Rouse's dynamics of networks with pendant chains

A model to describe the dynamics of networks with linear pendant chains has been formulated based on the properties of ensembles of micronetworks, using the Rouse model. This development indicates that the terminal relaxation time of pendant chains with relatively large molecular weight scales with the square of the molecular weight of those chains. On the other hand, when the molecular weight of pendant and elastically active chains are comparable, a nearly exponential growth of the terminal relaxation time with the molecular weight is predicted. The main predictions of the model are compared with experimental results of model poly(dimethyl siloxane) (PDMS) networks, with controlled amounts of linear pendant chains of known molecular weight. The terminal relaxation time of these networks was estimated from the values of the loss modulus G″(ω) measured experimentally. An exponential dependence on the molecular weight of pendant chains was derived for the terminal relaxation time. This behavior is in good agreement with the predictions of our model for micronetworks, provided that the friction coefficient scales linearly with the number of entanglements. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1121–1130, 1999     

Interfacial friction and adhesion of cross-linked polymer thin films swollen with linear chains

The preparation and interfacial properties of a new type of tethered, thin-film lubricant coating are presented. These coatings are composed of three components: a dense self-assembled monolayer (SAM) underlayer that presents reactive vinyl groups at its surface; a cross-linked polydimethylsiloxane (PDMS) overlayer that is covalently tethered to the SAM; and free, mobile linear PDMS chains dispersed in the network. We investigate the influence of the molecular weight (Ms) and concentration of the free PDMS chains on the structure and equilibrium swelling properties of the cross-linked films. Using a bead-probe lateral force microscopy measurement technique, we also quantify the interfacial friction and adhesion characteristics of surfaces functionalized with these coatings. We find that both the volume fraction and the molecular weight of free PDMS molecules in the coatings influence their interfacial friction and adhesion properties. For example, the addition of short PDMS chains in dry, cross-linked PDMS thin films yields tethered surface coatings with ultralow friction coefficients (mu = 5.2 x 10(-3)). An analysis based on classical lubrication theory suggests that the reduction in friction force produced by free polymer is a consequence of the gradual separation of asperities on opposing surfaces and the consequent substitution of solid-solid friction by viscous drag of the free polymer chains in the network.     

Sliding friction at a rubber/brush interface

We study the friction of a poly(dimethylsiloxane) (PDMS) rubber network sliding, at low velocity, on a substrate on which PDMS chains are end-tethered. We thus clearly evidence the contribution to friction of the pullout mechanism of chain ends that penetrate into the network. This interfacial dissipative process is systematically investigated by probing the velocity dependence of the friction stress and its variations with the grafting density and molecular weight of the tethered chains. This allows us to confirm semiquantitatively the picture of arm retraction relaxation of the grafted chains proposed in models of slippage at a network/brush interface.     

Studies of self-diffusion of poly(dimethylsiloxane) chains in PDMS model networks by pulsed field gradient NMR

We have measured the diffusion of poly(dimethylsiloxane) (PDMS) chains in PDMS model networks by using a pulsed field gradient NMR technique. The model networks have been prepared by tetrafunctional endliking of linear PDMS chains having molecular weights M_n of 3,700 and 7,400 g mol^?1. The diffusants have been incorporated in the networks by immersing pieces of them in PDMS linear chains with molecular weights M_n between 3,000 and 12,000 g mol^?1 and molecular weight distributions M_w/M_n between 1.1 and 1.7. Although spin-echo attenuation results were fitted to a model which takes into account polydispersity of the diffusant, these results did not exhibit any dependency upon the molecular weight distribution. The self-diffusion coefficients of PDMS chains in the PDMS model networks were found to be smaller than in the melt, and the exponents for the diffusion coefficient dependence on M_n in the networks were found to be about-1.3. Free diffusion will give an exponent equal to-1, whereas free volume contributions or behavior intermediate between free and entangled diffusion will increase the magnitude of the exponent.     

MICROPHASE SEPARATED STRUCTURES AND PROPERTIES OF PDMS-MDI-PEG COPOLYMER SURFACE

A series of poly(dimethylsiloxane)(PDMS)-4,4′-diphenylmethanediisocyanate(MDI)-poly(ethylene glycol)(PEG) multiblock copolymers were synthesized by employing two-step growth polymerization and investigated by AFM,XPS. contact angle system,protein adsorption and platelets adhesion measurements,respectively.It was found that as the molecular weight of PDMS increased,the surface of copolymers had increasing phase separation,while the increase in the molecular weight of PEG decreased the phase separation ext...     

Chains anisotropy in PDMS networks due to friction on gold surfaces

In this article, we describe an experimental friction study of poly(dimethyl siloxane) (PDMS) networks on metallic substrates such as gold-coated slides, and under different conditions. The friction generates a transfer of a thin layer of PDMS and a preferential orientation of the polymer chains at the interface. However, the characterization of this layer is complicated, given the small amount of matter and the contact with a metallic surface. The polarization-modulation infrared reflexion-absorption spectroscopy (PM-IRRAS), which is an excellent tool for anisotropy and orientation studies, was used to characterize the PDMS transferred layer. Our results showed an induced anisotropy due to the friction, and in which PDMS chains are lying parallel to the gold substrate surface. Our spectroscopic analyzes allowed us to imagine a scheme of PDMS transfer on the gold surface. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2348–2353, 2004     

Impact of solvent quality on nanoparticle dispersion in semidilute and concentrated polymer solutions

We investigated how solvent quality affects the stability of polymer-grafted nanoparticles in semidilute and concentrated polymer solutions, which extends our previous studies on these types of dispersions in good solvents [Langmuir 2008, 24, 5260-5269]. As discussed in the current article, dynamic light scattering (DLS) was used to quantify the diffusion of polydimethylsiloxane-grafted silica nanoparticles, or PDMS-g-silica, in bromocyclohexane as well as in PDMS/bromocyclohexane solutions. We established that bromocyclohexane is a theta solvent for PDMS by varying the temperature of the solutions with PDMS-g-silica nanoparticles and detecting their aggregation at a theta temperature of T(Θ) = 19.6 °C. Using this temperature as a benchmark for the transition between good and bad solvent conditions, further stability tests were carried out in semidilute and concentrated polymer solutions of PDMS in bromocyclohexane at T = 10-60 °C. Irrespective of temperature, i.e., solvent quality, we found that the nanoparticles dispersed uniformly when molecular weight of the graft polymer was greater than that of the free polymer. However, when the free polymer molecular weight was greater than that of the graft polymer, the nanoparticles aggregated. Visual studies were also used to confirm the correspondence between nanoparticle stability and graft and free polymer molecular weights in a wide range of marginally poor solvents with PDMS. Further, the correspondence between nanoparticle stability and instability with graft and free polymer molecular weight and solvent quality was also supported with self-consistent mean-field calculations. Thus, by relating experiment and theory, our results indicate that nanoparticle stability in semidilute and concentrated polymer solutions is governed by interactions between the graft and free polymers under conditions of variable solvency.     

Nanoparticle stability in semidilute and concentrated polymer solutions

The wetting of PDMS-grafted silica spheres (PDMS- g-silica) is connected to their depletion restabilization in semidilute and concentrated PDMS/cyohexane polymer solutions. Specifically, we found that a wetting diagram of chemically identical graft and free homopolymers predicts stability of hard, semisoft, and soft spheres as a function of the bulk free polymer volume fraction, graft density, and the graft and free polymer chain lengths. The transition between stable and aggregated regions is determined optically and with dynamic light scattering. The point of demarcation between the regions occurs when the graft and free polymer chains are equal in length. When graft chains are longer than free chains, the particles are stable; in contrast, the particles are unstable when the opposite is true. The regions of particle stability and instability are corroborated with theoretical self-consistent mean-field calculations, which not only show that the grafted brush is responsible for particle dispersion in the complete wetting region but also aggregation in the incomplete wetting region. Ultimately, our results indicate that depletion restabilization depends on the interfacial properties of the nanoparticles in semidilute and concentrated polymer solutions.     

Effect of molecular weight on microcrystalline structure formation in polymer with perylenediimide side chain

The effect of molecular weight on the molecular aggregation structure of polymers bearing a pendant perylenediimide (PDI) side chain, designated PAc12PDI, was investigated using synchrotron radiation X‐ray diffraction measurements. It was found that depending on molecular weight, either the main chain axis or the side chain axis behaves as the longitudinal axis in fiber samples and was aligned parallel to the fiber axis. A similar phenomenon is present in thin film samples, but was complicated by the additional influence of the interfacial free energy of the side chain group. Even in the case of the polymer with lower molecular weight, the face plane of PDI was found to show both parallel and perpendicular orientations to the substrate (i.e., flat‐on and edge‐on orientations). On the other hand, if the length of the main chain is sufficiently long with respect to the length of the side chain, the face plane of PDI was oriented perpendicular to the substrate, leading to an edge‐on orientation in the thin film. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2275–2283     

Model for solid-liquid and solid-solid friction of rough surfaces with adhesion hysteresis

Mechanisms of energy dissipation during solid-solid and solid-liquid friction are discussed. A conservative van der Waals adhesion force, when combined with surface imperfectness, such as deformation, leads to adhesion hysteresis (AH). When an asperity slides upon a substrate, the substrate is subjected to a loading-unloading cycle, and energy is dissipated due to the AH. Another mechanism, which leads to energy dissipation, involves energy barriers between metastable states due to surface roughness. Both mechanisms are fundamental for sliding and result in both solid-liquid and solid-solid friction.     

Induced orientation of free chains in a strained rubber: A deuterium magnetic resonance study

Linear free polydimethylsiloxane (PDMS) chains are dissolved in a PDMS model network. When the system is uniaxially stretched, the free chains, as well as the network chains themselves, acquire a uniaxial orientational order, which is monitored by ²H NMR. The induced orders measured on both kinds of chains are comparable. The order is then investigated as functions of the free chain length and concentration.     

High-density fabrication of normally closed microfluidic valves by patterned deactivation of oxidized polydimethylsiloxane

The use of polydimethylsiloxane (PDMS) in microfluidic devices is extensive in academic research. One of the most fundamental treatments is to expose PDMS to plasma oxidation in order to render its surface temporarily hydrophilic and capable of permanent bonding. Here, we show that changes in the surface chemistry induced by plasma oxidation can spatially be counteracted very cleanly and reliably in a scalable manner by subsequent microcontact printing of residual oligomers from a PDMS stamp. We characterize the surface modifications through contact angle, atomic force microscopy, X-ray photoelectron spectroscopy, and bond-strength measurements. We utilize this approach for negating the bonding of a flexible membrane layer within an elastomeric valve and demonstrate its effectiveness by integration of over one thousand normally closed elastomeric valves within a single substrate. In addition, we demonstrate that surface energy patterning can be used for "open microfluidic" applications that utilize spatial control of surface wetting.     

Elastic behavior of bimodal poly(dimethylsiloxane) networks

The rubberlike elastic behavior of bimodal poly(dimethylsiloxane) (PDMS) networks was investigated by the Monte Carlo simulation method and enumeration calculation method on the basis of the rotational‐isomeric‐state (RIS) model. These bimodal PDMS networks consist of short chains (chain length from 10 to 20) as well as long chains (chain length equal to 150). For long PDMS chains, through generating many PDMS conformations in the equilibrium state using the Monte Carlo simulation method we can obtain the average Helmholtz free energy and the average energy. For short PDMS chains with chain lengths from 10 to 20, as the total number of conformations is only from 6.56 × 10³ to 3.87 × 10⁸, we adopt the enumeration calculation method. The deformation is partitioned nonaffinely between the long and short chains, and this partitioning can be determined by requiring the free energy of the deformed network to be minimized. Chain dimensions and thermodynamic statistical properties of bimodal PDMS networks at various elongation ratios are discussed. We find that elastic force f increases with elongation ratio λ; the energy contribution f_u to elastic force is significant, and the ratio of ranges from 0.15 to 0.36 at T = 343 K. In the meantime, elastic force f increases with the average energy 〈U〉. The energy change in the process of tensile elongation is taken over, which has been ignored in previous theories. Our calculations may provide some insights into the phenomena of rubberlike elasticity of bimodal networks. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 105–114, 2002     

Biomedical applications of radiation technology in Mexico

Mexican Health Institutions continuously require suitable medical grade prosthetic materials for reconstructive and plastic surgery. In particular, the requirements of polydimethylsiloxane, PDMS, for soft tissue replacements are rapidly growing. In addition to molecular weight, the properties of PDMS in biomedicine strongly depend on its purity, formulation and processing. High energy radiation has been used for both the synthesis of highly pure PDMS, free of catalyst and chemicals, and for sterilization of biomedical products. Here, are discussed the gamma radiation polymerization of different siloxane precursors to obtain PDMS with specific functionality and molecular structure as well as the radiation sterilization of amniotic membranes used as wound dressing.     

Single chain distribution analysis near a substrate using a combined method of three-dimensional imaging and SCF simulation

The effect of preferential wetting of one of the constituent block chains and corresponding block copolymer morphologies to a carbon substrate is studied from a molecular level. The single chain distribution of the block copolymer was estimated as a function of the distance from the substrate by a combined method of transmission electron microtomography (TEMT) and self-consistent field (SCF) simulation. The former provides three-dimensional (3D) morphological information of cylindrical microdomains near the surface, while the latter utilizes the 3D morphology to quantitatively determine the interaction between the block chains and substrate, which is further used to estimate the single chain distribution of one of the block chains, i.e., the subchain, of the matrix. It was found that the subchains in the vicinity of the wetting layer are substantially compressed, while the radius of gyration of the subchain at a distance L (L is the interlayer distance of the cylindrical microdomains from the substrate) has already reached the same value as that in the bulk, indicating that the propagation of the surface interaction is limited to one layer. The methodology developed in this study can be used not only to estimate the surface effect on polymer chains for a variety of different surfaces, but also to provide a means to understand complicated block copolymer morphologies from a molecular level.     

Direct observation of the phase transition for a poly(N-isopropylacryamide) layer grafted onto a solid surface by AFM and QCM-D

The temperature-induced structural changes of a thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) layer grafted onto a silica substrate were investigated in aqueous solution using an atomic force microscope (AFM) and a quartz crystal microbalance with dissipation (QCM-D). A PNIPAM layer was grafted onto the silicon wafer surface by free radical polymerization of NIPAM to obtain a high molecular weight polymer layer with low-grafting density overall. By AFM imaging, the transition of the grafted PNIPAM chains from a brush-like to a mushroom-like state was clearly visualized: The surface images of the plate were featureless at temperatures below the LCST commensurate with a brush-like layer, whereas above the LCST, a large number of domain structures with a characteristic size of approximately 100 nm were seen on the surface. Both frequency and dissipation data obtained using QCM-D showed a significant change at the LCST. Analysis of these data confirmed that the observed PNIPAM structural transition was caused by a collapse of the brush-like structure as a result of dehydration of the polymer chains.     

Contact-line friction of liquid drops on self-assembled monolayers: chain-length effects

The static and dynamic wetting properties of self-assembled alkanethiol monolayers of increasing chain length were studied. The molecular-kinetic theory of wetting was used to interpret the dynamic contact angle data and evaluate the contact-line friction on the microscopic scale. Although the surfaces had a similar static wettability, the coefficient of contact-line friction zeta0 increased linearly with alkyl chain length. This result supports the hypothesis of energy dissipation due to a local deformation of the nanometer-thick layer at the contact line.     

Analytical modeling and thermodynamic analysis of robust superhydrophobic surfaces with inverse-trapezoidal microstructures

A polydimethylsiloxane (PDMS) elastomer surface with perfectly ordered microstructures having an inverse-trapezoidal cross-sectional profile (simply PDMS trapezoids) showed superhydrophobic and transparent characteristics under visible light as reported in our previous work. The addition of a fluoropolymer (Teflon) coating enhances both features and provides oleophobicity. This paper focuses on the analytical modeling of the fabricated PDMS trapezoids structure and thermodynamic analysis based on the Gibbs free energy analysis. Additionally, the wetting characteristics of the fabricated PDMS trapezoids surface before and after the application of the Teflon coating are analytically explained. The Gibbs free energy analysis reveals that, due to the Teflon coating, the Cassie-Baxter state becomes energetically more favorable than the Wenzel state and the contact angle difference between the Cassie-Baxter state and the Wenzel state decreases. These two findings support the robustness of the superhydrophobicity of the fabricated Teflon-coated PDMS trapezoids. This is then verified via the impinging test of a water droplet at a high speed. The dependencies of the design parameters in the PDMS trapezoids on the hydrophobicity are also comprehensively studied through a thermodynamic analysis. Geometrical dependency on the hydrophobicity shows that overhang microstructures do not have a significant influence on the hydrophobicity. In contrast, the intrinsic contact angle of the structural material is most important in determining the apparent contact angle. On the other hand, the experimental results showed that the side angles of the overhangs are critical not for the hydrophobic but for the oleophobic property with liquids of a low surface tension. Understanding of design parameters in the PDMS trapezoids surface gives more information for implementation of superhydrophobic surfaces.     

Universal Janus Filters for the Rapid Separation of Oil from Emulsions Stabilized by Ionic or Nonionic Surfactants

Existing Janus filters cannot separate oil from emulsions stabilized by nonionic surfactants. Reported herein are universal Janus filters that separate oil from emulsions stabilized by not only ionic but also nonionic surfactants. To prepare such a filter, poly(dimethyl siloxane) (PDMS) is grafted onto one side of a fabric. The other side is then grafted with a copolymer polysoap bearing pendant oligo(ethylene glycol) monolaurate (EL) chains. Upon contact with an emulsion, the grafted polysoap competes with free surfactants, ionic or nonionic, for adsorption onto the emulsified droplets, drawing them to the surfaces of the fabric fibers, and causes them to coalesce locally. The coalesced oil then migrates to the PDMS‐coated side of the fabric and selectively permeates it. These novel filters possess enhanced versatility and showcase a new application for polysoaps.     

Aggregation phenomena of linear and miktoarm star copolymers of styrene and dimethylsiloxane: Influence of the architecture

The micellar behavior of PS-b-PDMS, PS-b-PDMS-b-PS linear block and (PS)₂(PDMS) miktoarm star copolymers of polystyrene (PS) and polydimethylsiloxane (PDMS) is investigated in DMF, a selective solvent for PS. The linear PS-b-PDMS and star (PS)₂(PDMS) copolymers exhibit different macromolecular architectures but similar compositions and total molecular weight, while the linear PS-b-PDMS-b-PS copolymer has the same composition as the diblock and miktoarm star but double their molecular weight. Static, dynamic light scattering and viscometry were used for the structural characterization of the micelles. Aggregation numbers were found to increase in the order PS-b-PDMS-b-PS < (PS)₂(PDMS) < PS-b-PDMS. The corona thickness was dependent on the molecular weight of the soluble PS chains. In the case of (PS)₂(PDMS), although the core area per PS chain, A_C, was significantly lower than that of the linear copolymers, the coronal chains were not significantly stretched. This can be attributed to the stiff nature of the PS chains, which maintains the elongated form of the chains.