Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.     

离子液体-水介质中离子液体负载TEMPO催化选择氧化合成脂肪醇羟基芳香醛和酮

由于脂肪醇羟基和苄醇羟基具有相同的氧化反应活性,所以当分子内同时含有脂肪醇羟基和苄醇羟基时,很难选择氧化苄醇羟基合成含脂肪醇羟基的芳香醛或酮。本文报道了在离子液体-水介质中,NCS/NaBr/IL-TEMPO（离子液体负载TEMPO）催化氧化合成含有脂肪醇羟基的芳香醛、酮的方法,反应条件温和,选择性好,收率高,且离子液体和催化剂可以循环使用。     

Tungstate supported mesoporous silica SBA‐15 with imidazolium framework as a hybrid nanocatalyst for selective oxidation of sulfides in the presence of hydrogen peroxide

In this work, a new heterogeneous catalyst (SBA‐15/Im/WO₄^2?) was prepared, and then its performance in the oxidation of organic sulfides was studied (using 30% H₂O₂ as green oxidant under neutral reaction conditions). This organic–inorganic hybrid mesoporous material was characterized by various techniques, such as FT‐IR, inductively coupled plasma, X‐ray powder diffraction, high‐resolution‐transmission electron microscopy, N₂ adsorption–desorption and thermogravimetric analysis. The catalyst was also applied to the selective oxidation of various sulfides. The hybrid catalyst was easily recovered, and was very stable and retained good activity for at least five successive runs without any additional activation. Moreover, there was no remarkable decrease in the activity and selectivity of the catalyst. The products could be easily isolated by just removing the solvent after filtering the catalyst. The yields of the catalytic productions through this catalyst were in the range from 75% to 97%.     

Axial base‐controlled catalytic activity,oxidative stability and product selectivity of water‐insoluble manganese and iron porphyrins for oxidation of styrenes in water under green conditions

A series of water‐insoluble iron(III) and manganese(III) porphyrins, FeT(2‐CH₃)PPCl, FeT(4‐OCH₃)PPCl, FeT(2‐Cl)PPCl, FeTPPCl, MnT(2‐CH₃)PPOAc, MnT(4‐OCH₃)PPOAc, MnT(2‐Cl)PPOAc and MnTPPOAc, in the presence of imidazole (ImH), F^?, Cl^?, Br^? and acetate were used as catalysts for the aqueous‐phase heterogeneous oxidation of styrenes to the corresponding epoxides and aldehydes with sodium periodate. Also, the effect of various reaction parameters such as reaction time, molar ratio of catalyst to axial base, type of axial base, molar ratio of olefin to oxidant and nature of metal centre on the activity and oxidative stability of the catalysts and the product selectivity was investigated. Higher catalytic activities were found for the iron complexes. Interestingly, the selectivity towards the formation of epoxide and aldehyde (or acetophenone) was significantly influenced by the type of axial base. Furthermore, Br^? and ImH were found to be the most efficient co‐catalysts for the oxidation of olefins performed in the presence of the manganese and iron porphyrins, respectively. The optimized molar ratio of catalyst to axial base was different for various axial bases. Also, the order of co‐catalyst activity of the axial bases obtained in aqueous medium was different from that reported for organic solvents. The use of a convenient axial base under optimum reaction catalyst to co‐catalyst molar ratio in the presence of the manganese porphyrin gave the oxidative products with a conversion of ca 100% in a reaction time of less than 3 h. However, the catalytic activity of the iron porphyrins could not be effectively improved by increasing the catalyst to co‐catalyst molar ratio.     

Electrochemical Oxidative Detection of Guanosine‐5′‐triphosphate Based on a New Ionic Liquid Modified Carbon Paste Electrode

An ionic liquid (IL) 1‐(3‐chloro‐2‐hydroxy‐propyl)‐3‐methylimidazolium trifluoroacetate was used as the modifier for the preparation of the modified carbon paste electrode (CPE). The IL‐CPE showed excellent electrocatalytic activity towards the oxidation of guanosine‐5′‐triphosphate (5′‐GTP) in a pH 5.0 Britton‐Robinson buffer solution. Due to the presence of high conductive IL on the electrode surface, the electrooxidation of 5′‐GTP was greatly promoted with a single well‐defined irreversible oxidation peak appeared. The electrode reaction was an adsorption‐controlled process and the electrochemical parameters of 5′‐GTP on IL‐CPE were calculated with the electron transfer coefficient (α) as 0.44, the electron transfer number (n) as 1.99, the apparent heterogeneous electron transfer rate constant (k_s) as 2.21 × 10^?9 s^?1 and the surface coverage (Γ_T) as 1.53 × 10^?10 mol cm^?2. Under the selected conditions a linear calibration curve between the oxidation peak currents and 5′‐GTP concentration was obtained in the range from 2.0 to 1000.0 μmol L^?1 with the detection limit as 0.049 μmol L^?1 (3σ) by differential pulse voltammetry. The proposed method showed good selectivity to the 5‘‐GTP detection without the interferences of coexisting substances and the practical application was checked by measurements of the artificial samples.     

Determination of triazine herbicides in juice samples by microwave‐assisted ionic liquid/ionic liquid dispersive liquid–liquid microextraction coupled with high‐performance liquid chromatography

A novel microextraction method, termed microwave‐assisted ionic liquid/ionic liquid dispersive liquid–liquid microextraction, has been developed for the rapid enrichment and analysis of triazine herbicides in fruit juice samples by high‐performance liquid chromatography. Instead of using hazardous organic solvents, two kinds of ionic liquids, a hydrophobic ionic liquid (1‐hexyl‐3‐methylimidazolium hexafluorophosphate) and a hydrophilic ionic liquid (1‐butyl‐3‐methylimidazolium tetrafluoroborate), were used as the extraction solvent and dispersion agent, respectively, in this method. The extraction procedure was induced by the formation of cloudy solution, which was composed of fine drops of 1‐hexyl‐3‐methylimidazolium hexafluorophosphate dispersed entirely into sample solution with the help of 1‐butyl‐3‐methylimidazolium tetrafluoroborate. In addition, an ion‐pairing agent (NH₄PF₆) was introduced to improve recoveries of the ionic liquid phase. Several experimental parameters that might affect the extraction efficiency were investigated. Under the optimum experimental conditions, the linearity for determining the analytes was in the range of 5.00–250.00 μg/L, with the correlation coefficients of 0.9982–0.9997. The practical application of this effective and green method is demonstrated by the successful analysis of triazine herbicides in four juice samples, with satisfactory recoveries (76.7–105.7%) and relative standard deviations (lower than 6.6%). In general, this method is fast, effective, and robust to determine triazine herbicides in juice samples.     

Protic Ionic Liquid Promoted One Pot Synthesis of 2‐amino‐4‐(phenyl)‐7‐methyl‐5‐oxo‐4H,5H‐pyrano[4,3‐b]pyran‐3‐carbonitrile Derivatives in Water and Their Antimycobacterial Activity

One pot three component reaction of 4‐hydroxy‐6‐methylpyran‐2‐one, 3‐methoxy benzaldehyde, and malononitrile in water using protic ionic liquid as a catalyst at room temperature afforded pyrano[4,3‐b]pyran derivatives. Protic ionic liquid has been proved to be an efficient and mild catalyst for the synthesis of pyrano[4,3‐b]pyran scaffolds due to their highly polar nature. The notable aspects of protic ionic liquid are easy availability, improved reaction rates, high product yields, simple workup procedure, recyclability, and reusability. Molecules docking studies have been performed on enzyme enoyl‐ACP‐reductase from Mycobacterium tuberculosis. The molecular docking simulation indicated plausible π‐alkyl and alkyl‐alkyl interactions between the amino acids and scaffolds. The synthesized derivatives have been evaluated for their in vitro antituberculotic activity against M. tuberculosis H₃₇RV strain using Microplate Alamar Blue Assay method. Together, biological activity data and docking data showed that the tested scaffolds exhibited excellent antituberculotic activity.     

Hollow Metal–Organic‐Framework‐Mediated In Situ Architecture of Copper Dendrites for Enhanced CO2 Electroreduction

Electrocatalytic reduction of CO₂ to a single product at high current densities and efficiencies remains a challenge. However, the conventional electrode preparation methods, such as drop‐casting, usually suffer from low intrinsic activity. Herein, we report a synthesis strategy for preparing heterogeneous electrocatalyst composed of 3D hierarchical Cu dendrites that derived from an in situ electrosynthesized hollow copper metal–organic framework (MOF), for which the preparation of the Cu‐MOF film took only 5 min. The synthesis strategy preferentially exposes active sites, which favor's the reduction of CO₂ to formate. The current density could be as high as 102.1 mA cm^?2 with a selectivity of 98.2 % in ionic‐liquid‐based electrolyte and a commonly used H‐type cell.     

Zinc‐containing ionic liquid as a dual solvent‐catalyst in base‐free condensations under ultrasonic irradiation

In this study, natural‐based ionic liquid (IL) using caffeine (Caff), trietahnolamine (TEA) and ZnBr₂, [Caff‐TEA]⁺[ZnBr₃]^?, which features high catalytic activity and environmentally‐friendly nature was synthesized with melting point of 76 °C by a facile method. The synthesized [Caff‐TEA]⁺[ZnBr₃]^? has high catalytic activity as both of catalyst and solvent in condensation reactions for the synthesis of benzylidenes, bis‐hydroxyenones and xanthenes. Synthesized IL was characterized by proton nuclear magnetic resonance (¹HNMR), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD) and Energy‐dispersive X‐ray spectroscopy (EDX) analysis. Also synthesized heterocycles were characterized by FT‐IR, proton nuclear magnetic resonance (¹HNMR) and carbon nuclear magnetic resonance (¹³CNMR).     

Hydride‐Rhodium(III)‐N‐Heterocyclic Carbene Catalysts for Vinyl‐Selective H/D Exchange: A Structure–Activity Study

A series of neutral and cationic Rh^III‐hydride and Rh^III‐ethyl complexes bearing a NHC ligand has been synthesized and evaluated as catalyst precursors for H/D exchange of styrene using CD₃OD as a deuterium source. Various ligands have been examined in order to understand how the stereoelectronic properties can modulate the catalytic activity. Most of these complexes proved to be very active and selective in the vinylic H/D exchange, without deuteration at the aromatic positions, displaying very high selectivity toward the β‐positions. In particular, the cationic complex [RhClH(CH₃CN)₃(IPr)]CF₃SO₃ showed excellent catalytic activity, reaching the maximum attainable degree of β‐vinylic deuteration in only 20 min. By modulation of the catalyst structure, we obtained improved α/β selectivity. Thus, the catalyst [RhClH(κ²‐O,N‐C₉H₆NO)(SIPr)], bearing an 8‐quinolinolate ligand and a bulky and strongly electron‐donating SIPr as the NHC, showed total selectivity for the β‐vinylic positions. This systematic study has shown that increased electron density and steric demand at the metal center can improve both the catalytic activity and selectivity. Complexes bearing ligands with very high steric hindrance, however, proved to be inactive.     

Ionic Liquids as Precursors for Efficient Mesoporous Iron‐Nitrogen‐Doped Oxygen Reduction Electrocatalysts

A ferrocene‐based ionic liquid (Fe‐IL) is used as a metal‐containing feedstock with a nitrogen‐enriched ionic liquid (N‐IL) as a compatible nitrogen content modulator to prepare a novel type of non‐precious‐metal–nitrogen–carbon (M‐N‐C) catalysts, which feature ordered mesoporous structure consisting of uniform iron oxide nanoparticles embedded into N‐enriched carbons. The catalyst Fe¹⁰@NOMC exhibits comparable catalytic activity but superior long‐term stability to 20 wt % Pt/C for ORR with four‐electron transfer pathway under alkaline conditions. Such outstanding catalytic performance is ascribed to the populated Fe (Fe₃O₄) and N (N2) active sites with synergetic chemical coupling as well as the ordered mesoporous structure and high surface area endowed by both the versatile precursors and the synthetic strategy, which also open new avenues for the development of M‐N‐C catalytic materials.     

Hydrophobic Modification of Pd/SiO2@Single‐Site Mesoporous Silicas by Triethoxyfluorosilane: Enhanced Catalytic Activity and Selectivity for One‐Pot Oxidation

To enhance the catalytic activity in a selective one‐pot oxidation using in‐situ generated H₂O₂, a hydrophobically modified core–shell catalyst was synthesized by means of a simple silylation reaction using the fluorine‐containing silylation agent triethoxyfluorosilane (TEFS, SiF(OEt)₃). The catalyst consisted of a Pd‐supported silica nanosphere and a mesoporous silica shell containing isolated Ti^IV and F ions bonded with silicon (Si?F bond). Structural analyses using XRD and N₂ adsorption–desorption suggested that the mesoporous structure and large surface area of the mesoporous shells were retained even after the modification. During the one‐pot oxidation of sulfide, catalytic activity was enhanced significantly by increasing the amount of fluorine in the shell. A hydrophobic surface enhanced adsorption of the hydrophobic reactant into the mesopore, while the less hydrophobic oxygenated products efficiently diffused into the outside of the shell, which improved the catalytic activity and selectivity. In addition, the present methodology can be used to enhance the catalytic activity and selectivity in the one‐pot oxidation of cyclohexane by using an Fe‐based core–shell catalytic system.     

Accelerating Oxygen‐Reduction Catalysts through Preventing Poisoning with Non‐Reactive Species by Using Hydrophobic Ionic Liquids

Developing cost‐effective electrocatalysts for the oxygen reduction reaction (ORR) is a prerequisite for broad market penetration of low‐temperature fuel cells. A major barrier stems from the poisoning of surface sites by nonreactive oxygenated species and the sluggish ORR kinetics on the Pt catalysts. Herein we report a facile approach to accelerating ORR kinetics by using a hydrophobic ionic liquid (IL), which protects Pt sites from surface oxidation, making the IL‐modified Pt intrinsically more active than its unmodified counterpart. The mass activity of the catalyst is increased by three times to 1.01 A mg^?1_Pt@0.9 V, representing a new record for pure Pt catalysts. The enhanced performance of the IL‐modified catalyst can be stabilized after 30 000 cycles. We anticipate these results will form the basis for an unprecedented perspective in the development of high‐performing electrocatalysts for fuel‐cell applications.     

Aerobic and Electrochemical Oxidative Cross‐Dehydrogenative‐Coupling (CDC) Reaction in an Imidazolium‐Based Ionic Liquid

The ionic liquid 1‐butyl‐3‐methylimidazolium tetrafluoroborate [BMIm][BF₄] has demonstrated high efficiency when applied as a solvent in the oxidative nitro‐Mannich carbon? carbon bond formation. The copper‐catalyzed cross‐dehydrogenative coupling (CDC) between N‐phenyltetrahydroisoquinoline and nitromethane in [BMIm][BF₄] occurred with high yield under the described reaction conditions. Both the ionic liquid and copper catalyst were recycled nine times with almost no lost of activity. The electrochemical behavior of the tertiary amine substrate and β‐nitroamine product was investigated employing [BMIm][BF₄] as electrolyte solvent. The potentiostatic electrolysis in ionic liquid afforded the desired product with a high yield. This result and the cyclic voltammetric investigation provide a better understanding of the reaction mechanism, which involves radical and iminium cation intermediates.     

Convenient One‐Pot Synthesis of 2,5‐Disubstituted Oxazoles via a Catalytic Oxidative Dehydrogenation of F3CSO3H·SiO2‐DDQ/CuCl2/LiCl

A facile one‐pot synthesis of 2,5‐disubstituted oxazoles was developed via cyclization of aldoximes and phenylacetylene then dehydrogenation oxidation. 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone was studied for the selective oxidation of oxazolines using Cu²⁺/Li⁺ as catalyst and O₂ as indirect oxidant. The reaction results showed that this catalyst system can effectively catalyze the oxidation of oxazolines to the corresponding oxazoles. Thus, a variety of polysubstituted oxazoles was easily synthesized in high yields by catalytic oxidation of 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone/CuCl₂/LiCl/O₂.     

Synthesis of (−)‐3‐Carene‐2,5‐dione via Allylic Oxidation of (+)‐3‐Carene

Activated carbon‐supported CuCl₂ (CuCl₂/AC) is a heterogeneous catalyst for the liquid‐phase selective allylic oxidation of (+)‐3‐carene with tert‐butyl hydroperoxide (TBHP) and O₂ to produce (?)‐3‐carene‐2,5‐dione. The possible reaction mechanism and the effects of different factors on the allylic oxidation were investigated. The optimal conditions are as follows: reaction temperature, 45 °C; molar ratio of CuCl₂ to (+)‐3‐carene, 1%; volume ratio of (+)‐3‐carene to TBHP, 1:3; and reaction time, 12 h. Under the optimal conditions, the conversion of (+)‐3‐carene reached 100%, whereas the selectivity for (?)‐3‐carene‐2,5‐dione reached 78%. The CuCl₂/AC catalyst was characterized via X‐ray diffraction, and the chemical structure of the target compound was identified via infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, mass spectrometry, and optical analysis.     

Mixed Oxides FeVOx for Selective Oxidation of Octanol to Octanal under Solvent‐free Condition

The two‐component mixed oxides FeVO_x with various molar ratio of Fe to V were prepared and their phase composition, structure and morphology were determined by XRD and SEM. This prepared material was employed for liquid‐phase oxidation of octanol using H₂O₂ as oxidant. The mixed oxide FeVO_x with 2.5 : 1 of Fe to V molar ratio was found to be an effective catalyst with high selectivity to octanal under solvent‐free condition. The relationship between the catalytic performance and phase compositions of the mixed oxides was investigated by the test of its activity and XRD characterization. The catalytic action of the active sites including redox and acidic sites formed by interaction between VO_x and FeO_x on the surface of the catalyst was discussed. The catalyst was easily recovered and reused.     

Organic–inorganic hybrid of anchored dicationic ionic liquid on Al‐MCM‐41‐phosphovanadomolybdate toward selective oxidation of benzene to phenol

A phosphovanadomolybdate hybridized with an anchored dicationic ionic liquid on Al‐MCM‐41 was prepared through the anion exchange and characterized by ¹H and ¹³C NMR, FTIR, UV–Vis, XRD, XPS, TGA, TEM, FESEM, ICP‐OES and BET techniques. The obtained data demonstrated that the composite is a porous material with the high surface area and also having a large pore volume which are 405 m² g^?1 and 0.616 cm³ g^?1 respectively. The prepared composite has shown an acceptable catalytic activity for converting benzene selectively to phenol with hydrogen peroxide as eco‐friendly oxidant. Under the optimized reaction conditions, the hybrid catalyst resulted in phenol yield of 14.8% with 100% selectivity and a TOF value of 20.0 h^?1. The catalyst also revealed a desired recovery and reusability. The efficient performance of the composite is related to the textural and polyoxometalate properties.     

Selective oxidation of alcohols with hydrogen peroxide catalyzed by tungstate ions (WO4) supported on periodic mesoporous organosilica with imidazolium frameworks (PMO-IL)

Tungstate ions supported on the periodic mesoporous organosilica with ionic liquid frameworks (WO₄⁼@PMO-IL) were found to be a recoverable catalyst system for the highly selective oxidation of various primary or secondary alcohols to the corresponding aldehydes or ketones by 30% H₂O₂ as green oxidant under neutral aqueous reaction conditions. The catalyst can be also recovered and efficiently reused in seven subsequent reaction cycles without any remarkable decreasing in the catalyst activity and selectivity. Moreover, N₂ sorption analysis, transmission electron microscopy (TEM) images, and thermal gravimetric analysis (TGA) showed that the structure regularity and functional groups loaded of the catalyst were not affected during the reaction process.     

Study of nano‐Cu/SiO2 catalysts for highly selective hydrogenation of acetophenone

Hydrogenation of acetophenone over nano‐Cu/SiO₂ catalysts was investigated. The catalysts, prepared by a liquid precipitation method using various precipitating agents, were characterized using low‐temperature nitrogen adsorption, X‐ray diffraction, temperature‐programmed desorption of ammonia, hydrogen temperature‐programmed reduction, transmission electron microscopy and X‐ray photoelectron spectroscopy. It was found that the catalysts prepared by a homogeneous precipitation method had better activity and stability than those prepared by a co‐precipitation method. The catalyst prepared using urea as precipitating agent had well‐dispersed copper species, high surface area and abundant pore structure. The catalytic performance and mechanism of the Cu/SiO₂ catalysts were further studied. It was found that the activity and stability of the catalysts could be improved by adjusting the proportion of Cu⁺/(Cu⁺ + Cu⁰). The sample prepared using urea as precipitating agent presented higher activity and selectivity. Also, the catalyst prepared using urea maintained a high catalytic performance while being continuously used for 150 h under the optimal reaction conditions.