Rate constants for the gas‐phase reactions of chlorine atoms with 1,4‐cyclohexadiene and 1,5‐cyclooctadiene at 298 K

Rate constants for the reactions of Cl atoms with two cyclic dienes, 1,4‐cyclohexadiene and 1,5‐cyclooctadiene, have been determined, at 298 K and 800 Torr of N₂, using the relative rate method, with n‐hexane and 1‐butene as reference molecules. The concentrations of the organics are followed by gas chromatographic analysis. The ratios of the rate constants of reactions of Cl atoms with 1,4‐cyclohexadiene and 1,5‐cyclooctadiene to that with n‐hexane are measured to be 1.29 ± 0.06 and 2.19 ± 0.32, respectively. The corresponding ratios with respect to 1‐butene are 1.50 ± 0.16 and 2.36 ± 0.38. The absolute values of the rate constants of the reaction of Cl atom with n‐hexane and 1‐butene are considered as (3.15 ± 0.40) × 10^?10 and (3.21 ± 0.40) × 10^{? 10} cm³ molecule^?1s^?1, respectively. With these, the calculated values are k(Cl + 1,4‐cyclohexadiene) = (4.06 ± 0.55) × 10^?10 and k(Cl + 1,5‐cyclooctadiene) = (6.90 ± 1.33) × 10^?10 cm³ molecule^?1 s^?1 with respect to n‐hexane. The rate constants determined with respect to 1‐butene are marginally higher, k(Cl + 1,4‐cyclohexadiene) = (4.82 ± 0.80) × 10^{? 10} and k(Cl + 1,5‐cyclooctadiene) = (7.58 ± 1.55) × 10^{? 10} cm³ molecule^?1 s^?1. The experiments for each molecule were repeated three to five times, and the slopes and the rate constants given above are the average values of these measurements, with 2σ as the quoted error, including the error in the reference rate constant. The relative rate ratios of 1,4‐cyclohexadiene with both the reference molecules are found to be higher in the presence of oxygen, and a marginal increase is observed in the case of 1,5‐cyclooctadiene. Benzene is identified as one major product in the case of 1,4‐cyclohexadiene. Considering that the cyclohexadienyl radical, a product of the hydrogen abstraction reaction, is quantitatively converted to benzene in the presence of oxygen, the fraction of Cl atoms that reacts by abstraction is estimated to be 0.30 ± 0.04. The atmospheric implications of the results are discussed. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 431–440, 2011     

Kinetics and mechanism of the reaction of propylene oxide with chlorine atoms and hydroxy radicals

The kinetics and mechanism of gas‐phase propylene oxide (PPO) reactions were studied in a 142‐L reaction chamber by long‐path Fourier transform infrared spectroscopy at atmospheric pressure and 298 K. Rate coefficients for the reaction of PPO with ozone (O₃), chlorine atoms (Cl), and hydroxyl radicals (OH) were measured using the relative rate technique. Product yields of acetic acid, acetic formic anhydride, formic acid, and carbon monoxide were determined for the following reactions: PPO with Cl both in the presence and absence of NO, PPO with OH and NO, methyl acetate with Cl both in the presence and absence of NO, and ethyl formate with Cl both in the presence and absence of NO. The measured rate coefficients for PPO with O₃, Cl, and OH are <3.5 × 10^?21 cm³ molecule^?1 s^?1, (3.0 ± 0.7) × 10^?11 cm³ molecule^?1 s^?1, and (3.0 ± 1.0) × 10^?13 cm³ molecule^?1 s^?1, respectively. The carbon balance for the products measured ranged from 10% (for OH + PPO) to 100% (for Cl + methyl acetate in the absence of NO). The mechanistic and atmospheric implications of these measurements are discussed. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 507–521, 2011     

Photocurrent kinetics during electron emission from metal into electrolyte solution: Part III. H3O+ solutions

The photocurrent kinetics in acid solutions have been investigated. The diffusion coefficients of atoms H?((7±2)×10^?5cm²s^?1) and D?((4±1)×10^?5cm²s^?1) and OH^? and OD^? radicals ((1±0.3)×10^?5cm²s^?1) are found. The rate constants of capture of solvated electrons by H₃O⁺ and D₃O⁺ ions are identical and equal to (8±1)×10⁹M^?1s^?1. From the shape of the kinetic curves it follows that electrochemical desorption of atomic hydrogen occurs from the adsorbed state. The rate constant of this process has been measured. It is shown that the rate constant of electrochemical desorption depends only slightly on the potential.     

Discriminating Amino Resin Paints From Alkyd Resin Paints with Two Kinds of Pigments in Automotive Coatings in Forensic Analysis by FTIR Spectroscopy

The analysis of automotive coatings is important to forensic scientists, especially in the investigation of hit-and-run accidents. Amino resin paints, alkyd resin paints, and polyurethane paints are all popular automotive coatings. In this study, FTIR was employed to investigate these coatings, particular in amino resin paints. IR spectra were tentatively interpreted. The indicative peaks distinguishing amino resin paints (1550 cm^?1) and alkyd resin paints (1600 cm^?1/1580 cm^?1) were summarized. Two kinds of alkyd resin paints (with the Pigment Scarlet Powder and with the Toluidine Red), which were frequently confronted in cases and might readily be read as amino resin paints in IR spectra, were studied and interpreted. The indicative peaks (1619 cm^?1, 776 cm^?1 and 1674 cm^?1, 1494 cm^?1) were selected to discriminate these two kinds of alkyd resin paints from amino resin paints and avoid an incorrect certificate of authenticity. The data in this study can help the forensic scientists identify these three paints accurately, especially in the cases with the interference of the pigments.     

Kinetics and mechanism of the atmospheric oxidation of tertiary amyl methyl ether

Tertiary-amyl methyl ether (TAME) is proposed for use as an additive to increase the oxygen content of gasoline as stipulated in the 1990 Clean Air Amendments. The present experiments have been performed to examine the kinetics and mechanisms of the atmospheric removal of TAME. The kinetics of the reaction of OH with TAME was examined by using a relative rate technique in which photolysis of methyl nitrite or nitrous acid was used as the source of OH. The OH rate constant for TAME and two major products (t-amyl formate and methyl acetate) were measured and yields for ten products were determined as primary products from the reaction. Values determined for the rate constants for the reaction with OH were 5.48 × 10^?12 (TAME), 1.75 × 10^?12 (t-amyl formate), and 3.85 × 10^?13 cm³ molec^?1 s^?1 (methyl acetate) at 298 ± 2 K. The primary products (with corrected yields where required) from the OH + TAME that have been observed include (1) t-amyl formate (0.366), methyl acetate (0.349), acetaldehyde (0.43, corrected), acetone (0.036), formaldehyde (0.549), t-amyl alcohol (0.026), 3-methyoxy-3-methyl-butanal (0.044, corrected), t-amyloxy methyl nitrate (0.029), 3-methyoxy-3-methyl-2-butyl nitrate (0.010), and 2-methoxy-2-methyl butyl nitrate (0.004). Mechanisms leading to these products involve OH abstraction from each of the four different hydrogen atoms of TAME. © 1995 John Wiley & Sons, Inc.     

Kinetics and products of the gas-phase reactions of the OH radical and O3 with allyl chloride and benzyl chloride at room temperature

The kinetics of the gas-phase reactions of allyl chloride and benzyl chloride with the OH radical and O₃ were investigated at 298 ± 2 K and atmospheric pressure. Direct measurements of the rate constants for reactions with ozone yielded values of ??(O₃ + allyl chloride) = (1.60 ± 0.18) × 10^?18 cm³ molecule^?1 s^?1 and ??(O₃ + benzyl chloride) < 6 × 10^?20 cm³ molecule^?1 s^?1. With the use of a relative rate technique and ethane as a scavenger of chlorine atoms produced in the OH radical reactions, rate constants of ??(OH + allyl chloride) = (1.69 ± 0.07) × 10^?11 cm³ molecule^?1 s^?1 and ??(OH + benzyl chloride) = (2.80 ± 0.19) × 10^?12 cm³ molecule^?1 s^?1 were measured. A study of the OH radical reaction with allyl chloride by long pathlength FT-IR absorption spectroscopy indicated that the co-products ClCH₂CHO and HCHO account for ca. 44% of the reaction, and along with the other products HOCH₂CHO, (ClCH₂)₂CO, and CH₂ ? CHCHO account for 84 ± 16% of the allyl chloride reacting. The data indicate that in one atmosphere of air in the presence of NO the chloroalkoxy radical formed following OH radical addition to the terminal carbon atom of the double bond decomposes to yield HOCH₂CHO and the CH₂Cl radical, which becomes a significant source of the Cl atoms involved in secondary reactions. A product study of the OH radical reaction with benzyl chloride identified only benzaldehyde and peroxybenzoyl nitrate in low yields (ca. 8% and ?4%, respectively), with the remainder of the products being unidentified.     

FT‐IR kinetic and product study of the OH radical and Cl‐atom–initiated oxidation of dibasic esters

Using a relative kinetic technique, rate coefficients have been measured, at 296 ± 2 K and 740 Torr total pressure of synthetic air, for the gas‐phase reaction of OH radicals with the dibasic esters dimethyl succinate [CH₃OC(O)CH₂CH₂C(O)OCH₃], dimethyl glutarate [CH₃OC(O)CH₂CH₂CH₂C(O)OCH₃], and dimethyl adipate [CH₃OC(O)CH₂CH₂CH₂CH₂C(O)OCH₃]. The rate coefficients obtained were (in units of cm³ molecule^?1 s^?1): dimethyl succinate (1.89 ± 0.26) × 10^?12; dimethyl glutarate (2.13 ± 0.28) × 10^?12; and dimethyl adipate (3.64 ± 0.66) × 10^?12. Rate coefficients have been also measured for the reaction of chlorine atoms with the three dibasic esters; the rate coefficients obtained were (in units of cm³ molecule^?1 s^?1): dimethyl succinate (6.79 ± 0.93) × 10^?12; dimethyl glutarate (1.90 ± 0.33) × 10^?11; and dimethyl adipate (6.08 ± 0.86) × 10^?11. Dibasic esters are industrial solvents, and their increased use will lead to their possible release into the atmosphere, where they may contribute to the formation of photochemical air pollution in urban and regional areas. Consequently, the products formed from the oxidation of dimethyl succinate have been investigated in a 405‐L Pyrex glass reactor using Cl‐atom–initiated oxidation as a surrogate for the OH radical. The products observed using in situ Fourier transform infrared (FT‐IR) absorption spectroscopy and their fractional molar yields were: succinic formic anhydride (0.341 ± 0.068), monomethyl succinate (0.447 ± 0.111), carbon monoxide (0.307 ± 0.061), dimethyl oxaloacetate (0.176 ± 0.044), and methoxy formylperoxynitrate (0.032–0.084). These products account for 82.4 ± 16.4% C of the total reaction products. Although there are large uncertainties in the quantification of monomethyl succinate and dimethyl oxaloacetate, the product study allows the elucidation of an oxidation mechanism for dimethyl succinate. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 431–439, 2001     

A measurement of the rate of the reaction N + H + M → NH + M

The combination reaction between N and H atoms has been studied in a flow system by mixing H atoms produced by thermal dissociation of H₂ with active nitrogen produced by a microwave discharge. Relative N atom concentrations were determined from the intensity of the yellow nitrogen afterglow. Absolute N and H atom concentrations were measured by EPR absorption spectroscopy. Absolute N atom concentrations were also determined by titration with NO. Upper and lower limits of 6.4 ± 1.5 × 10^?32 and 3.1 ± 1.0 × 10^?32 cm⁶ molecule^?2 sec^?1 were determined for the rate constant.     

Rate coefficients and products for gas‐phase reactions of chlorine atoms with cyclic unsaturated hydrocarbons at 298 K

Rate coefficients for the reaction of Cl atoms with cycloalkenes have been determined using the relative rate method, at 298 K and atmospheric pressure of N₂. Reference molecule was n‐hexane, and the concentrations of the organics were followed by gas chromatographic analysis. Cl atoms were prepared by photolysis of trichloroacetyl chloride at 254 nm. The relative rates of reactions of Cl atoms with cycloalkenes, with respect to n‐hexane, are measured as 1.12 ± 0.38, 1.31 ± 0.14, and 1.69 ± 0.18 for cyclopentene, cyclohexene, and cycloheptene, respectively. Considering the absolute value of the rate coefficient of the reaction of Cl atom with n‐hexane as 3.03 ± 0.06 × 10^?10 cm³ molecule^?1 s^?1, the rate coefficient values for cyclopentene, cyclohexene, and cycloheptene are calculated to be (3.39 ± 1.08) × 10^?10, (3.97 ± 0.43) × 10^?10, and (5.12 ± 0.55) × 10^?10 cm³ molecule^?1 s^?1, respectively. The experiments for each molecule were repeated six to eight times, and the slopes and the rate coefficients given above are the average values of these measurements, and the quoted error includes 2σ as well as all other uncertainties in the measurement and calculations. The rate coefficient increases linearly with the number of carbon atoms, with an increment per additional CH₂ group being (8.7 ± 1.6) × 10^?12 cm³ molecule^?1 s^?1. Chloroketones and chloroalcohols, along with unsaturated ketones and alcohols, were found to be the major products of Cl‐atom‐initiated oxidation of cycloalkenes in the presence of air. The atmospheric implications of these results are discussed, along with a comparison with the reported structure activity relationships. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 42: 98–105, 2010     

Kinetics and mechanism of the reactions of n‐butanal and n‐pentanal with chlorine atoms

The kinetics and mechanism of the reaction of chlorine atoms with n‐butanal and n‐pentanal have been investigated in a 142‐L reaction cell coupled to a Fourier transform infrared (FTIR) spectrometer at 298 ± 2 K and at 800 ± 3 Torr. The rate coefficients for Cl + n‐butanal and Cl + n‐pentanal were measured using the relative rate technique with isopropanol and ethene as the reference compounds. The yield of acyl radicals was determined by measuring yields of acid chloride and carbon monoxide products from the reaction of Cl + aldehyde in the absence of oxygen. The rate coefficients for Cl + n‐butanal and Cl + n‐pentanal are (1.63 ± 0.59) × 10^?10 cm³ molecule^?1 s^{? 1} and (2.37 ± 0.82) × 10^?10 cm³ molecule^?1 s^?1, respectively. The yields of acyl radicals from the reactions are 0.66 ± 0.04 for n‐butanal and 0.45 ± 0.04 for n‐pentanal. Under ambient conditions, the acyl radicals generated will react almost exclusively with oxygen. Mechanistic implications of these measurements are discussed. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 133–141, 2009     

Rate constants for the reactions of chlorine atoms with hydrochloroethers at 298 k and atmospheric pressure

The relative rate technique has been used to determine the rate constants for the reactions Cl + CH₃OCHCl₂ → products and Cl + CH₃OCH₂CH₂Cl → products. Experiments were carried out at 298 ± 2 K and atmospheric pressure using nitrogen as the bath gas. The decay rates of the organic species were measured relative to those of 1,2‐dichloroethane, acetone, and ethane. Using rate constants of (1.3 ± 0.2) × 10^?12 cm³ molecule^?1 s^?1, (2.4 ± 0.4) × 10^?12 cm³ molecule^?1 s^?1, and (5.9 ± 0.6) × 10^?11 cm³ molecule^?1 s^?1 for the reactions of Cl atoms with 1,2‐dichloroethane, acetone, and ethane respectively, the following rate coefficients were derived for the reaction of Cl atoms (in units of cm³ molecule^?1 s^?1) with CH₃OCHCl₂, k= (1.04 ± 0.30) × 10^?12 and CH₃OCH₂CH₂Cl, k= (1.11 ± 0.20) × 10^?10. Errors quoted represent two σ, and include the errors due to the uncertainties in the rate constants used to place our relative measurements on an absolute basis. The rate constants obtained are compared with previous literature data and used to estimate the atmospheric lifetimes for the studied ethers. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 420–426, 2005     

A relative rate study of the reaction of Cl atoms with a series of alkyl nitrates and nitro alkanes in air at 295 ± 2 K

The relative rate technique has been used to measure rate constants for the reaction of chlorine atoms with nitro methane, nitro ethane, nitro propane, nitro butane, nitro pentane, ethyl nitrate, isopropyl nitrate, n-propyl nitrate, 2-pentyl nitrate, and 2-heptyl nitrate. Decay rates of these organic species were measured relative to one or more of the following reference compounds; n-butane, ethane, chloroethane, and methane. Using rate constants of 2.25 × 10^?10 5.7 × 10^?11, 8.04 × 10^?12, and 1.0 × 10^?13 cm³ molecule^?1 s^?1 for the reaction of Cl atoms with n-butane, ethane, chloroethane, and methane, respectively, the following rate constants were derived, in units of cm³ molecule^?1 s^?1: nitro methane, <7 × 10^?15; nitro ethane, (2.05 ± 0.14) × 10^?13; nitro propane, (1.13 ± 0.05) × 10^?11; nitro butane, (5.13 ± 0.68) × 10^?11; nitro pentane, (1.40 ± 0.14) × 10^?10; ethyl nitrate, (3.70 ± 0.24) × 10^?12; n-propyl nitrate, (2.15 ± 0.13) × 10^?11; i-propyl nitrate, (3.94 ± 0.48) × 10^?12; 2-pentyl nitrate, (1.00 ± 0.06) × 10^?10; and 2-heptyl nitrate, (2.84 ± 0.50) × 10^?10. Quoted errors represent 2σ and do not include possible systematic errors due to errors in the reference rate constants. Experiments were performed at 295 ± 2 K and atmospheric pressure (?740 torr) of synthetic air. The results are discussed with respect to the previous literature data and to the modeling of these compounds in the atmosphere.     

A relative rate study of the reaction of bromine atoms with a variety of organic compounds at 295 K

The relative rate technique has been used to determine rate constants for the reaction of bromine atoms with a variety of organic compounds. Decay rates of the organic species were measured relative to i-butane or acetaldehyde or both. Using rate constants of 1.74 × 10^?15 and 3.5 × 10^?12 cm³ molecule^?1 s^?1 for the reaction of Br with i?butane and acetaldehyde respectively, the following rate constants were derived, in units of cm³ molecule^?1 s^?1: 2, 3?dimethylbutane, (6.40 ± 0.77) × 10^?15; cyclopentane, (1.16 ± 0.18) × 10^?15, ethene, (≤2.3 × 10^?13); propene, (3.85 ± 0.41) × 10^?12; trans-2-butene, (9.50 ± 0.76) × 10^?12, acetylene, (5.15 ± 0.19) × 10^?15; and propionaldehyde, (9.73 ± 0.91) × 10^?12. Quoted errors represent 2σ and do not include possible systematic errors due to errors in the reference rate constants. Experiments were performed at 295 ± 2 K and atmospheric pressure of synthetic air or nitrogen. The results are discussed with respect to the mechanisms of these reactions and their utility in serving as a laboratory source of alkyl and alkyl peroxy radicals.     

UV absorption spectrum of CF3CFClO2 and kinetics of the self reaction of CF3CFCl and CF3CFClO2 and the reactions of CF3CFClO2 with NO and NO2

The ultraviolet absorption spectrum of CF₃CFClO₂ and the kinetics of the self reactions of CF₃CFCl and CF₃CFClO₂ radicals and the reactions of CF₃CFClO₂ with NO and NO₂ have been studied in the gas phase at 295 K by pulse radiolysis/transient UV absorption spectroscopy. The UV absorption cross section of CF₃CFCl radicals was measured to be (1.78 ± 0.22) × 10^?18 cm² molecule^?1 at 220 nm. The UV spectrum of CF₃CFClO₂ radicals was quantified from 220 nm to 290 nm. The absorption cross section at 250 nm was determined to be (1.67 ± 0.21) × 10^?18 cm² molecule^?1. The rate constants for the self reactions of CF₃CFCl and CF₃CFClO₂ radicals were (2.6 ± 0.4) × 10^?12 cm³ molecule^?1 s^?1 and (2.6 ± 0.5) × 10^?12 cm³ molecule^?1 s^?1, respectively. The reactivity of CF₃CFClO₂ radicals towards NO and NO₂ was determined to (1.5 ± 0.6) × 10^?11 cm³ molecule^?1 s^?1 and (5.9 ± 0.5) × 10^?12 cm³ molecule^?1 s^?1, respectively. Finally, the rate constant for the reaction of F atoms with CF₃CFClH was determined to (8 ± 2) × 10^?13 cm³ molecule^?1 s^?1. Results are discussed in the context of the atmospheric chemistry of HCFC-124, CF₃CFClH. © 1994 John Wiley & Sons, Inc.     

Rate constant for the reaction Cl + HO2NO2 → products

The total rate constant for the reaction of Cl atoms with HO₂NO₂ was found to be less than 1.0 × 10^?13 cm³ s^?1 at 296 K by the discharge flow/resonance fluorescence technique. The reaction was also studied by the discharge flow/mass spectrometric technique. k_1a + k_1b was measured to be (3.4 ± 1.4) × 10^?14 cm³ s^?1 at 296 K. The reaction is too slow to be of any importance in stratospheric chemistry.     

Tungsten oxide bronzes with alkali metals

Single-phase samples of tungsten bronzes M _x WO₃ (M = K⁺, Rb⁺, Cs⁺) are prepared by solid-state synthesis. The reversibility of the M_0.33WO₃/M⁺-solid electrolyte interface is studied subject to the alkali metal nature and humidity over a wide temperature interval. The exchange current density at 24°C and 58%-relative humidity is 3.6 × 10^?4 A/cm² for the Rb_0.33WO₃/Rb⁺-solid electrolyte interface; 2.2 × 10^?4 A/cm² for the Cs_0.33WO₃/Cs⁺-solid electrolyte interface; and 1.3 × 10^?4 A/cm² for the K_0.33WO₃/K⁺-solid electrolyte interface. A correlation between the reversibility of the bronze|solid electrolyte interface, which is characterized by the exchange current density, and the rate of potential equilibration in sensor systems, where the bronze is a reference electrode, is revealed. Ionic component of the conductivity of the synthesized tungsten oxide bronzes is measured at a background of the predominant electronic conductivity. The ionic conductivity is three orders of magnitude lower than the electronic conductivity; it decreases in the series Rb_0.33WO₃ > Cs_0.33WO₃ > K_0.33WO₃, amounting to 2.3 × 10^?2, 2.1 × 10^?3, and 2 × 10^?4 S cm^?1, respectively. The working capacity of the M_0.3WO₃ bronzes as reference electrodes in sensor systems for carbon dioxide detection is evaluated. The plots of the cell potential vs. the CO₂ concentration in the electrochemical cells are linear, their slopes (59 ± 1 mV/decade) are characteristic for one-electron process. The fastest response to changes in the CO₂ concentration was obtained with the sensor system that used Rb_0.33WO₃ as reference electrode.     

Hybrid phospholipid bilayer coatings for separations of cationic proteins in capillary zone electrophoresis

Protein separations in CZE suffer from nonspecific adsorption of analytes to the capillary surface. Semipermanent phospholipid bilayers have been used to minimize adsorption, but must be regenerated regularly to ensure reproducibility. We investigated the formation, characterization, and use of hybrid phospholipid bilayers (HPBs) as more stable biosurfactant capillary coatings for CZE protein separations. HPBs are formed by covalently modifying a support with a hydrophobic monolayer onto which a self‐assembled lipid monolayer is deposited. Monolayers prepared in capillaries using 3‐cyanopropyldimethylchlorosilane (CPDCS) or n‐octyldimethylchlorosilane (ODCS) yielded hydrophobic surfaces with lowered surface free energies of 6.0 ± 0.3 or 0.2 ± 0.1 mJ m^?2, respectively, compared to 17 ± 1 mJ m^?2 for bare silica capillaries. HPBs were formed by subsequently fusing vesicles comprised of 1,2‐dilauroyl‐sn‐glycero‐3‐phosphocholine or 1,2‐dioleoyl‐sn‐glycero‐3‐phosphocholine to CPDCS‐ or ODCS‐modified capillaries. The resultant HPB coatings shielded the capillary surface and yielded reduced electroosmotic mobility (1.3–1.9 × 10^?4 cm² V^?1s^?1) compared to CPDCS‐ and ODCS‐modified or bare capillaries (3.6 ± 0.2 × 10^?4 cm² V^?1s^?1, 4.8 ± 0.4 × 10^?4 cm² V^?1s^?1, and 6.0 ± 0.2 × 10^?4 cm² V^?1s^?1, respectively), with increased stability compared to phospholipid bilayer coatings. HPB‐coated capillaries yielded reproducible protein migration times (RSD ≤ 3.6%, n ≥ 6) with separation efficiencies as high as 200 000 plates/m.     

Reactions of the IO· radical resulting in hydrogen atom abstraction from halogen-containing molecules

A jet-stream kinetic technique and the resonance fluorescence method applied to detection of iodine atoms were used to measure the rate constants of the reactions of the IO^· radical with the halohydrocarbons CHFCl-CF₂Cl (k = (3.2 ± 0.9) × 10^?16 cm³ molecule s^?1) and CH₂ClF (k = (9.4 ± 1.3) × 10^?16 cm³ molecule s^?1), the hydrogen-containing haloethers CF₃-O-CH₃ (k = (6.4 ± 0.9) × 10^?16 cm³ molecule s^?1) and CF₃CH₂-O-CHF₂ (k = (1.2 ± 0.6) × 10^?15 cm³ molecule s^?1), and hydrogen iodide (k = (1.3 ± 0.9) × 10^?12 cm³ molecule s^?1) at 323 K.     

Resonance ionisation of Ga atoms

Saturation of the photoionisation of Ga atoms by resonance ionisation is demonstrated. The photoionisation cross section of the excited 4s²(1S)_3/2 state is measured to be 3 × 10^?18 cm². Saturation (100% ionisation) of a given samnple is achieved at power levels of the order of 100 MW/cm².     

A Non‐Enzymatic Glucose Sensor Based on Ni/MnO2 Nanocomposite Modified Glassy Carbon Electrode

A novel flower like 3D nickel/manganese dioxide (Ni/MnO₂) nanocomposite was synthesized by a kind of simple electrochemical method and the formation mechanism of flower like structure was also researched. In addition, morphology and composition of the nanocomposite were characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), and X‐ray photoelectron spectroscopy (XPS). Then the Ni/MnO₂ nanocomposites were applied to fabricate electrochemical non‐enzymatic glucose sensor. The electrochemical investigation for the sensor indicated that it possessed an excellent electrocatalytic property for glucose, and could applied to the quantification of glucose with a linear range from 2.5×10^?7 to 3.5×10^?3 M, a sensitivity of 1.04 mA mM^?1 cm^?2, and a detection limit of 1×10^?7 M (S/N=3). The proposed sensor also presented attractive features such as interference‐free, and long‐term stability. The present study provided a general platform for the one‐step synthesis of nanomaterials with novel structure and can be extended to other optical, electronic and magnetic nanocompounds.