Convenient synthesis and anion recognition properties of N-flurobenzoyl-N′-phenylthioureas in water-containing media

Novel artificial anionic receptors N-flurobenzoyl-N′-phenylthioureas were synthesized by simple steps in good yields. The binding properties for anions of these N-flurobenzoyl-N′-phenylthioureas and 2N-benzoyl-N′-phenyl thiourea were examined by UV-vis and ¹H NMR spectroscopy. By fluorination of the benzoyl chromophore, the receptors had higher binding affinity for tested anions than the receptor 2. Especially, we studied the anion binding efficiency of the receptors 1N-(3-flurobenzoyl)-N′-phenylthiourea and 2 in dimethyl and dimethyl sulfoxide-water binary solutions in detail respectively. In pure dimethyl sulfoxide, the receptors 1 and 2 had higher binding affinity for F⁻ over AcO⁻. However, as the ratio of water to dimethyl sulfoxide increases, we found the binding properties for tested anions of 1 and 2 changed in dimethyl sulfoxide-water binary solutions. The receptor 1 showed high binding affinity and selective ability for AcO⁻ in dimethyl sulfoxide containing water with varied ratios.     

meso-Indanyl calix[4]pyrrole receptors

Two new meso-indanyl-substituted calix[4]pyrrole receptors, 2 and 3, have been synthesized. A range of calix[4]pyrrole host-neutral molecule complexes crystallise from solutions of 2 in a variety of solvents and the structures of four have been elucidated by X-ray crystallography. The F⁻ and Cl⁻ anion affinities of 2 have been measured in acetonitrile, and are significantly different from the corresponding affinities of the prototypical calix[4]pyrrole, the octamethyl-derivative, 1. ESI-FTICR-MS has been used to determine the relative F⁻ and Cl⁻ anion affinities of receptors 1 and 2 in methanol-acetonitrile solution. Deprotonation of 1 and 2 by fluoride is observed (under the conditions of the MS experiment).     

Anion recognition by d-ribose-based receptors

Anion recognition properties of d-ribose-based receptors α- and β-1 were measured by ¹H NMR in CDCl₃ and MeCN-d₃. Receptor β-1 showed effective binding with anions by cooperative hydrogen bonds of cis-diol. The anomeric isomer α-1 is a less effective anion receptor which has similar cis-diol as a recognition site, indicating that the stereo configuration of the anomeric position is of significant influence on the anion recognition ability.     

Syntheses and crystal structures of copper mixed-ligand complexes of multidentate enaminones and acetate anions

Reactions of ferrocenoylacetone with 2-(aminomethyl)pyridine and N-(2-hydroxyethyl)-1,2-diaminoethane afford the multidentate enaminones HL¹ and H₃L², respectively. Reactions of copper acetate with the two enaminones generate the corresponding mixed-ligand complexes I and II, which are formulated as [CuL¹(OAc)] and [Cu(H₂L²)(OAc)], respectively. The structures of HL¹, I and II have been determined by single-crystal X-ray crystallography. In complex I, HL¹ acts as a monoanionic tridentate donor via the carbonyl oxygen, deprotonated enamine nitrogen and pyridyl nitrogen atoms, the acetate anion is monodentate and the coordination geometry of the central metal is square planar. In complex II, H₃L² is a monoanionic tetradentate ligand via the carbonyl oxygen, deprotonated enamine nitrogen, secondary amine nitrogen and hydroxy oxygen atoms, the acetate anion is monodentate and the coordination geometry of the central metal is a distorted trigonal bipyramid.     

Synthesis, structures and rac/meso isomerization behaviour of bisplanar chiral bis(phosphino-η-indenyl)iron(II) complexes

Syntheses of the phosphinoindenes 1-(diphenylphosphino)-3-methylindene (1b), 3-(diphenylphosphino)-2-methylindene (1c), 1-(diphenylphosphino)-2,3-dimethylindene (1d), 4,7-dimethyl-3-(diphenylphosphino)indene (1e), 1-(diphenylphosphino)-3,4,7-trimethylindene (1f) and 3-(diisopropylphosphino)indene (1i) were carried out by treatment of the appropriate indenide with the appropriate chlorophosphine. The silylphosphinoindene 3-(diphenylphosphino)-1-(trimethylsilyl)indene (1h) was prepared by treatment of the indenide of 3-(diphenylphosphino)indene (1a) with trimethylsilylchloride. These indenes, in addition to 1a, were then used, after deprotonation with BuLi, to prepare the corresponding indenyl ferrocenes, 2a-2e, 2h and 2i, by treatment with ferrous chloride in a 2:1 ratio. These compounds were characterized by ¹H, ¹³C, and ³¹P NMR spectroscopy, as well as by mass spectrometry, except for the highly-sensitive diisopropylphosphine 2i that could only be characterized by ³¹P NMR spectroscopy. All of these ferrocene complexes are bisplanar chiral systems that can potentially form rac and meso isomers. In all cases both isomers were observed but for 2b and 2h only one could be isolated. The rac isomers of complexes 2a, 2b, 2d, and 2e, as well as the meso isomer of 2e, were studied by X-ray crystallography. Only complexes 2a and 2i were observed to undergo rac/meso isomerization processes at ambient temperature in THF solvent. We were unable to prepare the sterically congested hexamethylferrocene 2f. Generally, it was found that increasing substitution on the indenyl ring increases the reactivity and sensitivity of the ferrocene.     

Infinite chains constructed from flexible bis(benzimidazole)-based ligands

Two neutral ligands, L¹ · 2H₂O and L² · H₂O, and seven complexes, [Cu(pmb)₂(L¹)] (1), [Cu(pmb)₂(L²)] (2), [Cu(Ac)₂(L²)] · 4H₂O (3), [Cu(4-aba)₂(L²)] (4), [Ag(4-ts)(L¹)(H₂O)] (5), [Ag₂(epes)₂(L¹)] · 2H₂O (6), [Ag(1,5-nds)_0.5(L²)] · 0.5C₂H₅OH · H₂O (7) [where L¹ = 1,1′-(1,4-butanediyl)bis(2-methylbenzimidazole); L² = 1,1′-(1,4-butanediyl)bis(2-ethylbenzimidazole), pmb = p-methoxybenzoate anion; Ac = acetate anion; 4-aba = 4-aminobenzoate anion; 4-ts = p-toluenesulfonate anion; epes = N-(2-hydroxyethyl)piperazine-N′-(2-ethanesulfonate) anion; 1,5-nds = 1,5-naphthalenedisulfonate anion], have been synthesized and characterized by elemental analysis, IR, and single-crystal X-ray diffraction. The L¹ and L² ligands in compounds 1–7 act as bridging ligands, linking metal ions into chain structures. The chains in compounds 3, 4 and 6 interlace with each other by hydrogen bonds to generate 3D supramolecular structures. In compound 5, π–π interactions between adjacent L¹ ligands hold the chains to a supramolecular layer. In compound 7, the sulfonate anions act as counterions in the framework. The thermal stabilities of 3, 6 and 7, and the luminescent properties for 5–7 in the solid states are also discussed.     

Reaction of (1,3-dioxo-2,3-dihydro-1H-inden-2-ylidene)propanedinitrile with N-arylisoindolines

In a multistep reaction, 3,3′-(2-aryl-2H-isoindol-1,3-ylene)-di-(1,4-naphthoquinone-2-carbonitriles) 13a-f have been formed in 25-61% yield from a series of N-arylisoindolines 8a-f with (1,3-dioxo-2,3-dihydro-1H-inden-2-ylidene)propanedinitrile (1) in aerated pyridine. The structure of one of these products (13f) has been unambiguously confirmed by a single crystal X-ray structure analysis. Under otherwise the same conditions, 2-(3-methoxyphenyl)-isoindoline (8g) and 1 gave 38% of [4-(2,3-dihydro-1H-isoindol-2-yl)-2-methoxyphenyl]-1,3-dioxoindan-2-ylidene)acetonitrile (15). Rationales for these conversions involving the known rearrangement of the radical anion of 1 into the radical anion of 1,4-naphthoquinone-2,3-dicarbonitrile (3) are presented.     

Synthesis and conformational analysis of 1,3,2-diazaphosphorino[6,1-a]isoquinolines, a new ring system

Through ring-closure reactions of N- or 1′-substituted 1-(2′-aminoethyl)-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinolines (5a-e) with phenylphosphonyl dichloride, 1- or 3-substituted 4-phenyl-1,3,4,6,7,11b-tetrahydro-2H-1,3,2-diazaphosphorino[6,1-a]isoquinolin-4-one diastereomers (7a-e and 8a-c,e), the first representatives of a new ring system, were prepared. The diastereomeric ratios in the cyclizations and the conformer (A-E) populations of the nitrogen-bridged tricyclic systems (7 and 8) were strongly influenced by the N- and 1′-substituents of the starting diamines. The conformational analysis of compounds 7 and 8 was performed by ¹H, ¹³C and ³¹P NMR methods.     

Photoinduced cycloadditions of N-methyl-1,8-naphthalenedicarboximides with alkynes

Photoinduced cycloadditions of N-methyl-1,8-naphthalenedicarboximide 1 with phenylacetylenes 2a-2c, cyclopropylacetylene 2d, diphenylacetylenes 2e-2f and 1-phenylpropyne 2g were investigated. In the case of phenylacetylenes 2a, 2b and cyclopropylacetylene 2c, photoreaction with 1 takes place at the naphthalene C(1)C(2) bond to give the cyclobutene products. For 4-methoxyphenylacetylene 1c, the cyclobutene 3c is obtained together with the 4-benzo[a]thebenidinone 4c derived from a primary oxetene product formed by [2+2] addition of the imide carbonyl with the alkyne. Similar to 2c, photocycloaddition of 1 with 2e and 2f gave the cyclobutenes 7e, 7f, 8f and the 4-benzo[a]thebenidinone products 9e, 9f and 10f, respectively, derived from the corresponding oxetenes. Photoreaction of 1 with 2g gave cyclobutene 7g and benzo[a]thebenidinone 9g. Sensitization experiment and internal heavy atom effect study showed that these reactions proceed from the ππ* singlet excited state of 1. Estimation of the free energy change for electron transfer between ¹1* and the alkynes and the calculation of charge and spin density distribution in the anion radical of 1 and the cation radical of the alkynes suggested that the cyclobutene products are formed by direct [2+2] cycloaddition of ¹1* with the alkyne, while the formation of the oxetene products is the result of electron transfer interaction between ¹1* and the alkyne. The regioselectivity in the oxetene formation is accounted for by charge and spin density distribution in the anion radical of 1 and the cation radical of the alkyne.     

New receptors for anions in water: Synthesis, characterization, X-ray structures of new derivatives of 5,11,17,23-tetraamino-25,26,27,28-tetrapropyloxycalix[4]arene

Syntheses and characterization of ten new compounds from the calixarene family, cone - 5,11,17,23- tetrakis(2-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4a; cone - 5,11,17,23-tetrakis(3-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4b; cone - 5,11,17,23-tetrakis(4-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4c; cone - 5,11,17,23-tetrakis(ferrocenylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4d; cone - 5,11,17,23-tetrakis(2-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3a; cone - 5,11,17,23-tetrakis(3-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3b; cone - 5,11,17,23-tetrakis(4-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3c; cone - 5,11,17,23-tetrakis(ferrocenylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3d; cone - 5,11,17,23-tetrakis(2-thienylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3e and cone - 5,11,17,23-tetrakis(2-pyrrolylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3f are reported. The target compounds 4a-4d were designed to form complexes with anions based on hydrogen bonds and electrostatic interactions in acidic aqueous solutions and the interaction constant 1770 mol⁻¹ dm³ of a 1:1 complex was obtained for the interaction of 4c with sulfate anion in 5 × 10⁻³ M aqueous HCl. The solid state structures of the compounds 3b, 3e and 3f were determined, their stereochemistry and the stereochemistry of the calix[4]arene frame is generally discussed. Raman, infrared and UV-vis spectra of the target compounds and some intermediates are reported, too.     

Topological and metal ion effects on the anion binding abilities of new heteroditopic receptors derived from p-tert-butylcalix[4]arene

Two derivatives of p-tert-butylcalix[4]arenes 1 and 2 containing diethyl ester and amidoferrocene units as cation and anion binding sites, respectively, have been synthesized. Both compounds were isomeric with different topology for accommodating ions. ¹H NMR spectroscopy, cyclic voltammetry, and square-wave voltammetry were used to study the binding abilities of receptors 1 and 2 toward anions. Both receptors were found to bind Br⁻ and I⁻ selectively in the presence of Na⁺. The electrochemically oxidized ferrocenium form of para-isomer 2 in the free form was found to sense AcO⁻ selectively, but demonstrated a negative sensing in the presence of Na⁺. In contrast, the electrochemically oxidized ferrocenium form of meta-isomer 1 was found to enhance sensing of AcO⁻ and Cl⁻ in the presence of Na⁺.     

Synthesis and structural characterization of 1′-(diphenylphosphino)ferrocene-1-carboxamide, its corresponding hydrazide, some heterocycles derived from the hydrazide and palladium(II) complexes with these functional phosphinoferrocene ligands

Two polar phosphinoferrocene ligands, 1′-(diphenylphosphino)ferrocene-1-carboxamide (1) and 1′-(diphenylphosphino)ferrocene-1-carbohydrazide (2), were synthesized in good yields from 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) via the reactive benzotriazole derivative, 1-[1′-(diphenylphosphino)ferrocene-1-carbonyl]-1H-1,2,3-benzotriazole (3). Alternatively, the hydrazide was prepared by the conventional reaction of methyl 1′-(diphenylphosphino)ferrocene-1-carboxylate with hydrazine hydrate, and was further converted via standard condensation reactions to three phosphinoferrocene heterocycles, viz 2-[1′-(diphenylphosphino)ferrocen-1-yl]-1,3,4-oxadiazole (4), 1-[1′-(diphenylphosphino)ferrocen-1-carbonyl]-3,5-dimethyl-1,2-pyrazole (5), and 1-[1′-(diphenylphosphino)ferrocene-1-carboxamido]-3,5-dimethylpyrrole (6). Compounds 1 and 2 react with [PdCl₂(cod)] (cod = η²:η²-cycloocta-1,5-diene) to afford the respective bis-phosphine complexes trans-[PdCl₂(L-κP)₂] (7, L = 1; 8, L = 2). The dimeric precursor [(L^NC)PdCl]₂ (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹) is cleaved with 1 to give the neutral phosphine complex [(L^NC)PdCl(1-κP)] (9), which is readily transformed into a ionic bis-chelate complex [(L^NC)PdCl(1-κ²O,P)][SbF₆] (10) upon removal of the chloride ligand with Ag[SbF₆]. Pyrazole 5 behaves similarly affording the related complexes [(L^NC)PdCl(5-κP)] (12) and [(L^NC)PdCl(5-κ²O,P)][SbF₆] (13), in which the ferrocene ligand coordinates as a simple phosphine and an O,P-chelate respectively, while oxadiazole 4 affords the phosphine complex [(L^NC)PdCl(4-κP)] (11) and a P,N-chelate [(L^NC)PdCl(4-κ²N³,P)][SbF₆] (14) under similar conditions. All compounds were characterized by elemental analysis and spectroscopic methods (multinuclear NMR, IR and MS). The solid-state structures of 1⋅½AcOEt, 2, 7⋅3CH₃CN, 8⋅2CHCl₃, 9⋅½CH₂Cl₂⋅0.375C₆H₁₄, 10, and 14 were determined by single-crystal X-ray crystallography.     

Dual responsive chemosensors for anions: the combination of fluorescent PET (Photoinduced Electron Transfer) and colorimetric chemosensors in a single molecule

The design and synthesis of two novel fluorescent PET anion sensors is described, based on the principle of ‘fluorophore-spacer-(anion)receptor’. The sensors 1 and 2 employ simple diaromatic thioureas as anion receptors, and the fluorophore is a naphthalimide moiety that absorbs in the visible part of the spectrum and emits in the green. Upon recognition of anions such as F⁻ and AcO⁻ in DMSO, the fluorescence emission of 1 and 2 was ‘switched off’, with no significant changes in the UV-vis spectra. This recognition shows a 1:1 binding between the receptor and the anions. In the case of F⁻, further additions of the anion, gave rise to large changes in the UV-vis spectra, where the λ_max at 455 nm was shifted to 550 nm. These changes are thought to be due to the deprotonation of the 4-amino moiety of the naphthalimide fluorophore. This was in fact found to be the case, using simple naphthalimide derivatives such as 6. Sensors 1 and 2 can thus display dual sensing action; where at low concentrations, the fluorescence emission is quenched, and at higher concentrations the absorption spectra are modulated.     

Synthesis of the anionic fluororeceptors based on thiourea and amide groups and recognition property for α,ω-dicarboxylate

Three new neutral receptors (1, 2 and 3) containing thiourea and amide groups were synthesized by simple steps in good yields. The binding properties for anions of 1, 2 and 3 were examined by UV-vis, fluorescence, and ¹H NMR spectroscopy. Receptors 1, 2 and 3 all had a better adipate anion selectivity by comparison with other dicarboxylate anions. The association constants of 1, 2 and 3 with adipate were higher as compared to other anions (malonate, succinate, glutarate). In particular, a distinct color change was observed from light yellow to orange-red upon addition of adipate to the solution of 1 in DMSO. The UV-vis and fluorescence data indicate that a 1:1 stoichiometry complex is formed between compound 1, 2 or 3 and dicarboxylate anions through hydrogen bonding interactions.     

Anion recognition through hydrogen bonding by adamantane-dipyrromethane receptors

Adamantane-dipyrromethane (AdD) receptors [di(pyrrole-2-yl)methyladamantane (1), 2,2-di(pyrrole-2-yl)adamantane (2), 1,3-bis[di(pyrrole-2-yl)methyl]adamantane (3), 2,2,6,6-tetra(pyrrole-2-yl)adamantane (4)] form complexes with F⁻, Cl⁻, Br⁻, AcO⁻, NO₃⁻, HSO₄⁻, and H₂PO₄⁻. The association constants of the complexes were determined by ¹H NMR titrations, whereas the geometries of complexes 1·F⁻ (2:1), 2·F⁻ (2:1), 2·Cl⁻ (2:1), 2·AcO⁻ (2:1), and 4·F⁻ (1:1) were determined by X-ray structural analysis. The most stable complexes are of 2:1 stoichiometry with F⁻ and AcO⁻. The stability constants are in accordance with the anion basicity and the ability of AdD receptors to place the hydrogen bonding donor groups in a tetrahedral fashion around anions. The binding energies of the complexes between receptors 1-4 and F⁻ anion are calculated using quantum chemical methods. The calculated results show that the solvent polarity is important for the complexation of fluoride ion with AdD receptors 1-4.     

Cationic olefin Pd(II) complexes bearing α-iminoketone N,O-ligands: synthesis, intramolecular and interionic characterization and reactivity with olefins and alkynes

Complexes [Pd(η¹, η²-5-OMe-C₈H₁₂)(N,O)]BF₄ (N,O=2,6-(i-Pr)₂(C₆H₃)NC(Ph)-C(Ph)O, 1; 2,6-(i-Pr)₂(C₆H₃)NC(Me)-C(Ph)O, 2; 2-benzoylpyridine, 3) were synthesized by the reactions of [Pd(η¹,η²-5-OMe-C₈H₁₂)Cl]₂ with the suitable N,O-ligand. They were tested as catalysts for olefin or alkyne polymerizations. During such reactions 1-3 quantitatively transformed into their η¹,η²-1-OMe-C₈H₁₂ isomers (1a-3a). The same isomerization occurred in methylene chloride, even in the absence of olefins or alkynes, with a much slower rate. All complexes were fully characterized in solution by multinuclear and multidimensional low temperature NMR spectroscopy. The solid state structures of complexes 1 and 1a were investigated by X-ray single crystal studies. ¹⁹F, ¹H-HOESY NMR experiments carried out in methylene chloride-d₂ at 217 K indicated that the anion prefers to locate on the side of N,O-ligand shifted toward the O-arm in 1-1a and 2-2a while it approaches the N-arm in 3 and 3a compounds.     

Regiochemistry of an ambident cyclic ketene-N,O-acetal nucleophile and its anion toward electrophiles

The five-membered cyclic ketene-N,O-acetal, 2-oxazolidin-2-ylidene-1-phenylethanone 1, and its anion 2, formed on deprotonation, are ambident nucleophiles. Compound 1 was synthesized by benzoylation of 2-methyl-2-oxazoline to give a ring-opened N,C,O-trisbenzoylation product, 9, followed by N,O-double debenzoylation using methanolic KOH. Compound 1 reacted with benzoyl chloride to give N,C,O-trisbenzoylated 9, and reacted with phenyl chloroformate to give the similar ring-opened carbonic acid 3-[(2-chloro-ethyl)-phenoxycarbonyl-amino]-3-oxo-1-phenyl-propenyl ester phenyl ester, 13. In contrast, ambident anion 2 reacted with benzoyl chloride to give the β,β-bisbenzoylated cyclic ketene-N,O-acetal, 16, and reacted with phenyl chloroformate to give the novel heterocycle 3-(2-hydroxy-ethyl)-6-phenyl-[1,3]oxazine-2,4-dione, 17.     

[4+2] Cycloaddition of 1-aminodienes and 2-substituted vinylphosphonates: application to asymmetric synthesis of 3-amino-5-phosphono-1-cyclohexene derivatives

N-Butadienylsuccinimide (1), iso-propyl N-butadienyl-(S)-pyroglutamate (5) and N-butadienyl-(R)-4-phenyloxazolidin-2-one (6) reacted with vinylphosphonates, vicinally-substituted (2) by electronwithdrawing groups (CO₂Me, CN, COMe), to furnish [4+2] cycloadducts (3-4,7-10, and 11-14) in moderate to good yields (40-88%). The reactions were highly selective: regioselectivity of 95-100%, endoselectivity of 75-92% and facial selectivity of 80-95%. The major diastereoisomers were fully characterized by ¹H and ¹³C NMR spectroscopy.     

Chiral organotin (IV) carboxylates complexes: Syntheses, characterization, and crystal structures with chiral (S)-(+)-6-methoxy-α-methyl-2-naphthaleneaceto acid ligand

Eight new organotin (IV) carboxylates, (R₃Sn)₄(nap)₄ (R = Me 1, n-Bu 2), [(R₃Sn) (nap)]_n (R = Ph 3, PhCH₂4), (R₂Sn) (nap)₂ (R = n-Bu 5, Ph 6, PhCH₂7) and {[R₂Sn(nap)]₂O}₂ (R = Me 8) (nap = (S)-(+)-6-methoxy-α-methyl-2-naphthaleneaceto anion) have been synthesized. All of the complexes have been characterized by elemental analysis, FT-IR, NMR (¹H, ¹³C and ¹¹⁹Sn) spectra. Among these complexes, complexes 1, 3, 5 and 8 were also characterized by X-ray crystallography diffraction analysis, and the data of X-ray crystallography diffraction indicated that complexes 1, 3 and 5 are new chiral organotin (IV) carboxylates complexes. The structural analyses show that complex 1 has a tetranuclear Sn₄O₈ macrocycle structure, complex 3 has a 1D spring-like chiral helical chain with a columnar channel, complex 5 possesses a dimer structure, and complex 8 has a supramolecular chainlike ladder structure through weak intermolecular non-covalent O^…O interactions.     

Ag and Zn complexes with possible application as NLO materials - Crystal structures and properties

Four novel Ag^I-complexes with DL-mandelic acid (MA) (1), squaric acid (H₂Sq) (2), 3-pyridin aldehyde (3PyA) (3) and 2-amino-8-hydroxyquinoline (2A8H) (4) as well as two Zn^II-ones with 3PyA (5) and 2A8H (6) are synthesized, isolated, spectroscopic and structural characterized by single crystal X-ray diffraction, UV-vis-NIR, and IR-spectroscopy. The experimental data of the complex (1) were compared with the analogous of the neutral MA. Quantum chemical calculations are carried out, and the electronic structures and optical properties of neutral MA and its anion, with a view to assign the vibrational properties of (1).