Magnetic structure and preferential occupation of Fe in the composite compound Nd2Co6Fe

The crystal and magnetic structures of the composite compound Nd₂Co₆Fe have been investigated by high-resolution neutron powder diffraction and X-ray powder diffraction. The compound crystallizes in the hexagonal Ce₂Ni₇-type structure consisting of Nd(Co,Fe)₂ and Nd(Co,Fe)₅ structural blocks alternately stacked along the c-axis. Multi-pattern Rietveld refinement of neutron diffraction and X-ray diffraction data at room temperature reveal that substitution of Fe for Co occurs exclusively in the Nd(Co,Fe)₅ structural blocks. The preferential occupation of the Fe atoms in the structure is discussed based on the mixing enthalpy between Nd and Fe atoms and on the lattice distortions. In agreement with the reported magnetic phase diagram of the Nd₂Co_7−xFe_x compounds, magnetic structure models with the moments of all atoms in the ab plane at 300 K and along the c-axis at 450 K provide a satisfactory fitting to the experimental neutron diffraction data. The refinement results show that the atomic moments of (Co,Fe) atoms within the Nd(Co,Fe)₅ blocks decrease slightly with temperature, whereas the atomic moments of Nd in the compound and of (Co,Fe) atoms at the interface between the Nd(Co,Fe)₂ and Nd(Co,Fe)₅ blocks are reduced significantly.     

Non-Fermi liquid behavior in polycrystalline Ce2PdIn8

We report on the formation of a novel ternary compound Ce₂PdIn₈ that is isostructural with the heavy-fermion superconductors Ce₂CoIn₈ and Ce₂RhIn₈. Its magnetic, electrical transport and thermodynamic properties were studied on polycrystalline samples in wide ranges of temperature and magnetic field strength. The results revealed Ce₂PdIn₈ to be a paramagnetic Kondo lattice with a coherence temperature of about 12 K. The C/T ratio of the specific heat reaches at 350 mK a strongly enhanced magnitude of about per Ce-atom, thus clearly indicating a heavy-fermion nature of this material. Moreover, a logarithmic divergence of C/T vs. T, observed below 3 K, which is accompanied by a linear temperature dependence of the electrical resistivity below 6 K, hint at a non-Fermi liquid character of the electronic ground state in the new compound reported.     

R2Fe17-xAlx化合物中R-T交换耦合常量的计算

讨论了利用分子场近似结合中子衍射或X射线衍射的实验结果计算R₂Fe₁₇型稀土过渡族化合物中稀土磁矩与过渡族磁矩之间交换耦合常量的方法,并据此计算了R₂Fe_17-xAl_x(R=Tb,Dy,Ho,Er,Gd,x=7或8)化合物中稀土磁矩与过渡族磁矩之间的交换耦合常量.计算结果与实验值符合较好. 关键词： 2Fe_17-xAl_x化合物')" href="#">R₂Fe_17-xAl_x化合物 交换耦合常量     

A Mössbauer study of the binary system LiNbO3-Fe2O3 in a broad concentration range

The binary system LiNbO₃-Fe₂O₃ has been studied by Mössbauer spectroscopy in the concentration range up to 24 mol% Fe₂O₃. For Fe₂O₃ concentrations up to 6 mol% iron is incorporated into the matrix of LiNbO₃ as Fe²⁺ and Fe³⁺, whereby the Fe²⁺ content decreases with increasing Fe₂O₃ concentration. Samples containing 9 and 11 mol% Fe₂O₃ showed only the Fe³⁺ valence state. There were no indications of any considerable formation of superparamagnetic Fe₂O₃ clusters up to 11 mol% Fe₂O₃. This is in agreement with the X-ray and DTA investigations of Takei and Katsumata (1982) who found that a solid solution exists between 0 and 11 mol% Fe₂O₃. Above 11 mol% the appearance of magnetically split sextets in the Mössbauer spectra indicated the formation of a second α-Fe₂O₃ phase. The isomer shift, which reflects the electron density at the Fe nucleus, measured as a function of the Fe₂O₃ concentration showed two steps, one at 6 mol% Fe₂O₃ (the turning point of the C_H axis parameter (Takei et al. 1982) and one at 11 mol% Fe₂O₃ (phase boundary). These steps were tentatively related to abrupt changes in the spontaneous polarization.     

High heat generation ability in AC magnetic field for nano-sized magnetic Y3Fe5O12 powder prepared by bead milling

Nano-sized magnetic Y₃Fe₅O₁₂ ferrite having a high heat generation ability in an AC magnetic field was prepared by bead milling. A commercial powder sample (non-milled sample) of ca. 2.9 μm in particle size did not show any temperature enhancement in the AC magnetic field. The heat generation ability in the AC magnetic field improved with a decrease in the average crystallite size for the bead-milled Y₃Fe₅O₁₂ ferrites. The highest heat ability in the AC magnetic field was for the fine Y₃Fe₅O₁₂ powder with a 15-nm crystallite size (the samples were milled for 4 h using 0.1 mm? beads). The heat generation ability of the excessively milled Y₃Fe₅O₁₂ samples decreased. The main reason for the high heat generation property of the milled samples was ascribed to an increase in the Néel relaxation of the superparamagnetic material. The heat generation ability was not influenced by the concentration of the ferrite powder. For the samples milled for 4 h using 0.1 mm? beads, the heat generation ability (W g⁻¹) was estimated using a 3.58×10⁻⁴ fH² frequency (f/kHz) and the magnetic field (H/kA m⁻¹), which is the highest reported value of superparamagnetic materials.     

Nanowires of iron oxides embedded in SiO2 templates

To attain the complete filling of the channels of MCM-41 with magnetite and maghemite, we have tried out an alternative method to the incipient wetness impregnation. The mesoporous material was instilled with a Fe-carrying organic salt after subjecting the matrix to a silylation treatment. Thus, a solid of 7.7 wt.% iron-loaded MCM-41 was obtained. Different subsequent thermal treatments were used to produce γ-Fe₂O₃ or Fe₃O₄. The Mössbauer and magnetic results show that after this method, the as-prepared composite displays a size-distribution of magnetic particles. It is mainly made up of fine particles that display a superparamagnetic relaxation at room temperature and get blocked at ≈42 K for the AC susceptibility time-scale measurements both for γ-Fe₂O₃ and Fe₃O₄ particles. For both samples, about 24% of larger iron-containing phases are magnetically blocked at room temperature. For the Fe₃O₄ particles, this fraction undergoes the Verwey transition at about 110 K; in addition, there is a minor Fe (III) fraction that remains paramagnetic down to 4.2 K.     

Magnetic properties of the Lu2Fe17−xMnx single crystals

Magnetic properties of the single-crystalline Lu₂Fe_17−xMn_x compounds, in which x=0, 0.5, and 2, with the Th₂Ni₁₇-type crystal structure are reported. The Lu₂Fe_17−xMn_x compounds with x=0 and 0.5 are ferromagnets at low temperatures and antiferromagnets at high temperatures. The compound with x=2 is always a ferromagnet. The easy-plane magnetic anisotropy in the Lu₂Fe_17−xMn_x ferromagnets drastically weakens with increase in Mn content up to x=2. The temperature dependence of the first magnetic anisotropy constant was obtained and compared with the single-ion model prediction.     

Green synthesis and characterization of superparamagnetic Fe3O4 nanoparticles

In this paper, we have first demonstrated a facile and green synthetic approach for preparing superparamagnetic Fe₃O₄ nanoparticles using α-d-glucose as the reducing agent and gluconic acid (the oxidative product of glucose) as stabilizer and dispersant. The X-ray powder diffraction (XRD), X-ray photoelectron spectrometry (XPS), and selected area electron diffraction (SAED) results showed that the inverse spinel structure pure phase polycrystalline Fe₃O₄ was obtained. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results exhibited that Fe₃O₄ nanoparticles were roughly spherical shape and its average size was about 12.5 nm. The high-resolution TEM (HRTEM) result proved that the nanoparticles were structurally uniform with a lattice fringe spacing about 0.25 nm, which corresponded well with the values of 0.253 nm of the (3 1 1) lattice plane of the inverse spinel Fe₃O₄ obtained from the JCPDS database. The superconducting quantum interference device (SQUID) results revealed that the blocking temperature (T_b) was 190 K, and that the magnetic hysteresis loop at 300 K showed a saturation magnetization of 60.5 emu/g, and the absence of coercivity and remanence indicated that the as-synthesized Fe₃O₄ nanoparticles had superparamagnetic properties. Fourier transform infrared spectroscopy (FT-IR) spectrum displayed that the characteristic band of Fe-O at 569 cm⁻¹ was indicative of Fe₃O₄. This method might provide a new, mild, green, and economical concept for the synthesis of other nanomaterials.     

Green synthesis of soya bean sprouts-mediated superparamagnetic Fe3O4 nanoparticles

Superparamagnetic Fe₃O₄ nanoparticles were first synthesized via soya bean sprouts (SBS) templates under ambient temperature and normal atmosphere. The reaction process was simple, eco-friendly, and convenient to handle. The morphology and crystalline phase of the nanoparticles were determined from scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and X-ray diffraction (XRD) spectra. The effect of SBS template on the formation of Fe₃O₄ nanoparticles was investigated using X-ray photoemission spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR). The results indicate that spherical Fe₃O₄ nanoparticles with an average diameter of 8 nm simultaneously formed on the epidermal surface and the interior stem wall of SBS. The SBS are responsible for size and morphology control during the whole formation of Fe₃O₄ nanoparticles. In addition, the superconducting quantum interference device (SQUID) results indicate the products are superparamagnetic at room temperature, with blocking temperature (T_B) of 150 K and saturation magnetization of 37.1 emu/g.     

Unified calculations of the optical and electron paramagnetic resonance spectral data for Ce ion in Y3Ga5O12 crystal

Seven crystal field energy levels (obtained from the optical spectra) and three g factors g_x, g_y and g_z (obtained from electron paramagnetic resonance (EPR) spectra) for Ce³⁺ ion in Y₃Ga₅O₁₂ crystal are calculated together by diagonalizing a complete energy matrix. The Hamiltonian of this energy matrix includes all the interactions for 4f¹ ion Ce³⁺ in rhombic crystal field and under an external magnetic field, and so the optical and EPR data can be studied in a unified way. The calculated crystal field energy levels are in better agreement with the experimental values than the calculated values in the previous paper, and the g factors (which have not been calculated previously) are explained reasonably. The results are discussed.     

Preparation of superparamagnetic Fe3O4/PMMA nano composites and their magnetorheological characteristics

Fe₃O₄/PMMA composite particles were fabricated by a simple one-pot hydrothermal method. The magnetic measurement showed that the composite particles displayed a higher saturated magnetization and superparamagnetic property. The rheological properties of the magnetorheological fluids (MRFs) based on Fe₃O₄/PMMA particles were measured on a rotational rheometer with a magnetic field generator. It was found that the MRFs exhibited better MR effect and sendimentary stability than the similar materials.     

Crystal structure and photoluminescence of (Y1−xCex)2Si3O3N4

Oxonitridosilicate phosphors with compositions of (Y_1−xCe_x)₂Si₃O₃N₄ (x=0−0.2) have been synthesized by solid state reaction method. The structures and photoluminescence properties have been investigated. Ce³⁺ ions have substituted for Y³⁺ ions in the lattice. The emission and excitation spectra of these phosphors show the characteristic photoluminescence spectra of Ce³⁺ ions. Based on the analyses of the diffuse reflection spectra and the PL spectra, a systematic energy diagram of Ce³⁺ ion in the forbidden band of sample with x=0.02 is given. The best doping Ce content in these phosphors is ∼2 mol%. The quenching temperature is ∼405 K for the 2 mol% Ce content sample. The luminescence decay properties were investigated. The primary studies indicate that these phosphors are potential candidates for application in three-phosphor-converted white LEDs.     

Relationship between structural and magnetic properties in (Ti,Fe)O2 powders obtained by mechanical milling

Fe-doped TiO₂ samples with different Fe content were prepared by mechanical alloying starting from TiO₂ rutile and FeO. The samples were structurally and magnetically characterized by XRD, Mössbauer spectroscopy, X-ray absorption spectroscopy (XAS), AC-susceptibility and magnetization measurements. XAS results showed that Fe ions were incorporated into the rutile phase with oxygen coordination that was lower than that expected in this phase. The oxygen coordination number decreased with the increase of Fe²⁺ ions such as it was previously found in the milled samples of TiO₂ doped with hematite. The RT Mössbauer spectra were reproduced using two paramagnetic interactions, one corresponding to Fe²⁺ (δ∼0.87 mm/s) and the other to Fe³⁺ (δ∼0.31 mm/s). Magnetometry measurements showed the presence of paramagnetic and ferromagnetic-like interactions at room temperature. Although saturation and coercivity of the ferromagnetic phase increased with iron, the effective magnetic moment per iron atom decreased, probably due to the precipitation of Fe rich antiferromagnetic structures.     

Luminescence of heavily Ce-doped alkaline-earth fluorides

The spectral and kinetic parameters of M_1−xCe_xF_2+x (x=0.35, M=Ca, Sr, Ba) crystals luminescence have been studied. These characteristics are compared to the luminescence of solution base hosts: MF₂:Ce and CeF₃. The emission bands of heavily Ce-doped alkali earth fluorides are closed to the spectrum of perturbed Ce-center in CeF₃ at T=9 K. Luminescence of M_0.65Ce_0.35F_2.35 crystals reveals the efficient excitation in the UV and VUV ranges. The main feature of the emission and excitation spectra of Ce³⁺ luminescence is the displacement to the low-energy range according to the bandgap decrease in the Ca-, Sr- and Ba-based fluorides, respectively. Small Stokes shift leads to the reabsorption and light yield decrease. Luminescence peculiarities of M_1−xCe_xF_2+x solid solution and the role of Ce-enriched inclusions are discussed.     

Atypical magnetic phase diagrams of Ce2Fe17 − x Mnx alloys and their hydrides

Ce₂Fe_{17 ? x} Mn_x compounds and their hydrides (rhombohedral structure of the Th₂Zn₁₇ type) have been investigated for the first time by magnetic measurements and neutron diffraction at normal atmospheric and hydrostatic pressures up to 1 GPa. It has been established that magnetic phase transitions of the ferromagnet-antiferromagnet and antiferromagnet-ferromagnet types are realized in this system with a change in the composition or under pressure.     

Magnetic properties of the Ce2Fe17−xMnx helical magnets up to high magnetic fields

Magnetic properties of the Ce₂Fe_17−xMn_x, x=0–2, alloys in magnetic fields up to 40 T are reported. The compounds with x=0.5–1 are helical antiferromagnets and those with 1<x?2 are helical ferromagnets or helical antiferromagnets at low and high T, respectively. Mn ions in the system carry average magnetic moment of 3.0±0.2 μ_B that couple antiparallelly to the Fe moments. Easy-plane magnetic anisotropy in the Ce₂Fe_17−xMn_x compounds weakens upon substitution of Mn for Fe. The absolute value of the first anisotropy constant in the Ce₂Fe_17−xMn_x helical ferromagnets decreases slower with increasing temperature than that calculated from the third power of the spontaneous magnetization. Noticeable magnetic hysteresis in the Ce₂Fe_17−xMn_x, x=0.5–2, helical magnets over the whole range of magnetic fields reflects mainly irreversible deformation of the helical magnetic structure during the magnetization of the compounds. A contribution from short-range order (SRO) magnetic clusters to the magnetic hysteresis of the helical magnets has been also estimated.     

Crystallization of single-phase nanocrystalline Nd10.8Dy1.5Fe79.7(NbZrCu)2.0B6.0 ribbons

The crystallization of single-phase nanocrystalline Nd_10.8Dy_1.5Fe_79.7(NbZrCu)_2.0B_6.0 ribbons has been investigated. The as-spun ribbons are mainly composed of an amorphous matrix with a small amount of α-Fe, Nd₂Fe₁₄B and/or other crystallization phases. Cu-enriched clusters with different sizes have been found in the as-spun ribbons. These clusters almost disappear after crystallization, which can possess effects on the refinement of grains.     

Changes of the magnetic interactions in TlCo2Se2 upon metal substitution

Various solid solutions TlCo_2−xMe_xSe₂ (Me=Fe, Ni and Cu) have been investigated by neutron powder diffraction, supplemented by magnetometry. The incommensurate spin-helix running along the c-axis in tetragonal TlCo₂Se₂ prevails for low concentrations of copper and iron but changes pitch. In the copper case, only cobalt carries a magnetic moment. On nickel substitution, however, collinear antiferromagnetic coupling between the ferromagnetic layers occurs. The magnetic moment distribution between the two transition metals in the solid solution TlCo_2−xNi_xSe₂ was tentatively probed with first principle calculations on fictive ordered TlCoNiSe₂, modelled by two types of superstructures. Also the ternary mother compounds, Pauli paramagnetic TlNi₂Se₂ and antiferromagnetic TlCo₂Se₂, were investigated with the same LMTO method.     

Sequence of structural and magnetic transitions in Ni48Co2Mn39Sn11 shape memory alloy

The structural and magnetic transitions in Ni₄₈Co₂Mn₃₉Sn₁₁ shape memory alloy were systematically investigated. During cooling, the paramagnetic austenite transforms into paramagnetic martensite at T_M∼375 K, followed by a gradual transition from paramagnetic to superparamagnetic martensite around T_S∼320 K. Upon further cooling through T_P∼100 K, the superparamagnetic clusters collectively freeze into a superspin glass state as corroborated by aging, rejuvenation, and memory effects. Consequently, the unique transition sequence of paramagnetic austenite→paramagnetic martensite→superparamagnetic martensite→superspin-glass martensite is disclosed.     

Y2(Fe1-x-y,Coy,Crx)17化合 物的结构及居里温度

通过x射线衍射及磁测量手段研究了Y₂(Fe_1-y-x,Co_y,C r_x)₁₇化合物的结 构及居里温度.研究结果表明Y₂(Fe_1-y-x,Co_y,Crx)₁₇化合物具有六 角相的Th₂Ni₁₇型结构.随着x的增加，Y₂(Fe 关键词： 2(Fe_1-y-x')" href="#">Y₂(Fe_1-y-x y')" href="#">Co_y x)_{1 7}化合物')" href="#">Cr_x)_{1 7}化合物 x射线衍射 居里温度