氰基桥联铁钴链状配合物的结构与磁性

利用三氰基构筑单元(Bu₄N)[Fe(PzTp)(CN)₃](PzTp=tetrakis(pyrazolyl)borate)和(E)-1-苯乙烯基-1H-咪唑(Bzi),合成了2例氰基桥联的铁钴链状配位聚合物。单晶X射线衍射表明,配合物[Fe(PzTp)(CN)₃]₂[Co(Bzi)₄]₂(ClO₄)₂·H₂O (1)为方波形单链结构,而配合物[Fe(PzTp)(CN)₃]₂[Co(Bzi)₂]·CH₃OH (2)则形成含有甲醇溶剂分子的双“之”字形双链结构。磁学研究显示,配合物1在360 K左右显示出热诱导的自旋转变,而配合物2在大约200 K显示出溶剂诱导的两步自旋转变。变温红外光谱证实了热诱导的金属间电荷转移行为。此外,光磁实验显示,当用808和532 nm的光交替照射时,1显示出可逆的光诱导电荷转...     

氰基桥联配合物的研究进展

本文鲁士蓝类、杂化型普鲁士蓝类及其他类型氰基桥联配合物的分类、结构及其磁性质,并重点介绍了氰基桥联单分子磁体的最新研究成果及发展趋势。     

联吡啶桥联聚倍半硅氧烷及其镍(Ⅱ)、铽(Ⅲ)配合物的合成与磁性能

合成了一种新型含联吡啶基桥联倍半硅氧烷前驱体,通过溶胶-凝胶工艺,在稀盐酸催化下,分别与镍盐(醋酸镍)或铽盐(氯化铽)反应,制备了联吡啶基桥联聚倍半硅氧烷及其金属配合物,并对聚合物及其配合物进行了结构表征.结果表明,金属离子与配体成功络合,扫描电镜照片显示,合成的聚合物和金属配合物为粒径均一、形状规则的球状粒子,磁性能...     

三维氰基桥联Cu(I)配位聚合物的模板合成和晶体结构

将(Et4N)3Mn(CN)6和Cu(en)2(ClO4)2反应得到了三维配位聚合物{[Cu(Ⅱ)(en)2*H2O][Cu(I)2(CN)4]}n(en＝乙二胺),用元素分析、ICP分析、IR光谱对配合物进行了表征.X-射线衍射结果表明晶体属单斜晶系,空间群为Cc(#9),晶胞参数a＝14.759(3),b＝7.734(2),c＝14.247(3)(A),β＝112.65(3)°,V＝1500.9(5)(A)3,Z＝4,Dc＝1.916Mg*m-3,F(000)＝868,最终偏离因子R1＝0.0267,wR2＝0.0633.该配合物结构中Cu(I)离子间通过氰基桥联形成三维峰窝样主体骨架结构,而Cu(Ⅱ)配离子[Cu(en)2*H2O]2+被包合在主体内架通道空腔的中央.该配合物的合成是利用[Cu(CN)2]-为建筑砖块,[Cu(en)2*H2O]2+为模板的自组装反应.     

氰根桥联三核异金属配合物的合成、晶体结构及磁性研究

采用[(Tp)Fe(CN)₃]-(Tp=hydrotris(pyrazolyl)borate)与Mn(Ac)₂·4H₂O反应，合成了氰根桥联的异金属三核配合物[Mn(phen)₂][(Tp)Fe(CN)₃]₂·5H₂O (1)(phen=1，10-phenanthroline)，并对其结构和磁性进行了研究。晶体结构分析结果表明该化合物晶体属于三斜晶系，P1空间群。在该配合物中，Mn(Ⅱ)与2个phen分子及2个[(Tp)Fe(CN)₃]^-配位，形成一种弯曲的三核结构。磁性测量结果表明，Mn(Ⅱ)和Fe(Ⅲ)之间通过氰根桥联产生弱的反铁磁相互作用。     

含樟脑衍生物氰基桥联双金属配合物的合成、结构及磁性质

采用樟脑衍生物为配体，分别合成了氰基桥联Cu(Ⅱ)-Fe(Ⅲ)-Cu(Ⅱ)三核配合物[{Cu(D,L-La)₂}₂Fe(CN)₆](ClO₄) (1)和Mn(Ⅲ)-Fe(Ⅲ)双核配合物[Mn(D,L-Lb)(DMF)(Tp)Fe(CN)₃]·(H₂O)₆ (2)。晶体结构分析表明，化合物1中Cu(Ⅱ)离子处于五配位的配位环境，分别和1个D-La，1个L-La及[Fe(CN)₆]^3-中的1个氰基配位，2个Cu(Ⅱ)离子通过[Fe(CN)₆]^3-桥联。通过分子间氢键作用，化合物1形成二维超分子网络结构。化合物2中，[(Tp)Fe(CN)₃]^-通过其中的1个氰基与[Mn(D，L-Lb)]⁺桥联，其中Mn(Ⅲ)离子为六配位，分别和四齿配体Lb的2个氧原子和2个氮原子、DMF的1个氧原子及[(Tp)Fe(CN)₃]^-中的氰基氮原子配位。磁性研究表明，在化合物1中，Cu(Ⅱ)离子与Fe(Ⅲ)离子之间表现出铁磁相互作用，用哈密顿函数H=-2J(S₁·S₂+S₂·S₃)对其χ_MT-T曲线进行拟合，得到1的朗日因子g为2.190，交换常数J为0.55 cm^-1。     

铁氰根桥联的一维链状大环配位聚合物的合成及结构

配位聚合物的合成、结构和性质研究近年来引起了人们极大的兴趣 ,已成为配位化学最活跃的研究领域之一 .由于 [Fe( CN) 6 ]3- 和 [Fe( CN) 6 ]4- 离子本身具有丰富的配位特性 ,可与金属离子及其配合物形成一维链状、二维网状和三维立体结构的配位聚合物 [1～ 5] ,铁氰根和亚铁氰根桥联的配位聚合物的研究成为其中的研究热点之一 .此外 ,铁氰根和亚铁氰根桥联的配位聚合物具有较高的铁磁相变温度[6～ 8] ,是一类具有较好应用前景的分子磁体 .但是 ,以金属大环配合物作为结构单元与 [Fe( CN) 6 ]3-和 [Fe( CN) 6 ]4-离子形成的配位聚合物…     

基于二氰根铬的一系列氰根桥联CrⅢ-CuⅡ-CrⅢ三核配合物的合成、结构与磁性

基于一系列二氰根铬与[Cu(cyclam)](ClO₄)₂反应合成了3个氰根桥联Cr^Ⅲ-Cu^Ⅱ-Cr^Ⅲ三核配合物[Cu(cyclam)][Cr(bpmb)(CN)₂]₂·4H₂O(1)(cyclam=1,4,8,11-四氮杂环十四,bpmb^2-=1,2-二(2-吡啶甲酰胺基)-4-甲基苯),[Cu(cyclam)][Cr(bpdmb)(CN)₂]₂(2)(bpdmb^2-=1,2-二(2-吡啶甲酰胺基)-4,5-二甲基苯)和[Cu(cyclam)][Cr(bpClb)(CN)₂]₂·4H₂O(3)(bpClb^2-=1,2-二(2-吡啶甲酰胺基)-4-氯苯)。单晶衍射结果表明:3个化合物是结构类似的中性三核配合物,均含有氰根桥联的Cr(Ⅲ)-CN-Cu(Ⅱ)-NC-Cr(Ⅲ)连接;磁性研究表明:氰根桥在Cr^Ⅲ和Cu^Ⅱ离子间传递弱的铁磁耦合作用,基于自旋哈密顿算符Ĥ=-2J_CrCuŜ_Cu(Ŝ_Cr1+Ŝ_Cr2)拟合得到它们的磁耦合常数分别是J_CrCu=1.53(2) cm^-1(1),0.45(1) cm^-1(2)和0.73(2) cm^-1(3)。     

基于二氰根铬的一系列氰根桥联CrⅢ-CuⅡ-CrⅢ三核配合物的合成、结构与磁性

基于一系列二氰根铬与[Cu(cyclam)](Cl O4)2反应合成了3个氰根桥联CrⅢ-CuⅡ-CrⅢ三核配合物[Cu(cyclam)][Cr(bpmb)(CN)2]2·4H2O(1)(cyclam=1,4,8,11-四氮杂环十四烷,bpmb2-=1,2-二(2-吡啶甲酰胺基)-4-甲基苯),[Cu(cyclam)][Cr(bpdmb)(CN)2]2(2)(bpdmb2-=1,2-二(2-吡啶甲酰胺基)-4,5-二甲基苯)和[Cu(cyclam)][Cr(bp Clb)(CN)2]2·4H2O(3)(bp Clb2-=1,2-二(2-吡啶甲酰胺基)-4-氯苯)。单晶衍射结果表明:3个化合物是结构类似的中性三核配合物,均含有氰根桥联的Cr(Ⅲ)-CN-Cu(Ⅱ)-NC-Cr(Ⅲ)连接;磁性研究表明:氰根桥在CrⅢ和CuⅡ离子间传递弱的铁磁耦合作用,基于自旋哈密顿算符H=-2JCr CuSCu(SCr1+SCr2)拟合得到它们的磁耦合常数分别是JCr Cu=1.53(2)cm-1(1),0.45(1)cm-1(2)和0.73(2)cm-1(3)。     

三维氰基桥联Cu（Ⅰ）配位聚合物的模板合成和晶体结构

将(Et4N)3Mn(CN)6和Cu(en)2(ClO4)2反应得到了三维配位聚合物{[Cu(Ⅱ)(en)2*H2O][Cu(I)2(CN)4]}n(en＝乙二胺),用元素分析、ICP分析、IR光谱对配合物进行了表征.X-射线衍射结果表明晶体属单斜晶系,空间群为Cc(#9),晶胞参数a＝14.759(3),b＝7.734(2),c＝14.247(3)(A),β＝112.65(3)°,V＝1500.9(5)(A)3,Z＝4,Dc＝1.916Mg*m-3,F(000)＝868,最终偏离因子R1＝0.0267,wR2＝0.0633.该配合物结构中Cu(I)离子间通过氰基桥联形成三维峰窝样主体骨架结构,而Cu(Ⅱ)配离子[Cu(en)2*H2O]2+被包合在主体内架通道空腔的中央.该配合物的合成是利用[Cu(CN)2]-为建筑砖块,[Cu(en)2*H2O]2+为模板的自组装反应.     

Pressure-Induced Conversion of a Paramagnetic FeCo Complex into a Molecular Magnetic Switch with Tuneable Hysteresis

A key challenge in the design of magnetic molecular switches is to obtain bistability at room temperature. Here, we show that application of moderate pressure makes it possible to convert a paramagnetic Fe^III₂Co^II₂ square complex into a molecular switch exhibiting a full dia- to paramagnetic transition: Fe^IICo^III ⇔ Fe^IIICo^II. Moreover, the complex follows a rare behavior: the higher the pressure, the broader the magnetic hysteresis. Thus, the application of an adequate pressure allows inducing a magnetic bistability at room temperature with predictable hysteresis width. The structural studies at different pressures suggest that the pressure-enhanced bistability is due to the strengthening of intermolecular interactions upon pressure increase. An original microscopic Ising-like model including pressure effects is developed to simulate this unprecedented behavior. Overall, this study shows that FeCo complexes could be very sensitive piezo switches with potential use as sensors.     

Synthesis and Crystal Structure of 〔EDA〕〔Ni(dmit)_2〕_3

１ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅＮｉ（ｄｍｉｔ）２ｍｏｌｅｃｕｌｅｓｇｉｖｅｒｉｓｅｔｏａｎｕｍｂｅｒｏｆｍｏｌｅｃｕｌａｒｃｏｎｄｕｃｔｏｒｓ〔１，２〕ｉｎａｄｄｉｔｉｏｎｔｏｓｕｐｅｒｃｏｎｄｕｃｔｏｒｓ〔３，４〕．Ｔｈｅｍｕｌｔｙｓｕｌｆｕｒｆ...     

Pressure‐Induced Conversion of a Paramagnetic FeCo Complex into a Molecular Magnetic Switch with Tuneable Hysteresis

A key challenge in the design of magnetic molecular switches is to obtain bistability at room temperature. Here, we show that application of moderate pressure makes it possible to convert a paramagnetic Fe^III₂Co^II₂ square complex into a molecular switch exhibiting a full dia‐ to paramagnetic transition: Fe^IICo^III ? Fe^IIICo^II. Moreover, the complex follows a rare behavior: the higher the pressure, the broader the magnetic hysteresis. Thus, the application of an adequate pressure allows inducing a magnetic bistability at room temperature with predictable hysteresis width. The structural studies at different pressures suggest that the pressure‐enhanced bistability is due to the strengthening of intermolecular interactions upon pressure increase. An original microscopic Ising‐like model including pressure effects is developed to simulate this unprecedented behavior. Overall, this study shows that FeCo complexes could be very sensitive piezo switches with potential use as sensors.     

一维链状铜配位聚合物[Cu(m-BDOA)(bipy)·H2O]n的合成与晶体结构

A novel coordination polymer, [Cu(m-BDOA)(bipy)·H₂O]_n (m-BDOA^2-=benzene-1,3-dioxyacetate), was synthesized and characterized by elemental analysis, IR spectra, X-ray single crystal structure analysis. Crystallographic data are as follows: orthorhombic, space group Pna2₁, a=1.606 9(3) nm, b=1.685 9(3) nm, c=0.699 7(1) nm, V=1.8955(7) nm³, Z=4, D_c=1.619 g·cm^-3, μ=1.200 mm^-1, F(000)=948，R=0.038 1, wR=0.038 6. The copper atom is five-coordinated involving two oxygen atoms of different m-BDOA^2- ligand, two nitrogen atoms of 2,2′-bipy ligand and one coordinated water, there is a distorted square pyramidal environment. Two copper atoms are bridged by m-BDOA^2- ligand, forming a one-dimensional chain along a axis. The adjacent distance of Cu…Cu atoms is 0.877 3nm. The crystal network was formed by the intermolecular hydrogen bond and π-packing interactions.     

配位聚合物[Zn(3-aba)2]n·nH2O和[Cd(3-aba)2]n的合成与晶体结构

用水热法合成了2个新的配位聚合物[Zn(3-aba)₂]_n·nH₂O (1)和[Cd(3-aba)₂]_n (2)(3-aba=间氨基苯甲酸阴离子)，对它们进行 了元素分析、热分析、红外光谱和X射线单晶衍射等表征。配位聚合物1晶体属正交晶系，Pca2₁空间群，晶体学数据为：a=0.926 26(8) nm，b=1.600 73(15) nm，c=1.885 22(17) nm，β=90°，V=2.795 2(4) nm³，Z=4，μ=1.783 mm^-1，D_c=1.690 g·cm^-3，R₁=0.027 9，wR₂=0.064 8；配位聚合物2晶体属单斜晶系，P2₁/n空间群，晶体学数据为：a=0.900 68(7) nm，b=0.452 03(4) nm，c=1.568 02(12) nm，β=106.075 0(10)°，V=0.613 43(9) nm³，Z=1，μ=1.799 mm^-1，D_c=2.082 g·cm^-3，R₁=0.019 8，wR₂=0.055 8。在配合物1中，配体分子以双齿配位模式与锌离子配位，而在配合物2中，它以三齿配位模式与镉离子配位。2个配合物均具有二维网状结构。     

一种新的有机-无机混配配位聚合物[Zn(N3)2(bpp)]n的自组装及晶体结构(bpp=1，3-二吡啶丙烷)

A novel coordination polymer [Zn(N₃)₂(bpp)]_n[bpp=1，3-bis(4-pyridyl)-propane] was synthesized at room temperature and structurally characterized by means of X-ray single crystal diffraction. The results show that the polymer exhibits a linear chain structure; the Zn-Zn distance is 12.235?. Each Zn(Ⅱ) ion is coordinated by two nitrogen atoms from bpp ligands and two nitrogen atoms from azido (N₃^-) groups， the coordination geometry of Zn(Ⅱ) ion is a slightly distorted tetrahedron， the angles around Zn(Ⅱ) ions are from 103.27° to 121.37°. In the solid-state structure of the polymer， the linear chains are stacked with parallel mode along a direction. Moreover， between adjacent chains， there are π-π interactions between pyridine rings， which are arranged in face-to-face fashion with interplanar distances of av. 3.821?. CCDC： 189591.     

亚乙基硫脲配位聚合物[Cu3(etu)3 Br3]n的合成与晶体结构

CuB r2和亚乙基硫脲反应生成Cu(I)配位聚合物[Cu3(etu)3B r3]n(etu=亚乙基硫脲),单晶X射线衍射测得该晶体为三斜晶系,Pī空间群.晶胞参数:a=0.762 46(6)nm,b=1.198 48(10)nm,c=1.224 52(7)nm,α=68.202(5),°β=74.607(6),°γ=87.652(7)°,V=0.999 61(13)nm3,Z=2,Mr=736.82,Dc=2.448 g.cm-3,μ=9.477 mm-1,F(000)=708,偏差因子R1=0.030 6,wR2=0.071 0.配合物由环状[Cu(etu)B r]3单元聚合而成,形成Cu4S2B r2和Cu2S4B r2聚合体,两聚合体通过μ2-S桥键交替连接,形成平行于晶胞b轴的[Cu3(μ3-etu)(μ2-etu)2(μ2-B r)2B r]n一维链.Cu(I)均为变形四面体配位,亚乙基硫脲以S原子与Cu(I)结合,形成μ2-S和μ3-S两种配位方式.     

杯[6]芳烃聚合物的合成与吸附性能

合成了一系列新型含酰氨基和酯基的杯[6]芳烃聚合物，并研究了它们对阳离子的吸附性能。发现与杯[4]聚合物相比，它们对体积较大的阳离子有较好的吸附作用，其中聚合物2c还对Ag^ 表现出较好的选择性吸附能力。     

Synthesis and Crystal Structure of a 2D Coordination Polymer： [Nd2（PDB）2（CH3COO）2（H2O）3]

A novel coordination polymer [Nd2（PDB）2（CH3COO）2（H2O）3] （H2PDB = pyridine3,4-dicarboxylic acid） has been synthesized by the reaction of Nd（CH3COO）3 with pyridine3,4-dicarboxylic acid under hydrothermal conditions. Elemental analysis, IR spectra and X-ray crystal structure analysis were carried out to determine the composition and crystal structure of the title complex which belongs to the triclinic system, space group P^-1 with a = 6.9409（14）, b = 7.5497（15）, c = 22.530（5）A, α = 84.79（3）, β = 88.15（3）, γ= 75.55（3）^o, C18H18N2O15Nd2, Mr = 790.82, Z = 2, V = 1138.5（4） A^3, Dc = 2.307 g/cm^3,μ = 4.593 mm^-1, -6≤h≤8, -5≤k ≤8, -26≤l≤ 26, F（000） = 760, Rint = 0.0298, R= 0.0314 and wR= 0.0695 （I〉 2σ（I））. Nd（1） and Nd（2） are linked into zigzag chains by carboxylate groups of acetate with interesting μ3-η^2：η^2 fashion. The zigzag chains are bridged by PDB to form a 2D framework, and a 3D supramolecular network is further constructed via π-π stacking.