Synthesis and characterization of new LnxSb2−xSe3 (Ln: Yb, Er) nanoflowers and their physical properties

New Ln_xSb_2−xSe₃ (Ln: Yb³⁺, Er³) based nanomaterials were synthesized by a co-reduction method. Powder XRD patterns indicate that the Ln_xSb_2−xSe₃crystals (Ln=Yb³⁺, Er³⁺, x=0.00-0.12) are isostructural with Sb₂Se₃. The cell parameters b and c decrease for Ln=Er³⁺ and Yb³⁺ upon increasing the dopant content (x), while a increases. SEM images show that doping of the lanthanide ions in the lattice of Sb₂Se₃ generally results in nanoflowers. UV-vis absorption and emission spectroscopy reveals mainly electronic transitions of the Ln³⁺ ions in case of Yb³⁺ doped nanomaterials. Emission spectra of doped materials, in addition to the characteristic red emission peaks of Sb₂Se₃, show additional emission bands centered at 955 nm, originating from the ²F_7/2→²F_5/2 transition (f-f transitions) of the Yb³⁺ ions. DSC curves indicate that Sb₂Se₃ has the highest thermal stability. The temperature dependence of the electrical resistivity of doped-Sb₂Se₃ with Yb³⁺ and Er³⁺ was studied.     

Co-reduction synthesis of new LnxSb2−xS3 (Ln: Nd, Lu, Ho) nanomaterials and investigation of their physical properties

New Ln_xSb_2−xS₃ (Ln: Lu³⁺, Ho³⁺, Nd³⁺)-based nanomaterials were synthesized by a co-reduction method. Powder XRD patterns indicate that the Ln_xSb_2−xS₃ crystals (Ln=Lu³⁺, Ho³⁺, x=0.00−0.1 and Ln=Nd³⁺, x=0.00−0.08) are isostructural with Sb₂S₃. SEM images show that doping of Lu³⁺ and Ho³⁺ ions in the lattice of Sb₂S₃ results in nanorods while that in Nd³⁺ leads to nanoflowers. UV-vis absorption and emission spectroscopy reveal mainly electronic transitions of the Ln³⁺ ions in case of Ho³⁺ and Nd³⁺ doped nanomaterials. Emission spectra show intense transitions from excited to ground state of Ln³⁺. Emission spectra of doped materials, in addition to the characteristic red emission peaks of Sb₂S₃, show other emission bands originating from f-f transitions of the Ho³⁺ ions. TGA curves indicated that Sb₂S₃ has the highest thermal stability. The electrical conductance of Ln-doped Sb₂S₃ is higher than undoped Sb₂S₃, and increase with temperature.     

Luminescence enhancement in bromine and samarium co-doped TiO2 semiconductor nanocrystalline powders

In this paper, TiO₂:Sm³⁺ (0.75 mol%) nanoparticles doped with different amounts of Br⁻ were prepared by an improved sol-gel method and were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), VG ESCALAB MKIIX-ray photoelectron spectrometer (XPS) and ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS). Their photoluminescence (PL) properties were investigated at room temperature. The emissions of ⁴G_5/2-⁶H_J (J=5/2, 7/2, 9/2) transitions of Sm³⁺ ions were observed under the excitation wavelength at 350 nm and the emission intensity depended strongly on the doping amount of Br⁻. TiO₂:Sm³⁺ (0.75 mol%) nanoparticles doped with 1 mol% of Br⁻ calcined at 700 °C exhibit highest intensity of luminescence, which is nearly three times than the undoped one. The mechanism of photoluminescence in the co-doped system was discussed.     

The ESR study of single crystal spinel ZnCr2Se4 diluted with Sb and V

The single crystal of Sb³⁺ and V³⁺ doped zinc chromium selenide spinel ZnCr₂Se₄ were prepared by a chemical transport method and characterized by ESR spectroscopy in order to examine the effect of nonmagnetic antimony and magnetic vanadium on properties of the system. For antimony admixtures the Neel temperature is very similar to that of the parent spinel ZnCr₂Se₄ (22 K). However, upon incorporating vanadium ions, the T_N temperature decreases down to 17.5 K, determined for the maximum vanadium content (x=0.06). The temperature dependence of the ESR linewidth over paramagnetic region is interpreted by an occurrence of spin-phonon interaction. The strong broadening linewidth together with its strong temperature dependence for vanadium doped ZnCr₂Se₄ is explained by the complex paramagnetic relaxation model.     

Fluorescence enhancement of oxide fluoride glass co-doped with TbF3 and SmF3

The fluorescence property of xTbF₃-BaF₂-AlF₃-GeO₂+ySmF₃ (x=0.01-40 mol%, y=0-5 wt%) glasses were investigated. The enhancement of Sm³⁺ fluorescence was recognized in the presence of Tb³⁺. Increasing Tb³⁺ content, the emission color changed from green to orange. When the intensity of fluorescence at 540 nm originated from Tb³⁺ is compared with that at 600 nm originated from Sm³⁺, the information about the concentration quenching of Tb³⁺ and Sm³⁺ was obtained. From these results, rare earth ions were dispersed identically in the glasses. After heating to 673 K or cooling to 77 K, the emission color of 20TbF₃-20BaF₂-10AlF₃-50GeO₂/mol%+0.05 wt% SmF₃ glass was reversibly changed from orange to green. In addition, while the emission from 10TbF₃-20BaF₂-10AlF₃-60GeO₂+0.01 wt% SmF₃ glass was green, its crystallized sample, prepared by annealing at 1073 K, exhibited an orange emission due to Sm³⁺ at room temperature.     

Synthesis and luminous characteristics of Ba2MgSi2−xAlxO7: 0.1Eu, 0.1Mn phosphor for WLED

The shift of the emission band to longer wavelength (yellow-orange) of the Ba₂MgSi_2−xAl_xO₇: 0.1Eu²⁺ phosphor under the 350-450 nm excitation range has been achieved by adding the codoping element (Mn²⁺) in the host. The single-host silicate phosphor for WLED, Ba₂MgSi_2−xAl_xO₇: 0.1Eu²⁺, 0.1Mn²⁺ was prepared by high-temperature solid-state reaction. It was found experimentally that, its three-color emission peaks are situated at 623, 501 and 438 nm, respectively, under excitation of 350-450 nm irradiation. The emission peaks at 438 and 501 nm originate from the transition 5d to 4f of Eu²⁺ ions that occupy the two Ba²⁺ sites in the crystal of Ba₂MgSi_2−x Al_xO₇, while the 623 nm emission is attributed to the energy transfer from Eu²⁺ ions to Mn²⁺ ions. The white light can be obtained by mixing the three emission colors of blue (438 nm), green (501 nm) and red (623 nm) in the single host. When the concentrations of the Al³⁺, Eu²⁺ and Mn²⁺ ions were 0.4, 0.1 and 0.1 mol, respectively, the sample presented intense white emission. The addition of Al ion to the host leads to a substantial change of intensity ratio between blue and green emissions. White light could be obtained by combining this phosphor with 405 nm light-emitting diodes. The near-ultraviolet GaN-based Ba₂MgSi_1.7 Al_0.3O₇: 0.1Eu²⁺, 0.1Mn²⁺ LED achieves good color rendering of over 85.     

Synthesis and luminescence properties of europium doped YBa3B9O18

Europium (Eu³⁺) doped YBa₃B₉O₁₈ were synthesized by conventional solid state solidification methods. (Y_1−xEu_x)Ba₃B₉O₁₈ formed solid solutions in the range of x=0–1.0. The luminescence property measurements upon excitation in ultraviolet–visible range show well-known Eu³⁺ excitation and emission. The charge transfer excitation band of Eu³⁺ dominates the excitation spectra. The emission spectrum of Eu³⁺ ions consists mainly of several groups of lines in the 550–720 nm region, due to the transitions from the ⁵D₀ level to the levels ⁷F_J (J=0, 1, 2, 3, 4) of Eu³⁺ ions. The dependence of luminescence intensity on Eu³⁺ concentration shows no concentration quenching for fully concentrated EuBa₃B₉O₁₈. Eu³⁺ doped YBa₃B₉O₁₈ are promising phosphors for applications in displays and optical devices.     

Effect of Sm,Co codoping on the dielectric and magnetoelectric properties of BiFeO3 polycrystalline ceramics

Multiferroic Bi_0.95Sm_0.05Fe_1−xCo_xO₃ (x=0−0.1) ceramics were prepared by the rapid liquid phase sintering method. For all the samples studied, the dielectric constant and dielectric loss decrease with increasing frequency in the range from 1 kHz to 1 MHz. It shows that the dielectric constant of Bi_0.95Sm_0.05FeO₃ at 10 kHz is about forty times larger than that of pure BiFeO₃. This dramatic change in the dielectric properties of Bi_0.95Sm_0.05Fe_1−xCo_xO₃ (x=0−0.1) samples can be understood in terms of the space charge limited conduction associated with crystal defects, which was indicated by the increase of magnetoelectric effect with doping Co³⁺ under applied magnetic field from 1 to 8 kOe. It was believed that the ferroelectric polarization enhancement comes from the exchange interaction between the Sm³⁺ and Fe³⁺ or Co³⁺ ions for Bi_0.95Sm_0.05Fe_0.95Co_0.05O₃ at room temperature.     

Crystal structure and photoluminescence of (Y1−xCex)2Si3O3N4

Oxonitridosilicate phosphors with compositions of (Y_1−xCe_x)₂Si₃O₃N₄ (x=0−0.2) have been synthesized by solid state reaction method. The structures and photoluminescence properties have been investigated. Ce³⁺ ions have substituted for Y³⁺ ions in the lattice. The emission and excitation spectra of these phosphors show the characteristic photoluminescence spectra of Ce³⁺ ions. Based on the analyses of the diffuse reflection spectra and the PL spectra, a systematic energy diagram of Ce³⁺ ion in the forbidden band of sample with x=0.02 is given. The best doping Ce content in these phosphors is ∼2 mol%. The quenching temperature is ∼405 K for the 2 mol% Ce content sample. The luminescence decay properties were investigated. The primary studies indicate that these phosphors are potential candidates for application in three-phosphor-converted white LEDs.     

Enhanced photoluminescence of Sm/Bi co-doped Gd2O3 phosphors by combustion synthesis

Gd₂O₃:Sm³⁺ and Gd₂O₃:Sm³⁺,Bi³⁺ powders were prepared by a combustion method. Their structures were determined using X-ray diffraction. UV-visible absorption and photoluminescence spectra were investigated for Gd₂O₃:Sm³⁺ and Gd₂O₃:Sm³⁺,Bi³⁺ at different annealing temperatures and different doping concentrations. The emission spectra of all samples presented the characteristic emission narrow lines arising from the ⁴G_5/2→⁶H_J transitions (J=5/2, 7/2, and 9/2) of Sm³⁺ ions upon excitation with UV irradiation. The emission intensity of Sm³⁺ ions was largely enhanced with introducing Bi³⁺ ions into Gd₂O₃:Sm³⁺ and the maximum occurred at a Bi³⁺ concentration of 0.5 mol%. The relevant mechanisms were discussed with the sensitization theory by Dexter and the aggregation behavior of Bi³⁺ ions.     

Structural, magnetic properties and magnetostriction studies of Sm1−xNdxFe1.55 alloys

Structural, magnetic properties and magnetostriction studies of Sm_1−xNd_xFe_1.55 (0≤x≤0.56) alloys have been performed. X-ray diffraction analysis confirms the presence of single cubic Laves phase in Sm_1-xNd_xFe_1.55 alloys with 0≤x≤0.48. The lattice parameter of alloys increases linearly with increase in Nd content while the Curie temperature behaves in the opposite way. The alloy x=0.08 exhibits a giant magnetostriction value (λ_∥-λ_⊥) of −2187 ppm at a magnetic field of 12 kOe due to the anisotropy compensation between Sm³⁺ and Nd³⁺ ions.     

Interaction of Sb ions with Eu ions during the room temperature synthesis of luminescent Sb2O3 nanorods: Probed through Eu luminescence

The interaction of Eu³⁺ with Sb³⁺ ions during the room temperature synthesis of luminescent Sb₂O₃ nanorods is investigated using luminescence and vibrational spectroscopic techniques. Our results demonstrate that well crystalline, oriented Sb₂O₃ nanorods having length of around 3-4 μm, a width of around 100-200 nm and luminescence at around 390 nm can be synthesized at room temperature. Incorporation of Eu³⁺ in these nanorods has been attempted and it is found that Eu³⁺ ions do not have any interaction with nanorods and their orientation. Detailed Eu³⁺ luminescence and XRD studies confirmed that a part of Sb³⁺ ions reacts with Eu³⁺ ions in the presence of hydroxyl ions (present in the medium) to form an amorphous antimony europium hydroxide compound. The amorphous compound on heating at high temperatures leads to its decomposition, giving hydrated Sb(V) oxides and Eu₂O₃ as major phases.     

Double metal-insulator peaks and effect of Sm substitution on magnetic and transport properties of hole-doped La0.85Ag0.15MnO3

La_0.85−xSm_xAg_0.15MnO₃ (x=0−0.2) ceramics were prepared using the conventional solid-state synthesis method to investigate the effect of Sm³⁺ substitution on magnetic and electrical transport properties. Magnetic susceptibility versus temperature measurements showed all samples exhibit ferromagnetic to paramagnetic transition with Curie temperature, T_c decreasing from 283 K (x=0) to 164 K (x=0.2) with increasing Sm³⁺. The observed slope in susceptibility, χ′ versus temperature curves below T_c indicates the possible presence of FM and AFM phases in the metallic region. In addition, a deviation from the Curie-Weiss law above T_c in 1/χ′ versus T curves indicates the existence of a Griffith's phase in the x=0.05−0.2 samples due to the Sm³⁺ ion substitution. The Griffith temperature, T_G was found to decrease from 295 K (x=0.05) to 229 K (x=0.2). Electrical resistivity measurements of the samples in zero field showed transition from metallic behavior to insulating behavior as the temperature was increased. For x=0, two metal-insulator, MI transition peaks were observed at T_p1=282 K and at T_p2=250 K. Both peaks shifted to lower temperatures with the increase in Sm³⁺. The relative resistivity of the first peak to the second peak decreases with increasing Sm³⁺ for x>0.05 while at x=0.2 the T_p1 peak was strongly suppressed. Magnetoresistance, MR was observed to weaken with Sm³⁺ substitution. The metallic region of the ρ(T) curve of the x=0−0.15 samples was fitted to the model of electron-electron and electron-magnon scattering while the insulating region was fitted to the variable range hopping, VRH model. The resistivity behavior indicated that the substitution of Sm³⁺ weakened the double exchange process and enhanced the Jahn-Teller effect. Our results indicated that the T_p1 peak is strongly related to the double-exchange mechanism while the T_p2 peak is suggested to originate from magnetic inhomogeneity.     

Influence of Sm-substitution on structure and electromagnetic properties of Ba3−xSmxCo2Fe24O41 powders

Sm-substituted barium hexaferrites, Ba_3−xSm_xCo₂Fe₂₄O₄₁ (x=0-0.25), were prepared by a conventional ceramic sintering method. The microstructure, complex permittivity, complex permeability and static magnetic properties of the samples were studied using powder X-ray diffraction, field emission scanning electron microscopy, vector network analyzer and vibrating sample magnetometry. The results reveal that by introducing a relatively small amount of Sm³⁺ instead of Ba²⁺ an important modification of both structure and high-frequency electromagnetic properties can be obtained. Doping of Sm³⁺ suppressed the grain growth and gave rise to a decrease of the grain size. As the Sm content increases, the static magnetic properties continuously increase. The real part and imaginary part of complex permittivity initially increase with Sm content, and then decreases when x>0.10. The imaginary part of complex permeability decreases after Sm³⁺ is doped. There is no obvious change in the real part of the complex permeability for different Sm contents. The reasons are discussed using electromagnetic theory.     

Synthesis and Sm/Sm doping effects on photoluminescence properties of Sr4Al14O25

Complete and partial samarium reduction was achieved under strong reducing atmosphere by solid-state and combustion synthesis of Sr_3.96Sm_0.04Al₁₄O₂₅. Dependence of different fluxing agents on the formation of various strontium aluminates was examined. The samples were investigated by X-ray powder diffraction, temperature dependent luminescence decay and photoluminescence measurements. Excitation with UV radiation resulted in sharp and well resolved emission lines of samarium ions. Distinct temperature behavior for Sm²⁺ and Sm³⁺ were detected in the range of 100-500 K. Estimated emission thermal quenching values (TQ_1/2) for divalent samarium were approximately 270 K while for trivalent state around 660 K. Measured luminescence decay values of Sm²⁺ are substantially lower than for Sm³⁺,≈1.7 and ≈2.7 ms, respectively. The spectral feature of Sm²⁺ emission spectrum indicates that dopant occupies low symmetry site in Sr₄Al₁₄O₂₅ compound.     

Photoluminescence properties and effects of dopant concentration in Bi2ZnB2O7:Tb phosphor

A novel green phosphor, Tb³⁺ doped Bi₂ZnB₂O₇ was synthesized by conventional solid state reaction method. The phase of synthesized materials was determined using the XRD, DTA/TG and FTIR. The photoluminescence characteristics were investigated using spectrofluorometer at room temperature. Bi₂ZnB₂O₇:Tb³⁺ phosphors excited by 270 nm and 485 nm wavelengths. The emission spectra were composed of three bands, in which the dominated emission of green luminescence Bi₂ZnB₂O₇:Tb³⁺ attributed to the transition ⁵D₄ → ⁷F₅ is centered at 546 nm. The dependence of the emission intensity on the Tb³⁺ concentration for the Bi_2−xTb_xZnB₂O₇ (0.01 ≤ x ≤ 0.15) was studied and observed that the optimum concentration of Tb³⁺ in phosphor was 13 mol% for the highest emission intensity at 546 nm.     

Preparation, crystal structure and photoluminescence of Mn-doped magnesium pyroborates solid solutions, (Mg1-xMnx)2B2O5

Solid solutions of manganese(II)-doped magnesium pyroborate, ((Mg_1−xMn_x)₂B₂O₅, 0<x≤0.30, triclinic system, space group: P1¯ (no. 2)), were synthesized by solid state reaction. The unit cell parameters were refined by the Rietveld method of powder X-ray diffraction patterns. (Mg_1−xMn_x)₂B₂O₅ showed broad red emission at 670 nm under 414 nm excitation. The wavelengths of the emission peak did not depend on the manganese content. Absorption of the d-d transitions of Mn²⁺ ions was observed in the photoluminescence excitation spectra. The emission intensity reached the maximum at a Mn content (x) of 0.05 and decreased with increasing x from 0.05 to 0.30.     

Charge order melting and magnetic transition in Nd0.5(1+x)Ca0.5(1−x)Mn(1−x)CrxO3 system

The magnetic property of double doped manganite Nd_0.5(1+x)Ca_0.5(1−x)Mn_(1−x)Cr_xO₃ with a fixed ratio of Mn³⁺:Mn⁴⁺=1:1 has been investigated. For the undoped sample, it undergoes one transition from charge disordering to charge ordering (CO) associated with paramagnetic (PM)-antiferromagnetic (AFM) phase transition at T<250 K. The long range AFM ordering seems to form at 35 K, rather than previously reported 150 K. At low temperature, an asymmetrical M-H hysteresis loop occurs due to weak AFM coupling. For the doped samples, the substitution of Cr³⁺ for Mn³⁺ ions causes the increase of magnetization and the rise of T_c. As the Cr³⁺ concentration increases, the CO domain gradually becomes smaller and the CO melting process emerges. At low temperature, the FM superexchange interaction between Mn³⁺ and Cr³⁺ ions causes a magnetic upturn, namely, the second FM phase transition.     

Synthesis and photoluminescence properties of Sm-doped CaWO4 nanoparticles

The Sm³⁺-doped CaWO₄ nanoparticles were synthesized by hydrothermal method. The room temperature photoluminescence (PL) spectra of Sm³⁺-doped CaWO₄ nanoparticles doped with different Sm³⁺ concentrations under 405 nm excitation have been investigated. The PL spectra showed four strong emission peaks at 460, 571, 609, and 653 nm. The first emission peak at 460 nm could be due to a structural defect of the lattice, an oxygen-deficient WO₃ complex. The other three emissions at 571, 609, and 653 nm were due to the f-f forbidden transitions of the 4f electrons of Sm³⁺, corresponding to ⁴G_5/2→⁶H_5/2 (571 nm), ⁶H_7/2 (609 nm), and ⁶H_9/2 (653 nm), respectively. In addition, the optimum Sm³⁺ concentration in CaWO₄ nanoparticles for optical emission was determined to be 1.0%. The Sm³⁺⁴G_5/2→⁶H_7/2 (609 nm) emission intensity of Sm³⁺-doped CaWO₄ nanoparticles significantly increased with the increase of Sm³⁺ concentration, and showed a maximum when Sm³⁺ doping content was 1.0%. If Sm³⁺ concentration continued to increase, namely more than 1.0%, the Sm³⁺⁴G_5/2→⁶H_7/2 emission intensity would decrease. The present materials might be a promising phosphor for white-light LED applications.     

Third-order nonlinear optical properties of Bi2S3 and Sb2S3 nanorods studied by the Z-scan technique

Bismuth sulfide (Bi₂S₃) and antimony sulfide (Sb₂S₃) nanorods were synthesized by hydrothermal method. The products were characterized by UV-vis spectrophotometer, X-ray powder diffraction (XRD) and transmission electron microscope (TEM). Bi₂S₃ and Sb₂S₃ nanorods were measured by Z-scan technique to investigate the third-order nonlinear optical (NLO) properties. The result of NLO measurements shows that the Bi₂S₃ and Sb₂S₃ nanorods have the behaviors of the third-order NLO properties of both NLO absorption and NLO refraction with self-focusing effects. The third-order NLO coefficient χ⁽³⁾ of the Bi₂S₃ and Sb₂S₃ nanorods are 6.25×10⁻¹¹ esu and 4.55×10⁻¹¹ esu, respectively. The Sb₂S₃ and Bi₂S₃ nanorods with large third-order NLO coefficient are promising materials for applications in optical devices.