FT-Raman and FTIR spectra, assignments and ab initio calculations of 2-aminobenzyl alcohol

The Fourier transform Raman and Fourier transform infrared spectra of 2-aminobenzyl alcohol (2ABA) were recorded in the solid phase. Geometry optimizations were done with out any constraint and harmonic vibrational wave numbers and several thermodynamic parameters were calculated for the minimum energy conformer at ab initio and DFT levels invoking 6-31g** and 6-311+g(2d, p) basis sets and the results were compared with the experimental values. With the help of three specific scaling procedures, the observed vibrational wavenumbers in FTIR and FT-Raman spectra were analyzed and assigned to different normal modes of the molecule. Most of the modes have wavenumbers in the expected range and the error obtained was in general very low. The appropriate theoretical spectrograms for the Raman and IR spectra of 2ABA were also constructed.     

Density functional theory study of the fourier transform infrared and Raman spectra of dichloro-bis(2,4-pentanedionate)tin(IV).

Fourier transform infrared and Fourier transform Raman spectra of dichloro-bis(2,4-pentanedionate)tin(IV) have been obtained. Density functional theory (DFT) BLYP calculations, have been carried out with the purpose of understanding the metal-ligand region spectra of this compound. Vibrational wavenumbers calculated by BLYP/6-31G* force fields are closed with the experimental results. The percentage of deviation of the bond lengths and bond angles gives a good picture of the normal modes, and serves as a basis for the assignment of the wavenumbers. The calculated geometrical parameters show slight differences compared with the experimental ones, and these differences can be explained by the different physical state of Sn(acac)2Cl2. The DFT-BLYP calculations assumed a free molecule in the gas phase. The experimental wavenumbers are obtained from the spectra of solid samples.     

FT-IR, NIR-FT-Raman and gas phase infrared spectra of 3-aminoacetophenone by density functional theory and ab initio Hartree-Fock calculations

The gas phase infrared spectrum of 3-aminoacetophenone (3AAP) was measured in the range 5000-500cm(-1) and with a resolution of 0.5cm(-1). The Fourier transform Raman (FT-Raman) and Fourier transform infrared (FT-IR) spectra of 3AAP were recorded in the solid phase. Geometry optimizations were done without any constraint and several thermodynamic parameters were calculated for the minimum energy conformer at ab initio and density functional theory (DFT) levels invoking 6-311G(2df 2p) basis set and the results are compared with the experimental values. Harmonic-vibrational wavenumber was also calculated for the minimum energy conformer at ab initio and DFT levels using 6-31G(d,p) basis set and the results are compared with related molecules. With the help of specific scaling procedures, the observed vibrational wavenumbers in gas phase, FT-IR and FT-Raman spectra were analyzed and assigned to different normal modes of the molecule. Most of the modes have wavenumbers in the expected range, the error obtained was in general very low. The appropriate theoretical spectrogram for the FT-IR spectra of the title molecule is also constructed.     

FT-Raman and FT-IR spectra, vibrational assignments and density functional studies of 5-bromo-2-nitropyridine

The Fourier transform Raman and Fourier transform infrared spectra of 5-bromo-2-nitropyridine were recorded in the solid phase. The equilibrium geometry, natural atomic charges, harmonic vibrational frequencies, infrared intensities and Raman scattering activities were calculated by density functional B3LYP method with the 6-311++G(d,p) basis set. The scaled theoretical wavenumbers showed very good agreement with the experimental values. A detailed interpretations of the infrared and Raman spectra of 5-bromo-2-nitropyridine is reported on the basis of the calculated potential energy distribution (PED). The theoretical spectrograms for the Raman and IR spectra of the title molecule have been constructed.     

Density functional theory study of the Fourier transform infrared and Raman spectra of Cu(II) bis-acetylacetone

Fourier transform infrared and Fourier transform Raman spectra of Cu(II) bis-acetylacetone have been obtained. The geometry, frequency and intensity of the vibrational bands of this compound and its 1,5-(13)C(2), 3-(13)C, 1,3,5-(13)C(3), 2,4-(13)C(2), (18)O(2) and 2,4-(13)C(2)-(18)O(2) derivatives were obtained by the density functional theory (DFT) with the B3LYP functional and using the 6-31G(*) and 3-21G(*) basis sets. The calculated frequencies are compared with the solid infrared and Raman spectra. All the measured infrared and Raman bands were interpreted in terms of the calculated vibrational modes. The percentage of deviation of the bond lengths and bond angles gives a good picture of the normal modes, and serves as a basis for the assignment of the wavenumbers. Most computed bands are predicted to be at higher wavenumbers than the experimental bands. The calculated geometrical parameters show slight differences compared with the experimental results. These differences can be explained by the different physical state of Cu(II) bis-acetylacetone. The DFT-B3LYP calculations assumed a free molecule in the gas phase. Analysis of the vibrational spectra indicates a strong coupling between the chelated ring modes.     

Vibrational spectra and assignments of 2-amino-5-iodopyridine by ab initio Hartree-Fock and density functional methods

The Fourier transform Raman and Fourier transform infrared spectra of 2-amino-5-iodopyridine were recorded in the solid phase. The equilibrium geometry, harmonic vibrational frequencies, infrared intensities and Raman scattering activities were calculated by HF and DFT (B3LYP) methods with the 6-31G(d,p) basis set for C, N, H and LANL2DZ pseudopotential for I. The scaled theoretical wavenumbers showed very good agreement with the experimental ones. A detailed interpretation of the infrared and Raman spectra of 2-amino-5-iodopyridine is reported on the basis of the calculated potential energy distribution. The theoretical spectrograms for the IR spectrum of the title molecule have been constructed.     

DFT and ab initio quantum chemical studies on p-cyanobenzoic acid

The Fourier transform infrared (FTIR) and FT-Raman spectra of p-cyanobenzoic acid (CBA) have been recorded in the range 4000-400 and 4000-100 cm(-1), respectively. The complete vibrational assignment and analysis of the fundamental modes of the compound were carried out using the observed FTIR and FT-Raman data. The vibrational frequencies determined experimentally were compared with theoretical wavenumbers obtained from ab initio HF and DFT-B3LYP gradient calculations employing 6-31G**, 6-311++G** and cc-pVTZ basis sets for the optimised geometry of the compound. The geometry and normal modes of vibration obtained from the HF and DFT methods are in good agreement with the experimental data. The normal coordinate analysis was also carried out with ab initio force fields utilising Wilson's FG matrix method. The interactions of cyano and carboxylic acid groups with the skeletal vibrational modes were investigated.     

Structural, vibrational and quantum chemical investigations on 5-chloro-2-hydroxybenzamide and 5-chloro-2-hydroxybenzoic acid

The Fourier transform infrared (FTIR) and FT-Raman spectra of 5-chloro-2-hydroxybenzamide (5CBA) and 5-chloro-2-hydroxybenzoic acid (5C2HBA) have been recorded in the range 4000-400 and 4000-100 cm(-1), respectively. The complete vibrational fundamental modes of the compounds were assigned and analysed using the observed FTIR and FT-Raman data. The vibrational frequencies determined experimentally were compared with the theoretical wavenumbers calculated from ab initio HF and DFT-B3LYP gradient methods employing 6-31G** and 6-311++G** basis sets. The effect of halogen, hydroxyl groups and hydrogen bonding on the characteristic frequencies of the -COOH and -CONH2 group frequencies have been investigated. In 5CBA and 5C2HBA intramolecular hydrogen bond between a hydroxyl group and CO group makes a six membered ring, which causes the O?H interaction onto the resonance of the benzene ring. Comparison of the positions of the ν(OH) bands shows the ν(OH) band of 5CBA is located at considerably higher frequency which confirms a weaker hydrogen bond than in 5C2HBA.     

Vibrational spectroscopy investigation using ab initio and density functional theory analysis on the structure of 5-amino-o-cresol

The Fourier transform Raman and Fourier transform infrared spectra of 5-amino-o-cresol (5AOC) were recorded in the solid phase. The equilibrium geometry, harmonic vibrational frequencies, infrared intensities and Raman scattering activities were calculated by HF and density functional B3LYP method with the 6-311G(d,p) basis set. The scaled theoretical wavenumbers showed very good agreement with the experimental values. The thermodynamic functions of the title compound were also performed at HF/6-311G(d,p) and B3LYP/6-311G(d,p) levels of theory. A detailed interpretation of the infrared and Raman spectra of 5-amino-o-cresol is reported. The theoretical spectrograms for FT-IR spectra of the title molecule have been constructed.     

A combined experimental and theoretical quantum chemical studies on 4-morpholinecarboxaldehyde

Extensive spectroscopic investigations have been carried out by recording the Fourier transform infrared (FTIR) and FT-Raman spectra and carrying out the theoretical quantum chemical studies on 4-morpholinecarboxaldehyde (4MC). From the ab initio and DFT analysis using HF, B3LYP and B3PW91 methods with 6-31G(d,p) and 6-311G++(d,p) basis sets the energies, structural, thermodynamical and vibrational characteristics of the compound were determined. The energy difference between the chair equatorial and chair axial conformers of 4MC have been calculated by density functional theory (DFT) method. The optimised geometrical parameters, theoretical wavenumbers and thermodynamic properties of the molecule were compared with the experimental values. The effect of carbonyl group on the characteristic frequencies of the morpholine ring has been analysed. The mixing of the fundamental modes with the help of potential energy distribution (PED) through normal co-ordinate analysis has been discussed.     

Spectroscopic and quantum chemical studies on 4-acryloyl morpholine

Fourier transform infrared (FTIR) and FT-Raman spectra have been recorded and an extensive spectroscopic investigations have been carried out on 4-acryloyl morpholine (4AM). Theoretical quantum chemical studies have also been performed. From the ab initio and DFT analysis using HF, B3LYP and B3PW91 methods with 6-31G(d,p) and 6-311G++(d,p) basis sets the energies, structural, thermodynamical and vibrational characteristics of the compound were determined. The energy difference between the chair equatorial and chair axial conformers of 4AM have been calculated by density functional theory (DFT) method. The optimized geometrical parameters, theoretical wavenumbers and thermodynamic properties of the molecule are compared with the experimental values. The effect of acryloyl group on the characteristic frequencies of the morpholine ring has been analysed. The mixing of the fundamental modes with the help of potential energy distribution (PED) through normal co-ordinate analysis has been discussed.     

Vibrational assignment, structure and intramolecular hydrogen bond study of 3-amino-1-phenyl-2-buten-1-one

Fourier transform infrared and Fourier transform Raman spectra of 3-amino-1-phenyl-2-buten-1-one and its deuterated analogue were recorded in the regions 400-4,000 and 150-4,000 cm(-1), respectively. Furthermore, the molecular structure and vibrational frequencies of title compound were investigated by a series of density functional theoretical, DFT, and ab initio calculations at the post-Hartree-Fock (MP2) level. Although, the calculated frequencies are generally in agreement with the observed spectra but the DFT results are in much better quantitative agreement with the observed spectra than the MP2 results. The observed wavenumbers were analyzed and assigned to different normal modes of vibration of the molecule. The calculated geometrical parameters show a strong intramolecular hydrogen bond with a N...O distance of 2.621-2.668 A. This bond length is shorter than that of its parent, 4-amino-3-penten-2-one (with two methyl groups in the beta-position), which is in agreement with spectroscopic results. The topological properties of the electron density contributions for intramolecular hydrogen bond in 3-amino-1-phenyl-2-buten-1-one and 4-amino-3-penten-2-one have been analyzed in term of the Bader theory of atoms in molecules (AIM). These results also support the stronger hydrogen bond in the title compound with respect to the parent molecule.     

Vibrational spectra and quantum chemical calculations of 3,4-diaminobenzoic acid.

The Fourier Transform Raman and Fourier Transform infrared spectra of 3,4-diaminobenzoic acid (3,4-DABA) were recorded in the solid phase. Geometry optimizations were done without any constraint and harmonic-vibrational wave numbers and several thermodynamic parameters were calculated for the minimum energy conformer at ab initio and DFT levels invoking 6-311++G(d,p) basis set. The results were compared with the experimental values with the help of specific scaling procedures, the observed vibrational wavenumbers in FT-IR and FT-Raman spectra were analyzed and assigned to different normal modes of the molecule. Most of the modes have wavenumbers in the expected range, the error obtained was in general very low. The appropriate theoretical spectrograms for the IR and Raman spectra of the title molecule were also constructed.     

Vibrational assignment of the normal modes of 2-phenyl-4-(4-methoxy benzylidene)-2-oxazolin-5-one via FTIR and Raman spectra, and ab inito calculations

Raman and FTIR spectra of 2-phenyl-4-(4-methoxy benzylidene)-2-oxazolin-5-one were recorded in the regions, 100-3300 and 400-4000 cm(-1), respectively. Vibrational frequencies and intensities of the fundamental modes of this hetrocyclic organic molecule were computed using ab initio as well as AM1 semiempirical molecular orbital methods. Ab initio calculations were carried out with basis set up to RHF/6-311G. Conformational studies regarding the effect of moving the methoxy group in the 2-phenyl-4-(4-methoxy benzylidene)-2-oxazolin-5-one molecule to a different position on the ring was also carried out. Observed vibrational wavenumbers were found to be mostly consistent with ab initio values. The most intense mode of vibration observed at 1250 cm(-1) in Raman spectra, also observed as a strong band in FTIR, was assigned as C-O stretching vibration in the methoxy group. Asymmetric stretching vibrations between CC and CN bonds was predicted as most intense mode by our ab initio calculation.     

FT-IR, FT-Raman spectra and ab initio DFT vibrational analysis of p-bromophenoxyacetic acid

The Fourier transform Raman and Fourier transform infrared spectra of p-bromophenoxyacetic acid were recorded in the solid phase. The equilibrium geometry, harmonic vibrational frequencies, infrared intensities and Raman scattering activities were calculated by HF and DFT (B3LYP) method with the 6-31G(d,p) basis set. The scaled theoretical wavenumbers showed very good agreement with the experimental ones. A detailed interpretation of the infrared and Raman spectra of p-bromophenoxyacetic acid is reported on the basis of the calculated potential energy distribution. The theoretical spectrograms for the IR spectrum of the title molecule have been constructed.     

FTIR and FT Raman, molecular geometry, vibrational assignments, ab initio and density functional theory calculations for 1,5-methylnaphthalene

The FTIR and FT Raman vibrational spectra of 1,5-methylnaphthalene (1,5-MN) have been recorded using Brunker IFS 66 V Spectrometer in the range 3600-10 cm(-1) in the solid phase. A detailed vibrational spectral analysis has been carried out and assignments of the observed fundamental bands have been proposed on the basis of peak positions and relative intensities. The Optimized molecular geometry, harmonic frequencies, electronic polarizability, atomic charges, dipole moment, rotational constants and several thermodynamic parameters in the ground state were calculated using ab initio Hartree Fock (HF) and density functional B3LYP methods (DFT) with 6-311++ G(d) basis set. With the help of different scaling factors, the observed vibrational wavenumbers in FTIR and FT Raman spectra were analyzed and assigned to different normal modes of the molecule. Most of the modes have wavenumbers in the expected range. The results of the calculations were applied to simulated infrared and Raman spectra of the title compound which showed excellent agreement with the observed spectra.     

Synthesis, Fourier transform infrared and Raman spectra, assignments and analysis of N-(phenyl)- and N-(chloro substituted phenyl)-2,2-dichloroacetamides

N-(phenyl)-2,2-dichloroacetamide (NPA) and N-(chloro substituted phenyl)-2,2-dichloroacetamides of the configuration XyC6H(5-y)-NHCO-CHCl2 (where, X = Cl and y = 1, 2 and 3) were synthesised and the Fourier transform infrared (FTIR) and Fourier transform Raman (FT-Raman) spectra of the compounds were recorded and analysed. The FTIR spectra of all the compounds were recorded in a Bruker IFS 66V spectrometer in the range of 4000-400 cm(-1) and the FT-Raman spectra were also recorded in the same instrument in the region 3500-100 cm(-1). The variation of an amide bond (-NHCO-) parameters with the substitution of the chlorine atom in the phenyl group and the mixing of different normal modes are discussed with the help of potential energy distribution (PED) calculated through normal co-ordinate analysis.     

Fourier-transform infrared and optical absorption spectra of 4-tricyanovinyl-N,N-diethylaniline thin films

Thin films of 4-tricyanovinyl-N,N-diethylaniline (TCVA) were prepared for the first time using thermal evaporation technique. The molecular structure and electronic transitions of TCVA films were investigated by Fourier-transform infrared (FTIR) and ultraviolet-visible (UV-vis) spectra. The observed vibrational wavenumbers in FTIR spectra were analysed and assigned to different normal modes of the molecule. UV-vis electronic absorption spectral measurements of TCVA films were analysed to obtain the electronic transitions and optical band gap (E(g)). Other important optical parameters such as molar extinction coefficient (varepsilon(molar)), the oscillator strength (f), and the electric dipole strength (q(2)) were also reported.     

3,5-Difluorobenzonitrile: ab initio calculations,FTIR and Raman spectra

Geometry, vibrational wavenumbers and several thermodynamic parameters were calculated using ab initio quantum chemical methods for the 3,5-difluorobenzonitrile molecule. The results were compared with the experimental values. With the help of three specific scaling procedures, the observed vibrational wavenumbers in FTIR and Raman spectra were analysed and assigned to different normal modes of the molecule. Most of the modes have wavenumbers in the expected range and the error obtained was in general very low. Using PEDs the contributions were determined for the different modes to each wavenumber. From the PED, it is apparent that the frequency corresponding to C[triple bond]N stretching contains 87% contribution from the C[triple bond]N stretching force constant and it mixes with the C-CN stretching mode 13 to the extent of 12%. Other general conclusions were also deduced.     

Ab initio, density functional theory and structural studies of 4-amino-2-methylquinoline

The Fourier transform infrared (FTIR) and FT-Raman spectra of 4-amino-2-methylquinoline (AMQ) have been recorded in the range 4000–400 and 4000–100 cm⁻¹, respectively. The experimental vibrational frequency was compared with the wavenumbers obtained theoretically by ab initio HF and DFT–B3LYP gradient calculations employing the standard 6-31G** and high level 6-311++G** basis sets for optimised geometry of the compound. The complete vibrational assignment and analysis of the fundamental modes of the compounds were carried out using the experimental FTIR and FT-Raman data, and quantum mechanical studies. The geometry and normal modes of vibration obtained from the HF and DFT methods are in good agreement with the experimental data. The potential energy distribution of the fundamental modes was calculated with ab initio force fields utilising Wilson's FG matrix method. The NH-π interactions and the influence of amino and methyl groups on the skeletal modes are investigated.