Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006     

Poly(styrene‐b‐isobutylene) multiarm star‐block copolymers

Multiarm star‐branched polymers based on poly(styrene‐b‐isobutylene) (PS‐PIB) block copolymer arms were synthesized under controlled/living cationic polymerization conditions using the 2‐chloro‐2‐propylbenzene (CCl)/TiCl₄/pyridine (Py) initiating system and divinylbenzene (DVB) as gel‐core‐forming comonomer. To optimize the timing of isobutylene (IB) addition to living PS⊕, the kinetics of styrene (St) polymerization at −80°C were measured in both 60 : 40 (v : v) methyl cyclohexane (MCHx) : MeCl and 60 : 40 hexane : MeCl cosolvents. For either cosolvent system, it was found that the polymerizations followed first‐order kinetics with respect to the monomer and the number of actively growing chains remained invariant. The rate of polymerization was slower in MCHx : MeCl (k_app = 2.5 × 10⁻³ s⁻¹) compared with hexane : MeCl (k_app = 5.6 × 10⁻³ s⁻¹) ([CCl]_o = [TiCl₄]/15 = 3.64 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M). Intermolecular alkylation reactions were observed at [St]_o = 0.93M but could be suppressed by avoiding very high St conversion and by setting [St]_o ≤ 0.35M. For St polymerization, k_app = 1.1 × 10⁻³ s⁻¹ ([CCl]_o = [TiCl₄]/15 = 1.82 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M); this was significantly higher than that observed for IB polymerization (k_app = 3.0 × 10⁻⁴ s⁻¹; [CCl]_o = [Py] = [TiCl₄]/15 = 1.86 × 10⁻³M; [IB]_o = 1.0M). Blocking efficiencies were higher in hexane : MeCl compared with MCHx : MeCl cosolvent system. Star formation was faster with PS‐PIB arms compared with PIB homopolymer arms under similar conditions. Using [DVB] = 5.6 × 10⁻²M = 10 times chain end concentration, 92% of PS‐PIB arms (M_n,PS = 2600 and M_n,PIB = 13,400 g/mol) were linked within 1 h at −80°C with negligible star–star coupling. It was difficult to achieve complete linking of all the arms prior to the onset of star–star coupling. Apparently, the presence of the St block allows the PS‐PIB block copolymer arms to be incorporated into growing star polymers by an additional mechanism, namely, electrophilic aromatic substitution (EAS), which leads to increased rates of star formation and greater tendency toward star–star coupling. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1629–1641, 1999     

Synthesis of miktoarm star amphiphilic block copolymers via combination of NMRP and ATRP and investigation on self‐assembly behaviors

The novel trifunctional initiator, 1‐(4‐methyleneoxy‐2,2,6,6‐tetramethylpip‐eridinoxyl)‐3,5‐bi(bromomethyl)‐2,4,6‐trimethylbenzene (TEMPO‐2Br), was successfully synthesized and used to prepare the miktoarm star amphiphilic poly(styrene)‐(poly(N‐isopropylacrylamide))₂ (PS(PNIPAAM)₂) via combination of atom transfer radical polymerization (ATRP) and nitroxide‐mediated radical polymerization (NMRP) techniques. Furthermore, the star amphiphilic block copolymer, poly (styrene)‐(poly(N‐isopropylacrylamide‐b‐4‐vinylpyridine))₂ (PS(PNIPAAM‐b‐P4VP)₂), was also prepared using PS(PNIPAAM)₂ as the macroinitiator and 4‐vinylpyridine as the second monomer by ATRP method. The obtained polymers were well‐defined with narrow molecular weight distributions (M_w/M_n ≤ 1.29). Meanwhile, the self‐assembly behaviors of the miktoarm amphiphilic block copolymers, PS(PNIPAAM)₂ and PS(PNIPAAM‐b‐P4VP)₂, were also investigated. Interestingly, the aggregate morphology changed from sphere‐shaped micelles (4.7 < pH < 3.0) to a mixture of spheres and rods (1.0 < pH < 3.0), and rod‐shaped nanorods formed when pH value was below 1.0. The LCST of PS(PNIPAAM)₂ (pH = 7) was about 31 °C and the LCST of PS(PNIPAAM‐b‐P4VP)₂ was about 35 °C (pH = 3). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6304–6315, 2009     

Novel organosoluble polynorbornene bearing a polar,pendant, ester‐bridged epoxy group via living ring‐opening metathesis polymerization

A novel organosoluble polynorbornene bearing a polar, pendant, ester‐bridged epoxy group [poly(oxiran‐2‐ylmethyl 2‐methylbicyclo[2.2.1]hept‐5‐ene‐2‐carboxylate) (polyOMMC)] was prepared via the living ring‐opening metathesis polymerization (ROMP) of active norbornenes with a Ru catalyst. PolyOMMC exhibited excellent solubility in a variety of solvents. The number‐average molecular weight of polyOMMC linearly increased with the [M]/[I] ratio (where [M] is the monomer concentration and [I] is the initiator concentration), and a narrow polydispersity of 1.09–1.19 was observed; this was considered a living polymerization. When ROMP of oxiran‐2‐ylmethyl 2‐methylbicyclo[2.2.1]hept‐5‐ene‐2‐carboxylate with [M]/[I] = 350 was carried out at 30 °C in CH₂Cl₂, the number‐average molecular weight (7.01 × 10⁴; polydispersity index = 1.07) was close to the calculated molecular weight (7.28 × 10⁴), and a diblock copolymer was observed after the addition of another monomer ([M]/[I] = 350) with an increase in the number‐average molecular weight (1.60 × 10⁵; polydispersity index = 1.11), which was close to the calculated molecular weight (1.61 × 10⁵). The modified polynorbornenes retained good solubility in methylene chloride, tetrahydrofuran, dimethyl sulfoxide, dimethylformamide, N,N‐dimethylacetamide, and N‐methyl‐2‐pyrrdione. High‐performance polynorbornenes with active epoxy groups could be designed with great potential for applications in photoresists, UV curing, and elastomers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4428–4434, 2006     

Preparation of aromatic polyimides highly soluble in conventional solvents

Several highly soluble polyimides were synthesized from various aromatic tetracarboxylic dianhydrides and an aromatic diamine containing tert‐butyl pendent groups [4,4′‐methylenebis(2‐tert‐butylaniline)]. All the polyimides showed excellent solubility in common solvents such as chloroform, tetrahydrofuran, and dioxane at room temperature. The number‐average molecular weight ranged from 3.6 × 10⁴ to 1.3 × 10⁵ according to gel permeation chromatography relative to a polystyrene standard, and the polydispersity index was between 1.9 and 2.5. The glass‐transition temperatures of the resulting polyimides ranged from 213 to 325 °C, as measured by differential scanning calorimetry, and little weight loss was observed up to 450 °C in N₂ by thermogravimetric analysis. These experimental data indicated that the tert‐butyl pendent groups reduced the interactions among polymer chains to improve their solubility in organic solvents without the loss of thermal stability. Transparent and flexible films of these polyimides were obtained via casting from solution. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 229–234, 2002     

Influence of nitroxide structure on the 2,5‐ and 2,6‐spirodicyclohexyl substituted cyclic nitroxide‐mediated free‐radical polymerization of styrene

The 2,6‐spirodicyclohexyl substituted nitroxide, cyclohexane‐1‐spiro‐2′‐(3′,5′‐dioxo‐4′‐benzylpiperazine‐1′‐oxyl)‐6′‐spiro‐1″‐cyclohexane (BODAZ), was investigated as a mediator for controlled/living free‐radical polymerization of styrene. The values of the number‐average molecular weight increased linearly with conversion, but the polydispersities were higher than for the corresponding 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (TEMPO) and 2,5‐bis(spirocyclohexyl)‐3‐benzylimidazolidin‐4‐one‐1‐oxyl (NO88Bn) mediated systems at approximately 2.2 and 1.6 at 100 and 120 °C, respectively. These results were reflected in the rate coefficients obtained by electron spin resonance spectroscopy; at 120 °C, the values of the rate coefficients for polystyrene‐BODAZ alkoxyamine dissociation (k_d), combination of BODAZ and propagating radicals (k_c), and the equilibrium constant (K) were 1.60 × 10^?5 s^?1, 5.19 × 10⁶ M^?1 s^?1, and 3.08 × 10^?12 M, respectively. The value of k_d was approximately one and two orders of magnitude lower, and that of K was approximately 20 and 7 times lower than for the NO88Bn and TEMPO adducts. These results are explained in terms of X‐ray crystal structures of BODAZ and NO88Bn; the six‐membered ring of BODAZ deviates significantly from planarity as compared to the planar five‐membered ring of NO88Bn and possesses a benzyl substituent oriented away from the nitroxyl group leading to a seemingly more exposed oxyl group, which resulted in a higher k_c and a lower k_d than NO88Bn. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3892–3900, 2003     

Rare‐earth‐metal‐initiated polymerizations of (meth)acrylates and block copolymerizations of olefins with polar monomers

The organo‐rare‐earth‐metal‐initiated living polymerization of methyl methacrylate (MMA) was first discovered in 1992 with (C₅Me₅)₂LnR (where R is H or Me and Ln is Sm, Yb, Y, or La) as an initiator. These polymerizations provided highly syndiotactic (>96%) poly(methyl methacrylate) (PMMA) with a high number‐average molecular weight (M_n > 1000 × 10³) and a very narrow molecular weight distribution [weight‐average molecular weight/number‐average molecular weight (M_w/M_n) < 1.04] quantitatively in a short period. Bridged rare‐earth‐metallocene derivatives were used to perform the block copolymerization of ethylene or 1‐hexene with MMA, methyl acrylate, cyclic carbonate, or ?‐caprolactone in a voluntary ratio. Highly isotactic (97%), monodisperse, high molecular weight (M_n > 500 × 10³, M_w/M_n < 1.1) PMMA was first obtained in 1998 with [(Me₃Si)₃C]₂Yb. Stereocomplexes prepared by the mixing of the resulting syndiotactic and isotactic PMMA revealed improved physical properties. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 1955–1959, 2001     

Self-bonding in an amorphous polymer below the glass transition: A T-peel test investigation

Films of amorphous polystyrene (PS) with a weight-average molecular weight (M_w) of 225 × 10³ g/mol were bonded in a T-peel test geometry, and the fracture energy (G) of a PS/PS interface was measured at the ambient temperature as a function of the healing time (t_h) and healing temperature (T_h). G was found to develop with (t_h)^1/2 at T_h = T_g-bulk − 33 °C (where T_g-bulk is the glass-transition temperature of the bulk sample), and log G was found to develop with 1/T_h at T_g-bulk − 43 °C ≤ T_h ≤ T_g-bulk − 23 °C. The smallest measured value of G = 1.4 J/m² was at least one order of magnitude larger than the work of adhesion required to reversibly separate the PS surfaces. These three observations indicated that the development of G at the PS/PS interface in the temperature range investigated (<T_g-bulk) was controlled by the diffusion of chain segments feasible above the glass-transition temperature of the interfacial layer, in agreement with our previous findings for fracture stress development at several polymer/polymer interfaces well below T_g-bulk. Close values of G = 8–9 J/m² were measured for the symmetric interfaces of polydisperse PS [M_w = 225 × 10³, weight-average molecular weight/number-average molecular weight (M_w/M_n) = 3] and monodisperse PS (M_w = 200 × 10³, M_w/M_n = 1.04) after healing at T_h = T_g-bulk − 33 °C for 24 h. This implies that the self-bonding of high-molecular-weight PS at such relatively low temperatures is not governed by polydispersity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1861–1867, 2004     

Direct spincasting of polystyrene thin films onto poly(methyl methacrylate)

The low vapor pressure solvent 1‐chloropentane was used to directly spincast polystyrene (PS) films onto poly(methyl methacrylate) (PMMA) with smooth surfaces and sharp interfaces. Interface roughness after removal of the PS layer with cyclohexane was determined with scanning force microscopy to be <1 nm. Dynamic secondary mass spectroscopy revealed an interfacial width below the resolution limit of ～10 nm. Large area bilayers with smooth surfaces could be created. In addition, direct spincasting with 1‐chloropentane allows the production of thin PS films (<15 nm) and films of low molecular weight (<5 kDa) PS, all of which would be impossible to produce for this important model system by the traditional water‐transfer method. 1‐chloropentane was confirmed to be a sufficiently selective solvent for PS by measuring the Flory–Huggins χ parameters of 1‐chloropentane with PS and PMMA, respectively, with inverse gas chromatography. In the search for a suitable selective solvent, the authors have also examined the role of vapor pressure in spin casting smooth films over a wider molecular weight (4.3–190 kDa) and thickness range (～5–500 nm) than previously reported. Only solvents with low vapor pressure produced high quality PS films. Methylcyclohexene can also be used to produce excellent, directly cast PS/PMMA bilayers, but with a smaller molecular weight and thickness window compared with 1‐chloropentane. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3234–3244, 2006     

Aggregation behavior of polystyrene‐b‐poly(ethylene/butylene)‐b‐polystyrene triblock copolymer in N‐methylpyrrolidone

Solution property of hydrogenated polystyrene‐b‐poly(ethylene/butylene)‐b‐polystyrene triblock copolymer (SEBS copolymer) was studied by using static light scattering and dynamic light scattering for cyclohexane and N‐methylpyrrolidone (NMP) solutions. From the values of dimensionless parameters ρ, defined as the ratio of radius of gyration 〈S²〉^1/2 to hydrodynamic radius R_H, and solubility parameters, SEBS copolymer proved to exist as single chain close to random coil in nonpolar cyclohexane, whereas aggregate into the core‐shell micelle consisting of poly(ethylene/butylene) (PEB) core surrounded by PS shell in polar NMP. The core‐shell micelle formed in NMP is composed of 65 polymer chains, having three times larger average chain density (d = 0.12 g cm^?3) than a single polymer chain (d = 0.04 g cm^?3) in cyclohexane. The comparison with the aggregation behaviors in other solvents demonstrated that the aggregate compactness of the copolymer depended largely on solvent polarity, resulting in formation of the highly dense PEB core (R_c = 4.5 nm) and the thick PS shell (ΔR = 22.9 nm) in high‐polar NMP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 588–594, 2010     

Conformation of poly(dimethyl siloxane) and polystyrene in solution measured by polarized Raman scattering

Depolarization ratios ρ have been measured over ranges of temperature T and molecular weight M for polystyrene (PS) dissolved in cyclohexane (1002 cm^?1 Raman band) and for poly(dimethyl siloxane) (PDMS) dissolved in benzene (2907 cm^?1 Raman band). The ranges in the case of PS are 15 < T < 65°C and 2 × 10³ < M < 4 × 10⁵ and in the case of PDMS are ?3 < T < 60°C and M = 10⁴. Measurements were also made of PDMS radii of gyration using conventional light scattering. The results are interpreted in terms of a theory connecting rotational isomeric populations with polymer extension. In the case of PDMS, an experimental value of the proportionality constant for trans isomers (D₂ = ?3.9 ± 0.9) is deduced. This is closer to the theoretical value than previous estimates but there is still some discrepancy. In the case of PS the isomeric changes resulting from extension are independent of M for M > 10⁴. Deviations are observed for lower M.     

Mechanism and kinetics of the imidazolidinone nitroxide‐mediated free‐radical polymerization of styrene

Styrene radical polymerizations mediated by the imidazolidinone nitroxides 2,5‐bis(spirocyclohexyl)‐3‐methylimidazolidin‐4‐one‐1‐oxyl (NO88Me) and 2,5‐bis(spirocyclohexyl)‐3‐benzylimidazolidin‐4‐one‐1‐oxyl (NO88Bn) were investigated. Polymeric alkoxyamine (PS‐NO88Bn)‐initiated systems exhibited controlled/living characteristics at 100–120 °C but not at 80 °C. All systems exhibited rates of polymerization similar to those of thermal polymerization, with the exception of the PS‐NO88Bn system at 80 °C, which polymerized twice as quickly. The dissociation rate constants (k_d) for the PS‐NO88Me and PS‐NO88Bn coupling products were determined by electron spin resonance at 50–100 °C. The equilibrium constants were estimated to be 9.01 × 10^?11 and 6.47 × 10^?11 mol L^?1 at 120 °C for NO88Me and NO88Bn, respectively, resulting in the combination rate constants (k_c) 2.77 × 10⁶ (NO88Me) and 2.07 × 10⁶ L mol^?1 s^?1 (NO88Bn). The similar polymerization results and kinetic parameters for NO88Me and NO88Bn indicated the absence of any 3‐N‐transannular effect by the benzyl substituent relative to the methyl substituent. The values of k_d and k_c were 4–8 and 25–33 times lower, respectively, than the reported values for PS‐TEMPO at 120 °C, indicating that the 2,5‐spirodicyclohexyl rings have a more profound effect on the combination reaction rather than the dissociation reaction. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 327–334, 2003     

Synthesis,structure, and properties of poly[1‐(trimethylgermyl)‐1‐propyne]

Polymerization of 1‐(trimethylgermyl)‐1‐propyne (TMGP) with TaCl₅ and NbCl₅ produced a colorless polymer in high yields, whose molecular weight reached about 3 × 10⁵–14 × 10⁵. The molecular weight distribution of the poly(TMGP) with NbCl₅ in cyclohexane was somewhat narrow (M_w /M_n = ∼1.54). The TaCl₅‐based poly(TMGP) dissolved in toluene, chloroform, cyclohexane, carbon disulfide, carbon tetrachloride, tetrahydrofuran, hexane, and so forth; the NbCl₅‐based polymer was less soluble and did not dissolve in hexane, despite its lower molecular weight. The cis contents of the NbCl₅‐ and TaCl₅‐based poly(TMGP)s determined by ¹³C NMR were 67 ± 5 and 28 ± 3%, respectively. The onset temperature of the weight loss of poly(TMGP) in air was 350 °C, indicating fair thermal stability. The oxygen permeability coefficient (P) of poly(TMGP) at 25 °C was 7800 barrer after the methanol conditioning, and the permeability was fairly stable to aging. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2964–2969, 2000     

Dendrimers as scaffolds for multifunctional reversible addition–fragmentation chain transfer agents: Syntheses and polymerization

The synthesis and characterization of novel first‐ and second‐generation true dendritic reversible addition–fragmentation chain transfer (RAFT) agents carrying 6 or 12 pendant 3‐benzylsulfanylthiocarbonylsulfanylpropionic acid RAFT end groups with Z‐group architecture based on 1,1,1‐hydroxyphenyl ethane and trimethylolpropane cores are described in detail. The multifunctional dendritic RAFT agents have been used to prepare star polymers of poly(butyl acrylate) (PBA) and polystyrene (PS) of narrow polydispersities (1.4 < polydispersity index < 1.1 for PBA and 1.5 < polydispersity index < 1.3 for PS) via bulk free‐radical polymerization at 60 °C. The novel dendrimer‐based multifunctional RAFT agents effect an efficient living polymerization process, as evidenced by the linear evolution of the number‐average molecular weight (M_n) with the monomer–polymer conversion, yielding star polymers with molecular weights of up to M_n = 160,000 g mol^?1 for PBA (based on a linear PBA calibration) and up to M_n = 70,000 g mol^?1 for PS (based on a linear PS calibration). A structural change in the chemical nature of the dendritic core (i.e., 1,1,1‐hydroxyphenyl ethane vs trimethylolpropane) has no influence on the observed molecular weight distributions. The star‐shaped structure of the generated polymers has been confirmed through the cleavage of the pendant arms off the core of the star‐shaped polymeric materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5877–5890, 2004     

Polar,functionalized diene‐based materials. V. Free‐radical polymerization of 2‐[(N‐benzyl‐n‐methylamino)methyl]‐1,3‐butadiene and copolymerization with styrene

2‐[(N‐Benzyl‐N‐methylamino)methyl]‐1,3‐butadiene (BMAMBD), the first asymmetric tertiary amino‐containing diene‐based monomer, was synthesized by sulfone chemistry and a nickel‐catalyzed Grignard coupling reaction in high purity and good yield. The bulk and solution free‐radical polymerizations of this monomer were studied. Traditional bulk free‐radical polymerization kinetics were observed, giving polymers with 〈M_n〉 values of 21 × 10³ to 48 × 10³ g/mol (where M_n is the number‐average molecular weight) and polydispersity indices near 1.5. In solution polymerization, polymers with higher molecular weights were obtained in cyclohexane than in tetrahydrofuran (THF) because of the higher chain transfer to the solvent. The chain‐transfer constants calculated for cyclohexane and THF were 1.97 × 10^?3 and 5.77 × 10^?3, respectively. To further tailor polymer properties, we also completed copolymerization studies with styrene. Kinetic studies showed that BMAMBD incorporated into the polymer chain at a faster rate than styrene. With the Mayo–Lewis equation, the monomer reactivity ratios of BMAMBD and styrene at 75 °C were determined to be 2.6 ± 0.3 and 0.28 ± 0.02, respectively. Altering the composition of BMAMBD in the copolymer from 17 to 93% caused the glass‐transition temperature of the resulting copolymer to decrease from 64 to ?7 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3227–3238, 2001     

Synthesis of miktoarm star and miktoarm star block copolymers via a combination of atom transfer radical polymerization and stable free‐radical polymerization

A trifunctional initiator, 2‐phenyl‐2‐[(2,2,6,6‐tetramethyl)‐1‐piperidinyloxy] ethyl 2,2‐bis[methyl(2‐bromopropionato)] propionate, was synthesized and used for the synthesis of miktoarm star AB₂ and miktoarm star block AB₂C₂ copolymers via a combination of stable free‐radical polymerization (SFRP) and atom transfer radical polymerization (ATRP) in a two‐step or three‐step reaction sequence, respectively. In the first step, a polystyrene (PSt) macroinitiator with dual ω‐bromo functionality was obtained by SFRP of styrene (St) in bulk at 125 °C. Next, this PSt precursor was used as a macroinitiator for ATRP of tert‐butyl acrylate (tBA) in the presence of Cu(I)Br and pentamethyldiethylenetriamine at 80 °C, affording miktoarm star (PSt)(PtBA)₂ [where PtBA is poly(tert‐butyl acrylate)]. In the third step, the obtained St(tBA)₂ macroinitiator with two terminal bromine groups was further polymerized with methyl methacrylate by ATRP, and this resulted in (PSt)(PtBA)₂(PMMA)₂‐type miktoarm star block copolymer [where PMMA is poly(methyl methacrylate)] with a controlled molecular weight and a moderate polydispersity (weight‐average molecular weight/number‐average molecular weight < 1.38). All polymers were characterized by gel permeation chromatography and ¹H NMR. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2542–2548, 2003     

Ni(II) and Pd(II) complexes bearing benzocyclohexane–ketoarylimine for copolymerization of norbornene with 5‐norbornene‐2‐carboxylic ester

A serial of late transition metal complexes, which bearing Benzocyclohexane–ketoarylimine ligand and named as Mt(benzocyclohexane–ketoarylimino)₂ {Mt(bchkai)₂: Mt=Ni or Pd; bchkai=C₁₀H₈(O)CN(Ar)CH₃; Ar=naphthyl or fluoryl}, have been synthesized and characterized. The molecular structures of the ligands and nickel complex have been confirmed by X‐ray single‐crystal analyses. The nickel complexes exhibited very high activity up to 2.7 × 10⁵ g_polymer/mol_Ni·h and palladium complexes showed high activity up to 2.3 × 10⁵ g_polymer/mol_Pd·h for norbornene (NB) homo‐polymerization with tris(pentafluorophenyl)borane as cocatalyst. The four complexes were effective for copolymerization of NB and 5‐norbornene‐2‐carboxylic acid methyl ester (NB‐COOCH₃) in relatively high activities (0.1–2.4 × 10⁵ g_polymer/mol_Mt·h) and produced the addition‐type copolymers with relatively high molecular weights (0.5 × 10⁵–1.2 × 10⁵ g/mol) as well as narrow molecular weight distributions (PDI < 2 for all polymers). Influences of the metals and comonomer feed content on the polymerization activity as well as on the incorporation rates (20.9–42.6%) were investigated. The achieved NB/NB‐COOCH₃ copolymers were confirmed to be noncrystalline, exhibited good thermal stability (T_d > 400°C) and showed good solubility in common organic solvents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and properties of poly(phenylacetylenes) having two polar groups or one cyclic polar group on the phenyl ring

Phenylacetylene (PA) derivatives having two polar groups (ester, 2a – d ; amide, 4) or one cyclic polar group (imide, 5a – c ) were polymerized using (nbd)Rh⁺[(η⁶‐C₆H₅)B^?(C₆H₅)₃] catalyst to afford high molecular weight polymers (～1 × 10⁶ – 4 × 10⁶). The hydrolysis of ester‐containing poly(PA), poly( 2a) , provided poly(3,4‐dicarboxyPA) [poly ( 3 )], which could not be obtained directly by the polymerization of the corresponding monomer. The solubility properties of the present polymers were different from those of poly(PA) having no polar group; that is, poly( 2a )–poly( 2d ) dissolved in ethyl acetate and poly( 4 ) dissolved in N,N‐dimethylformamide, while poly(PA) was insoluble in such solvents. Ester‐group‐containing polymers [poly( 2a )–poly( 2d )] afforded free‐standing membranes by casting from THF solutions. The membrane of poly( 2a ) showed high carbon dioxide permselectivity against nitrogen (PCO₂/PN₂ = 62). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5943–5953, 2006     

Hyperbranched polymers as scaffolds for multifunctional reversible addition–fragmentation chain‐transfer agents: A route to polystyrene‐core‐polyesters and polystyrene‐block‐poly(butyl acrylate)‐core‐polyesters

Polydisperse hyperbranched polyesters were modified for use as novel multifunctional reversible addition–fragmentation chain‐transfer (RAFT) agents. The polyester‐core‐based RAFT agents were subsequently employed to synthesize star polymers of n‐butyl acrylate and styrene with low polydispersity (polydispersity index < 1.3) in a living free‐radical process. Although the polyester‐core‐based RAFT agent mediated polymerization of n‐butyl acrylate displayed a linear evolution of the number‐average molecular weight (M_n) up to high monomer conversions (>70%) and molecular weights [M_n > 140,000 g mol^?1, linear poly(methyl methacrylate) equivalents)], the corresponding styrene‐based system reached a maximum molecular weight at low conversions (≈30%, M_n = 45,500 g mol^?1, linear polystyrene equivalents). The resulting star polymers were subsequently used as platforms for the preparation of star block copolymers of styrene and n‐butyl acrylate with a polyester core with low polydispersities (polydispersity index < 1.25). The generated polystyrene‐based star polymers were successfully cast into highly regular honeycomb‐structured microarrays. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3847–3861, 2003     

Hydrodynamic properties of A8B8 type miktoarm (Vergina) stars

The dilute solution properties of three (PS)₈(PI)₈ miktoarm (Vergina) stars were investigated by viscometry and dynamic light scattering in toluene and tetrahydrofuran (THF) (common good solvents), cyclohexane at 34.5°C (theta solvent for PS and good for PI) and dioxane at 34°C (theta solvent for PI and good for PS). Experimental intrinsic viscosity [η] and hydrodynamic radii, R_h, values in all solvents were larger for the miktoarm stars in comparison to the calculated ones using a simple model which describes the size of the copolymers as a weighted average of the sizes of the homopolymer stars with the same total molecular weight and number of arms as the copolymer. This expansion is discussed on the basis of the increased number of heterocontacts, the topological constrains imposed by the common junction point in this highly branched miktoarm architecture and the asymmetry in molecular weights of the different kinds of arms. The conformation adopted in dilute solutions can explain, to some extent, the morphological results obtained on the same materials. The ratios of viscometric to hydrodynamic radii are consistent with previous investigations on linear and star polymers and in accord with the hard sphere model. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1329–1335, 1999