Dynamic analysis of a penny-shaped dielectric crack in a magnetoelectroelastic solid under impacts

The transient response of a magneto-electro-elastic material with a penny-shaped dielectric crack subjected to in-plane magneto-electro-mechanical impacts is made. To simulate an opening crack with a dielectric interior, the crack-face electromagnetic boundary conditions are supposed to depend on the crack opening displacement and the jumps of electric and magnetic potentials across the crack. Four ideal crack-face electromagnetic boundary conditions involving a combination of electrically permeable or impermeable and magnetically permeable or impermeable assumptions can be reduced. The Laplace and Hankel transform techniques are further utilized to solve the mixed initial-boundary-value problem. Three coupling Fredholm integral equations are obtained and solved by the composite Simpson's rule. Dynamic field intensity factors of stress, electric displacement, magnetic induction, crack opening displacement (COD), electric potential and magnetic potential are given in the Laplace transform domain. By means of a numerical inversion of the Laplace transform, numerical results are calculated to show the variations of the physical parameters of concern versus the normalized time in graphics. The effects of applied electric and magnetic loads on the dynamic intensity factors of stress and COD, and the dynamic energy release rate for a BaTiO₃-CoFe₂O₄ composite with a penny-shaped vacuum crack are discussed in detail.     

Transient response of a piezoelectric ceramic strip with an eccentric crack under electromechanical impacts

The transient response of a piezoelectric strip with an eccentric crack normal to the strip boundaries under applied electromechanical impacts is considered. By using the Laplace transform, the mixed initial-boundary-value problem is reduced to triple series equations, then to a singular integral equation of the first kind by introducing an auxiliary function. The Lobatto–Chebyshev collocation technique is adopted to solve numerically the resulting singular integral equation. Dynamic field intensity factors and energy release rate are obtained for both a permeable crack and an impermeable crack. The effects of the crack position and the material properties on the dynamic stress intensity factor are examined and numerical results are presented graphically.     

Crack growth of an interface crack between two dissimilar magneto-electro-elastic materials under anti-plane mechanical and in-plane electric magnetic impact

This paper examines the dynamic response of an interface crack between two dissimilar magneto-electro-elastic materials subjected to the mechanical and electric magnetic impacts. The magneto-electric impermeable boundary conditions are adopted. Laplace and Fourier transforms and dislocation density functions are employed to reduce the mixed boundary value problem to Cauchy singular integral equations in Laplace transform domain, which are solved numerically. Lots of numerical results are given graphically in time domain. The effects of electric impact loading and magnetic impact loading on dynamic energy density factors are discussed. Crack growth and propagation is predicted. The study of this problem is expected to have applications to the investigation of dynamic fracture properties of magneto-electro-elastic materials with cracks.     

Antiplane mechanical and inplane electric time-dependent load applied to two coplanar cracks in piezoelectric ceramic material

This work is concerned with the dynamic response of two coplanar cracks in a piezoelectric ceramic under antiplane mechanical and inplane electric time-dependent load. The cracks are assumed to act either as an insulator or as a conductor. Laplace and Fourier transforms are used to reduce the mixed boundary value problems to Cauchy-type singular integral equations in Laplace transform domain. A numerical Laplace inversion algorithm is used to determine the dynamic stress and electric displacement factors that depend on time and geometry. A normalized equivalent parameter describing the ratio of the equivalent magnitude of electric load to that of mechanical load is introduced in the numerical computation of the dynamic stress intensity factor (DSIF) which has a similar trend as that for the pure elastic material. The results show that the dynamic electric field will impede or enhance crack propagation in a piezoelectric ceramic material at different stages of the dynamic electromechanical load. Moreover, the electromechanical response is greatly affected by the ratio of the crack length to the ligament between the cracks. The stress and electric displacement intensity factor can be combined by the energy density factor or function to address the fracture of piezoelectric materials under the combined influence of electromechanical loading.     

Dynamic fracture analysis of an annular interfacial crack between dissimilar magnetoelectroelastic layers

Transient response of an annular interfacial crack between dissimilar magnetoelectroelastic layers under impacts is investigated. On the crack surface, magnetoelectrically impermeable boundary condition is adopted. Using Laplace and Hankel transform techniques, the mixed boundary value problem is reduced to a system of singular integral equations. The integral equations are further reduced to a system of algebraic equations with the aid of Jacobi polynomials. The dynamic field intensity factor and dynamic energy release rate are determined. Numerical results reveal the effects of electric or magnetic loadings and material parameters of composite on crack propagation and growth.     

Transient response of a cracked magnetoelectroelastic strip under anti-plane impact

The transient anti-plane problem of a magnetoelectroelastic strip containing a crack vertical to the boundary is considered. Singular integral equations for the impermeable crack are obtained by using Fourier and Laplace transforms. Numerical results show the effects of the relative loading parameters κ_D and κ_B, and the crack configuration on the dynamic fracture behavior. The results obtained indicate that for the impermeable crack, the electric and magnetic impacts have significant influences on the dynamic stress intensity factor and the dynamic energy density factor.     

Transient response of a piezoelectric ceramic with two coplanar cracks under electromechanical impact

The transient response of two coplanar cracks in a piezoelectric ceramic under antiplane mechanical and inplane electric impacting loads is investigated in the present paper. Laplace and Fourier transforms are used to reduce the mixed boundary value problems to Cauchy-type singular integral equations in Laplace transform domain, which are solved numerically. The dynamic stress and electric displacement factors are obtained as the functions of time and geometry parameters. The present study shows that the presence of the dynamic electric field will impede or enhance the propagation of the crack in piezoelectric ceramics at different stages of the dynamic electromechanical load. Moreover, the electromechanical response is greatly affected by the ratio of the space of the cracks and the crack length.     

Transient response of a magnetoelectroelastic solid with two collinear dielectric cracks under impacts

Dynamic analysis of two collinear electro-magnetically dielectric cracks in a piezoelectromagnetic material is made under in-plane magneto-electro-mechanical impacts. Generalized semi-permeable crack-face boundary conditions are proposed to simulate realistic opening cracks with dielectric. Ideal boundary conditions of a combination of electrically permeable or impermeable and magnetically permeable or impermeable assumptions are several limiting cases of the semi-permeable dielectric crack. Utilizing the Laplace and Fourier transforms, the mixed initial-boundary-value problem is reduced to solving singular integral equations with Cauchy kernel. Dynamic intensity factors of stress, electric displacement, magnetic induction and crack opening displacement (COD) near the inner and outer crack tips are determined in the Laplace transform domain. Numerical results for a special magnetoelectroelastic solid are calculated to show the influences of the dielectric permittivity and magnetic permeability inside the cracks on the crack-face electric displacement and magnetic induction. By means of a numerical inversion of the Laplace transform, the variations of the normalized intensity factors of stress and COD are discussed against applied magnetoelectric impact loadings and the geometry of the cracks for fully impermeable, vacuum, fully permeable cracks and shown in graphics.     

Transient response of an elastic conductor with a penny-shaped crack under electromagnetic force

The axisymmetric dynamic response of a penny-shaped crack in an elastic conductor under an impulsive electric current flow and a constant axial magnetic field is analyzed. The axial current flow is disturbed by the presence of the crack and the torsional shear stresses are caused by the interactions between the magnetic field and the disturbed current. Laplace and Hankel transforms are used to reduce the electromagnetoelastic problem to a Fredholm integral equation of the second kind in the Laplace transform plane. A numerical Laplace inversion routine is used to recover the time dependence of the solution. Numerical results on the dynamic stress intensity factor are obtained and are presented in a graphical form.     

Full field analysis of an anti-plane interface crack subjected to dynamic body forces

In this study, the transient full field response of an interface crack between two different media subjected to dynamic body force at one material is investigated. For time t < 0, the bimaterial medium is stress free and at rest. At t = 0, a concentrated anti-plane dynamic point loading is applied at the medium as shown in Fig. 1. The total wave field is due to the effect of this point loading and the scattering of the incident waves by the interface crack. An alternative methodology that is different from the conventional superposition method is used to construct the reflected, refracted and diffracted wave fields. A useful fundamental solution is proposed in this study and the full field solution is determined by superposition of the fundamental solution in the Laplace transform domain. The proposed fundamental problem is the problem of applying an exponentially distributed traction (in the Laplace transform domain) on the interfacial crack faces. The Cagniard–de Hoop method of Laplace inversion is used to obtain the transient solution in time domain. Exact transient closed form solutions for stresses and stress intensity factors are obtained. Numerical results for the time history of stresses and stress intensity factors during the transient process are discussed in detail.     

Elastodynamic analysis of a crack at an arbitrary angle to the graded interfacial zone in bonded half-planes under antiplane shear impact

A solution is provided for the elastodynamic problem of a crack at an arbitrary angle to the graded interfacial zone in bonded media under the action of antiplane shear impact. The interfacial zone is modeled by a nonhomogeneous interlayer with the spatially varying shear modulus and mass density in terms of power functions between the two dissimilar, homogeneous half-planes. Based on the use of Laplace and Fourier integral transforms and the coordinate transformations of basic field variables, formulation of the transient crack problem is reduced to solving a Cauchy-type singular integral equation in the Laplace transform domain. The crack-tip response in the physical domain is recovered via the inverse Laplace transform and the values of dynamic mode III stress intensity factors are obtained as a function of time. A comprehensive parametric study is then presented of the effects of crack obliquity on the overshoot behavior of the transient crack-tip response, by plotting the peak values of the dynamic stress intensity factors versus the crack orientation angle for various material and geometric combinations of the bonded system.     

Dynamic crack propagation in a magneto-electro-elastic solid subjected to mixed loads: Transient Mode-III problem

The transient response of a Mode-III crack propagating in a magneto-electro-elastic solid subjected to mixed loads is investigated through solving the corresponding boundary-initial-value problem in both the cracked solid region and the interior fluid region with treatment of electro-magnetically permeable and impermeable crack face conditions in a unified way. The closed-form results for the dynamic field intensity factors are used to evaluate the dynamic energy release rate through the crack-tip dynamic contour integral. The permeability of the interior fluid region relative to the cracked solid region significantly affects the magneto-electro-mechanical coupling coefficient in the Bleustein–Gulyaev wave function and, consequently, the horizontal shear surface wave speed, the dynamic field intensity factors and the dynamic energy release rate. It is revealed from dynamic fracture mechanics analysis that the dynamic energy release rate thus obtained has an odd dependence on the dynamic electric displacement intensity factor and the dynamic magnetic induction intensity factor. It is also found that the horizontal shear surface wave speed provides the limiting velocity for the propagation of a Mode-III crack in a magneto-electro-elastic solid when there is only applied traction loading.     

Dynamic interaction of multiple arbitrarily oriented planar cracks in a piezoelectric space: A semi-analytic solution

The problem of determining the electro-elastic fields around arbitrarily oriented planar cracks in an infinite piezoelectric space is considered. The cracks which are acted upon by a transient load are either electrically impermeable or permeable. A semi-analytic method based on the theory of exponential Fourier transformation is proposed for solving the problem in the Laplace transform domain. The Laplace transforms of the jumps in the displacements and electric potential across opposite crack faces are determined by solving a system of hypersingular integral equations. Once these displacement and electric potential jumps are obtained, the displacements and electric potential and other physical quantities of interest, such as the crack tip stress and electric displacement intensity factors, can be computed with the help of a suitable algorithm for inverting Laplace transforms. The stress and electric displacement intensity factors are computed for some specific cases of the problem.     

Magneto–thermo–electro–elastic transient response in a piezoelectric hollow cylinder subjected to complex loadings

The article presents an analytical solution for magneto–thermo–electro–elastic problems of a piezoelectric hollow cylinder placed in an axial magnetic field subjected to arbitrary thermal shock, mechanical load and transient electric excitation. Using an interpolation method solves the Volterra integral equation of the second kind caused by interaction among magnetic, thermal, electric and mechanical fields, the electric displacement is determined. Thus, the exact expressions for the transient responses of displacement, stresses, electric displacement, electric potential and perturbation of the magnetic field vector in the piezoelectric hollow cylinder are obtained by means of Hankel transforms, Laplace transforms, and inverse Laplace transforms. From sample numerical calculations, it is seen that the present method is suitable for a piezoelectric hollow cylinder subjected to arbitrary thermal shock, mechanical load and transient electric excitation, and the result carried out may be used as a reference to solve other transient coupled problems of magneto–thermo–electro–elasticity.     

Dynamic fracture analysis of a penny-shaped crack in a magnetoelectroelastic layer

This paper analyzes the dynamic magnetoelectroelastic behavior induced by a penny-shaped crack in a magnetoelectroelastic layer subjected to prescribed stress or prescribed displacement at the layer surfaces. Two kinds of crack surface conditions, i.e., magnetoelectrically impermeable and permeable cracks, are adopted. The Laplace and Hankel transform techniques are employed to reduce the problem to Fredholm integral equations. Field intensity factors are obtained and discussed. Numerical results of the crack opening displacement (COD) intensity factors are presented and the effects of magnetoelectromechanical loadings, crack surface conditions and crack configuration on crack propagation and growth are examined. The results indicate that among others, the fracture behaviors of magnetoelectroelastic materials are affected by the sizes and directions of the prescribed magnetic and/or electric fields, and the effects are strongly dependent on the elastic boundary conditions.     

Pre-kinking of a moving crack in a magnetoelectroelastic material under in-plane loading

A constant moving crack in a magnetoelectroelastic material under in-plane mechanical, electric and magnetic loading is studied for impermeable crack surface boundary conditions. Fourier transform is employed to reduce the mixed boundary value problem of the crack to dual integral equations, which are solved exactly. Steady-state asymptotic fields near the crack tip are obtained in closed form and the corresponding field intensity factors are expressed explicitly. The crack speed influences the singular field distribution around the crack tip and the effects of electric and magnetic loading on the crack tip fields are discussed. The crack kinking phenomena is investigated using the maximum hoop stress intensity factor criterion. The magnitude of the maximum hoop stress intensity factor tends to increase as the crack speed increases.     

Analysis of cracked magnetoelectroelastic composites under time-harmonic loading

This paper presents a numerical model for the analysis of cracked magnetoelectroelastic materials subjected to in-plane mechanical, electric and magnetic dynamic time-harmonic loading. A traction boundary integral equation formulation is applied to solve the problem in combination with recently obtained time-harmonic Green’s functions (Rojas-Diaz et al., 2008). The hypersingular boundary integral equations appearing in the formulation are first regularized via a simple change of variables that permits to isolate the singularities. Relevant fracture parameters, namely stress intensity factors, electric displacement intensity factor and magnetic induction intensity factor are directly evaluated as functions of the computed nodal opening displacements and the electric and magnetic potentials jumps across the crack faces. The method is checked by comparing numerical results against existing solutions for piezoelectric solids. Finally, numerical results for scattering of plane waves in a magnetoelectroelastic material by different crack configurations are presented for the first time. The obtained results are analyzed to evaluate the dependence of the fracture parameters on the coupled magnetoelectromechanical load, the crack geometry and the characteristics of the incident wave motion.     

Transient response of a cracked piezoelectric strip under arbitrary electro-mechanical impact

By using the well-developed integral transform methodology, the dynamic response of stress and electric displacement around a finite crack in an infinite piezoelectric strip are investigated under arbitrary dynamic anti-plane loads. The dynamic stress intensity factors and electric displacement are obtained analytically. It is shown that the dynamic crack-tip stress and electric field still have a square-root singularity. Numerical computations for the dynamic stress intensity factor show that the electric load has a significant influence on the dynamic response of stress field. The higher the ratio of the crack length to the width of the strip, the higher the peak value of the dynamic stress intensity factor is. On the other hand, the dynamic response of the electric field is determined solely by the applied electric load. The electric field will promote or retard the propagation of the crack depending on the time elapse since the application of the external electro-mechanical loads. The project supported by the National Natural Science Foundation of China and the Post-Doctor Science Foundation of China     

SCATTERING OF HARMONIC ANTI-PLANE SHEAR STRESS WAVES BY A CRACK IN FUNCTIONALLY GRADED PIEZOELECTRIC/PIEZOMAGNETIC MATERIALS

In this paper, the dynamic behavior of a permeable crack in functionally graded piezoelectric/piezomagnetic materials is investigated. To make the analysis tractable, it is assumed that the material properties vary exponentially with the coordinate parallel to the crack. By using the Fourier transform, the problem can be solved with the help of a pair of dual integral equations in which the unknown is the jump of displacements across the crack surfaces. These equations are solved to obtain the relations between the electric filed, the magnetic flux field and the dynamic stress field near the crack tips using the Schmidt method. Numerical examples are provided to show the effect of the functionally graded parameter and the circular frequency of the incident waves upon the stress, the electric displacement and the magnetic flux intensity factors of the crack.     

Dynamic fracture behavior of a cracked piezoelectric half space under anti-plane mechanical and in-plane electric impact

Summary  The dynamic response of a cracked piezoelectric half-space under anti-plane mechanical and in-plane electric impacting loads is investigated in the present paper. In the study, the crack is assumed parallel to the free surface of the half-space. Laplace and Fourier transforms are used to reduce the mixed boundary value problems to Cauchy-type singular integral equations in the Laplace transform domain, which are solved numerically. Then, a numerical Laplace inversion is performed and the dynamic stress and electric displacement factors are obtained as functions of time and geometry parameters. The dynamic energy release rate is derived for piezoelectric materials in terms of the electroelastic intensities and is displayed graphically. Received 5 January 2000; accepted for publication 28 June 2000