Rigidization,preorientation and electronic decoupling--the 'magic triangle' for the design of highly efficient fluorescent sensors and switches

One of the key interests in the recent development of fluorescent molecular sensors and switches is the realization of systems that show strong signal changes as a response to the chemical trigger. Aiming at rational probe design, this article compiles and compares different promising strategies to extract those supramolecular and photophysical features that allow the construction of molecular devices suitable for efficient signaling. The examples comprise fluorescence 'OFF'-'ON' as well as 'ON'-'OFF' operative systems and the mechanisms, properties, and limitations of the different design concepts are discussed.     

A Highly Selective Potassium Sensor for the Detection of Potassium in Living Tissues

The development of highly selective sensors for potassium is of great interest in biology. Two new hydrosoluble potassium sensors (Calix‐COU‐Alkyne and Calix‐COU‐Am) based on a calix[4]arene bis(crown‐6) and an extended coumarin were synthesized and characterized. The photophysical properties and complexation studies of these compounds have been investigated and show high molar extinction coefficients and high fluorescence quantum yields. Upon complexation with potassium in the millimolar concentration range, an increase of one‐ and two‐photon fluorescence emission is detected. A twofold fluorescence enhancement is observed upon excitation at λ=405 nm. The ligands present excellent selectivity for potassium in the presence of various competitive cations in water and in a physiological medium. The photophysical properties are not affected by the presence of a large amount of competing cations (Na⁺, Ca²⁺, Mg²⁺, etc.). Ex vivo measurements on mouse hippocampal slices show that Calix‐COU‐Alkyne accumulates extracellularly and does not alter the neuronal activity. Furthermore, the sensor can be utilized to monitor slow extracellular K⁺ increase induced by inhibition of K⁺ entry into the cells.     

Synthesis and characterization of zinc sensors based on a monosubstituted fluorescein platform

The synthesis of a new fluorescein carboxaldehyde asymmetrically substituted on the xanthene (top) ring is reported. This molecule is a key precursor for two of three monofunctionally derivatized fluorescein-based Zn(II) sensors presented in this work. Detailed preparative routes to, and photophysical characterization of, these sensors are described. The sensors are based on the previously reported ZP4 motif (Burdette, S. C.; Frederickson, C. J.; Bu, W.; Lippard, S. J. J. Am. Chem. Soc. 2003, 125, 1778-1787) and incorporate a di(2-picolyl)amine-containing aniline-derivatized ligand framework. By varying the nature of the substituent (X) para to the aniline nitrogen atom, which is responsible for PET quenching of the unbound ZP dye, we investigated the extent to which such electronic tuning might improve the fluorescent properties of asymmetrical ZP sensors. Although a comparison of probes with X = H, F, Cl, OMe reveals that the photophysical behavior of these dyes is not readily predictable, our methodology illustrates the ease with which aniline-based ligands may be linked to fluorescein dyes.     

Synthesis of benzanthron derivatives for selective detection by fluorescence of copper ions

The paper reports on the synthesis of two new benzanthron derivatives with intense yellow-orange fluorescence and their copolymers with styrene. The photophysical characteristics of the new low and high molecular weight fluorescent compounds have been studied in organic solvents of different polarity. The effect of the chemical nature of the C-3 substituent on the photophysical properties of the new dyes is discussed. The complexes formed between the benzanthron fluorophores and metal cations in solution have been studied with regard to potential applications as fluorescent sensors for metal ion contamination. The results show that the C-3 substituent determines a selective response to the presence of Cu²⁺ cations. In the case of copolymers the effect of the metal cations on the fluorescence intensity is negligible.     

Nondestructive Photoluminescence Read‐Out by Intramolecular Electron Transfer in a Perylene Bisimide‐Diarylethene Dyad

A novel, highly stable photochromic dyad 3 based on a perylene bisimide (PBI) fluorophore and a diarylethene (DAE) photochrome was synthesized and the optical and photophysical properties of this dyad were studied in detail by steady‐state and time‐resolved ultrafast spectroscopy. This photochromic dyad can be switched reversibly by UV‐light irradiation of its ring‐open form 3 o leading to the ring‐closed form 3 c , and back reaction of 3 c to 3 o by irradiation with visible light. Solvent‐dependent fluorescence studies revealed that the emission of ring‐closed form 3 c is drastically quenched in solvents of medium (e.g., chloroform) to high (e.g., acetone) polarities, while the emission of the ring‐open form 3 o is appreciably quenched only in highly polar solvents like DMF. The strong fluorescence quenching of 3 c is attributed to a photoinduced electron‐transfer (PET) process from the excited PBI unit to ring‐closed DAE moiety, as this process is thermodynamically highly favorable with a Gibbs free energy value of ?0.34 eV in dichloromethane. The electron‐transfer mechanism for the fluorescence quenching of ring‐closed 3 c is substantiated by ultrafast transient measurements in dichloromethane and acetone, revealing stabilization of charge‐separated states of 3 c in these solvents. Our results reported here show that the new photochromic dyad 3 has potential for nondestructive read‐out in write/read/erase fluorescent memory systems.     

Solvent polarity induced structural changes in 2,6-diamino-9,10-anthraquinone dye

Photophysical properties of 2,6-diamino-9,10-anthraquinone (2,6-DAAQ) dye have been investigated in different solvents and solvent mixtures. The fluorescence quantum yields, fluorescence lifetimes, radiative rate constants, nonradiative rate constants and absorption and fluorescence spectral characteristics show unusual deviations in the lower polarity aprotic solvents in comparison to those in other aprotic solvents of medium to higher polarities. The results indicate that the dye exists in different structural forms in the lower and in the medium to higher polarity solvents. Drawing an analogy with the results reported for other amino-substituted dyes, it is inferred that 2,6-DAAQ dye adopts a planar intramolecular charge transfer (ICT) structure in medium to higher polarity solvents, where the amino lone pairs are in good resonance with the anthraquinone pi-cloud. In the lower polarity solvents, however, the dye is inferred to exist in a nonplanar structure where the amino lone pairs are not in good resonance with the anthraquinone pi-cloud. Due to these structural differences, the dye displays significantly different photophysical behavior in the lower polarity solvents than in the other solvents of medium to higher polarities. Supportive evidence for the above structural changes has been obtained from ab initio quantum chemical calculations on the structures of the dye under different conditions. Unusual deviations in the photophysical properties of 2,6-DAAQ dye in protic solvents in comparison to those in aprotic solvents of similar polarities are attributed to the intermolecular hydrogen bonding effect involving the OH groups of the protic solvents and the quinonoid oxygens of the dye.     

Isothiocyanato boron dipyrromethenes--the first BODIPY analogues of fluorescein isothiocyanate

Two boron complexes of 5-phenyldipyrromethenes bearing isothiocyanate groups on the phenyl ring have been synthesized for the first time. The utility of these new fluorescence probes for labeling biologically relevant proteins is demonstrated on two monoclonal antibodies that bind to antigens overexpressed on cancer cells. Spectral comparison of the two structures reveals significant photophysical differences, including bathochromically shifted excitation and emission bands, increased molar absorptivity and a large increase in fluorescence quantum yield of approximately 10 times. Differences in photophysical parameters are linked to hindered rotation of the phenyl ring in one of the probes.     

基于有机硼化合物的氟离子化学传感器的研究进展

有机硼化合物中硼原子空的pπ轨道使其作为路易斯酸能够选择性的结合氟离子,其与氟离子的结合破坏了硼中心与芳香取代基的pπ-π共轭,引起有机硼化合物光物理性质的变化。因此,有机硼化合物能够用作高选择性的氟离子化学传感器材料。本文从具有三芳基硼结构及硼酸或硼酸酯结构的这两类有机硼化合物出发,综述了它们在氟离子化学传感器领域的研究进展。     

Highlights on the recent advances in gold chemistry--a photophysical perspective

The presence of inter- and/or intra-molecular aurophilic interactions among the closed-shell gold(i) centres in various systems has been studied from various aspects, including synthetic, spectroscopic and theoretical approaches. The employment of different ligands can impose a significant influence on these factors and give rise to new complexes with interesting structural and photophysical properties. In this tutorial review, a number of recent examples are selected to illustrate the fascinating properties and chemistry, as well as versatility of gold(i) in these aspects and their potential applications to newcomers in this field. An emerging class of luminescent gold(iii) complexes is also described.     

碳点的性质及其在生物传感器领域的应用

碳点(carbon dots,CDs)作为一种具有优良生物相容性、低毒性和表面功能可调的新型碳基纳米材料,在生物传感领域具有极大的应用潜力.本文对碳点的生物效应、发光性质及其发光机理进行了简述,并根据传感机制的不同,将CDs在生物传感领域的应用分为荧光(fluorescence,FL)传感器、电致发光(electrochemiluminescence,ECL)传感器以及化学发光(chemiluminescence,CL)传感器三类进行综述.最后分析了CDs目前在生物传感器领域应用中存在的问题,并对其发展进行了展望.     

Highly coupled dyads based on phthalocyanine-ruthenium(II) tris(bipyridine) complexes. Synthesis and photoinduced processes

A new series of multicomponent ZnPc-Ru(bpy)(3) systems, 1a-c, consisting of a zinc-phthalocyanine linked through conjugated and/or nonconjugated connections to a ruthenium(II) tris(bipyridine) complex, has been synthesized. The ruthenium complexes 1a-c were prepared from phthalocyanines 2a-c, bearing a 4-substituted-2,2'-bipyridine ligand by treatment with [Ru(bpy)2Cl2].2H2O. Different synthetic strategies have been devised to prepare the corresponding dyad precursors (2a-c). Compound 2a, for example, with an ethenyl bridge, was synthesized by statistical condensation of 4-tert-butylphthalonitrile and 5-[(E)-2-(3,4-dicyanophenyl)ethenyl]-2,2'-bipyridine (3) in the presence of zinc chloride. Compounds 2b and 2c, having, respectively, an amide or an ethynyl bridge, were prepared following a different synthetic approach. The method involves the coupling of an appropriate 5-substituted-2,2'-bipyridine to an unsymmetrical phthalocyanine suitably functionalized with an amino (4) or an ethynyl group (5). The photophysical properties of the dyads that are ZnPc-Ru(bpy)3 1a-c and related model compounds have been determined by a variety of steady-state (i.e., fluorescence) and time-resolved methods (i.e., fluorescence and transient absorption). Clearly, intramolecular electronic interactions between the two subunits dominate the photophysical events following the initial excitation of either chromophore. These intramolecular interactions lead, in the case of photoexcited ZnPc, to faster intersystem crossing kinetics compared to a ZnPc reference, while photoexcited [Ru(bpy)3]2+) undergoes a rapid and efficient transduction of triplet excited-state energy to the Pc.     

New lipophilic crown ethers with intraannular carboxylic acid groups: Synthesis and alkali metal cation extraction

A six‐step synthetic route to four lipophilic crown ethers with intraannular carboxylic acid groups and ring sizes of 15‐crown‐4, 18‐crown‐5, 21‐crown‐6 and 24‐crown‐7 is described. Eight new polyether compounds that bear inward‐facing bromo and formate ester substituents are prepared as synthetic intermediates. Selectivities and efficiencies of the four new lipophilic crown ether carboxylic acids in competitive alkali metal cation extraction from aqueous solutions into chloroform are evaluated.     

Metalloenzyme-Mediated Thiol-Yne Addition Towards Photoisomerizable Fluorescent Dyes

Proteins are able to irreversibly assemble biologically active ligands from building blocks bearing complementary reactive functions due their spatial proximity, through a kinetic target-guided synthetic process (also named in situ click chemistry). Although linkages thus formed are mostly passive, some of them have shown to significantly contribute to the protein binding through for instance hydrogen bonding and stacking interactions. Biocompatible reactions and click chemistry are a formidable source of inspiration for developing such new protein-directed ligations. This study reports a proximity-induced thiol-yne synthesis of carbonic anhydrase inhibitors. Not only this example widens the arsenal of kinetic target-guided synthesis (KTGS) eligible reactions, but the obtained product displayed unsuspected photophysical properties. The corresponding vinyl sulfide linkage conjugated to a coumarin core proved to be engaged in a monodirectional Z to E photoisomerization process. Further investigations guided by theoretical calculations showed that fine-tuning of the nature of the substituents on the coumarin moiety allows to obtain a bidirectional photochemical process, thus discovering a new photoswitching moiety, displaying moreover fluorescence properties. Due to the spectral tunability of coumarin derivatives, this work should open new opportunities for the design of vinyl sulfide-based photoswitch systems with modular photophysical properties.     

Design and applications of biomimetic anthraquinone dyes. III. Anthraquinone-immobilised C.I. reactive blue 2 analogues and their interaction with horse liver alcohol dehydrogenase and other adenine nucleotide-binding proteins

C.I. Reactive Blue 2 analogues were bonded onto an agarose support matrix by a novel method which entailed immobilisation by the anthraquinone ring 1-amino group as opposed to the usual triazine ring coupling methods. Dyes with spacer arms attached to the anthraquinone ring 1-amino group were synthesised by reacting methoxytriazine analogues of C.I. Reactive Blue 2 with chloroacetyl chloride and ethylenediamine. Unlike the blue parent dyes, all C.I. Reactive Blue 2 analogues with derivatised anthraquinone ring 1-amino groups were of a characteristic red colour. This change of chromaticity was entirely expected since the anthraquinone ring 1-amino group is an important component of the C.I. Reactive Blue 2 chromophore. Chromatographic studies indicated that, in comparison to adsorbents comprising triazine ring-immobilised dyes, adsorbents formed from C.I. Reactive Blue 2 analogues immobilised by the anthraquinone ring were better suited to the isolation of horse liver alcohol dehydrogenase and other adenine nucleotide-requiring enzymes. Similarities between C.I. Reactive Blue 2 analogues immobilised by the anthraquinone ring and N6-(6-aminohexyl)adenine nucleotide derivatives could be identified which may account for these observations. These studies confirm that highly effective affinity ligands based on synthetic textile dyes can be designed in a rational manner.     

Effect of alicyclic ring size on the photophysical and photochemical properties of bis(arylidene)cycloalkanone compounds

A series of bis(arylidene)cycloalkanone compounds based on cyclobutanone, cyclopentanone, cyclohexanone and cycloheptanone, C4-C7, respectively, with a D-π-A-π-D structure containing the same donor and acceptor but different alicyclic rings was prepared. The effects of alicyclic ring size on the photophysical, photochemical and electrochemical properties of these compounds were investigated systematically. We found that an increase of the number of carbons in the central alicyclic ring leads to changes in geometry, which has significant effects on the conjugation, and photophysical and photochemical properties. These effects include decreases in the fluorescence quantum yield, transient lifetimes, peak extinction coefficients, and the singlet oxygen quantum yield with the increase of the ring size. The one-photon absorption spectra, the two-photon absorption (2PA) spectra, and the fluorescence spectra all show a hypsochromic shift with increasing ring size. The results of this study provide guidance for the design of new cycloketone-based D-π-A-π-D 2PA compounds for photopolymerization and photodynamic therapy applications.     

Structurally modified 1,10-phenanthroline based fluorophores for specific sensing of Ni2+ and Cu2+ ions

We report two fluorophores with open coordination sites for specific sensing of Ni(2+) and Cu(2+) ions via a simple synthetic route. The fluorescence activity was completely quenched on coordination of the metal ions with the phenanthroline ring present in the fluorophore as is clearly evident from the photophysical studies.     

多枝罗丹明酰肼类荧光探针的研究进展与应用

罗丹明以其良好的光稳定性、光物理性质和荧光效应得到了人们的极大重视。 基于罗丹明的螺环衍生物与被检测物质作用开环而产生荧光响应的特性,将两个或多个罗丹明母体单元构筑到包含特异性的识别单元的探针分子中,形成多枝的罗丹明酰肼类荧光探针,不仅可以弥补单分子探针的某些功能缺陷,而且可以使其具有更高灵敏度、更高选择性和可靠性,更加有利于分析检测。 本文着重从设计原理、识别性能、应用范围等方面介绍了多枝罗丹明探针在Hg2+、Cu2+、Fe3+和Al3+等离子检测中发展趋势,并展望了这类荧光探针在活细胞金属离子光学成像的应用前景。     

Synthesis, complexation, and fluorescence behavior of armed crown ethers carrying naphthyl group

Armed crown ethers (1-4) bonding through an amine, amide, ether, or ester linkage to naphthyl group were found to display unique photophysical properties in the presence of guest salts. Complexation of PET fluoroionophores (1a and 1b) with Zn(2+) increased the fluorescence intensities of the host by a factor of 2.4 and 2.7, respectively. (1)H and (13)C NMR analyses of this complexation behavior of 1a revealed that Zn(2+) strongly coordinates with the armed crown nitrogen to cause a dramatic decrease in an intramolecular charge-transfer character. The armed crowns (2 and 3), bonding through an ether or ester linkage to a naphthalene, gave fluorescence quenching with guest thiocyanates. While the amide derivative (4) exhibited high Ba(2+) fluorescence selectivity and in the presence of this cation the host fluorescence intensity was by a factor of 3.69.     

Modular solid-phase synthetic approach to optimize structural and electronic properties of oligoboronic acid receptors and sensors for the aqueous recognition of oligosaccharides

This article describes the design and optimization of the first entirely modular, parallel solid-phase synthetic approach for the generation of well-defined polyamine oligoboronic acid receptors and fluorescence sensors for complex oligosaccharides. The synthetic approach allows an effective building of the receptor polyamine backbone, followed by the controlled diversification of the amine benzylic side chains. This approach enabled the testing, in a modular fashion, of the effect of different arylboronic acid units substituted with unencumbering para electron-withdrawing or electron-donating groups. The feasibility of this approach toward automated synthesis was also investigated with the assembly of a sublibrary of receptors by means of the Irori MiniKan technology. Several sublibraries of anthracene-capped sensors containing two or three arylboronic acids were synthesized, and their binding to a series of model disaccharides was examined in neutral aqueous media. The calculation of association constants by fluorescence titrations confirmed that subtle changes in the structures of the interamine spacers in the polyamine backbone can have a significant effect on the stability of the resulting complexes. Most importantly, this study led to the determination of the preferred electronic characteristics for the arylboronate units, and suggests that a new generation of receptors containing very electron-poor arylboronic acids could lead to a significant improvement of binding affinities.