Enhanced piezoelectric properties of sodium bismuth titanate (Na0.5Bi4.5Ti4O15) ceramics with B‐site cobalt modification

The piezoelectric properties of the cobalt‐modified sodium bismuth titanate (Na_0.5Bi_4.5Ti₄O₁₅, NBT) piezoelectric ceramics were investigated. The piezoelectric properties of NBT ceramics were significantly enhanced by cobalt modification. The Curie temperature T_C and piezoelectric constant d₃₃ for the 0.3 wt% cobalt‐modified NBT ceramics (NBT‐C3) were found to be 663 °C and 30 pC/N, respectively. Thermal annealing studies presented that the cobalt‐modified NBT ceramics possess stable piezoelectric properties, demonstrating that the cobalt‐modified NBT‐based ceramics are promising candidates for high temperature piezoelectric applications. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Microstructure,dielectric, and piezoelectric properties of Ce‐modified Na0.5Bi4.5Ti4O15 high temperature piezoceramics

The cerium modified sodium bismuth titanate (Na_0.5Bi_4.5Ti₄O₁₅, NBT) piezoelectric ceramics have been prepared by using the conventional mixed oxide method. X‐ray diffraction analysis revealed that the cerium modified NBT ceramics have a pure four‐layer Aurivillius phase structure. The piezoelectric activity of NBT ceramics was found significantly improved by the modification of cerium. The Curie temperature T_c, and piezoelectric coefficient d₃₃ for the NBT ceramics with 0.50 wt% cerium modification were found to be 655 °C, and 28 pC/N respectively. The Curie temperature gradually decreased from 668 °C to 653 °C with the increase of cerium modification. The dielectric spectroscopy showed that the samples possess stable piezoelectric properties, demonstrating practical potential that for high temperature applications. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The effect of CuO and NiO doping on dielectric and ferroelectric properties of Na0.5Bi0.5TiO3 lead-free ceramics

In the present work, lead-free piezoelectric ceramics (Na_0.5Bi_0.5)TiO₃ –xCuO–yNiO (for x = 0.0, 0.02, 0.04 and 0.06) have been prepared by a conventional solid-state reaction method. An investigation of CuO and NiO doping in bismuth sodium titanate (BNT) and a study of the structure, morphology, and dielectric and ferroelectric properties of the NBT–CuNi system have been conducted. Phase and microstructural analysis of the (Na_0.5Bi_0.5)TiO₃ (NBT) based ceramics has been carried out using X-ray diffraction and scanning electron microscopy (SEM) techniques. Field emission scanning electron microscopy (FE-SEM) images showed that inhibition of grain growth takes place with increasing Cu and Ni concentration. The results indicate that the co-doping of NiO and CuO is effective in improving the dielectric and ferroelectric properties of NBT ceramics. Temperature-dependent dielectric studies have also been carried out at room temperature to 400 °C at different frequencies. The NBT ceramics co-doped with x = 0.06 and y = 0.06 exhibited an excellent dielectric constant ?_r = 1514. The study suggests that there is enormous scope of application of such materials in the future for actuators, ultrasonic transducers and high-frequency piezoelectric devices.     

Piezoelectric and ferroelectric properties of [(K0.4725Na0.4725)Li0.055]NbO3–(Ag0.5Li0.5)TaO3 lead‐free ceramics

New lead‐free piezoelectric (1 – x)[(K_0.4725Na_0.4725)Li_0.055]NbO₃– x (Ag_0.5Li_0.5)TaO₃ [(1 – x)KNNL–x ALT] ceramics were prepared by conventional sintering. Piezoelectric and ferroelectric properties and Curie temperature of the ceramics were studied. The (1 – x)KNNL–x ALT (x = 0.04) ceramics exhibit good properties (d₃₃ ～ 252 pC/N, k_p ～ 41%, T_C ～ 471 °C, T_o–t = 47 °C, P_r = 33.1 μC/cm², E_c = 10.6 kV/cm). These results show that (1 – x)KNNL–x ALT (x = 0.04) ceramic is a promising lead‐free piezoelectric material for high temperature application. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

In‐situ X‐ray diffraction study of an electric field induced phase transition and giant strain in Na0.5Bi0.5TiO3–x %BaTiO3 lead‐free single crystals

A giant electric field (E) induced strain of ε = 0.60% has been observed for Na_0.5Bi_0.5TiO₃–5.6%BaTiO₃ single crystals under E = 20 kV/cm at 130 °C. In‐situ X‐ray diffraction (XRD) revealed that this induced transition was between pseudocubic and tetragonal structures. Our work provides a potential alternative to lead‐based piezoelectric materials. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Photoluminescence and electrical properties of Eu-doped (Na0.5Bi0.5)TiO3 ferroelectric single crystals

Eu³⁺-doped Na_0.5Bi_0.5TiO₃ (Eu:NBT) single crystals were grown by a top-seeded solution growth method. Photoluminescence emission and excitation spectra of Eu:NBT were investigated. The two transitions in ⁷F₀ → ⁵D₀ excitation spectra reveal that Eu³⁺ ions were incorporated into two adjacent crystallographic sites in NBT, i.e., Bi³⁺ and Na⁺ sites. The former has a symmetrical surrounding, while the later has a disordered environment, which was confirmed by decay curve measurements. The dielectric dispersion behavior was depressed and the piezoelectric and ferroelectric properties were improved after Eu doping.     

High-temperature complex impedance and modulus spectroscopic studies of doped Na<Subscript>0.5</Subscript>Bi<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>-BaTiO<Subscript>3</Subscript> ferroelectric ceramics

Lead-free Na_0.5Bi_0.5TiO₃ (NBT) and (1 ? x)Na_0.5Bi_0.5TiO₃ + xBaTiO₃ with x = 0.1 and 0.2 (where x = 0.1 and 0.2 are named as NBT1 and NBT2, respectively), (1 ? y)Na_0.5Bi_0.5TiO₃ + yBa_0.925Nd_0.05TiO₃ with y = 0.1 and 0.2 (where y = 0.1 and 0.2 are named as NBT3 and NBT4, respectively)-based relaxor ferroelectric ceramics were prepared using the sol-gel method. The crystal structure was investigated by X-ray diffraction (XRD) at room temperature (RT). The XRD patterns confirmed the presence of the rhombohedral phase in all the samples. The electrical properties of the present NBT-based samples were investigated by complex impedance and the modulus spectroscopy technique in the temperature range of RT–600 °C. The AC conductivity was found to increase with the substitution of Ba²⁺ ions to the NBT sample whereas it significantly decreased with the addition of Nd³⁺ ions. The more anion vacancies in Ba-added samples and the lower anion vacancies in Nd-added samples were found to be responsible for higher and lower conductivities, respectively.     

New crystallographic dielectric phase boundary in K0.5Na0.5NbO3‐based lead‐free ceramics

0.979K_0.5Na_0.5Nb_1‐xSb_x O₃‐0.021Bi_0.5Na_0.5TiO₃ (KNNSx ‐BNT) lead‐free piezoelectric ceramics were fabricated by conventional solid state reaction technique, and their phase transition and electrical properties were studied. With the increase of x, the rhombohedral‐orthorhombic phase transition temperature of the ceramics increases. Finally, both the rhombohedral‐orthorhombic and orthorhombic‐tetragonal phase transitions of the ceramics were modified to be around room tempera‐ ture when about 6% Sb were substituted for the Nb site, resulting in the formation of a new phase boundary separating rhombohedral and tetragonal phases. The formation of the new phase boundary results in excellent properties for the ceramics, that is, the KNNS0.05‐BNT ceramic shows an enhancement in piezoelectric properties: d₃₃ = 380 pC/N and k_P = 0.438. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of Ba addition on the dielectric and optic properties of (1 – x) Na0.5Bi0.5TiO3–xBaTiO3 (x = 0, 0.025, 0.0325 and 0.05) single crystals

High-quality, large-size lead-free (1 – x)Na_0.5Bi_0.5TiO₃–xBaTiO₃ ((1 – x)NBT–xBT) single crystals (x = 0, 0.025, 0.0325 and 0.05) were grown using the Czochralski method. Dielectric and transmitted light intensity properties were measured for these crystals. The broad anomalies exhibited in the temperature dependence of the transmitted light corresponded to structural and dielectric anomalies and were related to the temperature dependence of polar regions and the appearance of a long-range ferroelectric state. We explain our results based on local electromechanical fields, by inhomogeneity of the ion distribution and the mismatch in ion size. We suggested that the NBT–BT system can be a promising lead-free piezoelectric material for ultrasonic delay-line applications, broadband transducers and sensors.     

Effects of Li Substitution and Sintering Temperature on Properties of Bi0.5（Na,K）0.5TiO3 Lead-Free Piezoelectric Ceramics

Bi0.5 （Na0.72K0.28- x Lix ）0.5 TiO3 （BNKLT- 100x） lead-free piezoelectric ceramics are synthesized by conventional solid state sintering techniques. The dielectric and piezoelectric properties of the BNKLT-100x ceramics as a function of Li content are systematically investigated. It is found that not only Li content but also the sintering temperature has a strong effect on the piezoelectric properties of BNKLT. The piezoelectric constant d33 Of BNKLT varies from 120 to 252pC/N in the Li content range from 0.03 to 0.16. In the sintering temperature range from 1080 to 1130℃, the d33 value of BNKLT-6 changes from 200pC/N to 252pC/N. The BNKLT-6 sample sintered at 1100℃ has the highest piezoelectric constant d33 of 252pC/N, with the electromechanical coupling factors kp of 0.32 and kt of 0.44.     

Bi-fluctuation in Na0.5Bi0.5TiO3 ferroelectric ceramics with abnormal relaxor behaviour

ABSTRACT

The existence of Bi-fluctuation dispersing in Na_0.5Bi_0.5TiO₃ (NBT) relaxor ferroelectric is hinted in other recent studies. However, this fluctuation has not been directly observed yet. We introduce the Bi-rich nano-regions with different sizes in a series of NBT ceramics by the slight excess of Bi³⁺ content. The crystal symmetries of the Bi-rich nano-regions and the NBT matrix are rhombohedral. The lattice parameters of the nano-regions are larger than those of the matrix in NBT ceramics, which were confirmed by the X-ray diffraction Rietveld refinement, TEM techniques and first-principles calculation. Also, the disorder-induced nano-regions appearing as Bi-fluctuation are associated with the complex phase transitions and the high-frequency relaxor behaviour of NBT suggested by the dielectric measurements and Raman spectra.     

Microstructure,dielectric, and piezoelectric properties of 0.38Bi(Gax Sc1–x )O3–0.62PbTiO3 high temperature piezoelectric ceramics

0.38Bi(Ga_x Sc_1–x )O₃–0.62PbTiO₃ (BGSPTx) ceramics have been prepared by using the conventional mixed oxide method. X‐ray diffraction analysis revealed that BGSPTx has a pure perovskite structure, and the crystal symmetry of BGSPTx changed from rhombohedral to tetragonal with increasing Ga content (x). The Curie temperature (T_C) of BGSPTx ceramics is in the range of 448–467 °C for different x. The ferroelectric phase transition of BGSPTx was found to be of the first order type according to the Curie–Weiss law. For x = 0.125, BGSPTx ceramics show enhanced piezoelectric properties: piezoelectric constant d₃₃ = 420 pC/N and d₃₁ = –142 pC/N, planar and thickness electromechanical coupling factors k_p = 56.27% and k_t = 56.00%, respectively. The high‐T_C of BGSPTx coupled with its excellent piezoelectric properties suggests those future high‐temperature applications. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Enhanced depolarization temperature in 0.90NBT–0.05KBT–0.05BT ceramics induced by BT nanowires

The depolarization temperature (T_d) of piezoelectric materials is an important figure of merit for their application at elevated temperatures. This study focuses on the effect of BaTiO₃ (BT) nanowires on T_d and piezoelectric properties of morphotropic-phase-boundary 0.90NBT–0.05KBT–0.05BT ceramics. The results reveal that BaTiO₃ nanowires can pin the domain wall, leading to the increase of coercive field (E_c) from 21.06 kV/cm to 34.99 kV/cm. The T_d value of 0.90NBT–0.05KBT–0.05BT ceramics can be enhanced approximately 20 °C when using BT nanowires instead of BT solution as the raw material. Meanwhile, at the same polarization conditions, the piezoelectric constant of the ceramic added BT nanowires (172 pC/N) is decreased but still remains a larger value compared with those of other lead-free ceramics. The results imply that the addition of BT nanowires into NBT–KBT is a very effective route to improve T_d.     

Dielectric properties and electrical conduction of La2O3-doped (Bi0.5Na0.5)0.94Ba0.06TiO3 ceramics

La₂O₃ (2 wt%)-doped (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ (abbreviated as BNBT6) lead-free piezoelectric ceramics were synthesized by conventional solid-state reaction. X-ray diffraction (XRD) patterns indicated that La₂O₃ has diffused into the lattice of BNBT6 ceramics and formed a solid solution with a pure perovskite structure. Addition of La₂O₃ decreased the piezoelectric properties and electrical conductivity. It was used to study the electrical conductivity of the La₂O₃-doped BNBT6 lead-free piezoelectric ceramics combined with electrical modulus and impedance plots at the temperature range over 788–873 K. The values of activation energy derived from the electrical impedance and modulus were found to be 0.51 and 0.50 eV, respectively. The discrepancy between activation energy of relaxation frequency and the activation energy (0.25 eV) of dc electrical conductivity might have been due to a short-range migration or hopping of single ionized oxygen vacancy and a long-range migration or hopping of charge carriers over the whole disordered system, respectively.     

Dielectric properties of Mg0.95Ni0.05TiO3 ceramic modified by Nd0.5Na0.5TiO3 at microwave frequencies

The effect of Nd_0.5Na_0.5TiO₃ addition on the microwave dielectric properties of Mg_0.95Ni_0.05TiO₃ ceramics was investigated. The Nd_0.5Na_0.5TiO₃ content plays a significant role in improving the dielectric properties. Microwave dielectric measurements show an increase in the dielectric constant (ε_r) and temperature coefficient of the resonant frequency (τ_f) and a decrease in the quality factor (Q × f value) with increasing Nd_0.5Na_0.5TiO₃ content. By properly adjusting the Nd_0.5Na_0.5TiO₃ content, a zero τ_f value can also be obtained, which make Mg_0.95Ni_0.05TiO₃ a promising material in wireless systems. At 1300 °C, the 0.81Mg_0.95Ni_0.05TiO₃–0.19Nd_0.5Na_0.5TiO₃ ceramics possess excellent microwave dielectric properties: a dielectric constant (ε_r) of 25.61, a Q × f value of 69,100 GHz, and a τ_f value of −6 ppm/°C.     

Characterization of lead free (K0.5Na0.5)NbO3-LiSbO3 piezoceramic

(K_0.5Na_0.5)NbO₃ (KNN) based lead free ceramics have been fabricated by a solid state reaction. In this work, LiSbO₃ (LS) modified KNN based ceramics were sintered at atmospheric pressure and high density (>96% theoretical) was obtained. The detailed elastic, dielectric, piezoelectric and electromechanical properties were characterized by using the resonance technique combined with the ultrasonic method. The full set of material constants for the obtained polycrystalline ceramics were determined and compared to the pure hot pressed KNN counterpart. KNN-LS polycrystalline ceramic was found to have higher elastic compliance, dielectric permittivity and piezoelectric strain coefficients, but lower mechanical quality factor, when compared to pure KNN, exhibiting a “softening” behavior. However, a high coercive field (∼17 kV/cm) was found for the LS modified KNN material. The properties as a function of temperature were determined in the range of −50-250 ^°C, showing a polymorphic phase transition near room temperature, giving rise to improved piezoelectric behavior.     

Determination of elastic constants of Na0.5Bi0.5TiO3 from ab initio calculations

Elastic constants and bulk modulus for the tetragonal, rhombohedral, and cubic phase of Na_0.5Bi_0.5TiO₃ crystal were calculated from the first principles. From the calculated elastic constants, other structural properties such as bulk modulus, shear modulus, Young's modulus, and Poisson's ratio can be derived using respective relationships from Voight–Reuss–Hill approximation; bulk modulus was calculated as an example in this article. It was shown that elastic constants show different behavior for compression and elongation. The different values of elastic constants have been calculated for the direction parallel to the bismuth layer (crystallographic a(b)-axis) and the perpendicular direction (crystallographic c-axis). It seems to be caused by bismuth layer structure oxides of Na_0.5Bi_0.5TiO₃ crystal.     

Au/TiO2 nanorod‐based Schottky‐type UV photodetectors

TiO₂ nanorods (NRs) were synthesized on fluorine‐doped tin oxide (FTO) pre‐coated glass substrates using hydrothermal growth technique. Scanning electron microscopy studies have revealed the formation of vertically‐aligned TiO₂ NRs with length of ～2 µm and diameter of 110–128 nm, homogenously distributed over the substrate surface. 130 nm thick Au contacts using thermal evaporation were deposited on the n‐type TiO₂ NRs at room temperature for the fabrication of NR‐based Schottky‐type UV photodetectors. The fabricated Schottky devices functioned as highly sensitive UV photodetectors with a peak responsivity of 134.8 A/W (λ = 350 nm) measured under 3 V reverse bias. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

First principles study of Ca in BaTiO3 and Bi0.5Na0.5TiO3

BaTiO₃–Bi_0.5Na_0.5TiO₃ is one of the promising candidates as a high-temperature relaxor with a high Curie temperature and several preferred dielectric characteristics. It has been found experimentally for a long time that adding calcium to BaTiO₃–Bi_0.5Na_0.5TiO₃ improves its temperature characteristic of the capacitance [J. Electron. Mater. 39, 2471]. In this study, Calcium (Ca) defects in perovskite BaTiO₃ and Bi_0.5Na_0.5TiO₃ have been studied based on first-principles calculations. In both BaTiO₃ and Bi_0.5Na_0.5TiO₃, our calculations showed that Ca atom energetically prefers to substitute for the cations, that is Ba, Bi, Na and Ti, depending on the growth conditions. In most cases, Ca predominantly substitutes on the A-site without providing additional electrical carriers (serve as either neutral defects or self-compensating defects). The growth conditions where Ca can be forced to substitute for B-site (with limited amount) and the conditions where Ca can be forced to serve as an acceptor are identified. Details of the local structures, formation energies and electronic properties of these Ca defects are reported.