Computational study of FOX‐7 synthesis in a solvated reaction system

Ethene and two kinds of nitrating reagents (HNO₃ and N₂O₅) in a variety of solvents were included in respective molecular systems, and each underwent a two‐stage electrophilic and free radical nitro‐substitution reaction to obtain the corresponding nitroethene compounds. Subsequent halogenation (using Cl₂ and Br₂) and amination (using NH₃) were then performed in solvents, also by electrophilic and radical substitution, to produce the desired 1,1‐diamino‐2,2‐dinitroethene (FOX‐7) derivatives. The reaction energy barrier in the nitration stage for obtaining each kind of mononitro ethene exhibited a stepwise decreasing trend when the reaction was carried out in H₂O‐solvated and CH₃OH‐solvated systems, no matter what nitrating agent was used. Related energy barrier data showed that the nitration reaction is more feasible in an H₂O‐solvated than a CH₃OH‐solvated system. The modeling results suggested that N₂O₅ is the better agent for nitration to proceed in water, bromine is suitable for halogenation, and the bromine derivatives are convenient for further amination in an H₂O‐solvated system. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Conjugated polymers for the fluorescent detection of nitroaromatics: Influence of side‐chain sterics and π‐system electronics

A series of eight poly(p‐phenylene vinylene) (PPV) and poly(p‐phenylene ethynylene) (PPE) ( P1–P8 ) derivatives were tested for their ability to detect the nitroaromatic explosive 2,4,6‐trinitrotoluene (TNT) and its model compound 2,6‐dinitrotoluene (DNT). The polymers P1–P8 represent five structural classes that have not been examined for nitroaromatic sensing. These new motifs include PPE derivatives with a main‐chain m‐terphenyl unit ( P1 ) or oxacyclophane canopy‐like structure ( P2 ) and PPV derivatives with 2,6‐mesitylenephenylene repeats ( P3 and P4 ), 9,9‐dialkyl‐1,4‐fluorenylene repeats ( P5 and P6 ), or m‐phenylene units that periodically disrupt π‐conjugation along the backbone of the polymer ( P7 and P8 ). The time‐dependent photoluminescent response of films to TNT and DNT and the solution‐phase Stern‐Volmer quenching constants for both TNT and DNT were determined. The results are rationalized in terms of side‐chain sterics and π‐system electronics and are discussed relative to known conjugated polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1487–1492     

Differentiation of isomeric dinitrotoluenes and aminodinitrotoluenes using electrospray high resolution mass spectrometry

Explosive detection and identification play an important role in the environmental and forensic sciences. However, accurate identification of isomeric compounds remains a challenging task for current analytical methods. The combination of electrospray multistage mass spectrometry (ESI‐MSⁿ) and high resolution mass spectrometry (HRMS) is a powerful tool for the structure characterization of isomeric compounds. We show herein that resonant ion activation performed in a linear quadrupole ion trap allows the differentiation of dinitrotoluene isomers as well as aminodinitrotoluene isomers. The explosive‐related compounds: 2,4‐dinitrotoluene (2,4‐DNT), 2,6‐dinitrotoluene (2,6‐DNT), 2‐amino‐4,6‐dinitrotoluene (2A‐4,6‐DNT) and 4‐amino‐2,6‐dinitrotoluene (4A‐2,6‐DNT) were analyzed by ESI‐MS in the negative ion mode; they produced mainly deprotonated molecules [M ? H]^?. Subsequent low resolution MSⁿ experiments provided support for fragment ion assignments and determination of consecutive dissociation pathways. Resonant activation of deprotonated dinitrotoluene isomers gave different fragment ions according to the position of the nitro and amino groups on the toluene backbone. Fragment ion identification was bolstered by accurate mass measurements performed using Fourier transform ion cyclotron resonance mass spectrometry (FT‐ICR/MS). Notably, unexpected results were found from accurate mass measurements performed at high resolution for 2,6‐DNT where a 30‐Da loss was observed that corresponds to CH₂O departure instead of the expected isobaric NO^? loss. Moreover, 2,4‐DNT showed a diagnostic fragment ion at m/z 116, allowing the unambiguous distinction between 2,4‐ and 2,6‐DNT isomers. Here, CH₂O loss is hindered by the presence of an amino group in both 2A‐4,6‐DNT and 4A‐2,6‐DNT isomers, but nevertheless, these isomers showed significant differences in their fragmentation sequences, thus allowing their differentiation. DFT calculations were also performed to support experimental observations. Copyright © 2014 John Wiley & Sons, Ltd.     

Highly Selective Room Temperature Monoreduction of Dinitro‐arenes by Hydrogen Sulfide under Liquid–Liquid Biphasic Catalysis

Selective reduction of one of the nitro group present in dinitro aromatic compounds by a novel Zinin reagent, H₂S‐laden N‐methyldiethanolamine (MDEA) solution, has been explored in the presence of tetra‐n‐butyl phosphonium bromide as a phase transfer catalyst under the liquid–liquid mode of reaction. Under the room temperature reaction condition, reduction of 2,4‐dinitrotoluene (2,4‐DNT) with H₂S‐laden MDEA leads to the selective reduction of one nitro group present either at the fourth position to obtain 4‐amino‐2‐nitrotoluene (4A2NT) or at the second position to get 2‐amino‐4‐nitrotoluene (2A4NT). The reaction was very fast to achieve 100% conversion, and the selectivity of 4A2NT is much higher than the 2A4NT. A detailed parametric study was performed to analyze the effect of parameters on 2,4‐DNT conversion and selectivity of both the isomers. The apparent activation energy was found to be as high as 46.25 kJ/mol, and the reaction was found to be kinetically controlled. An empirical kinetic model has been developed to correlate with the conversion version time data obtained experimentally. The present system dealt with an industrial problem in dealing with H₂S, present in by‐product gaseous streams of many petroleum and natural gas industries. Novelties in the selective monoreduction lie in that fact that the reaction was done at room temperature (303 K), with a novel reagent, H₂S‐laden MDEA solution. Therefore waste‐minimization was effected to yield value‐added fine chemicals, that is, amines.     

Ab initio Mechanism Study on the Reaction of Chlorine Atom with Formic Acid

The potential energy surface(PES) for the reaction of Cl atom with HCOOH is predicted using ab initio molecular orbital calculation methods at UQCIDS(T,full)6-311 G(3df,2p)//UMP2(full)/6-311 G(d,P) level of theory with zero-point vibrational energy (ZPVE) correction.The calculated results show that the reaction mechanism of Cl atom with formic acid is a C-site hydrogen abstraction reaction from cis-HOC(H)O molecule by Cl atom with a 3.73kJ/mol reaction barrier height,leading to the formation of cis-HOCO radical which will reacts with Cl atom or other molecules in such a reaction system.Because the reaction barrier height of O-site hydrogen abstraction reaction from cis-HOC(H)O molecule by Cl atom which leads to the formation of HCO2 radical is 67.95kJ/mol,it is a secondary reaction channel in experiment,This is in good agreement with the prediction based on the previous experiments.     

Simultaneous determination of nitroaromatic compounds in water using capillary electrophoresis with amperometric detection on an electrode modified with a mesoporous nano‐structured carbon material

In this article, a carbon disk electrode modified with mesoporous carbon material (CMK‐3) was used in CE with amperometric detection system for the simultaneous determination of four types of important nitroaromatic compounds, including 2,4,6‐trinitrotoluene (TNT), 1,3,5‐trinitrobenzene (TNB), 2,4‐dinitrotoluene (DNT) and 1,3‐dinitrobenzene (DNB). Compared with the bare carbon electrode, the CMK‐3 modified electrode greatly improved the sensitivity at a relatively positive detection potential due to its excellent electrocatalytic activities, high conductivity and large effective surface area. The four analytes could be well separated and detected within 480 s. A good linear response was obtained for TNB, DNB, TNT and DNT from 8.4 to 5.0×10³ μg/L, with correlation coefficients higher than 0.9992. And the detection limits were established between 3.0 and 4.7 μg/L for the four investigated nitroaromatic compounds (S/N=3). The CMK‐3‐modified electrode was successfully employed to analyze coking wastewater, tap water and river samples with recoveries in the range of 94.8–109.0%, and RSDs less than 5.0%. The presented results demonstrated that the CMK‐3‐modified carbon electrode used in CE with amperometric detection was of convenient preparation, high sensitivity and good repeatability, which could be employed in the rapid determination of practical samples.     

Anomerization reaction of bare and microhydrated d‐erythrose via explicitly correlated coupled cluster approach. Two water molecules are optimal

We present a comprehensive benchmark computational study which has explored a complete path of the anomerization reaction of bare d ‐erythrose involving a pair of the low‐energy α‐ and β‐furanose anomers, the former of which was observed spectroscopically (Cabezas et al., Chem. Commun. 2013, 49, 10826). We find that the ring opening of the α‐anomer yields the most stable open‐chain tautomer which step is followed by the rotational interconversion of the open‐chain rotamers and final ring closing to form the β‐anomer. Our results indicate the flatness of the reaction's potential energy surface (PES) corresponding to the rotational interconversion path and its sensitivity to the computational level. By using the explicitly correlated coupled cluster CCSD(T)‐F12/cc‐pVTZ‐F12 energies, we determine the free energy barrier for the α‐furanose ring‐opening (rate‐determining) step as 170.3 kJ/mol. The question of the number of water molecules (n ) needed for optimal stabilization of the erythrose anomerization reaction rate‐determining transition state is addressed by a systematic exploration of the PES of the ring opening in the α‐anomer‐(H₂O)_n and various β‐anomer‐(H₂O)_n (n = 1–3) clusters using density functional and CCSD(T)‐F12 computations. These computations suggest the lowest free energy barrier of the ring opening for doubly hydrated α‐anomer, achieved by a mechanism that involves water‐mediated multiple proton transfer coupled with the furanose C O bond breakage. Among the methods used, the G4 performed best against the CCSD(T)‐F12 reference at estimating the ring‐opening barrier heights for both the hydrated and bare erythrose conformers. Our results for the hydrated species are most relevant to an experimental study of the anomerization reaction of d ‐erythrose to be carried out in microsolvation environment. © 2016 Wiley Periodicals, Inc.     

Electrochemiluminescence Detection of TNT by Resonance Energy Transfer through the Formation of a TNT–Amine Complex

2,4,6‐Trinitrotoluene (TNT) is a widely used nitroaromatic explosive with significant detrimental effects on the environment and human health. Its detection is of great importance. In this study, both electrochemiluminescence (ECL)‐based detection of TNT through the formation of a TNT–amine complex and the detection of TNT through electrochemiluminescence resonance energy transfer (ECRET) are developed for the first time. 3‐Aminopropyltriethoxysilane (APTES)‐modified [Ru(phen)₃]²⁺ (phen=1,10‐phenanthroline)‐doped silica nanoparticles (RuSiNPs) with uniform sizes of (73±3) nm were synthesized. TNT can interact with APTES‐modified RuSiNPs through charge transfer from electron‐rich amines in the RuSiNPs to the electron‐deficient aromatic ring of TNT to form a red TNT–amine complex. The absorption spectrum of this complex overlaps with the ECL spectrum of the APTES‐modified RuSiNPs/triethylamine system. As a result, ECL signals of the APTES‐modified RuSiNPs/triethylamine system are turned off in the presence of TNT owing to resonance energy transfer from electrochemically excited RuSiNPs to the TNT–amine complex. This ECRET method has been successfully applied for the sensitive determination of TNT with a linear range from 1×10^?9 to 1×10^?6 M with a fast response time within 1 min. The limit of detection is 0.3 nM . The method exhibits good selectivity towards 2,4‐dinitrotoluene, p‐nitrotoluene, nitrobenzene, phenol, p‐quinone, 8‐hydroxyquinoline, p‐phenylenediamine, K₃[Fe(CN)₆], Fe³⁺, NO₃^?, NO₂^?, Cr³⁺, Fe²⁺, Pb²⁺, SO₃^2?, formaldehyde, oxalate, proline, and glycine.     

Highly Sensitive and Selective Fluorometric/Electrochemical Dual‐Channel Sensors for TNT and DNT Explosives

A novel electro‐active compound, TCAC , is synthesized and its electrochemical polymerized film is used to detect 2,4,6‐trinitrotoluene (TNT) and 2,4‐dinitrotoluene (DNT) explosives through a fluorometric/electrochemical dual‐channel sensor with high sensitivity and selectivity. In particular, the electrochemical sensor for the analysis of TNT had an enhanced sensitivity of 0.5 μM . The detection limit of the sensor was calculated to be 15 nM .     

Electrochemical Sensor Prepared from Molecularly Imprinted Polymer for Recognition of 1,3-Dinitrobenzene (DNB)

An electrochemical sensor was modified with multi‐wall carbon nanotubes (MWCNT) and molecularly imprinted polymer (MIP) material synthesized with acrylamide and ethylene glycol dimethacrylate (EGDMA) in the presence of 1,3‐dinitrobenzene (DNB) as the template molecule. The MWCNT and MIP layers were successively modified on the surface of a glassy carbon electrode (GCE), of which the MIP film works as an artificial receptor due to its specific molecular recognition sites. The MIP material was characterized by FT‐IR and electrochemical methods of square wave voltammetry (SWV). The interferences of other nitroaromatic compounds (NAC) such as 2,4,6‐trinitrotoluene (TNT), 1,3,5‐trinitrobenzene (TNB) and 2,4‐dinitrotoluene (DNT) to DNB were also investigated by the prepared MIP/MWCNT electrode. Compared with other traditional sensors, the MIP/MWCNT modified electrode shows good selectivity and sensitivity. In addition, the current responses to DNB are linear with the concentration ranging from 4.5×10^?8 to 8.5×10^?6 mol/L with the detection limits of 2.5×10^?8 (?0.58 V) and 1.5×10^?8 mol/L (?0.69 V) (S/N=3). The construction process of MIP/MWCNT modified electrode was also studied as well. All results indicate that the MIP/MWCNT modified electrode established an improving way for simple, fast and selective analysis of DNB.     

Theoretical study of mechanism of cycloaddition reaction between dichloro‐germylene carbene (Cl2GeC:) and aldehyde

The mechanism of the cycloaddition reaction between singlet dichloro‐germylene carbene and aldehyde has been investigated with MP2/6‐31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated by zero‐point energy and CCSD (T)//MP2/6‐31G* method. From the potential energy profile, it can be predicted that the reaction has two competitive dominant reaction pathways. The channel (A) consists of four steps: (1) the two reactants (R1, R2) first form an intermediate INT2 through a barrier‐free exothermic reaction of 142.4 kJ/mol; (2) INT2 then isomerizes to a four‐membered ring compound P2 via a transition state TS2 with energy barrier of 8.4 kJ/mol; (3) P2 further reacts with aldehyde (R2) to form an intermediate INT3, which is also a barrier‐free exothermic reaction of 9.2 kJ/mol; (4) INT3 isomerizes to a germanic bis‐heterocyclic product P3 via a transition state TS3 with energy barrier of 4.5 kJ/mol. The process of channel (B) is as follows: (1) the two reactants (R1, R2) first form an intermediate INT4 through a barrier‐free exothermic reaction of 251.5 kJ/mol; (2) INT4 further reacts with aldehyde (R2) to form an intermediate INT5, which is also a barrier‐free exothermic reaction of 173.5 kJ/mol; (3) INT5 then isomerizes to a germanic bis‐heterocyclic product P5 via a transition state TS5 with an energy barrier of 69.4 kJ/mol. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Theoretical studies of mechanisms of cycloaddition reaction between difluoromethylene carbene and acetone

Mechanisms of the cycloaddition reaction between singlet difluoromethylene carbene and acetone have been investigated with the second‐order Møller–Plesset (MP2)/6‐31G* method, including geometry optimization and vibrational analysis. Energies for the involved stationary points on the potential energy surface (PES) are corrected by zero‐point energy (ZPE) and CCSD(T)/6‐31G* single‐point calculations. From the PES obtained with the CCSD(T)//MP2/6‐31G* method for the cycloaddition reaction between singlet difluoromethylene carbene and acetone, it can be predicted that path B of reactions 2 and 3 should be two competitive leading channels of the cycloaddition reaction between difluoromethylene carbene and acetone. The former consists of two steps: (i) the two reactants first form a four‐membered ring intermediate, INT2, which is a barrier‐free exothermic reaction of 97.8 kJ/mol; (ii) the intermediate INT2 isomerizes to a four‐membered product P_2b via a transition state TS2b with an energy barrier of 24.9 kJ/mol, which results from the methyl group transfer. The latter proceeds in three steps: (i) the two reactants first form an intermediate, INT1c, through a barrier‐free exothermic reaction of 199.4 kJ/mol; (ii) the intermediate INT1c further reacts with acetone to form a polycyclic intermediate, INT3, which is also a barrier‐free exothermic reaction of 27.4 kJ/mol; and (iii) INT3 isomerizes to a polycyclic product P₃ via a transition state TS3 with an energy barrier of 25.8 kJ/mol. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Phenylene(vinylene) based fluorescent polymer for selective and sensitive detection of nitro‐explosive picric acid

We report the synthesis of phenylene(vinylene) based blue light emitting polymer by atom transfer radical polymerization with very good yield. Their photophysical properties were studied systematically with increasing polarities of solvent and sensing of nitro aromatics in solution and in vapor phase. The sensory properties of the polymer were studied toward various nitroaromatic compounds like nitrobenzene (NB), nitrotoluene (NT), dinitrobenzene (DNB), dinitrotoluene (DNT), nitro benzoic acid (NBA), 3‐nitro benzaldehyde (3‐NBA), trinitrotoluene (TNT), 4‐nitrophenol (NP), and picric acid (PA) in solution state. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3800–3807     

Ab initio Study of Mechanism of Forming Germanic Hetero-Polycyclic Compound between Germylene Carbene (H2Ge=C: ) and Formaldehyde

The mechanism of the cycloaddition reaction of forming germanic hetero‐polycyclic compound between singlet germylene carbene and formaldehyde has been investigated with MP2/6‐31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated by CCSD (T)//MP2/6‐31G* method. From the potential energy profile, we predict that the cycloaddition reaction of forming germanic hetero‐polycyclic compound between singlet germylene carbene and formaldehyde has two competitive dominant reaction pathways. First dominant reaction pathway consists of four steps: (1) the two reactants (R1, R2) first form an intermediate (INT1) through a barrier‐free exothermic reaction of 117.5 kJ/mol; (2) intermediate (INT1) then isomerizes to a four‐membered ring compound (P2) via a transition state (TS2) with an energy barrier of 25.4 kJ/mol; (3) four‐membered ring compound (P2) further reacts with formaldehyde (R2) to form an intermediate (INT3), which is also a barrier‐free exothermic reaction of 19.6 kJ/mol; (4) intermediate (INT3) isomerizes to a germanic bis‐heterocyclic product (P3) via a transition state (TS3) with an energy barrier of 5.8 kJ/mol. Second dominant reaction pathway is as follows: (1) the two reactants (R1, R2) first form an intermediate (INT4) through a barrier‐free exothermic reaction of 197.3 kJ/mol; (2) intermediate (INT4) further reacts with formaldehyde (R2) to form an intermediate (INT5), which is also a barrier‐free exothermic reaction of 141.3 kJ/mol; (3) intermediate (INT5) then isomerizes to a germanic bis‐heterocyclic product (P5) via a transition state (TS5) with an energy barrier of 36.7 kJ/mol.     

Theoretical study of mechanism of cycloaddition reaction between dimethylmethylene carbene and formaldehyde

The cycloaddition mechanism of forming a polycyclic compound between singlet dimethylmethylene carbene(R1) and formaldehyde(R2) has been investigated with MP2/6‐31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated with CCSD(T)//MP2/6‐31G* method. From the potential energy profile, it can be predicted that the dominant reaction pathway of the cycloadditional reaction between singlet dimethylmethylene carbene and formaldehyde consists of two steps: (1) the two reactants(R1, R2) firstly form an energy‐enricheded intermediate (INT1a) through a barrier‐free exothermic reaction of ΔE = 11.3 kJ/mol. (2) Intermediate (INT1a) then isomerizes to a three‐membered product (P1) via a transition state (TS1a) with an energy barrier of 20.0 kJ/mol. The dominant reaction has an excellent selectivity and differs considerably from its competitive reactions in reaction rate. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

8-羟基喹啉单体及二聚体质子转移反应的理论研究

Density functional theory （DFT） of quantum chemistry method was employed to investigate proton transfer reactions of 8-hydroxyquinoline （8-HQ） monomers and dimers. By studying the potential energy curves of the isomerization, the most possible reaction pathway was found. The total energy of 8-hydroxyquinoline was lower than that of quinolin-8（1H）-one, whereas the order was reversed in dimers. The findings explained the contrary experimental phenomena. The minimum reaction barrier of intramolecular proton transfer was 47.3 kJ/mol while that in dimer was only 25.7 kJ/mol. Hence it is obvious that proton transfer reactions of 8-HQ monomer have a considerable rate but it is easier to proceed for 8-HQ dimer than monomers. It implied that the hydrogen bond played an important role in depressing the activation energy of reaction. The mechanism of the tautomerization was discussed on the basis of theoretical results.     

Theoretical study of mechanism of forming a silapolycyclic compound between methylenesilylene and acetone

The mechanism of the cycloaddition reaction of forming a silapolycyclic compound between singlet methylenesilylene and acetone has been investigated with MP2/6‐31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated by CCSD(T)//MP2/6‐31G* method. From the potential energy profile, we predict that the cycloaddition reaction of forming a silapolycyclic compound between singlet methylenesilylene and acetone has two competitive dominant reaction pathways. First dominant reaction pathway consists of four steps: (I) the two reactants (R1, R2) first form an intermediate (INT1) through a barrier‐free exothermic reaction of 46.2 kJ/mol; (II) intermediate (INT1) then isomerizes to a planar four‐membered ring product (P3) via transition state (TS3) with an energy barrier of 47.1 kJ/mol; (III) planar four‐membered ring product (P3) further reacts with acetone (R2) to form an intermediate (INT4), which is also a barrier‐free exothermic reaction of 40.0 kJ/mol; (IV) intermediate (INT4) isomerizes to a silapolycyclic compound (P4) via transition state (TS4) with an energy barrier of 57.0 kJ/mol. Second dominant reaction pathway consists of three steps: (I) the two reactants (R1, R2) first form a four‐membered ring intermediate (INT2) through a barrier‐free exothermic reaction of 0.5 kJ/mol; (II) INT2 further reacts with acetone (R2) to form an intermediate (INT5), which is also a barrier‐free exothermic reaction of 45.4 kJ/mol; (III) intermediate (INT5) isomerizes to a silapolycyclic compound (P5) via transition state (TS5) with an energy barrier of 49.3 kJ/mol. P4 and P5 are isomeric compounds. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Diagnostic cyclisation reactions which follow phosphate transfer to carboxylate anion centres for energised [M-H]- anions of pTyr-containing peptides

The low‐energy negative ion phosphoTyr to C‐terminal ‐CO₂PO₃H₂ rearrangement occurs for energised peptide [M–H]^– anions even when there are seven amino acid residues between the pTyr and C‐terminal amino acid residues. The rearranged C‐terminal ‐CO₂PO₂H(O^–) group effects characteristic S_Ni cyclisation/cleavage reactions. The most pronounced of these involves the electrophilic central backbone carbon of the penultimate amino acid residue. This reaction is aided by the intermediacy of an H‐bonded intermediate in which the nucleophilic and electrophilic reaction centres are held in proximity in order for the S_Ni cyclisation/cleavage to proceed. The ΔG_reaction is +184 kJ mol^?1 with the barrier to the S_Ni transition state being +240 kJ mol^?1 at the HF/6‐31 + G(d)//AM1 level of theory. A similar phosphate rearrangement from pTyr to side chain CO₂^– (of Asp or Glu) may also occur for energised peptide [M–H]^– anions. The reaction is favourable: ΔG_reaction is ?44 kJ mol^?1 with a maximum barrier of +21 kJ mol^?1 (to the initial transition state) when Asp and Tyr are adjacent. The rearranged species R¹‐Tyr‐NHCH(CH₂CO₂PO₃H^–)COR² (R¹ = CHO; R² = OCH₃) may undergo an S_Ni six‐centred cyclisation/cleavage reaction to form the product anion R¹‐Tyr(NH^–). This process has a high energy requirement [ΔG_reaction = +224 kJ mol^?1, with the barrier to the S_Ni transition state being +299 kJ mol^?1]. Copyright © 2011 John Wiley & Sons, Ltd.     

亚甲基硅烯与乙烯环加成反应机理的理论研究

The mechanism of a cycloaddition reaction between singlet methylidenesilene and ethylene has been investigated with MP2/6-31G^＊ and B3LYP/6-31G^＊ methods, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. Energies of the involved conformers were calculated by CCSD（T）//MP2/6-31G＊ and CCSD（T）//B3LYP/6-31 G＊ methods, respectively. The results show that the dominant reaction pathway of the cycloaddition reaction is that a complex intermediate is firstly formed between the two reactants through a barrier-free exothermic reaction of 13.3 kJ/mol, and the complex is then isomefized to a four-membered ring product P2,1 via a transition state TS2.1 with a barrier of 32.0 kJ/mol.     

Sensing of 2,4,6‐Trinitrotoluene (TNT) and 2,4‐Dinitrotoluene (2,4‐DNT) in the Solid State with Photoluminescent RuII and IrIII Complexes

A series of metal–organic chromophores containing Ru^II or Ir^III were studied for the luminometric detection of nitroaromatic compounds, including trinitrotoluene (TNT). These complexes display long‐lived, intense photoluminescence in the visible region and are demonstrated to serve as luminescent sensors for nitroaromatics. The solution‐based behavior of these photoluminescent molecules has been studied in detail in order to identify the mechanism responsible for metal‐to‐ligand charge‐transfer (MLCT) excited state quenching upon addition of TNT and 2,4‐dinitrotoluene (2,4‐DNT). A combination of static and dynamic spectroscopic measurements unequivocally confirmed that the quenching was due to a photoinduced electron transfer (PET) process. Ultrafast transient absorption experiments confirmed the formation of the TNT radical anion product following excited state electron transfer from these metal complexes. Reported for the first time, photoluminescence quenching realized through ink‐jet printing and solid‐state titrations was used for the solid‐state detection of TNT; achieving a limit‐of‐quantitation (LOQ) as low as 5.6 ng cm^?2. The combined effect of a long‐lived excited state and an energetically favorable driving force for the PET process makes the Ru^II and Ir^III MLCT complexes discussed here particularly appealing for the detection of nitroaromatic volatiles and related high‐energy compounds.