CuO/Ce<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Sn<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> catalysts: synthesis,characterization, and catalytic performance for low-temperature CO oxidation

Ce _x Sn_1−x O₂ metal oxides were prepared by a citrate method and used as supports for CuO/Ce _x Sn_1−x O₂ catalysts. The as-prepared samples were characterized by X-ray diffraction (XRD), transmission electron microscopy, high-resolution TEM, and temperature-programmed reduction techniques. XRD analysis indicated that the Ce _x Sn_1−x O₂ samples maintain the fluorite structure and form a solid solution when x = 0.9 or 0.8. TPR analysis revealed that two kinds of copper species are present on the surface of the Ce _x Sn_1−x O₂ support. The catalytic properties of the CuO/Ce _x Sn_1−x O₂ catalysts were evaluated for low-temperature CO oxidation using a microreactor-GC system. The effects of Ce/Sn ratio and CuO loading on the catalytic performance were investigated. The results showed that these CuO/Ce _x Sn_1−x O₂ catalysts are very active for low-temperature CO oxidation. The 650 °C calcined 7 wt%-CuO/Ce _x Sn_1−x O₂ catalyst exhibited the highest catalytic activity.     

Effects of precipitants and surfactants on catalytic activity of Pd/CeO<Subscript>2</Subscript> for CO oxidation

A series of precipitants and commercial surfactants (soft templates) were employed to synthesize mesoporous/nano CeO₂ by a hydrothermal method. As-prepared CeO₂ was impregnated with palladium and employed for low-temperature catalytic oxidation of CO. It was found that both soft templates and precipitants had significant effects on the morphology, particle size, crystallinity, and porous structure of the CeO₂, having a significant effect on the surface palladium abundance, molar ratios of surface species, and catalytic activity of the final impregnated Pd/CeO₂. Using ammonia as precipitant could facilitate increased surface palladium abundance and surface molar ratios of PdO/Pd _SMSI , Ce³⁺/(Ce³⁺ + Ce⁴⁺), and O_surface/O_lattice. The catalytic activity of the final Pd/CeO₂ catalysts could be enhanced as well. The optimal P123-assisted ammonia-precipitated Pd/CeO₂ catalyst exhibited over 99% catalytic conversion of CO at 50 °C.     

CexTi1-xO2复合氧化物表面结构和体相结构的演变

利用X射线衍射、N₂吸附等温线、X射线光电子能谱、X射线吸收谱、H₂-程序升温还原、甲基橙选择化学吸附和等电点测定等方法研究了共沉淀方法制备的一系列Ce_xTi_1-xO₂复合氧化物的结构. 成功发展了甲基橙选择化学吸附和等电点方法研究Ce_xTi_1-xO₂复合氧化物的最外层表面结构, 并定义了“等价CeO₂表面覆盖度”来描述Ce_xTi_1-xO₂复合氧化物的最外层表面结构. Ce_xTi_1-xO₂复合氧化物 (x ≥ 0.7)形成立方萤石相固溶体, Ce_0.3Ti_0.7O₂表现出纯的单斜相, 而其它复合氧化物表现出混合相. Ce_xTi_1-xO₂复合氧化物最外层表面结构的演变行为不同于其体相结构.Ce_0.7Ti_0.3O₂立方萤石相固溶体最外层表面已经部分形成了单斜相Ce_0.3Ti_0.7O₂, 随Ce含量的降低, 单斜相Ce_0.3Ti_0.7O₂从最外层表面向体相生长. Ce_xTi_1-xO₂复合氧化物立方萤石相固溶体和单斜相Ce_0.3Ti_0.7O₂分别在相对较低和较高的温度表现出好的还原性能. 上述结果提供了全面和深层次的Ce_xTi_1-xO₂复合氧化物结构信息.     

Aminated MCM-41-tethered Wilkinson''s complex: active immobilized catalyst precursor for cyclohexene hydroformylation

CuO/Ce_0.7Sn_0.3O₂ catalysts were prepared for the catalytic oxidation of CO. The catalysts were characterized by means of CO-TPD, XRD and TPR. A synergistic interaction between CuO and Ce_0.7Sn_0.3O₂ is responsible for the high activity of carbon monoxide at low temperature.This revised version was published online in December 2005 with corrections to the Cover Date.     

Physicochemical properties of the surface of the (Y,La0.1)Ce x Zr1? x O2?δ( x = 0.1–0.7) and Y0.1Pr0.3Zr0.6O2?δ complex oxide systems

The physicochemical properties of the surface of the Y_0.1Ce _x Zr_1−x O_2−δ, La_0.1Ce _x Zr_1−x O_2−δ (x=0.1–0.7), and Y_0.1Pr_0.3Zr_0.6O_2−δ. complex oxide systems were studied using IR and X-ray photoelectron spectroscopies. An appreciable enrichment of the surface of the solids in rare-earth-metal cations (cerium or praseodymium) during the synthesis was revealed. While cations are uniformly spread over the surface of cerium-zirconium solid solutions, the Y_0.1Pr_0.3Zr_0.6O_2−δ surface is covered by the clusters or even a phase of praseodymia. Reductive treatment in hydrogen with subsequent reoxidation results in the segregation of cerium ions on the Y_0.1Ce_0.3Zr_0.6O_2−δ surface at a temperature as low as 770 K. Original Russian Text ? A.N. Kharlanov, L.N. Ikryannikova, V.V. Lunin, A. Yu. Stakheev, 2007, published in Zhurnal Fizicheskoi Khimii, 2007, Vol. 81, No. 7, pp. 1271–1277.     

XRD and UV-Vis diffuse reflectance analysis of CeO2-ZrO2 solid solutions synthesized by combustion method

A series of ceria-incorporated zirconia (Ce_1−xZr_xO₂,x = 0 to 1) solid solutions were prepared by employing the solution combustion synthesis route. The products were characterized by XRD and UV-Vis-NIR diffuse reflectance spectroscopy. The materials are crystalline in nature and the lattice parameters of the solid solution series follow Vegard’s law. Diffuse reflectance spectra of the solid solutions in the UV region show two intense bands at 250 and 297 nm which are assigned respectively to Ce³⁺ ← O²⁻and Ce⁴⁺ ← O²⁻ charge transfer transitions. The two vibrational bands in 6960 cm⁻¹ and 5168 cm⁻¹ in the NIR region indicate the presence of surface hydroxyl groups on these materials.     

Study on the oxygen exchange capacities of Ce<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> pyrochlore

Ce₂Sn₂O₇ pyrochlore was synthesized by a hydrothermal method. X-ray powder diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) were used to characterize the composition and valence state of the sample. The oxygen exchange property of the Ce₂Sn₂O₇ phase was measured by an oxidation reaction in sealed air atmosphere and a followed reduction reaction in 5% H₂-95% N₂ atmosphere. Gas chromatography (GC) was used to analyze the oxygen change in the reaction. The results show that Ce₂Sn₂O₇ sample has excellent oxygen absorption capacity at 250°C as Ce³⁺ ions are oxidized to Ce⁴⁺ ions. The oxidized sample can be reduced by 5% H₂-95% N₂. The refreshed sample remains the capacity of oxygen absorption, while the oxygen exchange capacity degrades with the reduction times.     

Characteristics and performance of M-doped cerium zirconium mixed oxide nanosized catalysts (M = Zn, Sn) in CO oxidation

Nanosized Ce_0.7Zr_0.3M_x oxide particles (M=Zn, Sn, x = 0.1, 0.3, 0.5) with 10–20 nm diameter were synthesized by a coprecipitation method. Their structure and morphology were characterized by XRD, FT-Raman and TEM. Zn did not incorporate well into Ce_0.7Zr_0.3 oxide, but Sn did. The catalytic performance of these particles for CO oxidation was investigated between 150–400°C under severe conditions. Ce_0.7Zr_0.3Sn_0.5 had the best performance with the lowest light-off temperature range (175–210°C). A temperature hysteresis was observed in all catalysts studied.     

Hydrothermal synthesis, structure and property of nano-BaTiO3-based dielectric materials

A series of Ba_1-xSr_xTi_1-yZr_yO₃ (0≤x≤0.5, 0≤y≤0.4) and BA_1?xZn_xTi_1?ySn_yO₃ (0≤x≤0.3, 0≤y≤0.3) solid solutions were synthesized by low-temperature/low-pressure hydrothermal method below 170°C, 0.8 MPa. XRD pattern and cell parameters-composition figures of these prepared powders demonstrated that they are completely miscible solid solutions based on BaTiO₃. Furthermore, TEM showed that they have a shape of uniform, substantially spherical particles with an average particle size of 70 nm in diameter. The sintered ceramics of those powders doped by Sr²⁺ and Zr⁴⁺ or Zn²⁺ and Sn⁴⁺ have dielectric constant twelve times higher than and dielectric loss 1/6 those of pure BaTiO₃ phase at room temperature.     

Pt LIII-edge XANES and EXAFS studies on γ-Al2O3 supported Pt catalysts

Pt L_III-edge XANES and EXAFS were employed to investigate the nature of Pt/γ-Al₂O₃, Pt−Sn/γ-Al₂O₃ and Pt−Fe/γ-Al₂O₃ catalysts. The results indicated that Pt species on these catalysts were all in the oxidized states before reduction, and in the metallic states after reduction. The dispersity of the Pt species on the catalysts was very high after reduction. The electronic properties of the highly dispersed Pt species were different from that of the bulk Pt in large crystallites. An interaction between Pt and the metal-oxide modified γ-Al₂O₃ support is proposed. The interaction improved the dispersity of the Pt species on the catalysts and is thought to be the reason for the enhanced activity and selectivity for dehydrogenation reactions over these catalysts.     

Bi@Bi2Sn2O7/TiO2等离子体复合纤维的制备及增强的光催化产氢活性

以电纺TiO_2纳米纤维为基质,采用一步水热法合成了Bi@Bi_2Sn_2O_7/TiO_2等离子体复合纤维光催化剂。利用X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、高分辨透射电镜(HRTEM)、紫外-可见漫反射(UV-Vis DRS)和光致发光光谱(PL)等分析测试手段对样品的物相、形貌和光电性能等进行表征。以三乙醇胺为电子给体,研究了Bi@Bi_2Sn_2O_7/TiO_2复合纤维光催化裂解水制氢的反应过程。结果表明:在水热过程中,Bi_2Sn_2O_7构筑在TiO_2纳米纤维表面形成p-n结的同时,部分Bi3+被葡萄糖还原成金属Bi沉积在Bi_2Sn_2O_7上。金属Bi的等离子体共振效应与p-n结的协同作用,有效提高了样品的光催化活性,产氢速率达到7.26 mmol·h~(-1)·g~(-1)。     

Nanosized CeO2–SiO2, CeO2–TiO2, and CeO2–ZrO2 Mixed Oxides: Influence of Supporting Oxide on Thermal Stability and Oxygen Storage Properties of Ceria

The influence of SiO₂, TiO₂, and ZrO₂ on the structural and redox properties of CeO₂ were systematically investigated by various techniques namely, X-ray diffraction (XRD), Raman spectroscopy (RS), UV–Vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HREM), BET surface area, and thermogravimetry methods. The effect of supporting oxides on the crystal modification of ceria was also mainly focused. The investigated oxides were obtained by soft chemical routes with ultrahigh dilute solutions and were subjected to thermal treatments from 773 to 1073 K. The XRD results suggest that the CeO₂–SiO₂ sample primarily consists of nanocrystalline CeO₂ on the amorphous SiO₂ surface. Both crystalline CeO₂ and TiO₂-anatase phases were noted in the case of CeO₂–TiO₂ sample. Formation of cubic Ce_0.75Zr_0.25O₂ and Ce_0.6Zr_0.4O₂ (at 1073 K) were observed in the case of CeO₂–ZrO₂ sample. The cell ‘a’ parameter estimations revealed an expansion of the ceria lattice in the case of CeO₂–TiO₂, while a contraction is noted in the case of CeO₂–ZrO₂. The DRS studies suggest that the supporting oxides significantly influence the band gap energy of CeO₂. Raman measurements disclose the presence of oxygen vacancies, lattice defects, and displacement of oxide ions from their normal lattice positions in the case of CeO₂–TiO₂ and CeO₂–ZrO₂ samples. The XPS studies revealed the presence of silica, titania, and zirconia in their highest oxidation states, Si(IV), Ti(IV), and Zr(IV) at the surface of the materials. Cerium is present in both Ce⁴⁺ and Ce³⁺ oxidation states. The HREM results reveal well-dispersed CeO₂ nanocrystals over the amorphous SiO₂ matrix in the case of CeO₂–SiO₂, isolated CeO₂ and TiO₂ (A) nanocrystals and some overlapping regions in the case of CeO₂–TiO₂, and nanosized CeO₂ and Ce–Zr oxides in the case of CeO₂–ZrO₂ sample. The exact structural features of these crystals as determined by digital diffraction analysis of HREM experimental images reveal that the CeO₂ is mainly in cubic fluorite geometry. The oxygen storage capacity (OSC) as determined by thermogravimetry reveals that the OSC of mixed oxides is more than that of pure CeO₂ and the CeO₂–ZrO₂ exhibits highest OSC.     

Influence of Pd-Ce interaction and chlorine ion on hydrodesulfurization reaction: The activity and sulfur tolerance of the Pd-Ceo2/Al2O3 catalyst

CeO₂ promoted palladium catalysts supported on Al₂O₃ were prepared using the impregnation (IM) and the deposition-precipitation (DP) methods. The activities and sulfur tolerance of the catalysts for hydrodesulfurization (HDS) were detected with thiophene HDS as probe reaction. H₂ adsorption, XRD, FTIR, NH₃-TPD, XPS were used to characterize the catalysts. The Pd-CeO₂/Al₂O₃ (IM) catalyst was highly active for the HDS reaction, and it had much stronger sulfur tolerance than the Pd/Al₂O₃ catalyst. Pd-CeO₂/Al₂O₃ (DP) showed excellent sulfur tolerance while its initial activity decreased. It was observed that with the chlorine bridge, the interfacial structure of Pd-Cl⁻¹-Ce³⁺ was responsible for the high activity of the Pd-CeO₂/Al₂O₃ (IM) catalyst, at the same time the interaction of Pd with Ce was weakened by Cl₋₁ ions. The enhanced sulfur tolerance over the Pd-CeO₂/Al₂O₃ (IM) catalyst was attributed to the weakened Pd-S bond caused by the competitive adsorption of H₂S on Ce³⁺ ions. As to the Pd-CeO₂/Al₂O₃ (DP) catalyst, a strong interaction of Pd with Ce put Pd at an electron-deficient state, the creation of sulfided palladium was therefore inhibited.     

Ce3+掺杂La2O3的17O固体核磁共振研究

本文用水热共沉淀法制备Ce³⁺掺杂La₂O₃的前驱体,随后在H₂/N₂气氛下用高温煅烧法合成了不同Ce³⁺浓度的掺杂La₂O₃。由于Ce³⁺的掺杂,¹⁷O固体核磁共振谱图中在698、650和558处出现了新的共振峰;随着Ce³⁺掺杂浓度的增加,这些峰的强度也随之增强。根据谱峰位置和强度,对谱图进行了归属:698、650处的共振峰应源自与Ce³⁺相连的四配位O(OCeLa₃),558处的信号则来自于与Ce³⁺相连的六配位O(OCeLa₅)。通过¹⁷O固体核磁共振能够直接观测与Ce³⁺直接相连的O显示该方法将可能用于研究稀土掺杂氧化物功能材料。     

Revealing the Dynamic Structure of Complex Solid Catalysts Using Modulated Excitation X‐ray Diffraction

X‐ray diffraction (XRD) is typically silent towards information on low loadings of precious metals on solid catalysts because of their finely dispersed nature. When combined with a concentration modulation approach, time‐resolved high‐energy XRD is able to provide the detailed redox dynamics of palladium nanoparticles with a diameter of 2 nm in 2 wt % Pd/CZ (CZ=ceria–zirconia), which is a difficult sample for extended X‐ray absorption fine structure (EXAFS) measurements because of the cerium component. The temporal evolution of the Pd(111) and Ce(111) reflections together with surface information from synchronous diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements reveals that Ce maintains Pd oxidized in the CO pulse, whereas reduction is detected at the beginning of the O₂ pulse. Oxygen is likely transferred from Pd to Ce³⁺ before the onset of Pd re‐oxidation. In this context, adsorbed carbonates appear to be the rate‐limiting species for re‐oxidation.     

Probing the surface acidity of modified γ-alumina with1H and15N high-resolution solid state NMR spectroscopy

¹H MAS NMR and¹⁵N NMR studies of adsorbed N₂ and N₂O molecules were used to characterize Br?nsted and Lewis acidic sites of unmodified γ-Al₂O₃ and γ-Al₂O₃ modified with NaOH. Changes in the concentrations of surface hydroxyls with the increase in the number of more “basic” OH groups for NaOH/γ-Al₂O₃ have been found by¹H MAS NMR experiments. Two different types of Lewis acidic sites in γ-Al₂O₃ have been revealed using¹⁵N NMR studies. The strongest sites are poisoned even at small NaOH concentrations (ca. 0.05 wt.%). Not only the number of electron-accepting sites but also their strength are supposed to decrease for modified γ-alumina.     

Ce3+掺杂La2O3的17O固体核磁共振研究

本文用水热共沉淀法制备Ce³⁺掺杂La₂O₃的前驱体,随后在H₂/N₂气氛下用高温煅烧法合成了不同Ce³⁺浓度的掺杂La₂O₃。由于Ce³⁺的掺杂,¹⁷O固体核磁共振谱图中在698、650和558处出现了新的共振峰;随着Ce³⁺掺杂浓度的增加,这些峰的强度也随之增强。根据谱峰位置和强度,对谱图进行了归属：698、650处的共振峰应源自与Ce³⁺相连的四配位O(OCeLa₃),558处的信号则来自于与Ce³⁺相连的六配位O(OCeLa₅)。通过¹⁷O固体核磁共振能够直接观测与Ce³⁺直接相连的O显示该方法将可能用于研究稀土掺杂氧化物功能材料。     

Oberflächenchemie,Sintern und Redispergieren von Pd/Al2O3-Katalysatoren

Surface Chemistry, Sintering, and Redispersion of Pd/Al₂O₃ Catalysts Surface chemistry of Pd/Al₂O₃ has been investigated by temperature-programmed reduction, O₂ chemisorption, and u.v.-vis spectroscopy. Depending on conditions of different thermal pretreatments especially in O₂, different chlorine-free and chlorine-containing Pd compounds exist on the alumina. Sintering and redispersion of Pd are governed by properties of chlorine-free Pd oxide. The mechanism of Pd sintering consists in the thermal decomposition of a two-dimensional PdO phase; redispersion consists in formation of this phase by spreading of bulk PdO. There is no direct connection between Pd oxidation and redispersion. The discussion compares properties of Pd/Al₂O₃ and Pt/Al₂O₃.     

Effect of kcl on cucl2/γ-al2o3 catalyst for oxychlorination of ethane

Summary Effect of KCl on the structure and the catalytic properties of CuCl₂/γ-Al₂O₃ catalyst for ethane oxychlorination has been studied by means of solubility test, UV-vis spectroscopy, XRD, TPR, TEM and catalytic reaction. Addition of KCl decreases the interaction between active species CuCl₂ and γ-Al₂O₃ and increases the catalytic properties by accelerating the Cu(II) → Cu(I) reduction step.     

Oxygen desorption from polycrystalline palladium: Thermal desorption of O<Subscript>2</Subscript> from a chemisorbed layer of O<Subscript>ads</Subscript> in the course of the decomposition of PdO surface oxide and in the release of oxygen from the bulk of palladium

The desorption of oxygen from polycrystalline palladium (Pd(poly)) was studied using temperature-programmed desorption (TPD) at 500–1300 K and the amounts of oxygen absorbed by palladium (n) from 0.05 to 50 monolayers. It was found that the desorption of O₂ from Pd(poly), which occurred from a chemisorbed oxygen layer (O_ads), in the release of oxygen from a near-surface metal layer in the course of the decomposition of PdO surface oxide, and in the release of oxygen from the bulk of palladium (O_abs), was governed by repulsive interactions between O_ads atoms and the formation and decomposition of O_ads-Pd*-O_abs structures (Pd* is a surface palladium atom). At θ ≤ 0.5, the repulsive interactions between O_ads atoms (ɛ_aa = 10 kJ/mol) resulted in the desorption of O₂ from Pd(poly) at 650–950 K. At 0.5 ≤ n ≤ 1.0, the release of inserted oxygen from a near-surface palladium layer occurred during TPD in the course of the migration of O_abs atoms to the surface and the formation-decomposition of O_ads-Pd*-O_abs structures. As a result, the desorption of O₂ occurred in accordance with a first-order reaction with a thermal desorption (TD) peak at T _max ∼ 700 K. At 1.0 ≤ n ≤ 2.0, the decomposition of PdO surface oxide occurred at a constant surface cover-age with oxygen during TPD in the course of the formation-decomposition of O_ads-Pd*-O_abs structures. Because of this, the desorption of O₂ occurred in accordance with a zero-order reaction at low temperatures with a TD peak at T _max ∼ 675 K. At 1.0 ≤ n ≤ 50, oxygen atoms diffused from deep palladium layers in the course of TPD and arrived at the surface at high temperatures. As a result, O₂ was desorbed with a high-temperature TD peak at T > 750 K.