Synthesis, structure, and thermochemistry of the formation of the metal-metal bonded dimers [Mo(mu-TeAr)(CO)3(PiP3)]2 (Ar = phenyl, naphthyl) by phosphine elimination from *Mo(TePh)(CO)3(PiPr3)2

The complexes (*TeAr)Mo(CO)3(PiPr3)2 (Ar = phenyl, naphthyl; iPr = isopropyl) slowly eliminate PiPr3 at room temperature in a toluene solution to quantitatively form the dinuclear complexes [Mo(mu-TeAr)(CO)3(PiPr3)]2. The crystal structure of [Mo(mu-Te-naphthyl)(CO)3(PiPr3)]2 is reported and has a Mo-Mo distance of 3.2130 A. The enthalpy of dimerization has been measured and is used to estimate a Mo-Mo bond strength on the order of 30 kcal mol-1. Kinetic studies show the rate of formation of the dimeric chalcogen bridged complex is best fit by a rate law first order in (*TeAr)Mo(CO)3(PiPr3)2 and inhibited by added PiPr3. The reaction is proposed to occur by initial dissociation of a phosphine ligand and not by radical recombination of 2 mol of (*TeAr)Mo(CO)3(PiPr3)2. Reaction of (*TePh)Mo(CO)3(PiPr3)2, with L = pyridine (py) or CO, is rapid and quantitative at room temperature to form PhTeTePh and Mo(L)(CO)3(PiPr3)2, in keeping with thermochemical predictions. The rate of reaction of (*TeAr)W(CO)3(PiPr3)2 and CO is first-order in the metal complex and is proposed to proceed by the associative formation of the 19 e- radical complex (*TePh)W(CO)4(PiPr3)2 which extrudes a *TePh radical.     

Synthesis, spectroscopic, and structural investigation of the cyclic [N(PR2E)2]+ cations (E = Se, Te; R = iPr, Ph): the effect of anion and R-group exchange

Two-electron oxidation of the [N(PiPr2E)2]- anion with iodine produces the cyclic [N(PiPr2E)2]+ (E =Se, Te) cations, which exhibit long E-E bonds in the iodide salts [N(PiPr2Se)2]I (4) and [N(PiPr2Te)2]I (5). The iodide salts 4 and 5 are converted to the ion-separated salts [N(PiPr2Se)2]SbF6 (6) and [N(PiPr2Te)2]SbF6 (7) upon treatment with AgSbF6. Compounds 4-7 were characterized in solution by multinuclear NMR, vibrational, and UV-visible spectroscopy supported by DFT calculations. A structural comparison of salts 4-7 and [N(PiPr2Te)2]Cl (8) confirms that the long E-E bonds in 4, 5, and 8 can be attributed primarily to the donation of electron density from a lone pair of the halide counterion into the E-E sigma* orbital (LUMO) of the cation. The phenyl derivative [N(PPh2Te)2]I (9) was prepared in a similar manner. However, the attempted synthesis of the selenium analogue, [N(PPh2Se)2]I, produced a 1:1 mixture of [N(PPh2Se)2(mu-Se)][I] (10) and [SeP(Ph2)N(Ph2)PI] (11). DFT calculations of the formation energies of 10 and 11 support the observed decomposition. Compound 10 is a centrosymmetric dimer in which two six-membered NP2Se3 rings are bridged by two I- anions. Compound 11 produces the nine-atom chain {[N(PPh2)2Se]2(mu-O)} (12) upon hydrolysis during crystallization. The reaction between [(TMEDA)NaN(PiPr2Se)2] and SeCl2 in a 1:1 molar ratio yields the related acyclic species [SeP(iPr2)N(iPr2)PCl] (13), which was characterized by multinuclear NMR spectroscopy and an X-ray structural determination.     

Reactivity of the inversely polarized phosphaalkenes RP=C(NMe2)2 (R = tBu, Me3Si, H) towards arylcarbene complexes [(CO)5M=C(oEt)Ar] (Ar= Ph, M = Cr, W; Ar = 2-MeC6H4, 2-MeOC6H4, M = W)

The reaction of the arylated Fischer carbene complexes [(CO)5M=C(OEt)Ar] (Ar=Ph; M = Cr, W; 2-MeC6H4; 2-MeOC6H; M = W) with the phosphaalkenes RP=C(NMe2), (R=tBu, SiMe3) afforded the novel phosphaalkene complexes [[RP=C(OEt)Ar]M(CO)5] in addition to the compounds [(RP=C(NMe2)2]M(CO)5]. Only in the case of the R = SiMe3 (E/Z) mixtures of the metathesis products were obtained. The bis(dimethylamino)methylene unit of the phosphaalkene precursor was incorporated in olefins of the type (Me2N)2C=C(OEt)(Ar). Treatment of [(CO)5W=C(OEt)(2-MeOC6H4)] with HP=C(NMe2)2 gave rise to the formation of an E/Z mixture of [[(Me2N)2CH-P=C(OEt)(2-MeOC6H4)]W(CO)5] the organophosphorus ligand of which formally results from a combination of the carbene ligand and the phosphanediyl [P-CH(NMe2)2]. The reactions reported here strongly depend on an inverse distribution of alpha-electron density in the phosphaalkene precursors (Pdelta Cdelta+), which renders these molecules powerfu] nucleophiles.     

Ligand rotation in [Ar(R)N]3M-N2-M'[N(R)Ar]3(M, M' = MoIII, NbIII; R = iPr and tBu) dimers

Earlier calculations on the model N2-bridged dimer (micro-N2)-{Mo[NH2]3}2 revealed that ligand rotation away from a trigonal arrangement around the metal centres was energetically favourable resulting in a reversal of the singlet and triplet energies such that the singlet state was stabilized 13 kJ mol(-1) below the D(3d) triplet structure. These calculations, however, ignored the steric bulk of the amide ligands N(R)Ar (R =iPr and tBu, Ar = 3,5-C6H3Me2) which may prevent or limit the extent of ligand rotation. In order to investigate the consequences of steric crowding, density functional calculations using QM/MM techniques have been performed on the Mo(III)Mo(III) and Mo(III)Nb(III) intermediate dimer complexes (mu-N(2))-{Mo[N(R)Ar]3}2 and [Ar(R)N]3Mo-(mu-N2)-Nb[N(R)Ar]3 formed when three-coordinate Mo[N(R)Ar]3 and Nb[N(R)Ar]3 react with dinitrogen. The calculations indicate that ligand rotation away from a trigonal arrangement is energetically favourable for all of the ligands investigated and that the distortion is largely electronic in origin. However, the steric constraints of the bulky amide groups do play a role in determining the final orientation of the ligands, in particular, whether the ligands are rotated at one or both metal centres of the dimer. Analogous to the model system, QM/MM calculations predict a singlet ground state for the (mu-N2)-{Mo[N(R)Ar]3}2 dimers, a result which is seemingly at odds with the experimental triplet ground state found for the related (mu-N2)-{Mo[N(tBu)Ph]3}2 system. However, QM/MM calculations on the (mu-N2)-{Mo[N(tBu)Ph]3}2 dimer reveal that the singlet-triplet gap is nearly 20 kJ mol(-1) smaller and therefore this complex is expected to exhibit very different magnetic behaviour to the (mu-N2)-{Mo[N(R)Ar]3}2 system.     

Metallo(alkyl)chlorophosphanes Cp(CO)3 M-P(R)CI (M=Mo,W; R=Me,Ph, tBu,C5Me5) - Novel Sources for Phosphinidenes

Abstract

Metallation of organodichlorophosphanes RPC1₂ (R=Me, Ph, tBu, C₅Me₅) with Na[M(CO)₃Cp] (M=Mo, W) in benzene yields the thermolabile Metallo(alkyl)chlorophosphanes la-g. In solution la-d show a high tendency to decompose to the corresponding metal chloride Cp(CO)₃M-Cl with phosphinidene elimination. The rate of decomposition depends on the metal and the phosphorus ligand (Mo > W, Me > Ph > tBu C₅Me₅)     

Preparation and properties of the full series of cuboidal clusters [Mo(x)W4-xSe4(H2O)12]n+ (n = 4-6) and their derivatives

Hydrothermal reactions between incomplete cuboidal cluster aqua complexes [M3Q4(H2O)9]4+ and M(CO)6 (M = Mo, W; Q = S, Se) offer easy access to the corresponding cuboidal clusters M4Q4. The complete series of homometal and mixed Mo/W clusters [Mo(x)W4-xQ4(H2O)12]n+ (x = 0-4, n = 4-6) has been prepared. Upon oxidation of the mixed-metal clusters, it is the W atom which is lost, allowing selective preparation of new trinuclear clusters [Mo2WSe4(H2O)9]4+ and [MoW2Se4(H2O)9]4+. The aqua complexes were converted by ligand exchange reactions into dithiophosphato and thiocyanato complexes, and crystal structures of [W4S4((EtO)2PS2)6], [MoW3S4((EtO)2PS2)6], [Mo4Se4((EtO)2PS2)6], [W4Se4((i-PrO)2PS2)6], and (NH4)6[W4Se4(NCS)12]-4H20 were determined. Cyclic voltammetry was performed on [Mo(x)W4-xCO4(H2O)12]n+, showing reversible redox waves 6+/5+ and 5+/4+. The lower oxidation states are more difficult to access as the number of W atoms increases. The [Mo2WSe4(H2O)9]4+ and [MoW2Se4(H2O)9]4+ species were derivatized into [Mo2WSe4(acac)3(py)3]+ and [MoW2Se4(acac)3(py)3]+, which were also studied by CV. When appropriate, the products were also characterized by FAB-MS and NMR (31P, 1H) data.     

Photochemical reactions of metal carbonyls [M(CO)6 (M = Cr,Mo and W), Re(CO)5Br,Mn(CO)3Cp] with 2-hydroxyacetophenone methanesulfonylhydrazone (apmsh)

Five new complexes, [M(CO)₅(apmsh)] [M = Cr; (1), Mo; (2), W; (3)], [Re(CO)₄Br(apmsh)] (4) and [Mn(CO)₃(apmsh)] (5) have been synthesized by the photochemical reaction of metal carbonyls [M(CO)₆] (M = Cr, Mo and W), [Re(CO)₅Br], and [Mn(CO)₃Cp] with 2-hydroxyacetophenone methanesulfonylhydrazone (apmsh). The complexes have been characterized by elemental analysis, mass spectrometry, f.t.-i.r. and ¹H spectroscopy. Spectroscopic studies show that apmsh behaves as a monodentate ligand coordinating via the imine N donor atom in [M(CO)₅(apmsh)] (1–4) and as a tridentate ligand in (5).     

P2 addition to terminal phosphide M[triple bond]P triple bonds: a rational synthesis of cyclo-P3 complexes

The diphosphaazide complex (Mes*NPP)Nb(N[Np]Ar)3 (Mes* = 2,4,6-tri-tert-butylphenyl, Np = neopentyl, Ar = 3,5-Me2C6H3), 1, has previously been reported to lose the P2 unit upon gentle heating, to form (Mes*N)Nb(N[Np]Ar)3, 2. The first-order activation parameters for this process have been estimated here using an Eyring analysis to have the values Delta H(double dagger) = 19.6(2) kcal/mol and Delta S(double dagger) = -14.2(5) eu. The eliminated P2 unit can be transferred to the terminal phosphide complexes P[triple bond]M(N[(i)Pr]Ar)3, 3-M (M = Mo, W), and [P[triple bond]Nb(N[Np]Ar)3](-), 3-Nb, to give the cyclo-P3 complexes (P3)M(N[(i)Pr]Ar)3 and [(P3)Nb(N[Np]Ar)3](-). These reactions represent the formal addition of a P[triple bond]P triple bond across a M[triple bond]P triple bond and are the first efficient transfers of the P2 unit to substrates present in stoichiometric quantities. The related complex (OC)5W(Mes*NPP)Nb(N[Np]Ar)3, 1-W(CO)5, was used to transfer the (P2)W(CO)5 unit in an analogous manner to the substrates 3-M (M = Mo, W, Nb) as well as to [(OC)5WP[triple bond]Nb(N[Np]Ar)3](-). The rate constants for the fragmentation of 1 and 1-W(CO)5 were unchanged in the presence of the terminal phosphide 3-Mo, supporting the hypothesis that molecular P2 and (P2)W(CO)5, respectively, are reactive intermediates. In a reaction related to the combination of P[triple bond]P and M[triple bond]P triple bonds, the phosphaalkyne AdC[triple bond]P (Ad = 1-adamantyl) was observed to react with 3-Mo to generate the cyclo-CP2 complex (AdCP2)Mo(N[(i)Pr]Ar)3. Reactions of the electrophiles Ph3SnCl, Mes*NPCl, and AdC(O)Cl with the anionic, nucleophilic complexes [(OC)5W(P3)Nb(N[Np]Ar)3](-) and [{(OC)5W}2(P3)Nb(N[Np]Ar)3](-) yielded coordinated eta(2)-triphosphirene ligands. The Mes*NPW(CO)5 group of one such product engages in a fluxional ring-migration process, according to NMR spectroscopic data. The structures of (OC)5W(P3)W(N[(i)Pr]Ar)3, [(Et2O)Na][{(OC)5W}2(P3)Nb(N[Np]Ar)3], (AdCP2)Mo(N[(i)Pr]Ar)3, (OC)5W(Ph3SnP3)Nb(N[Np]Ar)3, Mes*NP(W(CO)5)P3Nb(N[Np]Ar)3, and {(OC)5W}2AdC(O)P3Nb(N[Np]Ar)3, as determined by X-ray crystallography, are discussed in detail.     

Synthesis and structures of Mo3Se7Te2Br10, Mo3Se7TeI6, and Mo6Te21I22 containing TeX3- (X=Br, I) ligands coordinated to a triangular cluster core

New ternary and quaternary molybdenum cluster chalcohalides were obtained by high-temperature reactions between Mo, chalcogens, and halogens in evacuated ampules. The crystal structures of [Mo3Se7(TeBr3)Br2]2[Te2Br10] (1), [Mo3Se7(TeI3)I2]I (2), and [Mo3Te7(TeI3)3]2(I)(TeI3) (3) were determined by single-crystal X-ray diffraction. The structures of 1 and 2 consist of positively charged zigzag chains infinity1 [Mo3Se7(TeX3)X4/2] (X=Br, I), with Te2Br102- and I-, respectively, as counterions. The TeI3- and TeBr3- ions function as bidentate ligands in 1 and 2. In 3, TeI3- is not coordinated to the metal but acts as a counterion to the [Mo3Te7(TeI3)3]+ cluster cation.     

Synthesis, isolation, and characterization of trisodium tricarbonyliridate (3-), Na3[Ir(CO)3]. Initial studies on its derivative chemistry and structural characterizations of trans-[Ir(CO)3(EPh3)2](-), E = Ge, Sn, and trans-[Co(CO)3(SnPh3)2](-1)

Reduction of Na[Ir(CO)4] by sodium metal in (Me2N)3PO, followed by treatment with liquid ammonia, provided high yields (ca. 90%) of unsolvated Na3[Ir(CO)3], a thermally stable, pyrophoric orange solid. This substance contains iridium in its lowest known formal oxidation state of -3 and has been characterized by IR spectroscopy, elemental analyses, and derivative chemistry, i.e., by its conversion to the triphenylgermyl and triphenylstannyl complexes, trans-[Ir(CO)3(EPh3)2](-), E = Ge, Sn. Single-crystal X-ray structures of the tetraethylammonium salts of these species, as well as [Co(CO)3(SnPh3)2](-), confirm the trigonal bipyramidal nature of the anions, originally predicted on the basis of their IR spectra in the carbonyl stretching frequency region. These structural characterizations provide important additional evidence for the presence of metal tricarbonyl units in Na3[M(CO)3], M = Co, Ir.     

Molybdenum chalcogenobenzimidato complexes: radical synthesis and nitrile extrusion via beta-EPh (E = S, Se, and Te) elimination

Molybdenum chalcogenobenzimidates of formula (Ph[PhE]C=N)Mo(N[t-Bu]Ar)(3) (Ar = 3,5-C(6)H(3)Me(2)) have been obtained by treatment of Mo(N[t-Bu]Ar)(3) sequentially with benzonitrile and 0.5 equiv of PhEEPh (E = S, Se, and Te). Molecular structure determinations have been carried out for the S and Se variants. The Te variant extrudes PhCN forming structurally characterized (PhTe)Mo(N[t-Bu]Ar)(3) with facility assessed via stopped-flow kinetic measurements, while the Se and S analogues exhibit increasing stability. Quantum chemical calculations and solution calorimetry have been employed as an aid to interpretation of the PhCN extrusion reaction.     

Optimizing small molecule activation and cleavage in three-coordinate M[N(R)Ar]3 complexes

The sterically hindered, three-coordinate metal systems M[N(R)Ar]3 (R = tBu, iPr; Ar = 3,5-C6H3Me2) are known to bind and activate a number of fundamental diatomic molecules via a [Ar(R)N]3M-L-L-M[N(R)Ar]3 dimer intermediate. To predict which metals are most suitable for activating and cleaving small molecules such as N(2), NO, CO, and CN(-), the M-L bond energies in the L-M(NH2)3 (L = O, N, C) model complexes were calculated for a wide range of metals, oxidation states, and dn (n = 2-6) configurations. The strongest M-O, M-N, and M-C bonds occurred for the d2, d3, and d4 metals, respectively, and for these d(n) configurations, the M-C and M-O bonds were calculated to be stronger than the M-N bonds. For isoelectronic metals, the bond strengths were found to increase both down a group and to the left of a period. Both the calculated N-N bond lengths and activation barriers for N2 bond cleavage in the (H2N)3M-N-N-M(NH2)3 intermediate dimers were shown to follow the trends in the M-N bond energies. The three-coordinate complexes of Ta(II), W(III), and Nb(II) are predicted to deliver more favorable N2 cleavage reactions than the experimentally known Mo(III) system and the Re(III)Ta(III) dimer, [Ar(R)N]3Re-CO-Ta[N(R)Ar]3, is thermodynamically best suited for cleaving CO.     

Cluster oxalate complexes [M3(mu3-Q)(mu2-Q2)3(C2O4)3]2- and [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2- (M = Mo, W; Q = S, Se): mechanochemical synthesis and crystal structure

Mechanochemical reaction of cluster coordination polymers 1infinity[M3Q7Br4] (M = Mo, W; Q = S, Se) with solid K2C2O4 leads to cluster core excision with the formation of anionic complexes [M3Q7(C2O4)3]2-. Extraction of the reaction mixture with water followed by crystallization gives crystalline K2[M3Q7(C2O4)3].0.5KBr.nH2O (M = Mo, Q = S, n = 3 (1); M = Mo, Q = Se, n = 4 (2); M = W, Q = S, n = 5 (3)). Cs2[Mo3S7(C2O4)3].0.5CsCl.3.5H2O (4) and (Et4N)1.5H0.5K{[Mo3S7(C2O4)3]Br}.2H2O (5) were also prepared. Close Q...Br contacts result in the formation of ionic triples {[M3Q7(C2O4)3](2)Br}5- in 1-4 and the 1:1 adduct {[Mo3S7(C2O4)3]Br}3- in 5. Treatment of 1 or 2 with PPh(3) leads to chalcogen abstraction with the formation of [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2-, isolated as (Ph4P)2[Mo3(mu3-S)(mu2-S)3(C2O4)3(H2O)3].11H2O (6) and (Ph4P2[Mo3(mu3-Se)(mu2-Se)3(C2O4)3(H2O)3].8.5H2O.0.5C2H5OH (7). All compounds were characterized by X-ray structure analysis. IR, Raman, electronic, and 77Se NMR spectra are also reported. Thermal decomposition of 1-3 was studied by thermogravimetry.     

New Routes to a Series of σ‐Borane/Borate Complexes of Molybdenum and Ruthenium

A series of agostic σ‐borane/borate complexes have been synthesized and structurally characterized from simple borane adducts. A room‐temperature reaction of [Cp*Mo(CO)₃Me], 1 with Li[BH₃(EPh)] (Cp*=pentamethylcyclopentadienyl, E=S, Se, Te) yielded hydroborate complexes [Cp*Mo(CO)₂(μ‐H)BH₂EPh] in good yields. With 2‐mercapto‐benzothiazole, an N,S‐carbene‐anchored σ‐borate complex [Cp*Mo(CO)₂BH₃(1‐benzothiazol‐2‐ylidene)] ( 5 ) was isolated. Further, a transmetalation of the B‐agostic ruthenium complex [Cp*Ru(μ‐H)BHL₂] ( 6 , L=C₇H₄NS₂) with [Mn₂(CO)₁₀] affords a new B‐agostic complex, [Mn(CO)₃(μ‐H)BHL₂] ( 7 ) with the same structural motif in which the central metal is replaced by an isolobal and isoelectronic [Mn(CO)₃] unit. Natural‐bond‐orbital analyses of 5–7 indicate significant delocalization of the electron density from the filled σ_B?H orbital to the vacant metal orbital.     

A family of oxo-chalcogenide molybdenum and tungsten complexes, (n-Bu4N)2[M2O2(mu-Q)2(1,3-dithiole-2-thione-4,5-dithiolate)2] (M = Mo, W; Q = S, Se): new synthetic entries, structure, and gas-phase behavior

A new series of complexes with the general formula (n-Bu4N)2[M2O2(micro-Q)2(dmit)2] (where M = Mo, W; Q = S, Se; dmit = 1,3-dithiole-2-thione-4,5-dithiolate) have been prepared. Fragmentation of the trinuclear cluster (n-Bu4N)2[Mo3(micro3-S)(micro-S2)3(dmit)3] in the presence of triphenylphosphine (PPh3) gives the dinuclear compound (n-Bu4N)2[Mo2O2(micro-S)2(dmit)2] [(n-Bu4N)2[2]], which is formed via oxidation in air from the intermediate (n-Bu4N)2[Mo3(micro3-S)(micro-S)3(dmit)3] [(n-Bu4N)2[1]] complex. Ligand substitution of the molybdenum sulfur bridged [Mo2O2(micro-S)2(dimethylformamide)6]2+ dimer with the sodium salt of the dmit dithiolate also affords the dianionic compound (n-Bu4N)2[2]. The whole series, (n-Bu4N)2[Mo2O2(micro-Se)2(dmit)2] [(n-Bu4N)2[3]], (n-Bu4N)2[W2O2(micro-S)2(dmit)2] [(n-Bu4N)2[4]], (n-Bu4N)2[W2O2(micro-Se)2(dmit)2] [(n-Bu4N)2[5]], and (n-Bu4N)2[Mo2O2(micro-S)2(dmid)2] [(n-Bu4N)2[6]; dmid = 1,3-dithiole-2-one-4,5-dithiolate], has been synthesized by the excision of the polymeric (Mo3Q7Br4)x phases with PPh3 or 1,2-bis(diphenylphosphanyl)ethane in acetonitrile followed by the dithiolene incorporation and further degradation in air. Direct evidence of the presence of the intermediates with the formula [M3Q4(dmit)3]2- (M = Mo, W; Q = S, Se) has been obtained by electrospray ionization mass spectrometry. The crystal structures of (n-Bu4N)2[1], (PPh4)2[Mo2O2(micro-S)2(dmit)2] [(PPh4)2[2]; PPh4 = tetraphenylphosphonium], (n-Bu4N)2[2], (n-Bu4N)2[4], (PPh4)2[W2O2(micro-Se)2(dmit)2] [(PPh4)2[5]], and (n-Bu4N)2[6] have been determined. A detailed study of the gas-phase behavior for compounds (n-Bu4N)2[2-6] shows an identical fragmentation pathway for the whole family that consists of a partial breaking of the two dithiolene ligands followed by the dissociation of the dinuclear cluster.     

Synthesis, NMR characterisation and X-ray structures of mixed chalcogenido PNP ligands containing tellurium: crystal structures of SeiPr2PNP(H)iPr2 and [NaN(EPiPr2)2]infinity (E = Se, Te)

Reaction of HN(PiPr2)2 with one equivalent of selenium in hexane at room temperature yields the monoselenide as the P-H tautomer Se=PiPr2-N=P(H)iPr2 (2b). Deprotonation of 2b with n butyllithium in the presence of TMEDA at -78 degrees C followed by addition of tellurium produces the air-sensitive, mixed chalcogenido complex [(TMEDA)Li(SePiPr2)(TePiPr2)N] (8Li) in >97% purity after recrystallisation. Similarly, deprotonation of Te=PiPr2-N=P(H)iPr2 (2c), followed by addition of sulfur, gives the sulfur analogue [(TMEDA)Li(SPiPr2)(TePiPr2)N] (7Li) in >99% purity. The symmetrical complexes [(TMEDA)Li(SePiPr2)2N] (4Li) and [(TMEDA)Li(TePiPr2)2N] (5Li) are produced by similar methods. Compounds 2b, 4Li, 5Li, 7Li and 8Li were characterised in solution by multinuclear (1H, 31P, 77Se and 125Te) NMR spectroscopy and their solid-state structures were determined by X-ray crystallography. The X-ray crystal structures of the polymeric chains [NaN(EPiPr2)2]infinity (4Na, E = Se and 5Na, E = Te) are also reported.     

Structural consequences of the one-electron reduction of d4 [Mo(CO)2(eta-PhC[triple bond]CPh)Tp']+ and the electronic structure of the d5 radicals [M(CO)L(eta-MeC[triple bond]CMe)Tp'] {L = CO and P(OCH2)3CEt}

Reduction of [M(CO)2(eta-RC[triple bond]CR')Tp']X {Tp' = hydrotris(3,5-dimethylpyrazolyl)borate, M = Mo, X = [PF6]-, R = R' = Ph, C6H4OMe-4 or Me; R = Ph, R' = H; M = W, X = [BF4]-, R = R' = Ph or Me; R = Ph, R' = H} with [Co(eta-C5H5)2] gave paramagnetic [M(CO)2(eta-RC[triple bond]CR')Tp'], characterised by IR and ESR spectroscopy. X-Ray structural studies on the redox pair [Mo(CO)2(eta-PhC[triple bond]CPh)Tp'] and [Mo(CO)2(eta-PhC[triple bond]CPh)Tp'][PF6] showed that oxidation is accompanied by a lengthening of the C[triple bond]C bond and shortening of the Mo-C(alkyne) bonds, consistent with removal of an electron from an orbital antibonding with respect to the Mo-alkyne bond, and with conversion of the alkyne from a three- to a four-electron donor. Reduction of [Mo(CO)(NCMe)(eta-MeC[triple bond]CMe)Tp'][PF6] with [Co(eta-C5H5)2] in CH2Cl2 gives [MoCl(CO)(eta-MeC[triple bond]CMe)Tp'], via nitrile substitution in [Mo(CO)(NCMe)(eta-MeC[triple bond]CMe)Tp'], whereas a similar reaction with [M(CO){P(OCH2)3CEt}(eta-MeC[triple bond]CMe)Tp']+ (M = Mo or W) gives the phosphite-containing radicals [M(CO){P(OCH2)3CEt}(eta-MeC[triple bond]CMe)Tp']. ESR spectroscopic studies and DFT calculations on [M(CO)L(eta-MeC[triple bond]CMe)Tp'] {M = Mo or W, L = CO or P(OCH2)3CEt} show the SOMO of the neutral d5 species (the LUMO of the d4 cations) to be largely d(yz) in character although much more delocalised in the W complexes. Non-coincidence effects between the g and metal hyperfine matrices in the Mo spectra indicate hybridisation of the metal d-orbitals in the SOMO, consistent with a rotation of the coordinated alkyne about the M-C2 axis.     

Thermodynamic, kinetic, and computational study of heavier chalcogen (S, Se, and Te) terminal multiple bonds to molybdenum, carbon, and phosphorus

Enthalpies of chalcogen atom transfer to Mo(N[t-Bu]Ar)3, where Ar = 3,5-C6H3Me2, and to IPr (defined as bis-(2,6-isopropylphenyl)imidazol-2-ylidene) have been measured by solution calorimetry leading to bond energy estimates (kcal/mol) for EMo(N[t-Bu]Ar)3 (E = S, 115; Se, 87; Te, 64) and EIPr (E = S, 102; Se, 77; Te, 53). The enthalpy of S-atom transfer to PMo(N[ t-Bu]Ar) 3 generating SPMo(N[t-Bu]Ar)3 has been measured, yielding a value of only 78 kcal/mol. The kinetics of combination of Mo(N[t-Bu]Ar)3 with SMo(N[t-Bu]Ar)3 yielding (mu-S)[Mo(N[t-Bu]Ar)3]2 have been studied, and yield activation parameters Delta H (double dagger) = 4.7 +/- 1 kcal/mol and Delta S (double dagger) = -33 +/- 5 eu. Equilibrium studies for the same reaction yielded thermochemical parameters Delta H degrees = -18.6 +/- 3.2 kcal/mol and Delta S degrees = -56.2 +/- 10.5 eu. The large negative entropy of formation of (mu-S)[Mo(N[t-Bu]Ar)3]2 is interpreted in terms of the crowded molecular structure of this complex as revealed by X-ray crystallography. The crystal structure of Te-atom transfer agent TePCy3 is also reported. Quantum chemical calculations were used to make bond energy predictions as well as to probe terminal chalcogen bonding in terms of an energy partitioning analysis.     

The cyclic [N(PiPr2E)2]+ (E = Se, Te) cations: a new class of inorganic ring system

The two-electron oxidation of [(tmeda)NaN(PiPr2E)2] with iodine produces the cyclic [N(PiPr2E)2]+ (E = Se, Te) cations, which exhibit long E-E bonds in the iodide salts.     

Thermodynamic and kinetic studies of H atom transfer from HMo(CO)3(eta(5)-C5H5) to Mo(N[t-Bu]Ar)3 and (PhCN)Mo(N[t-Bu]Ar)3: direct insertion of benzonitrile into the Mo-H bond of HMo(N[t-Bu]Ar)3 forming (Ph(H)C=N)Mo(N[t-Bu]Ar)3

Synthetic studies are reported that show that the reaction of either H2SnR2 (R = Ph, n-Bu) or HMo(CO)3(Cp) (1-H, Cp = eta(5)-C5H5) with Mo(N[t-Bu]Ar)3 (2, Ar = 3,5-C6H3Me2) produce HMo(N[t-Bu]Ar)3 (2-H). The benzonitrile adduct (PhCN)Mo(N[t-Bu]Ar)3 (2-NCPh) reacts rapidly with H2SnR2 or 1-H to produce the ketimide complex (Ph(H)C=N)Mo(N[t-Bu]Ar)3 (2-NC(H)Ph). The X-ray crystal structures of both 2-H and 2-NC(H)Ph are reported. The enthalpy of reaction of 1-H and 2 in toluene solution has been measured by solution calorimetry (DeltaH = -13.1 +/- 0.7 kcal mol(-1)) and used to estimate the Mo-H bond dissociation enthalpy (BDE) in 2-H as 62 kcal mol(-1). The enthalpy of reaction of 1-H and 2-NCPh in toluene solution was determined calorimetrically as DeltaH = -35.1 +/- 2.1 kcal mol(-1). This value combined with the enthalpy of hydrogenation of [Mo(CO)3(Cp)]2 (1(2)) gives an estimated value of 90 kcal mol(-1) for the BDE of the ketimide C-H of 2-NC(H)Ph. These data led to the prediction that formation of 2-NC(H)Ph via nitrile insertion into 2-H would be exothermic by approximately 36 kcal mol(-1), and this reaction was observed experimentally. Stopped flow kinetic studies of the rapid reaction of 1-H with 2-NCPh yielded DeltaH(double dagger) = 11.9 +/- 0.4 kcal mol(-1), DeltaS(double dagger) = -2.7 +/- 1.2 cal K(-1) mol(-1). Corresponding studies with DMo(CO)3(Cp) (1-D) showed a normal kinetic isotope effect with kH/kD approximately 1.6, DeltaH(double dagger) = 13.1 +/- 0.4 kcal mol(-1) and DeltaS(double dagger) = 1.1 +/- 1.6 cal K(-1) mol(-1). Spectroscopic studies of the much slower reaction of 1-H and 2 yielding 2-H and 1/2 1(2) showed generation of variable amounts of a complex proposed to be (Ar[t-Bu]N)3Mo-Mo(CO)3(Cp) (1-2). Complex 1-2 can also be formed in small equilibrium amounts by direct reaction of excess 2 and 1(2). The presence of 1-2 complicates the kinetic picture; however, in the presence of excess 2, the second-order rate constant for H atom transfer from 1-H has been measured: 0.09 +/- 0.01 M(-1) s(-1) at 1.3 degrees C and 0.26 +/- 0.04 M(-1) s(-1) at 17 degrees C. Study of the rate of reaction of 1-D yielded kH/kD = 1.00 +/- 0.05 consistent with an early transition state in which formation of the adduct (Ar[t-Bu]N)3Mo...HMo(CO)3(Cp) is rate limiting.