Subsolidus phase diagram of Cu2OCuOMoO3 system

Five chemical compounds, CuMoO₄, Cu₃Mo₂O₉, Cu₂Mo₃O₁₀, Cu₆Mo₄O₁₅, and Cu_4?x Mo₃O₁₂ (0.10 ? x ? 0.40), were identified in the system Cu₂OCuOMoO₃ and characterized by DTA, X-ray powder patterns, ir spectra, and magnetic properties. Cupric molybdates CuMoO₄ and Cu₃Mo₂O₉ are stable in air up to 820 and 855°C, respectively, melting at these temperatures with simultaneous decomposition (oxygen loss). Congruent mp of cuprous molybdates Cu₂Mo₃O₁₀ and Cu₆Mo₄O₁₅, in argon, are 532 and 466°C, respectively. Nonstoichiometric phase Cu_4?x Mo₃O₁₂ = Cu²⁺₃Cu⁰_1?xMo⁶⁺₃O₁₂, melts in argon between 630 and 650°C depending on the value of x and at 525–530°C undergoes polymorphic transformation. Areas of coexistence of the above-mentioned phases are determined. The μ_eff of Cu²⁺ ions and θ values are: 1.80 B.M. and 28°K for CuMoO₄, 1.71 B.M. and ? 12°K for Cu₃Mo₂O₉, and 1.74 B.M. and ? 93°K for Cu_4?xMo₃O₁₂. Below 200°K CuMoO₄ becomes antiferromagnetic. Cu₂Mo₃O₁₀ and Cu₆Mo₄O₁₅ show weak temperature-independent paramagnetism.     

Development of a liquid chromatography-mass spectrometry method for the determination of ursolic acid in rat plasma and tissue: application to the pharmacokinetic and tissue distribution study

A fast and sensitive liquid chromatography–mass spectrometry method was developed for the determination of ursolic acid (UA) in rat plasma and tissues. Glycyrrhetinic acid was used as the internal standard (IS). Chromatographic separation was performed on a 3.5 μm Zorbax SB-C18 column (30 mm × 2.1 mm) with a mobile phase consisting of methanol and aqueous 10 mM ammonium acetate using gradient elution. Quantification was performed by selected ion monitoring with (m/z)⁻ 455 for UA and (m/z)⁻ 469 for the IS. The method was validated in the concentration range of 2.5 − 1470 ng mL⁻¹ for plasma samples and 20 − 11760 ng g⁻¹ for tissue homogenates. The intra- and inter-day assay of precision in plasma and tissues ranged from 1.6% to 7.1% and 3.7% to 9.0%, respectively, and the intra- and inter-day assay accuracy was 84.2 − 106.9% and 82.1 − 108.1%, respectively. Recoveries in plasma and tissues ranged from 83.2% to 106.2%. The limits of detections were 0.5 ng mL⁻¹ or 4.0 ng g⁻¹. The recoveries for all samples were >90%, except for liver, which indicated that ursolic acid may metabolize in liver. The main pharmacokinetic parameters obtained were T _max = 0.42 ± 0.11 h, C _max = 1.10 ± 0.31 μg mL⁻¹, AUC = 1.45 ± 0.21 μg h mL⁻¹ and K _a = 5.64 ± 1.89 h⁻¹. The concentrations of UA in rat lung, spleen, liver, heart, and cerebellum were studied for the first time. This method is validated and could be applicable to the investigation of the pharmacokinetics and tissue distribution of UA in rats.     

Synthesis, photophysical properties and sugar-dependent in vitro photocytotoxicity of pyrrolidine-fused chlorins bearing S-glycosides

Eight S-glycosylated 5,10,15,20-tetrakis(tetrafluorophenyl)porphyrins (1a′, 1b′, 1a and 1b (a: S-glucosylated, b: S-galactosylated)) and their 1,3-dipolar cycloadducts, i.e. chlorins 2a′, 2b′, 2a and 2b were prepared by nucleophilic substitution of the pentafluorophenyl groups with S-glycoside. These photosensitizers were characterized by ¹H, ¹³C and ¹⁹F NMR spectroscopies and elemental analysis. The photocytotoxicity of the S-glycosylated photosensitizers and the parent porphyrin (1) and chlorin (2) was examined in HeLa cells. Photosensitizers 1, 2, 1a′, 1b′, 2a′ and 2b′ showed no significant photocytotoxicity at the concentration of 0.5 μM, while the deprotected photosensitizers 1a, 1b, 2a and 2b were photocytotoxic. The strong inhibition by sodium azide of the photocytotoxicity of these photosensitizers suggested that ¹O₂ is the main mediator. The S-glucosylated photosensitizers 1a and 2a showed higher photocytotoxicity than S-galactosylated 1b and 2b, respectively. The cellular uptake of 1a and 2a increased up to 24 h, while that of 1b and 2b was saturated by 12 h.     

Biocatalytic and chemical routes to all the stereoisomers of methionine and ethionine sulfoxides

Biotransformations of the N-phthaloyl derivatives of d- and l-methionine and of d- and l-ethionine by Beauveria bassiana ATCC 7159 or Beauveria caledonica ATCC 64970 produce the corresponding (S_S) sulfoxides in good yield and diastereomeric excess. Pure (S_SS_C) diastereomers can be obtained from l-series substrates by crystallisation of the biotransformation extract, and the corresponding (S_SR_C) products obtained from d-series substrates by chromatography of the biotransformation extract. Hydrogen peroxide-catalysed oxidation of the N-phthaloyl derivatives of d- and l-methionine and of d- and l-ethionine gives diastereomeric mixtures from which the (S_SS_C) and (R_SR_C) diastereomers can be obtained by crystallisation, and the (S_SR_C) and (R_SS_C) diastereomers obtained by chromatography. N-Cbz- and N-t-Boc methionines are also converted to sulfoxides with predominant (S_S) configuration by both B. bassiana and B. caledonica, but the isolated yields and d.e. of products were generally lower than those obtained from the N-phthaloyl substrates.Removal of the N-phthaloyl group from diastereomerically pure methionine and ethionine sulfoxides gave the corresponding amino acid sulfoxides in high yield; removal of N-Cbz and N-t-Boc groups from protected methionine sulfoxides was also achieved without loss of configuration at sulfur.     

Energetics of formation of alkali and ammonium cobalt and zinc phosphate frameworks

Alkali and ammonium cobalt and zinc phosphates show extensive polymorphism. Thermal behavior, relative stabilities, and enthalpies of formation of KCoPO₄, RbCoPO₄, NH₄CoPO₄, and NH₄ZnPO₄ polymorphs are studied by differential scanning calorimetry, high-temperature oxide melt solution calorimetry, and acid solution calorimetry.α-KCoPO₄ and γ-KCoPO₄ are very similar in enthalpy. γ-KCoPO₄ slowly transforms to α-KCoPO₄ near 673 K. The high-temperature phase, β-KCoPO₄, is 5-7 kJ mol⁻¹ higher in enthalpy than α-KCoPO₄ and γ-KCoPO₄. HEX phases of NH₄CoPO₄ and NH₄ZnPO₄ are about 3 kJ mol⁻¹ lower in enthalpy than the corresponding ABW phases. There is a strong relationship between enthalpy of formation from oxides and acid-base interaction for cobalt and zinc phosphates and also for aluminosilicates with related frameworks. Cobalt and zinc phosphates exhibit similar trends in enthalpies of formation from oxides as aluminosilicates, but their enthalpies of formation from oxides are more exothermic because of their stronger acid-base interactions. Enthalpies of formation from ammonia and oxides of NH₄CoPO₄ and NH₄ZnPO₄ are similar, reflecting the similar basicity of CoO and ZnO.     

Calixarene coated gold nanoparticles as a novel therapeutic agent

In the current study, gold nanoparticles (AuC6NPs and AuC8NPs) were prepared through sodium borohydride reduction method by using Calix[6]rene and Calix[8]rene as a stabilizing agents. The synthesized AuNPs were screened for cytotoxic, phytotoxic, antifungal and antibacterial activities. The fabricated AuNPs were characterized by UV–visible spectroscopy, atomic force microscopy (AFM) and FTIR spectroscopy. Antibacterial activities of the AuNPs were tested against E. coli and S. aureus. The AuC6NPs were found to be effective against the growth of gram positive bacteria and inhibited the growth of S. aureus. AuC6NPs interact with bacterial cell and damaged cell membrane. Roughness of the bacterial surface and membrane rupture can be clearly observed by AFM images. The AuNPs possess insignificant antifungal activity against Aspergillus niger and Candida albicans. Moreover, AuC8NPs have significant phytotoxicity and moderate cytotoxicity.     

Sample cleanup-free determination of mycophenolic acid and its glucuronide in serum and plasma using the novel technology of ultra-performance liquid chromatography-electrospray ionization tandem mass spectrometry

Mycophenolic acid (MPA) is an immunosuppressant drug which powerfully inhibits lymphocyte proliferation. Since the early 1990s it has been used to prevent rejection in organ transplantation. The requirement of therapeutic drug monitoring shown in previous studies raises the necessity of acquiring accurate and sensitive methods to measure MPA and its major metabolite mycophenolic acid glucuronide (MPAG).The authors developed a sample cleanup-free, rapid, and highly specific method for simultaneous measurement of MPA and MPAG in human plasma and serum using the novel technology of ultra-performance liquid chromatography-electrospray ionization tandem mass spectrometry. MPA- and MPAG-determinations were performed during a 2.0-min run time. Multiple calibration curves for the analysis of MPA and MPAG exhibited consistent linearity and reproducibility in the range of 0.05-100 (r > 0.999) mg L⁻¹ and 4-4000 mg L⁻¹ (r > 0.999), respectively. Limits of Detection were 0.014 mg L⁻¹ for MPA and 1.85 mg L⁻¹ for MPAG. Lower Limits of Quantification were 0.05 mg L⁻¹ for MPA and 2.30 mg L⁻¹ for MPAG. Interassay imprecision was <10% for both substances. Mean recovery was 103.6% (range 78.1-129.7%) for MPA and 111.1% (range 73.0-139.6%) for MPAG. Agreement was good for MPA and MPAG between the presented method and a validated HPLC-MS/MS method. The Passing-Bablok regression line for MPA and MPAG was HPLC-MS/MS = 1.14 UPLC-MS/MS—0.14 [mg L⁻¹], r = 0.96, and HPLC-MS/MS = 0.77 UPLC-MS/MS + 0.50 [mg L⁻¹], r = 0.97, respectively. This sample cleanup-free and robust LC-MS/MS assay facilitates the rapid, accurate and simultaneous determination of MPA and MPAG in human body fluids.     

Fast sequential multi-element determination of Ca,Mg, K,Cu, Fe,Mn and Zn for foliar diagnosis using high-resolution continuum source flame atomic absorption spectrometry: Feasibility of secondary lines,side pixel registration and least-squares background correction

The fast sequential multi-element determination of Ca, Mg, K, Cu, Fe, Mn and Zn in plant tissues by high-resolution continuum source flame atomic absorption spectrometry is proposed. For this, the main lines for Cu (324.754 nm), Fe (248.327 nm), Mn (279.482 nm) and Zn (213.857 nm) were selected, and the secondary lines for Ca (239.856 nm), Mg (202.582 nm) and K (404.414 nm) were evaluated. The side pixel registration approach was studied to reduce sensitivity and extend the linear working range for Mg by measuring at wings (202.576 nm; 202.577 nm; 202.578 nm; 202.580 nm; 202.585 nm; 202.586 nm; 202.587 nm; 202.588 nm) of the secondary line. The interference caused by NO bands on Zn at 213.857 nm was removed using the least-squares background correction. Using the main lines for Cu, Fe, Mn and Zn, secondary lines for Ca and K, and line wing at 202.588 nm for Mg, and 5 mL min^− 1 sample flow-rate, calibration curves in the 0.1–0.5 mg L^− 1 Cu, 0.5–4.0 mg L^− 1 Fe, 0.5–4.0 mg L^− 1 Mn, 0.2–1.0 mg L^− 1 Zn, 10.0–100.0 mg L^− 1 Ca, 5.0–40.0 mg L^− 1 Mg and 50.0–250.0 mg L^− 1 K ranges were consistently obtained. Accuracy and precision were evaluated after analysis of five plant standard reference materials. Results were in agreement at a 95% confidence level (paired t-test) with certified values. The proposed method was applied to digests of sugar-cane leaves and results were close to those obtained by line-source flame atomic absorption spectrometry. Recoveries of Ca, Mg, K, Cu, Fe, Mn and Zn in the 89–103%, 84–107%, 87–103%, 85–105%, 92–106%, 91–114%, 96–114% intervals, respectively, were obtained. The limits of detection were 0.6 mg L^− 1 Ca, 0.4 mg L^− 1 Mg, 0.4 mg L^− 1 K, 7.7 µg L^− 1 Cu, 7.7 µg L^− 1 Fe, 1.5 µg L^− 1 Mn and 5.9 µg L^− 1 Zn.     

Zur Kenntnis der Sulfensäurefluoride CF3SF und CF2ClSF sowie deren Dimeren

The Sulfenic Fluorides CF₃SF and CF₂CISF and their Dimers The reactions of R_fSCl (R_f = CF₃, CF₂Cl) with HgF₂ and AgF give R_fSF and the dimer product R_fSF₂SR_f in high yield and various ratios, in contrast, activated KF leads only to R_fSF in low yield. A complex of transition metal and sulfenic halide as an intermediate step is discussed for the dimerisation. As liquid CF₃SF₂SCF₃ disproportionates into CF₃SF₃ and CF₃SSCF₃ and the hydrolysis of CF₃SF₂SCF₃ gives the stable compound CF₃S(O)SCF₃ · PF₃ reacts with R_fSF as well as with R_fSF₂SR_f to R_fSPF₄. The products of the spontaneous decomposition of CF₂ClSF were investigated. I.r., n.m.r., and mass spectra are reported and discussed. It was possible to carry out vapour pressure measurements of CF₂ClSF.     

Crystal structure, microstructure and reducibility of LaNixCo1−xO3 and LaFexCo1−xO3 Perovskites (0<x≤0.5)

Nickel and iron substituted LaCoO₃ with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 °C by thermal decomposition of freeze-dried citrates and by the Pechini method. The crystal structure, morphology and defective structure of LaCo_1−xNi_xO₃ and LaCo_1−xFe_xO₃ were characterized by X-ray diffraction and neutron powder diffraction, TEM and SEM analyses and electron paramagnetic resonance spectroscopy. The reducibility was tested by temperature programmed reduction with hydrogen. The products of the partial and complete reduction were determined by ex-situ XRD experiments. The replacement of Co by Ni and Fe led to lattice expansion of the perovskite structure. For perovskites annealed at 900 °C, there was a random Ni, Fe and Co distribution. The morphology of the perovskites does not depend on the Ni and Fe content, nor does it depend on the type of the precursor used. LaCo_1−xNi_xO₃ perovskites (x>0.1) annealed at 900 °C are reduced to Co/Ni transition metal and La₂O₃ via the formation of oxygen deficient Brownmillerite-type compositions. For LaCo_1−xNi_xO₃ annealed at 600 °C, Co/Ni metal, in addition to oxygen-deficient perovskites, was formed as an intermediate product at the initial stage of the reduction. The interaction of LaCo_1−xFe_xO₃ with H₂ occurs by reduction of Co³⁺ to Co²⁺ prior to the Fe³⁺ ions. The reducibility of Fe-substituted perovskites is less sensitive towards the synthesis procedure in comparison with that of Ni substituted perovskites.     

Radiological characterization of phosphate fertilizers: Comparison between alpha and gamma spectrometry

The natural radioactivity in phosphate fertilizers used in central Italy has been measured by alpha and gamma spectrometry. The results show that the specific activities of ²³⁸U, ²³⁴U and ²³⁵U ranged within interval from < 0.5 to 2628.8, from < 0.5 to 2826.3 and from < 0.9 to 138.0 Bq kg^{− 1} respectively and those of ²¹⁰Pb and ²¹⁰Po ranged within interval from < 15.0 to 401.5 and < 0.5 to 351.6 Bq kg^{− 1} respectively. The ²²⁸Th, ²³⁰Th and ²³²Th concentrations found by alpha spectrometry ranged from < 0.5 to 50.2, from 0.9 to 2727.2 and from < 0.5 to 60.8 Bq kg^{− 1} respectively. ²²⁶Ra and ²²⁸Ra activity concentrations ranged from < 14.3 to 290.9 and from < 2.9 to 24.9 respectively. ⁴⁰K specific activities ranged from 39.2 to 8263.7 Bq kg^{− 1}. A very good correlation exists between the activity concentrations found by alpha spectrometry and those found by gamma spectrometry.     

Decavanadates with complex cations: synthesis and structure of (NH4)2[M(H2O)5(NH3CH2CH2COO)]2V10O28·nH2O (M?=?ZnII, n?=?4; M?=?MnII, n?=?2)

Decavanadates with complex cations, (NH₄)₂[Zn(H₂O)₅(NH₃CH₂CH₂COO)]₂V₁₀O₂₈·4H₂O (4) and (NH₄)₂[Mn(H₂O)₅(NH₃CH₂CH₂COO)]₂V₁₀O₂₈·2H₂O (5), have been prepared and characterized by elemental analysis, i.r., Raman, UV–vis. and ⁵¹V-n.m.r. spectroscopies and by thermal analysis. The X-ray structure determination revealed, both in 4 and 5, the presence of complex cations with hexacoordinated central atoms and monodentate β-alanine ligands, and decavanadate V₁₀O₂₈ ⁶⁻ anions. The differences in the structural arrangement in 4 and 5 are probably a consequence of the different ionic radii of Zn²⁺ and Mn²⁺ (high spin).     

Chalkogenfluoride in niedrigen Oxydationsstufen. V. Die ungewöhnlichen chemischen Gleichgewichte F3S?SF ⇌ 2SF2 und CF3SF2?SCF3 ⇌ 2 CF3SF

Lower Chalcogen Fluorides V. Unusual Chemical Equilibria F₃S? SF ? 2 SF₂ and CF₃SF₂? SCF₃ ? 2 CF₃SF SF₂ and CF₃SF form unusual chemical equilibria with their dimers F₃SSF and CF₃SF₂ SCF₃ involving two different bonds (SF and SS). The equilibrium between F₃SSF and SF₂ is disturbed by a decomposition reaction of these compounds yielding SF₄ and SSF₂ · K_p (298) = 2.5 · 10^?3atm, ΔH°₂₉₈ = 68.5 kJ/mol for the system F₃SSF ? 2SF₂ and K_p(298) = 1.3 × 10³ atm, δH₂₉₈ = 42.5 kJ/mol for the system CF₃SF₂SCF₃ ? 2CF₃SF have been determined as the equilibrium constants and the dissociation enthalpies. In both systems kinetic hindrance delays the achievement of the equilibrium. The rates for dissociation and decomposition are strongly surface dependent. Under favourable conditions the half-lives at 298 K for the dissociation of F₃SSF and CF₃SF₂SCF₃ are found to be ca. 8 h and ca. 2 h respectively, and for the decomposition of SF₂ and CF₃SF (p ～ 13 mbar) the values are ca. 10 h and 1 year respectively.     

Anchored thiol smectite clay—kinetic and thermodynamic studies of divalent copper and cobalt adsorption

A natural smectite clay sample from Serra de Maicuru, Pará State, Brazil, had aluminum and zirconium polyoxycations inserted within the interlayer space. The precursor and pillarized smectites were organofunctionalized with the silyating agent 3-mercaptopropyltrimethoxysilane. The basal spacing of 1.47 nm for natural clay increased to 2.58 and 2.63 nm, for pillared aluminum, S_Al/SH, and zirconium, S_Zr/SH, and increases in the surface area from 44 to 583 and 585 m² g⁻¹, respectively. These chemically immobilized clay samples adsorb divalent copper and cobalt cations from aqueous solutions of pH 5.0 at 298±1 K. The Langmuir, Redlich-Peterson and Toth adsorption isotherm models have been applied to fit the experimental data with a nonlinear approach. From the cation/basic center interactions for each smectite at the solid-liquid interface, by using van’t Hoff methodology, the equilibrium constant and exothermic thermal effects were calculated. By considering the net interactive number of moles for each cation and the equilibrium constant, the enthalpy, Δ_intH⁰ (−9.2±0.2 to −10.2±0.2 kJ mol⁻¹) and negative Gibbs free energy, Δ_intG⁰ (−23.9±0.1 to −28.7±0.1 kJ mol⁻¹) were calculated. These values enabled the positive entropy, Δ_intS⁰ (51.3±0.3 to 55.0±0.3 JK⁻¹ mol⁻¹) determination. The cation-sulfur interactive process is spontaneous in nature, reflecting the favorable enthalpic and entropic results. The kinetics of adsorption demonstrated that the fit is in agreement with a second-order model reaction with rate constant k₂, varying from 4.8×10⁻² to 15.0×10⁻² and 3.9×10⁻² to 12.2×10⁻² mmol⁻¹ min⁻¹ for copper and cobalt, respectively.     

Polymorphism in mercury(I) selenite(IV): preparation, crystal structures of α-, β-and γ-Hg2SeO3, and thermal behavior of the α- and β-modification

Mercury(I) selenite(IV) is polymorphic and crystallizes at least in three modifications, named α-, β-and γ-Hg₂SeO₃. Polycrystalline β-Hg₂SeO₃ was prepared by precipitation of a concentrated mercurous nitrate solution with selenous acid. Hydrothermal treatment of the colorless β-Hg₂SeO₃ powder in demineralized water at 250°C (10 days) yields light-yellow single crystals of α-Hg₂SeO₃ which show the highest density of the three modifications. Colorless needle-shaped single crystals of β-Hg₂SeO₃ and very few single crystals of γ-Hg₂SeO₃ co-crystallize from strongly diluted Hg₂(NO₃)₂ and H₂SeO₃ solutions and were grown by a diffusion technique. All crystal structures were solved and refined from single crystal diffractometer data sets and are based on Hg₂²⁺ dumbbells and trigonal pyramidal SeO₃²⁻ anions as the main building units. A common structural feature of all modifications is the formation of open channels extending parallel to the shortest crystallographic axis. The non-bonding orbitals of the Se^IV atoms are stereochemically active and protrude into the channels. Upon heating in an open system under N₂ atmosphere, both α- and β-Hg₂SeO₃ decompose in a well-separated three-step mechanism. The first step (T > 250°C) involves disproportionation into elementary mercury and α-HgSeO₃ which at ca. 400°C subsequently transforms into β-HgSeO₃. The second step between T = 400 and 500°C is accompanied by a loss of Hg and SeO₂ and the formation of the basic salt Hg₃SeO₆. In the third step, at temperatures between T = 500° and 600°C, this material decomposes completely. Upon heating in a closed system (sealed silica capillaries), β-Hg₂SeO₃ transforms between 320-340°C into the more dense α-Hg₂SeO₃ which on further heating likewise converts into elementary mercury and β-HgSeO₃.     

Volumetric Properties for the Electrolyte (NaCl,NaBr and NaI) Monosaccharide (D‐Mannose and D‐Ribose)‐Water Systems at 298.15 K

Densities have been measured for the electrolyte (NaCl, NaBr and NaI)‐monosaccharide (D ‐mannose and D‐ribose)‐water solutions at 298.15 K. These data have been used to calculate the apparent molar volumes of the saccharides (V_Φ,S) and electrolytes (V_Φ,E) in the studied solutions. Infinite dilution apparent molar volumes, V_Φ,S⁰ and V_Φ,E⁰, have been evaluated, together with the standard transfer volumes of the saccharides (Δ_tV_S⁰) from water to aqueous electrolyte solutions and those of the electrolytes (Δ_tV_E⁰) from water to aqueous saccharide solutions. It was shown that both the Δ_tV_S⁰ and Δ_tV_E⁰ values are positive and increase with increasing molalities of sodium halides and saccharides, respectively. Overall, the Δ_tV_S⁰ and Δ_tV_E⁰ values have the order of NaCl > NaBr > NaI except for NaI‐ribose and NaI‐ribose. Volumetric interaction parameters for the electrolyte‐monosaccharide pairs in water were obtained and interpreted by the stereochemistry of the monosaccharide molecules and the structural interaction model.     

Thermal behavior and thermal safety on 3,3-dinitroazetidinium salt of perchloric acid

3,3-Dinitroazetidinium (DNAZ) salt of perchloric acid (DNAZ·HClO₄) was prepared, it was characterized by the elemental analysis, IR, NMR, and a X-ray diffractometer. The thermal behavior and decomposition reaction kinetics of DNAZ·HClO₄ were investigated under a non-isothermal condition by DSC and TG/DTG techniques. The results show that the thermal decomposition process of DNAZ·HClO₄ has two mass loss stages. The kinetic model function in differential form, the value of apparent activation energy (E _a) and pre-exponential factor (A) of the exothermic decomposition reaction of DNAZ·HClO₄ are f(α) = (1 − α)⁻¹/2, 156.47 kJ mol⁻¹, and 10^15.12 s⁻¹, respectively. The critical temperature of thermal explosion is 188.5 °C. The values of ΔS ^≠, ΔH ^≠, and ΔG ^≠of this reaction are 42.26 J mol⁻¹ K⁻¹, 154.44 kJ mol⁻¹, and 135.42 kJ mol⁻¹, respectively. The specific heat capacity of DNAZ·HClO₄ was determined with a continuous C _p mode of microcalorimeter. Using the relationship between C _p and T and the thermal decomposition parameters, the time of the thermal decomposition from initiation to thermal explosion (adiabatic time-to-explosion) was evaluated as 14.2 s.     

Synthesis and crystal structure of the A6B5O18 perovskite-like compounds

New members of the A_nB_n−1O_3n perovskite-like family (Ba₅KNb₅O₁₈ and Sr₆Nb₄SnO₁₈ compounds) with n = 6 have been synthesized and studied by the X-ray powder diffraction. Their crystal structures were found to belong to the Ba₆Nb₄TiO₁₈-type with a = 0.57840(7) nm, c = 4.2532(5) nm and a = 0.5661(1) nm, c = 4.186(1) nm for Ba₅KNb₅O₁₈ and Sr₆Nb₄SnO₁₈, respectively. It was shown that Ba and K (A-atoms) are completely disordered in the crystal structure of Ba₅KNb₅O₁₈ compound. But Nb and Sn atoms (B-atoms) in the crystal structure of the Sr₆Nb₄SnO₁₈ compound are quite ordered with the preferred Sn⁺⁴ and Nb⁵⁺ cations localization in the center of perovskite-like block and on the boundaries of these blocks, respectively. Temperature and frequency dependencies of the real components of electric conductivity σ^I and dielectric permeability ɛ^I; specific electric conductivity at the direct current σ_dc have been obtained by the impedance spectroscopy method for Sr₆Nb₄SnO₁₈.     

Ag2Se-Tl2Se-Bi2Se3 quasi-ternary system

The Ag₂Se-Tl₂Se-Bi₂Se₃ quasi-ternary system (system A) was studied using DTA, X-ray powder diffraction, microstructure examination, and microhardness measurements. TlBiSe₂-AgBiSe₂, AgTlSe-AgBiSe₂, AgTlSe-Bi₂Se₃, and Tl₂Se-AgBiSe₂ polytherms, isothermal sections at 500 and 800 K, and liquidus surface projection of system A were constructed. System A is congruently triangulated into the following subordinate triangles: Tl₂Se-AgTlSe-Tl₉BiSe₆ (I), AgTlSe-Tl₉BiSe₆-TlBiSe₂ (II), Ag₂Se-AgTlSe-TlBiSe₂ (III), Ag₂Se-AgBiSe₂-TlBiSe₂ (IV), and AgBiSe₂-TlBiSe₂-Bi₂Se₃ (V). Subsystems I, III, and V are ternary systems with three-phase eutectic equilibrium; system II has a three-phase eutectic, and system IV is characterized by several invariant and monovariant peritectic and eutectic equilibria. Primary crystallization and homogeneity fields were outlined, and the types and coordinates of invariant and monovariant equilibria in system A were determined. A characteristic feature of the title system is an extensive field of solid solutions between high-temperature cubic AgBiSe₂ and TlBiSe₂ phases; this field lies as a continuous belt along the AgBiSe₂-TlBiSe₂ quasibinary section and covers about one-fourth of the surface area of the triangular diagram of system A.