Photocatalytic degradation of norfloxacin and its intermediate degradation products using nitrogen‐doped activated carbon–CuS nanocomposite assisted by visible irradiation

We have synthesized a nitrogen‐doped activated carbon (NAC) derived from oak using KOH and N₂ thermal treatment at 400 °C as well as CuS nanoparticles. The NAC was decorated with the synthesized CuS to apply as a photocatalyst for degradation of norfloxacin (NOR). Before its application for photodegradation, the adsorbent/photocatalyst structural properties were investigated using X‐ray diffraction, X‐ray photoelectron spectroscopy, Raman spectroscopy and scanning electron microscopy. The photocatalytic degradation of NOR was successfully done under visible light using NAC–CuS. The results revealed that the investigated fluoroquinolone degraded very efficiently and pseudo‐first‐order kinetics was adopted for the photodegradation process. In addition, isothermal studies showed that the adsorption process in darkness followed the Langmuir model. The degradation characteristics of the NAC–CuS photocatalyst were studied for 120 min and 15 h under visible light for degradation of NOR, exhibiting a good efficiency for NOR removal. During 120 min of degradation, some intermediate degradation products that can be considered as secondary pollutants were produced. Then, to degrade these pollutants the radiation time was increased up to 15 h. The results displayed a perfect degradation of NOR and its secondary pollutants. The effective variables including pH, degradation time and photocatalyst dosage were optimized and studied in a multivariate method using Design Expert 7. Determination of photodegradation products was carried out using liquid chromatography–mass spectrometry. The results are of significance for estimating the environmental fate of NOR in aqueous media.     

Comparative study of acid yellow 119 adsorption onto activated carbon prepared from lemon wood and ZnO nanoparticles loaded on activated carbon

Activated carbon from lemon wood (AC) and ZnO nanoparticles loaded on activated carbon (ZnO‐NP‐AC) were prepared and their efficiency for effective acid yellow 199 (AY 199) removal under various operational conditions was investigated. The dependence of removal efficiency on variables such as AY 199 concentration, amount of adsorbent and contact time was optimized using response surface methodology and Design‐Expert. ZnO nanoparticles and ZnO‐NP‐AC were studied using various techniques such as scanning electron microscopy, X‐ray diffraction and energy‐dispersive X‐ray analysis. The optimum pH was studied using one‐at‐a‐time method to achieve maximum dye removal percentage. Small amounts of the proposed adsorbents (0.025 and 0.025 g) were sufficient for successful removal of AY 199 in short times (4.0 and 4.0 min) with high adsorption capacity (85.51 and 116.29 mg g^?1 for AC and ZnO‐NPs‐AC, respectively). Fitting the empirical equilibrium data to several conventional isotherm models at optimum conditions indicated the appropriateness of the Langmuir model with high correlation coefficient (0.999 and 0.978 for AC and ZnO‐NPs‐AC, respectively) for representation and explanation of experimental data. Kinetics evaluation of experiments at various time intervals revealed that adsorption processes can be well predicted and fitted by pseudo‐second‐order and Elovich models. This study revealed that the combination of ZnO nanoparticles and AC following simple loading led to significant improvement in the removal process in short adsorption time which was enhanced by mixing the media via sonication.     

Facile fabrication of ZnO/N‐doped helical carbon nanotubes composites with enhanced photocatalytic activity toward organic pollutant degradation

Novel ZnO/N‐doped helical carbon nanotubes (ZnO/N‐HCNTs) composites were successfully synthesized via a facile chemical precipitation approach at room temperature. The sample was well characterized by X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy (EDS), transmission electron microscopy (TEM) and ultraviolet–visible diffuse reflectance spectroscopy (UV–vis DRS). The photocatalytic activity was evaluated in the degradation of methylene blue (MB) aqueous solution under UV light irradiation. It is found that ZnO nanoparticles were highly and uniformly anchored on the surface and inner tubes of the N‐HCNTs with size of about 5 nm, and significantly enhanced the photocatalytic activity compared to pure ZnO. The enhanced photocatalytic activity of ZnO/N‐HCNTs composites can be ascribed to the integrative synergistic effect of effective interfacial hybridization between N‐HCNTs and ZnO nanoparticles and the prolonged lifetime of photogenerated electron–hole pairs. Moreover, the ZnO/N‐HCNTs could be easily recycled without any obvious decrease in photocatalytic activity and could be promote their application in the area of environmental remediation.     

Efficient photocatalytic degradation of Acid Red 57 using synthesized ZnO nanowires

Zinc oxide photocatalyst was synthesized through a low‐temperature co‐precipitation process using zinc sulfate as precursor for the degradation of Acid Red 57 (AR57) under UV irradiation. The activities of the prepared photocatalyst at different calcination temperatures (400, 500, and 600 °C) were investigated. The synthesized zinc oxides were characterized by different techniques such as X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, N₂ adsorption–desorption, and pH titration for the determination of the zero‐point charge (pH_ZPC). The efficiency of photocatalytic degradation of ZnO prepared at the calcination temperatures of 400, 500, and 600 °C was 90.03, 77.67, and 72.71%, respectively, after 190 min. The kinetics and scavengers of the reactive species during the degradation were also investigated. It was found that the degradation of AR57 fitted first‐order kinetics and the OH^? radicals were the main species. During irradiation, the formation of OH^? free radicals was ascertained by photoluminescence studies using terephthalic acid as the probe molecule.     

Photodegradation of Rhodamine B on Sulfur Doped ZnO/TiO2 Nanocomposite Photocatalyst under Visible-light Irradiation

Sulfur doped ZnO/TiO₂ nanocomposite photocatalysts were synthesized by a facile sol‐gel method. The structure and properties of catalysts were characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), UV‐vis diffusive reflectance spectroscopy (DRS) and N₂ desorption‐adsorption isotherm. The XRD study showed that TiO₂ was anatase phase and there was no obvious difference in crystal composition of various S‐ZnO/TiO₂. The XPS study showed that the Zn element exists as ZnO and S atoms form SO^2?₄. The prepared samples had mesoporosity revealed by N₂ desorption‐adsorption isotherm result. The degradation of Rhodamine B dye under visible light irradiation was chosen as probe reaction to evaluate the photocatalytic activity of the ZnO/TiO₂ nanocomposite. The commercial TiO₂ photocatalyst (Degussa P25) was taken as standard photocatalyst to contrast the prepared different photocatalyst in current work. The improvement of the photocatalytic activity of S‐ZnO/TiO₂ composite photocatalyst can be attributed to the suitable energetic positions between ZnO and TiO₂, the acidity site caused by sulfur doping and the enlargement of the specific area. S‐3.0ZnO/TiO₂ exhibited the highest photocatalytic activity under visible light irradiation after Zn amount was optimized, which was 2.6 times higher than P25.     

Sonophotocatalytic treatment of diazinon using visible light‐driven Ce:Cu‐1,4‐BDOAH2 photocatalyst in a batch‐mode process: Response surface methodology and optimization

Cu–1,4‐benzenedioxyacetic acid (Cu‐1,4‐BDOAH₂) with a narrow band gap (2.52 eV) was synthesized and doped with Ce to afford Ce:Cu‐1,4‐BDOAH₂ as an efficient photocatalyst with narrower band gap (2.39 eV). The prepared Cu‐1,4‐BDOAH₂ and Ce:Cu‐1,4‐BDOAH₂ were characterized using Fourier transform infrared, energy‐dispersive X‐ray, diffuse reflectance spectroscopies, scanning electron microscopy and X‐ray diffraction. The sonophotocatalytic degradation of diazinon was carried out in a batch‐mode reactor using visible light‐driven Ce:Cu‐1,4‐BDOAH₂ photocatalyst as well as ultrasonic irradiation. The narrow band gap of the photocatalyst means that it can be activated under visible light illumination. The effects of operational parameters such as initial diazinon concentration (5–25 mg l^?1), pH (2–10), photocatalyst dosage (10–30 mg) and irradiation time (10–30 min) on the sonophotocatalytic degradation efficiency were investigated using central composite design under response surface methodology. The optimization process was studied using desirability function and the results indicated 99.8% degradation, which was obtained at optimum values of 25 mg l^?1, 6, 20 mg and 20 min for the initial concentration of diazinon, pH, photocatalyst dosage and irradiation time, respectively. Reusability experiments of Ce:Cu‐1,4‐BDOAH₂ photocatalyst showed that it is quite stable with excellent catalytic activity even after five cycles.     

Surface modification of carbonyl iron powders with silicone polymers in supercritical fluid to get higher dispersibility and higher thermal stability

The surface of carbonyl iron powder (CIP) was modified in supercritical fluid with silicone polymers containing reactive Si‐OCH₃ groups. Fourier‐transformed infrared spectroscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, and thermo gravimetric analysis were adopted to characterize CIP. The dispersibility of CIP in epoxy resin matrix was evaluated by castor oil absorption factor, dynamic viscosity, Mooney viscosity, and scanning electric micrograph. The electromagnetic reflectivity of the CIP‐filled epoxy resin coatings was also checked. It was confirmed that comparing with those treated at atmosphere, the supercritical treated CIP presented higher surface carbon content, higher dispersibility, higher thermal stability, and its original crystalline structure did not change greatly. Even though it experienced a high temperature and a high pressure (250 °C, 7.8 Mpa) during supercritical treatment, it was not oxidized, and its electromagnetic reflectivity did not decrease. Copyright © 2016 John Wiley & Sons, Ltd.     

Zinc oxide nanorod‐loaded activated carbon for ultrasound‐assisted adsorption of safranin O: Central composite design and genetic algorithm optimization

This paper focuses on the development of an effective methodology to obtain the optimum ultrasonic‐assisted removal of a dye, safranin O (SO), under optimum conditions that maximize the removal percentage, using ZnO nanorod‐loaded activated carbon (ZnO‐NRs‐AC) in aqueous solution. Central composite design coupled with genetic algorithm was used for parameter optimization. The effects of variables such as pH, initial dye concentration, mass of ZnO‐NRs‐AC and sonication time were studied. The interactive and main effects of these variables were evaluated using analysis of variance. The structural and physicochemical properties of the ZnO‐NRs‐AC adsorbent were investigated using field emission scanning electron microscopy and X‐ray diffraction. Adsorption equilibrium data were fitted well with the Langmuir isotherm and the maximum monolayer capacity was found to be 32.06 mg g^?1. Studies of the adsorption kinetics of the SO dye showed a rapid sorption dynamic with a ^pseudo‐second‐order kinetic model, suggesting a chemisorption mechanism.     

Zinc Oxide Nanoparticle‐modified Glassy Carbon Electrode as a Highly Sensitive Electrochemical Sensor for the Detection of Caffeine

Zinc oxide nanoparticles (ZnO NPs ) were prepared by a simple, convenient, and cost‐effective wet chemical method using the biopolymer starch. The prepared ZnO NPs were characterized by X‐ray diffraction (XRD ), scanning electron microscopy (SEM ), energy‐dispersive X‐ray (EDX ), Fourier transform infrared (FT‐IR ), and UV ‐visible spectroscopic techniques. The average crystallite size calculated from XRD data using the Debye–Scherer equation was found to be 15 nm. The electrochemical behavior of caffeine (CAF ) was studied using a glassy carbon electrode (GCE ) modified with zinc oxide nanoparticles by cyclic voltammetry (CV ) and differential pulse voltammetry (DPV ). Compared to unmodified GCE , ZnO NPs‐ modified GCE (ZnO NPs MGCE ) exhibited excellent electrocatalytic activity towards CAF oxidation, which was evident from the increase in the peak current and decrease in the peak potential. Electrochemical impedance study suggested that the charge‐transfer capacity of GCE was significantly enhanced by ZnO NPs . The linear response of the peak current on the concentrations of CAF was in the range 2–100 μM . The detection limit was found to be 0.038 μM. The proposed sensor was successfully employed for the determination of CAF in commercial beverage samples.     

Biochar as heterogeneous support for immobilization of Pd as efficient and reusable biocatalyst in C–C coupling reactions

Biochar is a stable and carbon‐rich solid which has a high density of carbonyl, hydroxyl and carboxylic acid functional groups on its surface. In this work, the surface of biochar nanoparticles (BNPs) was modified with 3‐choloropropyltrimtoxysilane and further 2‐(thiophen‐2‐yl)‐1H‐benzo[d]imidazole was anchored on its surface. Then, palladium nanoparticles were fabricated on the surface of the modified BNPs and further the catalytic application was studied as recyclable biocatalyst in carbon–carbon coupling reactions such as Suzuki–Miyaura and Heck–Mizoroki cross‐coupling reactions. The structure of the catalyst was characterized using scanning electron microscopy, transmission electron microscopy, energy‐dispersive X‐ray spectroscopy, thermogravimetric analysis, X‐ray diffraction and atomic absorption spectroscopy. The catalyst can be reused several times without a decrease in its catalytic efficiency. In addition to the several advantages reported, application of biochar as catalyst support for the first time is a major novelty of the present work.     

Performance of zwitterionic hydrophilic interaction LC for the determination of iodinated X‐ray contrast agents

This study compares the separation performance of a group of iodinated X‐ray contrast media on four different columns. The first three were two stationary phases (SPs) modified with C₁₈ and a polar‐embedded SP (polar amide group bonded to an alkyl chain), all of which worked under RP‐LC mode. The fourth was a zwitterionic sulphoalkylbetaine SP, working under the hydrophilic interaction LC (HILIC) mode. After the optimisation of the different parameters, the zwitterionic column displayed the best separation, which also overcomes the problems encountered when these analytes were separated under RP‐LC. Moreover, when HILIC is coupled to MS/MS, sensitivity is enhanced. However, when sewage samples were analysed by SPE followed by the optimal HILIC–MS/MS, the sensitivity of the method was affected due to the high matrix effect, which had to be solved by dilution of the extract. Finally, the method was preliminarily validated with sewage and the figures of merit were comparable to those of the SPE–RP‐LC–MS/MS.     

Synthesis,Characterization and Photocatalytic Activity of Mg‐Impregnated ZnO–SnO2 Coupled Nanoparticles

ZnO–SnO₂ nanoparticles were prepared by coprecipitation method; then Mg, with different molar ratios and calcination temperatures, was loaded on the coupled nanoparticles by impregnation method. The synthesized nanoparticles were characterized by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray spectroscopy (EDX), transmission electron microscopy (TEM), diffuse reflectance spectroscopy (DRS), and Brunauer–Emmett–Teller (BET) techniques. Based on XRD results, the ZnO–SnO₂ and Mg/ZnO–SnO₂ nanoparticles were made of ZnO and SnO₂ nanocrystallites. According to DRS spectra, the band gap energy value of 3.13 and 3.18 eV were obtained for ZnO–SnO₂ and Mg/ZnO–SnO₂ nanoparticles, respectively. BET analysis revealed a Type III isotherm with a microporous structure and surface area of 32.051 and 49.065 m² g^?1 for ZnO–SnO₂ and Mg/ZnO–SnO₂, respectively. Also, the spherical shape of nanocrystallites was deduced from TEM and FESEM images. The photocatalytic performance of pure ZnO–SnO₂ and Mg/ZnO–SnO₂ was analyzed in the photocatalytic removal of methyl orange (MO). The results indicated that Mg/ZnO–SnO₂ exhibited superior photocatalytic activity to bare ZnO–SnO₂ photocatalyst due to high surface area, increased MO adsorption and larger band gap energy. Maximum photocatalytic activity of Mg/ZnO–SnO₂ nanoparticles was obtained with 0.8 mol% Mg and calcination temperature of 350°C.     

Synthesis,characterization and photocatalytic application of TiO2/magnetic graphene for efficient photodegradation of crystal violet

A magnetized nano‐photocatalyst based on TiO₂/magnetic graphene was developed for efficient photodegradation of crystal violet (CV). Scanning electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy and elemental mapping were used to characterize the prepared magnetic nano‐photocatalyst. The photocatalytic activity of the synthesized magnetic nano‐photocatalyst was evaluated using the decomposition of CV as a model organic pollutant under UV light irradiation. The obtained results showed that TiO₂/magnetic graphene exhibited much higher photocatalytic performance than bare TiO₂. Incorporation of graphene enhanced the activity of the prepared magnetic nano‐photocatalyst. TiO₂/magnetic graphene can be easily separated from an aqueous solution by applying an external magnetic field. Effects of pH, magnetized nano‐photocatalyst dosage, UV light irradiation time, H₂O₂ amount and initial concentration of dye on the photodegradation efficiency were evaluated and optimized. Efficient photodegradation (>98%) of the selected dye under optimized conditions using the synthesized nano‐photocatalyst under UV light irradiation was achieved in 25 min. The prepared magnetic nano‐photocatalyst can be used in a wide pH range (4–10) for degradation of CV. The effects of scavengers, namely methanol (OH^? scavenger), p‐benzoquinone (O₂^?? scavenger) and disodium ethylenediaminetetraacetate (hole scavenger), on CV photodegradation were investigated.     

Improving the Photocatalytic Activity of Modified Anatase TiO2 with Different Concentrations of Aluminum under Visible Light: Mechanistic Survey

Visible light‐driven Al‐doped TiO₂ with different aluminum contents (2, 5 and 10 mol%) were synthesized via a facile sol–gel method. Fourier transform infrared (FTIR), UV‐visible diffuse reflectance, energy dispersive X‐ray (EDX) spectroscopy as well as X‐ray diffraction (XRD), X‐ray fluorescence (XRF) and scanning electron microscopy (SEM) methods were used for the characterization of the obtained nanoparticles. The photocatalytic performance of the samples was evaluated by the degradation of rhodamine B (RhB) under visible light irradiation. The yield of the degradation RhB was estimated to be 71%, 89%, 65% and 56%, for the bare TiO₂, 2%, 5% and 10% Al‐doped TiO₂, respectively. It was found that 2 mol% of Al‐doped TiO₂ shows the best photocatalytic performance. In low concentration of dopant, separation of photogenerated electron–hole pairs promoted, and subsequently, the degradation efficiency increased. It was proposed that the degradation of RhB by 2 mol% Al‐doped TiO₂ photocatalyst follows both N‐deethylation and chromophore cleavage mechanisms, while the N‐deethylation still predominated over cleavage of dye chromophore structure. The key role of hydroxyl radicals in RhB degradation was verified by the effects of scavengers. In addition, the photocatalyst can be reused for three runs without any significant loss of its catalytic activity.     

Facile Electrospinning of CeO2/Bi2WO6 Heterostructured Nanofibers with Excellent Visible‐light‐driven Photocatalytic Performance

One‐dimensional (1D) CeO₂/Bi₂WO₆ heterostructured nanofibers with a diameter of about 300 nm were successfully synthesized by using a straightforward strategy combining an electrospinning technique with a sintering process. The acquired products were characterized by thermogravimetric and differential scanning calorimetric (TG‐DSC), Fourier transform infrared (FT‐IR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area measurements, and UV/Vis spectroscopy. The obtained CeO₂/Bi₂WO₆ heterostructured nanofibers exhibited an excellent photocatalytic property for the degradation of Rhodamine B (RhB) dye driven by visible light due to the promoted separation of photoelectrons and holes and the large contact area between the photocatalyst and organic pollutant.     

BiOCl/UiO‐66 composite with enhanced performance for photo‐assisted degradation of dye from water

Semiconductor‐based photocatalysis is an environmental friendly and cost‐effective technique for water treatment. Due to their unique properties, metal–organic frameworks (MOFs) are considered as ideal platform to develop composite photocatalyst. In this study, Bismuth oxychloride (BiOCl) was first attempt to be incorporated with highly stable MOFs, UiO‐66(Zr) by hydrothermal reaction. Different characterization methods including X‐ray diffraction, Scanning electron microscopy, Fourier transform infrared spectroscope, X‐ray photoelectron spectroscopy had been used to prove the successful synthesis of composite photocatalyst. The resultant BiOCl/UiO‐66 composite showed higher photodegradation performance of Rhodamine B (RhB) under ultraviolet and visible light irradiation than that of pristine materials and their mechanically mixed sample. In addition, the composite exhibited good structural stability and reusability. The photocatalytic mechanism of RhB degradation over the composite under visible light proceeded via a photosensitization process. A better adsorptivity of RhB and effective electron transfer within the hybrid material might be responsible for the enhanced photocatalytic performance.     

Effective synthesis of nanoscale anatase TiO2 single crystals using activated carbon template to enhance the photodegradation of crystal violet

Nanoscale anatase TiO₂ single crystals were successfully synthesized using three kinds of activated carbon (AC) templates through a simple sol–gel method. The optimal photocatalyst (T‐WOAC) was obtained using wood‐based AC template. X‐ray diffraction, transmission electron microscopy and Brunauer–Emmett–Teller analyses revealed that T‐WOAC possessed a small crystallite size of 8.7 nm and a clear mesoporous structure. The photocatalytic properties of samples were then evaluated through photodegradation of crystal violet (CV). Results implied that the photocatalysts prepared using the AC templates exhibited superior photocatalytic activity to that of the original TiO₂. This enhancement may be due to the small crystallite size, large specific surface area and pore volume of the catalysts prepared with ACs. T‐WOAC showed high photocatalytic activity, CV degradation of 99.01% after 120 min of irradiation and k = 0.03914 min^?1, which is 3.9 times higher than that of the original TiO₂ (k = 0.00994 min^?1). This result can be mainly attributed to the application of WOAC with moderate specific surface area and pore volume to produce T‐WOAC. Alkaline conditions benefitted the photodegradation of CV over photocatalysts. This work proposes a possible degradation mechanism of CV and indicates that the fabricated photocatalysts can be used to effectively remove CV from aqueous solutions.     

Synthesis and Characterization of PANI/ZnO Nanocomposites

This paper presents our results on the successful fabrication of HCl‐doped polyaniline (PANI)/ZnO nanocomposites via an electrochemical synthesis route. Different weight percents of ZnO nanoparticles were uniformly dispersed in the PANI matrix. The interaction between the dispersed ZnO nanoparticle and PANI was studied using X‐ray diffraction, ultraviolet–visible absorption spectroscopy, photoluminescence (PL) spectroscopy, X‐ray photoelectron spectroscopy, atomic force microscopy, thermogravimetry, and transmission electron microscopy. It is shown that the doping state of the PANI/ZnO nanocomposite is highly improved as compared to that of PANI. The dispersed PANI/ZnO nanocomposites exhibit enhanced PL behavior and thermal stability.     

Evaluating the efficiency of the GO‐Fe3O4/TiO2 mesoporous photocatalyst for degradation of chlorpyrifos pesticide under visible light irradiation

In this work, the photocatalytic activity of the synthesized graphene oxide (GO)‐Fe₃O₄/TiO₂ mesoporous photocatalysts was evaluated using chlorpyrifos (CP) as a contaminant. The nano‐photocatalyst was characterized by X‐ray diffraction, field emission scanning electron microscopy with energy‐dispersive X‐ray spectroscopy, transmission electron microscopy, and specific surface area by the Brunauer–Emmett–Teller method. Using visible light, the GO‐Fe₃O₄/TiO₂ mesoporous photocatalyst was investigated on the degradation of CP pesticide. The GO‐Fe₃O₄/TiO₂ photocatalyst displayed a good photocatalytic activity, which was achieving 97% of CP degradation after 60 min. Finally, experiments were performed to evaluate GO‐Fe₃O₄/TiO₂ mesoporous nanocatalyst activity on repeated applications; after several uses, its photocatalytic activity was retained, which indicated stability.     

以偏钛酸为原料制备高效负载型纳米TiO2/活性炭光催化剂

以颗粒活性炭(AC)为载体, 偏钛酸为钛源, 采用浸渍-水热法制备负载型TiO2光催化剂, 在300～800 ℃下热解处理. 利用X射线衍射、扫描电镜、拉曼光谱和氮气吸附对催化剂样品进行了表征. 以甲基橙(MO)降解为模型反应, 对负载型TiO2光催化性能进行评价. 结果表明, 经600 ℃焙烧的样品具有最佳光催化性能, 为锐钛矿晶型, 负载于活性炭上的TiO2是由30～50 nm的球型颗粒组成. 负载型TiO2/AC光催化剂的光催化活性高于相同方法制备TiO2和AC混合物及商业化产品Degussa P25与活性炭混合物, 光降解反应符合一级反应动力学方程. 催化剂重复使用5次其光催化活性基本保持不变.