using a Cathodically Pretreated Boron‐Doped Diamond Electrode

An electroanalytical method for the simultaneous determination of paracetamol (PAR), caffeine (CAF), and orphenadrine (ORPH) using the square‐wave voltammetry (SWV) and a cathodically pretreated boron‐doped diamond electrode was developed. The method exhibits linear responses to PAR, CAF, and ORPH in the concentration ranges 5.4×10^?7–6.1×10^?5 M, 7.8×10^?7–3.5×10^?5 M, and 7.8×10^?7–3.5×10^?5 M, respectively, with detection limits of 2.3×10^?7 M, 9.6×10^?8 M, and 8.4×10^?8 M, respectively. The proposed method was successfully applied in the simultaneous determination of these analytes in pharmaceutical formulations.     

Indirect Differential Pulse Voltammetric Determination of Aluminum Biological Samples in the Presence of 3, 4-Dihydroxyphenylalanine

ABSTRACT

Indirect differential pulse voltammetric (DPV) determination of aluminum in the presence of 3, 4-dihydroxyphenylalanine (L-dopa) with glass carbon electrode as working electrode has been described. The method relies on the decrease of DPV anodic peak current of L-dopa with the addition of Al^III The decreasing value of the peak current is linear with the increase of Al^III concentration. Under the optimum experimental conditions (pH 4.8, 6×10^?4 M L-dopa, 0.06M NaAc - HAc ¹buffer solution), the linear ranges are 4.0×10^?7 - 5.2×10^?6 M and 7.2×10^?6 - 4.5×10^?5 M. The relative standard deviation for 8×10^?6 M aluminum is 1.0% (n = 8) and the detection limit is 3.5×10^?7 M. A number of foreign species for interference have been studied. The method has been applied to determine aluminum in drinking water, synthetic renal dialysate and urine samples.     

Sensitive spectrophotometric detection of dopamine,levodopa and adrenaline using surface plasmon resonance band of silver nanoparticles

A simple and effective procedure is proposed for spectrophotometric determination of catecholamines; Dopamine (1), L-Dopa (2) and Adrenaline (3). It was found that the reduction of Ag⁺ to silver nanoparticles (Ag-NPs) by these catecholamines in the presence of polyvinylpyrrolidone (PVP) as a stabilizing agent produced very intense surface plasmon resonance peak of Ag-NPs. The plasmon absorbance of the Ag-NPs allows the quantitative spectrophotometric detection of the catecholamines. The calibration curves derived from the changes in absorbance at λ = 440 nm were linear with concentration of Dopamine, Levodopa and Adrenaline in the range of 3.2×10^?6? 2.0×10^?5 M, 1.6×10^?7 ? 1.0×10^?5 M, 1.5×10^?6? 4.0×10^?5 M, respectively. The detection limits (3σ) were 1.2×10^?6 M, 8.6 ×10^?8 M, 9.7 ×10^?7 M for the Dopamine, L-Dopa and Adrenaline, respectively. The method was applied successfully to the determination of catecholamines in Ringer’s injection serum.     

Electrochemical investigation and determination of ceftazidime in pharmaceutical dosage forms and human urine

A voltammetric study of the oxidation of Ceftazidime (CEFT) has been carried out at the glassy carbon electrode by cyclic, differential pulse (DPV) and square wave (SWV) voltammetry. The oxidation of CEFT was irreversible and exhibited diffusion controlled process depending on pH. The oxidation mechanism was proposed and discussed. According to the linear relationship between the peak current and concentration, DPV and SWV voltammetric methods for CEFT assay in pharmaceutical dosage forms and human urine were developed. For analytical purposes, a well resolved diffusion controlled voltammetric peak was obtained in 0.1 M H₂SO₄ at 1.00 and 1.02 V for differential pulse and square wave voltammetric techniques, respectively. The linear response was obtained within the range of 4 × 10^?6?8 × 10^?5 M with a detection limit of 6 × 10^?7 M for differential pulse and 4 × 10^?6–2 × 10^?4 M with a detection limit of 1 × 10^?6 M for square wave voltammetric technique. The determination of CEFT in 0.1 M H₂SO₄ was possible over the 2 × 10^?6–1 × 10^?4 M range in urine sample for both techniques. The standard addition method was used for the recovery studies.     

Potentiometric sensors based on organic ion exchangers for determining tetraalkylammonium salts

Potentiometric sensors with plasticized polymer membranes based on organic ion exchangers, tetraalkylammonium dodecyl sulfates (benzyldimethyldodecylammonium, benzyldimethyltetradecylammonium, dimethyldistearylammonium), have been proposed for the determination of quaternary ammonium salts in model solutions and KATAPAV technical solutions. The thermal stability, composition, and solubility product have been estimated. It has been shown that ion associates are stable to 60?C70°C, K _S varies in the range from 2 × 10^?8 to 5 × 10^?10. The basic electrochemical parameters of the sensors have been determined as well, such as linearity ranges of the electrode function (5 × 10^?5 (5 × 10^?6)?1 × 10^?2 (1 × 10^?3) M) and slopes of the electrode functions (47?C59 mV/pc), response time (60?C90 sec), potential drift (2?C3 mV/day), operation period (3?C4 months), limits of detection for tetramethylammonium salts (1 × 10^?5?4 × 10^?7 M).     

Ionic liquids with an anion of N-lauroyl sarcosinate in membranes of ion-selective electrode

The study considers solubility in water, extractivity, and electrode properties of ionic liquids (IL), lauroyl tetrahexylammonium (THALS) and tetraoctylammonium lauroyl sarcosinate (TOALS). The values of solubility, found by potentiometry using ion-selective membranes of PVC-electrodes (ISE) have appeared to be 3.0 ± 0.4 mM and 0.011 ± 0.005 mM, for THALS and TOALS, respectively. Both IL quantitatively recover nitrophenol (99.9%) into chloroform from aqueous solutions in the pH range from 2 to 12. The application of IL as the active components of PVC-ISE enables the determination of lauroyl sarcosinate anion in the concentration range 1 × 10^?2?C1 × 10^?4 M for THALS and 1 × 10^?2?C1 × 10^?5 M for TOALS and the determination of mononitrophenols, 2,4-dinitrophenols and picrates (1 × 10^?2 M?C1 × 10^?5 M). A solid-state sensor based on screen-printed electrode modified by TOALS IL has been proposed. The electrode has been used for the determination of 4-nitrophenol in the concentration range 1 × 10^?2?C1 × 10^?5 M, the operational stability of the electrode is 10 days.     

Determination of acetaldehyde by a chemiluminescence method

The determination of acetaldehyde was achieved by monitoring the chemiluminescence emission from the luminol-potassium hexacyanoferrate (III) reaction in the presence of xanthine oxidase. The linear range was three orders of magnitude, the detection limit (2σ) was 4 × 10^?7 M and the relative standard deviation (n = 5) was 10.6% for 4.3 × 10^?7 M. No interference was observed from seven organic and inorganic species at a 1000-fold excess relative to a concentration of 1 × 10^?5 M acetaldehyde.     

Development of an Amperometric Enzymatic Biosensor Based on Gold Modified Magnetic Nanoporous Microparticles

Gold modified nanoporous silica based magnetic microparticles have been prepared as support for the immobilization of the enzyme horseradish peroxidase (HRP). The enzyme modified gold microparticles were retained onto the surface of a solid carbon paste electrode with the help of a permanent magnet. The analytical performances of the resulting biosensor were characterized by studying hydroquinone (HQ) and hydrogen peroxide. The former was monitored by the direct electroreduction of the biocatalytically generated quinone. Several experimental parameters influencing the biosensor response were investigated. A linear response to HQ was obtained in the concentration range comprised between 5×10^?7 and 4.5×10^?6 M with a detection limit of 4×10^?7 M. The enzyme electrode provided a linear response to hydrogen peroxide over a concentration range comprised between 5×10^?7?1.3×10^?4 M with a detection limit of 4×10^?7 M. The inhibition of the biosensor response in the presence of thiols e.g. cysteine, captopril, glutathione and Nacystelyn (NAL) has been pointed out.     

Effect of biogenic photochromic electron acceptors on chlorophyll fluorescence

It is shown that the photophysical properties of chlorophyll a (Chl) depend on the nature and relative amounts of 2-methyl-1,4-naphthoquinone (MNQ) and nicotinamide adenine dinucleotide phosphate (NADP). Photoinduced charge separation occurs in aqueous ethanol solutions of Chl (1 × 10^?5 M) and NADP (5 × 10^?6–5 × 10^?4 M), resulting in the dynamic quenching of Chl fluorescence. Coordination interaction between Chl and NADP is established at an NADP concentration of ≥5 × 10^?4 M. The nonlinear Stern-Volmer dependence in this range is due to the input from static quenching. It is shown that the quenching of Chl fluorescence in an MNQ solution at Chl and MNQ concentrations of 1 × 10^?5 M and 6.7 × 10^?5–1 × 10^?4 M, respectively, is described by a linear dependence in the Stern-Volmer coordinates; no complex formation is observed for Chl and MNQ under these conditions, and electron transfer is of the dynamic type. Static or mixed-type energy transfer from MNQ to Chl dominates at elevated MNQ concentrations.     

Electrochemical determination of tyrosine in the presence of uric acid at a carbon paste electrode modified with multi-walled carbon nanotubes enhanced by sodium dodecyl sulfate

Tyrosine (Tyr) was quantitated with high sensitivity and selectivity in the presence of uric acid (UA) using a carbon paste electrode modified with multi-walled carbon nanotubes. Tyr and UA were catalytically oxidized with diffusion-controlled characteristics. They were determined simultaneously by differential pulse voltammetry with a potential difference of 350 mV. The electrocatalytic currents increase linearly with Tyr and UA concentrations 4×10^?7?1×10^?4 M and 3×10^?7?2×10^?4 M. Their detection limits were 1×10^?7 and 5.1×10^?8 M respectively. In the presence of sodium dodecyl sulfate the Tyr detection limit improved from 1×10^?7 to 6.9×10^?8 M. The electrode was successfully used to quantitate Tyr and UA in serum.      

The application of 2,4,6-trinitrobenzene-1-sulphonic acid in the differential pulse polarographic determination of amines

The differential pulse polarographic behaviour of 2,4,6-trinitrophenyl (TNP) derivatives of several primary amines and amino acids was investigated in the presence of sulphite ion. All the derivatives produced a polarographic peak for their complexes with sulphite (1 × 10^?2 M) in pH 8.0 phosphate buffer (0.05 M)/0.1 M potassium chloride. The derivatives of proteins and peptides did not give such a peak. A 5-min reaction time at room temperature (or 50°C for lysine) and pH 10.5 using 1 × 10^?4 M 2,4,6-trinitrobenzene-1-sulphonic acid provides the optimal conditions for the determination of 5 × 10^?6?2.5 × 10^?5 M amines. The relative standard deviation for determining 1 × 10^?5 M glycine (n = 5) was 1%.     

Carbon Paste Electrode Incorporating 1‐[4‐(Ferrocenyl Ethynyl) Phenyl]‐1‐Ethanone for Electrocatalytic and Voltammetric Determination of Tryptophan

A carbon paste electrode spiked with 1‐[4‐ferrocenyl ethynyl) phenyl]‐1‐ethanone (4FEPE) was constructed by incorporation of 4FEPE in graphite powder‐paraffin oil matrix. It has been shown by direct current cyclic voltammetry and double step chronoamperometry that this electrode can catalyze the oxidation of tryptophan (Trp) in aqueous buffered solution. It has been found that under optimum condition (pH 7.00), the oxidation of Trp at the surface of such an electrode occurs at a potential about 200 mV less positive than at an unmodified carbon paste electrode. The kinetic parameters such as electron transfer coefficient, α and rate constant for the chemical reaction between Trp and redox sites in 4FEPE modified carbon paste electrode (4FEPEMCPE) were also determined using electrochemical approaches. The electrocatalytic oxidation peak current of Trp showed a linear dependent on the Trp concentrations and linear calibration curves were obtained in the ranges of 6.00×10^?6 M–3.35×10^?3 M and 8.50×10^?7 M–6.34×10^?5 M of Trp concentration with cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods, respectively. The detection limits (3σ) were determined as 1.80×10^?6 M and 5.60×10^?7 M by CV and DPV methods. This method was also examined as a selective, simple and precise new method for voltammetric determination of tryptophan in real sample.     

Determination of Methimazole and Carbimazole Using Polarography and Voltammetry

Abstract

Anodic waves of methimazole (I) (1-methylimidazole-2-thiol) and carbimazole (II) (1-ethoxycarbonyl-3-methyl-2-thio-4-imidazoline) on mercury electrodes correspond to mercury salt formation. Both compounds form in the thiono form a soluble complex at pH < 6, compound (I) at higher pH-values a slightly soluble salt of the thiol form. Electrode processes involving the thiol form are complicated by adsorption. Oxidation at solid electrodes occurs only at potentials more than 0.5 V more positive. For compound (I) spectrophotometry indicated pK_a=12.0 ± 0.2. By d.c. polarography in 0.1 M H₂SO₄ containing 10% ethanol the determination of both compounds is possible between 4 × 10^? and 1 × 10^?3 M, by differential pulse polarography between 1 × 10^? and 1 × 10^?4 M, by differential pulse voltammetry at HMDE between 5 × l0^?7 and 6 × 10^? M.     

Optical Determination of Glucose with Glucose Oxidase Immobilized in PVC together with Fluorescent Oxazol‐5‐One Derivatives

Abstract

Fully reversible biosensors for glucose monitoring based on solid polyvinylchloride (PVC) films where the enzyme glucose oxidase (GOx) was incorporated together with 2‐phenyl‐4‐[4‐(1,4,7,10‐tetraoxa‐13‐azacyclopentadecyl)benzylidene]‐5‐oxazolone (CPO‐1), 2‐(3,5‐dinitrophenyl)‐4‐[4‐(1,4,7,10‐tetraoxa‐13‐azacyclopentadecyl)benzylidene]‐5‐oxazolone (CPO‐2), 2‐(4‐nitrophenyl)‐4‐[4‐(1,4,7,10‐tetraoxa‐13‐azacyclopentadecyl)benzylidene]‐5‐oxazolone (CPO‐3) and 2‐(4‐tolyl)‐4‐[4‐(1,4,7,10‐tetraoxa‐13‐azacyclopentadecyl)benzylidene]‐5‐oxazolone (CPO‐4) derivatives have been developed. The limit of detection (LOD) values for glucose were found to be 1.47×10^?5 M, 2.01×10^?5 M, 0.89×10^?5 M, and 0.12×10^?5 M for CPO‐1, CPO‐2, CPO‐3, and CPO‐4, respectively (n=7). Sensor films were found to have excellent photostability.     

Spectrofluorimetric method for the determination of uric acid in human serum

A new spectrofluorimetric method is described for the determination of uric acid (UA), that can remarkably reduce the fluorescence intensity of the enoxacin (ENX)-terbium ion (Tb³⁺) complex at 545 nm. The reduced fluorescence intensity of Tb³⁺ ion at pH 5.7 is proportional to the concentration of UA. Optimum conditions for the determination of UA have been investigated. The linear range and detection limit for the determination of UA are 6.0 × 10^?7–3.0 × 10^?5 M and 1 × 10^?7 M, respectively. The relative standard deviation (RSD) was 0.4% for 6 × 10^?6 M UA (n = 11). The method is simple, practical and relatively free of interferences. It has been successfully applied to assess UA in serum at the level of 3 × 10^?4 M with an RSD of 5–7% (n = 3). The results were evaluated by comparison with a common clinical spectrophotometric method using phosphotungstic acid as developer.     

Peroxide optrode based on micellar-mediated chemiluminescence reaction of luminol

Cetyltrimethylammonium bromide (CTAB) was used to overcome the pH mismatch of the luminol (5-amino-2,3-dihydrophthalazine-1,4-dione ) chemiluminescence reaction when coupled to the glucose/glucose oxidase reaction at neutral pH. The results demonstrate the feasibility of conducting both reactions simultaneously and efficiently at pH 7.5–8.5. The incorporation of the CTAB micellar system in the coupled luminol/enzymatic reaction allows quantification of glucose in the 3 × 10^?7?3 × 10^?4 M range. The relative standard deviation (RSD) for 5 replicates of 5 × 10^?5 M glucose was 3.8%. Also, hydrogen peroxide was quantified in the 1.2 × 10^?4?2.4 × 10^?8 M range with RSD 2.6%. The micellar-mediated luminol reaction was applied successfully to the determination of glucose in blood serum. Excellent agreement with reported results by standard assays was obtained.