Butylamide-terminated poly(amidoamine) dendritic gelators

Butylamide-terminated poly(amidoamine) dendrons with either a Boc group (C-n (n = 1, 2, 3)) or a carboxyl group (E-n (n = 1, 2)) at the focal point, as a new kind of dendritic gelators, were synthesized and their gelation properties were studied by TEM, WAXD, SAXS, NMR,and FTIR spectroscopy. It was found that the structure of focal groups impacted greatly on their gelation ability and the dendrons with higher generations facilitated the gel phase assembly. Hydrogen-bonding and hydrophobic interactions were proved to be the main driving forces responsible for the fibrous assembly with the diameter in the range of 30-100 nm. The molecular packing pattern of the xerogels of C-2, C-3, E-1, and E-2 all showed a lamellar structure, which was revealed by WAXD and SAXS.     

New 3d–4f supramolecular systems constructed by [Fe(bipy)(CN)4] and partially blocked lanthanide cations

The reaction of acetonitrile (1–5) and mixed acetonitrile/water 1:1 (6–9) solutions containing the cyanide-bearing [Fe(bipy)(CN)₄]⁻ building block (bipy = 2,2′-bipyridine) and the partially blocked [Ln(bpym)]³⁺ cation (Ln = lanthanide trivalent cation and bpym = 2,2′-bipyrimidine) has afforded two new families of 3d–4f supramolecular assemblies of formula [Ln(bpym)(NO₃)₂(H₂O)₃][Fe(bipy)(CN)₄] · H₂O · CH₃CN [Ln = Sm (1), Gd (2), Tb (3), Dy (4) and Ho (5)] and [Ln(bpym)(NO₃)₂(H₂O)₄][Fe(bipy)(CN)₄] [Ln = Pr (6), Nd (7), Sm (8), Gd (9)]. They crystallize in the P2₁/c (1–5) and P2/c (6–9) space groups and their structures are made up of [Fe(bipy)(CN)₄]⁻ anions (1–9) and [Ln(bpym)(NO₃)₂(H₂O)_n]⁺ cations [n = 3 (1–5) and 4 (6–9)] with uncoordinated water and acetonitrile molecules (1–5) which are interlinked through an extensive network of hydrogen bonds and π–π stacking into three-dimensional motifs. Both families have in common the occurrence of the low-spin iron(III) unit [Fe(bipy)(CN)₄]⁻ where two bipy–nitrogen and four cyanide–carbon atoms build a somewhat distorted octahedral surrounding around the iron atom [Fe–N = 1.980(3)–1.988(3) Å (1–5) and 1.988(2)–1.992(2) Å (6–9); Fe–C = 1.904(5)–1.952(4) Å (1–5) and 1.911(2)–1.948(3) Å (6–9)]. The main structural difference between both families concerns the environment of the lanthanide atom which is nine- (1–5)/10-coordinated (6–9) with a chelating bpym, two bidentate nitrate and three (1–5)/four (6–9) water molecules building distorted monocapped (1–5)/bicapped (6–9) square antiprisms. This different lanthanide environment is at the origin of the different hydrogen bonding pattern of the two families of compounds.     

Dimolybdenum complexes containing anions of N,N′-bis(pyrimidine-2-yl)formamidine and N-(2-pyrimidinyl)formamide

The reactions of Mo₂(O₂CCH₃)₄ with different equivalents of N,N′-bis(pyrimidine-2-yl)formamidine (HL1) and N-(2-pyrimidinyl)formamide (HL2) afforded dimolybdenum complexes of the types Mo₂(O₂CCH₃)(L1)₂(L2) (1) trans-Mo₂(L1)₂(L2)₂ (2) cis-Mo₂(L1)₂(L2)₂ (3) and Mo₂(L2)₄ (4). Their UV–Vis and NMR spectra have been recorded and their structures determined by X-ray crystallography. Complexes 2 and 3 establish the first pair of trans and cis forms of dimolybdenum complexes containing formamidinate ligands. The L1 ligands in 1–3 are bridged to the metal centers through two central amine nitrogen atoms, while the L2 ligands in 1–4 are bridged to the metal centers via one pyrimidyl nitrogen atom and the amine nitrogen atom. The Mo–Mo distances of complexes 1 [2.0951(17) Å], 2 [2.103(1) Å] and 3 [2.1017(3) Å], which contain both Mo?N and Mo?O axial interactions, are slightly longer than those of complex 4 [2.0826(12)–2.0866(10) Å] which has only Mo?O interactions.     

Hydrothermal syntheses and structures of the uranyl tellurates AgUO2(HTeO5) and Pb2UO2(TeO6)

Two uranyl tellurates, AgUO₂(HTeO₅) (1) and Pb₂UO₂(TeO₆) (2), were synthesized under hydrothermal conditions and were structurally, chemically, and spectroscopically characterized. 1 crystallizes in space group Pbca, a=7.085(2) Å, b=11.986(3) Å, c=13.913(4) Å, V=1181.5(5) Å³, Z=8; 2 is in P2(1)/c, a=5.742(1) Å, b=7.789(2) Å, c=7.928(2) Å, V=90.703(2) Å³, and Z=2. These are the first structures reported for uranyl compounds containing tellurate. The U⁶⁺ cations are present as (UO₂)²⁺ uranyl ions that are coordinated by O atoms to give pentagonal and square bipyramids in compounds 1 and 2, respectively. The structural unit in 1 is a sheet consisting of chains of edge-sharing uranyl pentagonal bipyramids that are one bipyramid wide, linked through the dimers of TeO₆ octahedra. In 2, uranyl square bipyramids share each of their equatorial vertices with different TeO₆ octahedra, giving a sheet with the autunite-type topology. Sheets in 1 and 2 are connected through the low-valence cations that are located in the interlayer region. The structures of 1 and 2 are compared to those of uranyl compounds containing octahedrally coordinated cations.     

Reactivity of cyclopalladated compounds derived from biphenyl-2-ylamine towards carbon monoxide, butyl isocyanide and alkynes

The reactivity of the dimeric cyclopalladated compounds derived from biphenyl-2-ylamine (μ-X)₂[κ²-N2′,C1-1-Pd-2-{(2′-NH₂C₆H₄)C₆H₄}]₂ [X = OAc (1), X = Cl (2)] towards unsaturated organic molecules is reported. Compound 1 reacted with carbon monoxide and ^tbutyl isocyanide producing phenanthridin-6(5H)-one and N-tert-butylphenanthridin-6-amine in 63% and 88% yield, respectively. Compound 2 reacted separately with diphenylacetylene and 3-hexyne, affording the mononuclear organopalladium compounds [κ²-N2″,C1-η²-C2,C3- 1-Pd{(R-CC-R)₂-2′-(2″-NH₂C₆H₄)C₆H₄}Cl] [R = Ph (5), R = Et (6)] in 50-60% yield, which derived from the insertion of two alkyne molecules into the C-Pd σ bonds of 2. The crystal structure of compounds 5 and 6 has been determined. Compound 5 crystallized in the monoclinic space group P2₁/n with a = 13.3290(10) Å, b = 10.6610(10) Å and c = 22.3930(10) Å and β = 100.2690(10)°. Compound 6 crystallized in the triclinic space group with a = 7.271(7) Å, b = 10.038(3) Å and c = 16.012(5) Å, and α = 106.79(3)°, β = 96.25(4)° and γ = 99.62(4)°. The crystal structures of 5 and 6 have short intermolecular Pd-Cl?H-N-Pd non-conventional hydrogen bonds, which associated the molecules in chains in the first case and in dimers in the second.     

Platinum(II) complexes with bidentate iminopyridine ligands: Synthesis,spectral characterization,properties and structural analysis

Four platinum(II) complexes, [PtCl₂L] (L = (4-fluorophenyl)pyridin-2-ylmethylene-amine, 1; (4-chlorophenyl)pyridin-2-ylmethyleneamine, 2; (4-bromophenyl)pyridin-2-ylmethyleneamine, 3 and (4-iodophenyl)pyridin-2-ylmethyleneamine, 4) have been synthesized and characterized by CHN analysis, IR and UV–Vis spectroscopy. The crystal structures of 1 and 2 were determined using single crystal X-ray diffraction. The coordination polyhedron about the platinum (II) center in the complexes is best described as distorted square planar. The complexes undergo stacking to form a zigzag Pt···Pt···Pt chain containing both short (3.57(7) Å in 1 and 3.62(8) Å in 2) and long (5.16(7) Å in 1 and 5.41(9) Å in 2) Pt···Pt separations through the crystal. The compounds absorb moderately in the visible region, owing to a charge-transfer-to-diimine electronic transition. The redox potentials are approximately insensitive to the substituents on the phenyl ring of the ligands.     

Synthesis, characterization and molecular structure of the [(η-C6Me6)Ru(μ-N3)(N3)]2 complex and its reactions with some monodentate ligands

The reaction of complex [(η⁶-C₆Me₆)Ru(μ-Cl)Cl]₂ (1) with sodium azide yielded complexes of the composition [(η⁶-C₆Me₆)Ru(μ-N₃)(N₃)]₂ (2) and [(η⁶-C₆Me₆)Ru(μ-N₃)(Cl)]₂ (3), depending upon the reaction conditions. Complex 3 with excess of sodium azide in ethanol yielded complex 2. Complexes 2 and 3 undergo substitution reactions with monodentate ligands such as PPh₃, PMe₂Ph and AsPh₃ to yield monomeric complexes. The structure of complex 2 was determined by X-ray crystallography. All these complexes were characterized by micro analytical data and by FT-IR and FT-NMR spectroscopy. Complex 2 crystallizes in the monoclinic space group P2₁/n with a = 8.5370(11) Å, b = 16.192(2) Å, c = 10.4535(13) Å and β = 110.877(2)°.     

Structural and thermal study of asymmetric α-dioxime complexes of Co(III) with Cl and methyl-pyridines

Two new cobalt(III)-chelates, trans-bis(methyl-ethyl-dioximato)-chloro-β-picoline-cobalt (III) (1), and trans-bis(methyl-ethyl-dioximato)-chloro-3,4-lutidine-cobalt (III) (2) were obtained by oxidizing a mixture of CoCl₂, methyl-ethyl-dioxime and amines: β-picoline (3-methyl-pyridine) for (1) and 3,4-lutidine (3,4-dimethyl-pyridine) for (2). The crystal structure of (1) was determined by single crystal XRD (monoclinic, space group P2₁/c (No. 14) with a = 8.391(3) Å, b = 14.421(5) Å, c = 18.383(8) Å, β = 114.57(2)°, R = 0.0499), while both (1) and (2) were studied by middle and far FTIR spectroscopy, electrospray ionization (ESI) MS, powder XRD and thermal analysis (TG/DTA-MS). Melting of the related complexes 1 and 2 at 219 and 184 °C, respectively, results in an immediate chemical degradation of their whole structure and tarring of ligands.     

Coordination modes of 3-hydroxypicolinic acid: Synthesis and structural characterization of polymeric mercury(II) complexes

Novel mercury(II) compounds of 3-hydroxypicolinic acid (HpicOH; IUPAC name: 3-hydroxy-2-pyridinecarboxylic acid) were synthesized and characterized. HgCl(picOH) (1) and HgBr₂(HpicOH) (2) were obtained as reaction products from the reaction of the corresponding mercury(II) halide with HpicOH, irrespective of the molar ratio of the reactants. From the reaction of HpicOH and mercury(II) acetate, Hg(picOH)₂ (3) was obtained, while mercury(II) nitrate monohydrate gave the 1/1 solvate with water Hg(picOH)₂ · H₂O (3a). Infrared, ¹H and ¹³C NMR spectroscopic data were analyzed for complexes 1, 2 and 3. X-ray crystal structure analysis of 1 and 2 revealed their polymeric nature and different coordination modes of HpicOH. In 1 the deprotonated picolinic acid is N,O-chelating and bridging, while in 2 HpicOH is a O-monodentate weakly bound ligand. Compound 1 consists of HgCl(picOH) moieties with two linear covalent bonds, Hg–N 2.143(4) and Hg–Cl 2.298(1) Å, and four additional Hg?O contacts (2.460(3)–2.904(3) Å) in which both oxygen atoms from the carboxylic group are bridging and involved in coordination to three neighboring mercury atoms, thus forming infinite layers. The coordination of mercury is 2 + 4. 2 consists of {HgBr₂(HpicOH)} moieties, which are linked into chains by means of mercury to bromine secondary long range interactions. The coordination sphere of mercury can be described as irregular 2 + 3 formed by two covalently bonded bromine atoms (Hg–Br 2.277(1) and 2.366(1) Å), two bridging bromine atoms (Hg?Br 3.309(1) and 3.247(1) Å) and by the HpicOH ligand attached to mercury in the zwitterionic form via the carboxylic oxygen atom (Hg?O 2.602(7) Å).     

Aqueous syntheses of [(Cp-R)M(CO)3] type complexes (Cp = cyclopentadienyl, M = Mn, Tc, Re) with bioactive functionalities

We describe reactions of [^99mTc(H₂O)₃(CO)₃)]⁺ (1) with Diels-Alder products of cyclopentadiene such as “Thiele’s acid” (HCp-COOH)₂ (2) and derivatives thereof in which the corresponding [(Cp-COOH)^99mTc(CO)₃)] (3) complex did form in water. We propose a metal mediated Diels-Alder reaction mechanism. To show that this reaction was not limited to carboxylate groups, we synthesized conjugates of 2 (HCp-CONHR)₂ (4a-c) (4a, R = benzyl amine; 4b, R = N_α-Boc-l-2,3-diaminopropionic acid and 4c, R = glycine). The corresponding ^99mTc complexes [(4a)^99mTc(CO)₃)] 6a, [(4b)^99mTc(CO)₃)] 6b and [(4c)^99mTc(CO)₃)] 6c have been prepared along the same route as for Thiele’s acid in aqueous media demonstrating the general applicability of this synthetic strategy. The authenticity of the ^99mTc complexes on the no carrier added level have been confirmed by chromatographic comparison with the structurally characterized manganese or rhenium complexes.Studies of the reaction of 1 with Thiele’s acid bound to a solid phase resin demonstrated the formation of [(Cp-COOH)^99mTc(CO)₃)] 3 in a heterogeneous reaction. This is the first evidence for the formation of no carrier added ^99mTc radiopharmaceuticals containing cyclopentadienyl ligands via solid phase syntheses. Macroscopically, the manganese analogue 5a and the rhenium complexes 5b-c have been prepared and characterized by IR, NMR, ESI-MS and X-ray crystallography for 5a (monoclinic, P2₁/c, a = 9.8696(2) Å, b = 25.8533(4) Å, c = 11.8414(2) Å, β = 98.7322(17)°) in order to unambiguously assign the authenticity of the corresponding ^99mTc complexes.     

Pyridine-2-thione (pySH) derivatives of silver(I): Synthesis and crystal structures of dinuclear [Ag2Cl2(μ-S-pySH)2(PPh3)2] and [Ag2Br2(μ-S-pySH)2(PPh3)2] complexes

Reaction of silver(I) halides with PPh₃ in acetonitrile and then with pyridine-2-thione (pySH) chloroform (1:1:1 molar ratio) has yielded sulfur bridged dimers of general formula, [Ag₂X₂(μ-S-pySH)₂(PPh₃)₂] (X = Cl, 1, Br, 2). Both these complexes have been characterized using analytical data, NMR spectroscopy and single crystal X-crystallography. The central Ag₂S₂ cores form parallelograms with unequal Ag–S bond distances (2.5832(8), 2.7208(11) Å) in 1 and (2.6306(4), 2.6950(7) Å) in 2, respectively. The Ag?Ag contacts of compounds 1 and 2 are 3.8425(8) and 3.8211(4) Å, respectively. The angles around Ag (in the range 87.19(2)–121.71(2)° in 1 and 87.81(2)–121.53(2)° in 2) reveal highly distorted tetrahedral geometry. There are inter dimer π–π stacking interactions between pyridyl rings (inter ring distances of 3.498 and 3.510 Å in complexes 1 and 2, respectively). The solution state ³¹P NMR spectroscopy has shown the existence of both monomers and dimers. The studies reveal relatively weaker intramolecular –NH?Cl hydrogen bonding in case of AgCl vis-à-vis that in CuCl which favored both a monomer and a dimer with AgCl, and only a monomer with CuCl.     

Redistribution reactions of heteroleptic barium iodide derivatives: Synthesis and structures of trans-BaI2(DME)(triglyme), cis-BaI2(DME)(tetraglyme) and [Ba(tetraglyme)2]I2 · C7H8

The reaction between BaI₂ · 2H₂O and NaHFIP [HFIP = OCH(CF₃)₂] in a 1:1 stoichiometry gave the heterometallic compound NaBaI₂(HFIP)(H₂O)(THF)_0.5 (1). Attempts to recrystallize 1 in the presence of N- or O-donor ligands lead to redistribution reactions. Barium iodide adducts such as BaI₂(DME)₃ (2), trans-BaI₂(DME)(triglyme) (3) and cis-BaI₂(DME)(tetraglyme) (4) were isolated with DME as solvent. A similar behavior was observed for the reaction between BaI₂ · 2H₂O and NaTFA (TFA = O₂CCF₃) in a 1:1 stoichiometry in THF, and [Ba(tetraglyme)₂]I₂ · C₇H₈ (6) was isolated in the presence of excess tetraglyme. All compounds have been characterized by elemental analysis, IR and ¹H NMR as well as single crystal X-ray studies for 3, 4 and 6. Compounds 3 and 4 are covalent adducts with eight- and nine-coordinate barium, respectively. Compound 6 is an ionic compound where two tetraglyme ligands wrap the 10-coordinate barium cation in a helical fashion. The presence of DME actually allows the coordination number of barium in the mixed-ligand adducts 3 and 4 to be tuned. The average Ba–O bond lengths (2.80 for 3 to 2.87 Å for 6) reflect the coordination number of the metal. The same observation is valid for the average Ba–I bond distance, 3.442 for 3 vs. 3.536 Å for 4.     

Crystal and solution structures of di-n-butyltin(IV) complexes of 5-[(E)-2-(4-methoxyphenyl)-1-diazenyl]quinolin-8-ol and benzoic acid derivatives: En route to elegant self-assembly via modulation of the tin coordination geometry

Reactions of ⁿBu₂SnCl(L¹) (1), where L¹ = acid residue of 5-[(E)-2-(4-methoxyphenyl)-1-diazenyl]quinolin-8-ol, with various substituted benzoic acids in refluxing toluene, in the presence of triethylamine, yielded dimeric mixed ligand di-n-butyltin(IV) complexes of composition [ⁿBu₂Sn(L¹)(L^2-6)]₂ where L² = benzene carboxylate (2), L³ = 2-[(E)-2-(2-hydroxy-5-methylphenyl)-1-diazenyl]benzoate (3), L⁴ = 5-[(E)-2-(4-methylphenyl)-1-diazenyl]-2-hydroxybenzoate (4), L⁵ = 2-{(E)-4-hydroxy-3-[(E)-4-chlorophenyliminomethyl]-phenyldiazenyl}benzoate (5) and L⁶ = 2-[(E)-(3-formyl-4-hydroxyphenyl)-diazenyl]benzoate (6). All complexes (1-6) have been characterized by elemental analyses, IR, ¹H, ¹³C and ¹¹⁷Sn NMR and ¹¹⁹Sn Mössbauer spectroscopy and their structures were determined by X-ray crystallography, complemented by ¹¹⁷Sn CP-MAS NMR spectroscopy studies in the solid state. The crystal structure of 1 reveals a distorted trigonal bipyramidal coordination geometry around the Sn-atom where the Cl- and N-atoms of ligand L¹ occupy the axial positions. In complexes 2-5, the molecules are centrosymmetric dimers in which the Sn-atoms are connected by asymmetric μ-O bridges through the quinoline O-atom to give an Sn₂O₂ core. The differences in the Sn-O bond lengths within the bridge range from 0.28 to 0.48 Å, with the longer of the Sn-O distances being in the range 2.56-2.68 Å and the most symmetrical bridge being in 5. The carboxylate group is almost symmetrically bidentate coordinated to the tin atom in 5 (Sn-O distances of 2.327(2) and 2.441(2) Å), unlike the other complexes in which the distance of the carboxylate carbonyl O-atom from the tin atom is in the range 2.92-3.03 Å. The structure of 5 displays a more regular pentagonal bipyramidal coordination geometry about each tin atom than in 2-4. In contrast, the centrosymmetric dimeric structure of 6 involves asymmetric carboxylate bridges, resulting in a different Sn₂C₂O₄ motif. The Sn-O bond lengths in the bridge differ by about 0.6 Å, with the longer distance involving the carboxylate carbonyl O-atom (2.683(2) and 2.798(2) Å for two molecules in the asymmetric unit). The carboxylate carbonyl O-atom has a second, even longer intramolecular contact to the Sn-atom to which the carboxylate group is primarily coordinated, with these Sn?O distances being as high as 3.085(2) and 2.898(2) Å. If the secondary interactions are considered, all the di-n-butyltin(IV) complexes (2-6) display a distorted pentagonal bipyramidal arrangement about each tin atom in which the n-butyl groups occupy the axial positions.     

Building three-dimensional metal phosphites from the corner-shared four-membered rings chain

Three new compounds, a one-dimensional (1D) zinc phosphite, (C₄H₈N₂H₄)[Zn(HPO₃)₂] (I), two three-dimensional (3D) metal phosphites (C₄H₈N₂H₄)[Zn₃(HPO₃)₄] (II) and (C₄H₈N₂H₄)[Zn_(3−x)Co_x(HPO₃)₄(H₂O)₂] (x≈0.83) (III) have been synthesized under hydrothermal conditions templated by piperazine and characterized by single-crystal X-ray diffraction, XRD, IR, UV-vis spectra and SQUID magnetometer. Compound I displays 1D chain-like structure, containing corner-shared (cs) four-membered rings. Interestingly, the structures of II and III show 1D chains similar to those observed in I. It is noteworthy that III represents the first cobalt-substituted zinc-phosphite. Crystal data: I, monoclinic, C2/c, a=17.748(2) Å, b=7.428(9) Å, c=8.8071(11) Å, β=105.345(3)°, V=1091.9 Å³, Z=4. II, Monoclinic P2₁/c, a=9.9435(4) Å, b=10.1438(3) Å, c=17.8164(5) Å, β=95.665(2)°, V=1788.27 Å³, Z=4, and III, Monoclinic P2₁/c, a=7.2338(2) Å, b=15.0238(5) Å, c=9.2153(3) Å, β=107.741(2)°, V=953.88(5) Å³, Z=2.     

A group of new selenite-chlorides of strontium and d-metals (Co,Ni): Synthesis, thermal behavior and crystal chemistry

The new selenite-chlorides with composition Sr₃(SeO₃)₂Cl₂ (I) and Sr₂M(SeO₃)₂Cl₂ (M=Co, Ni (II and III)) were obtained. They crystallize in monoclinic system I: space group C2/m, a=13.203(2) Å, b=5.5355(8) Å, c=6.6170(10) Å, β=95.89(1)°, Z=2; II Space group P2₁/n, a=5.3400(10) Å, b =6.4279(6) Å, c=12.322(1) Å, β=92.44(1)°, Z=2; III: space group P2₁/n, a=5.3254(11) Å, b=6.4363(13) Å, c=12.197(2), β=92.53(3)°, Z=2. All three compounds are constructed in the same manner. Sr polyhedra form infinite layers, which are interconnected into a 3D framework by means of Sr polyhedra in the case of I or Co and Ni polyhedra in the case of II and III. Se atoms are situated inside the channels of the 3D framework. The topological analysis of ELF for I confirmed that the lone electron pairs of SeO₃ groups are located inside these channels.     

Nucleophilic substitution reactions at the Si-Cl bonds of the dichloro(methyl)silyl ligand in five- and six-coordinate complexes of ruthenium(II) and osmium(II)

Treatment of either RuHCl(CO)(PPh₃)₃ or MPhCl(CO)(PPh₃)₂ with HSiMeCl₂ produces the five-coordinate dichloro(methyl)silyl complexes, M(SiMeCl₂)Cl(CO)(PPh₃)₂ (1a, M = Ru; 1b, M = Os). 1a and 1b react readily with hydroxide ions and with ethanol to give M(SiMe[OH]₂)Cl(CO)(PPh₃)₂ (2a, M = Ru; 2b, M = Os) and M(SiMe[OEt]₂)Cl(CO)(PPh₃)₂ (3a, M = Ru; 3b, M = Os), respectively. 3b adds CO to form the six-coordinate complex, Os(SiMe[OEt]₂)Cl(CO)₂(PPh₃)₂ (4b) and crystal structure determinations of 3b and 4b reveal very different Os-Si distances in the five-coordinate complex (2.3196(11) Å) and in the six-coordinate complex (2.4901(8) Å). Reaction between 1a and 1b and 8-aminoquinoline results in displacement of a triphenylphosphine ligand and formation of the six-coordinate chelate complexes M(SiMeCl₂)Cl(CO)(PPh₃)(κ²(N,N)-NC₉H₆NH₂-8) (5a, M = Ru; 5b, M = Os), respectively. Crystal structure determination of 5a reveals that the amino function of the chelating 8-aminoquinoline ligand is located adjacent to the reactive Si-Cl bonds of the dichloro(methyl)silyl ligand but no reaction between these functions is observed. However, 5a and 5b react readily with ethanol to give ultimately M(SiMe[OEt]₂)Cl(CO)(PPh₃)(κ²(N,N-NC₉H₆NH₂-8) (6a, M = Ru; 6b, M = Os). In the case of ruthenium only, the intermediate ethanolysis product Ru(SiMeCl[OEt])Cl(CO)(PPh₃)(κ²(N,N-NC₉H₆NH₂-8) (6c) was also isolated. The crystal structure of 6c was determined. Reaction between 1b and excess 2-aminopyridine results in condensation between the Si-Cl bonds and the N-H bonds with formation of a novel tridentate “NSiN” ligand in the complex Os(κ³(Si,N,N)-SiMe[NH(2-C₅H₄N)]₂)Cl(CO)(PPh₃) (7b). Crystal structure determination of 7b shows that the “NSiN” ligand coordinates to osmium with a “facial” arrangement and with chloride trans to the silyl ligand.     

Synthesis, structure of [H3dien]·(MF6)·H2O (M=Cr, Fe) and Fe Mössbauer study of [H3dien]·(FeF6)·H2O

Single crystals of [H₃dien]·(FeF₆)·H₂O (I) and [H₃dien]·(CrF₆)·H₂O (II) are obtained by solvothermal synthesis under microwave heating. I is orthorhombic (Pna2₁) with a=11.530(2) Å, b=6.6446(8) Å, c=13.787(3) Å, V=1056.3(2) Å³ and Z=4. II is monoclinic (P2₁/c) with a=13.706(1) Å, b=6.7606(6) Å, c=11.3181(9) Å, β=99.38(1)°, V=1034.7(1) Å³ and Z=4. The structure determinations, performed from single crystal X-ray diffraction data, lead to the R₁/wR₂ reliability factors 0.028/0.066 for I and 0.035/0.102 for II. The structures of I and II are built up from isolated FeF₆ or CrF₆ octahedra, water molecules and triprotonated amines. In both structures, each octahedron is connected by hydrogen bonds to six organic cations and two water molecules. The iron-based compound is also characterized by ⁵⁷Fe Mössbauer spectrometry: the hyperfine structure confirms the presence of Fe³⁺ in octahedral coordination and reveals the existence of paramagnetic spin fluctuations.     

Diverse coordination of two ligands in ferromagnetic [Cu(μ-HCO2)2(3-pyOH)]n and [Cu2(μ-HCO2)2(μ-3-pyOH)2(3-pyOH)2(HCO2)2]n

Two novel polynuclear complexes with methanoate anions and 3-hydroxypyridine ligands [Cu(μ-HCO₂)₂(3-pyOH)]_n (1) and [Cu₂(μ-HCO₂)₂(μ-3-pyOH)₂(3-pyOH)₂(HCO₂)₂]_n (2), respectively, were synthesized and characterized. The central copper atom in 1 is surrounded by four methanoates and a 3-pyOH molecule, forming a square-pyramidal CuO₃NO chromophore. All the methanoates are bidentate and serve as bridges between the adjacent copper ions via syn-anti and anti–anti coordination. The basal square coordination axes are formed by O(syn), N(3-pyOH) (1.974(2), 2.016(2) Å) and O(anti), O(anti) (1.945(2), 1.960(2) Å), while the third O(anti) (2.247(2) Å) is on the top of the pyramid. A ferromagnetic transition with an exchange constant 2J/k_B = 9.2 cm⁻¹ is found for 1 below 20 K. This interaction probably takes place through two syn-anti methanoates extended in a chain through the 2D structure. On the other hand, two monoatomic Cu–O–Cu intra-dinuclear asymmetric (1.986(2), 2.415(2) Å) bridges of two methanoates in [Cu₂(HCO₂)₄(3-pyOH)₄] (2) are present. An elongated distorted octahedral coordination sphere around each copper(II) atom is completed by an additional monodentate terminal methanoate (1.975(2) Å), two N-coordinated 3-pyOH (2.005(2), 2.002(2) Å) and the third weakly O-coordinated 3-pyOH (2.732(2) Å). Although a shorter Cu?Cu distance is noticed in 2 than in 1 (4.690(1) Å 1, 3.442(1) Å 2), much weaker ferromagnetism is found in 2.     

Structural studies of two-coordinate complexes of tris(2-methoxylphenyl)phosphine and tris(4-methoxyphenyl)phosphine with gold(I) halides

A series of five gold(I) halide complexes with the two isomeric methoxy-substituted triarylphosphines, tris(2-methoxyphenyl)phosphine [P(oanis)₃], [AuP(oanis)₃X] [for X = Cl, (1); X = Br, (2) and X = I, (3)] and tris(4-methoxyphenyl)phosphine [P(panis)₃], [AuP(panis)₃X] [for X = Br (4) and X = I (5)] have been synthesized and characterized by single crystal X-ray diffraction and solution ³¹P{¹H} NMR spectroscopy. The structure determinations confirm the expected presence of linear two-coordination about the gold centres in all five complexes with bond distance and angle data typical of this type of compound [Au–P, 2.239(2)–2.259(3) Å; Au–Cl, 2.294(2) Å; Au–Br, 2.385(2)–2.402(2) Å; Au–I, 2.546(1)–2.554(1) Å; P–Au–X; 175.3(1)–180°]. All analogues except the iodo complex 5 crystallize with one complex molecule in the crystallographic asymmetric unit. The bromo and iodo complexes 2 and 3 constitute a trigonal isomorphous set while the bromo complex 4 is also isomorphous with the previously determined chloro complex [AuP(panis)₃Cl]. The 2-methoxy analogues are stabilized by significant methoxy-O?Au interactions.     

Synthesis and characterization of perhalophenyltin derivatives. Study of their reactivity toward phosphine gold(I) chlorides

The (perhalophenyl)tin derivatives [SnR₄] (1-3) and [SnR₃Cl] (4-6) (R = C₆F₅, C₆F₃Cl₂, C₆Cl₅) were prepared from SnCl₄ and LiR or [SnR₄] in the appropriate molar ratio, while the dinuclear complexes [SnR₃]₂ (7-9) were obtained by treatment of [SnR₃Cl] with potassium under toluene reflux. Complexes 2, 6·0.5toluene and 7 were structurally characterized, the latter displaying a Sn-Sn bond of 2.808(7) Å, which indicates a strong tin-tin bond with covalent character in solid state. The hexaaryldistannanes 7-9 undergo transmetallation reactions with gold(I) derivatives, such as [AuCl(PPh₃)] or [(AuCl)₂(μ-dppm)], affording the neutral species [AuR(PPh₃)] (10-12) or [(AuR)₂(μ-dppm)] (13-15) or the ionic product [Au₃Cl₂(μ-dppm)₂][Sn(C₆F₅)₃Cl₂] (16). The crystal structures of 14·CH₂Cl₂, 15 and 16·2CH₂Cl₂ were determined by X-ray diffraction, the latter showing a Au₃ nearly equilateral triangular core in the cation with gold-gold contacts of 3.128(7) and 3.227(12) Å. The main difference between the molecular structures of 14·CH₂Cl₂ and 15 (both of them displaying intramolecular gold-gold contacts of 3.142(6) and 3.160(4) Å, respectively) is the presence of an intermolecular Au?Au interaction of 3.2126(8) Å in the case of the C₆F₃Cl₂ complex that gives rise to a tetranuclear unit.