Titanium tetra-<Emphasis Type="Italic">tert</Emphasis>-butoxide-<Emphasis Type="Italic">tert</Emphasis>-butyl hydroperoxide oxidizing system: Physicochemical and chemical aspects

The reaction of titanium tetra-tert-butoxide with tert-butyl hydroperoxide (1: 2) (C₆H₆, 20 C) involves the steps of formation of the titanium-containing peroxide (t-BuO)₃TiOOBu-t and peroxytrioxide (t-BuO)₃TiOOOBu-t. The latter decomposes with the release of oxygen, often in the singlet form, and also homolytically with cleavage of both peroxy bonds. The corresponding alkoxy and peroxy radicals were identified by ESR using spin traps. The title system oxidizes organic substrates under mild conditions. Depending on the substrate structure, the active oxidant species can be titanium-containing peroxide, peroxytrioxide, and oxygen generated by the system.     

Low-temperature oxidation of 3,6-di-tert-butyl-o-benzoquinone and 3,6-di-tert-butylpyrocatechol with tert-butyl hydroperoxide in the presence of aluminum, titanium, and zirconium tert-butylates

Systems consisting of metal (Al, Ti, Zr) tert-butylate and tert-butyl hydroperoxide oxidize 3,6-di-tert-butyl-o-benzoquinone under mild conditions (room temperature, benzene). With (t-BuO)₃Al and (t-BuO)₄Zr, the major reaction products are 5-hydroxy-3,6-di-tert-butyl-2,3-epoxy-p-benzoquinone, and with (t-BuO)₄Ti, 2-hydroxy-3,6-di-tert-butyl-p-benzoquinone. Under the conditions of this reaction, 3,6-di-tert-butylpyrocatechol initially transforms into 3,6-di-tert-butyl-o-benzoquinone. The reactions involve metalcontaining peroxides.     

Oxidizing properties of the tert-butyl hydroperoxide-tetra-tert-butoxychromium system

tert-Butyl hydroperoxide reacts with the tetra-tert-butoxychromium by oxidizing the latter to chromyl CrV=O (C₆H₆, 20°C). At t-BuOOH-Cr(OBu-t)₄ ratio of 2: 1 or higher, oxygen is released. The occuring processes include the formation of chromium-containing peroxides and peroxytrioxydes. The t-BuOOH-Cr(OBu-t)₄ system oxidizes aromatic hydrocarbons of various structures (anthracene, 9,10-dimethylanthracene, 1,1-diphenylethylene, alkylarenes), as well as primary and secondary alcohols. Depending on the structure of the substrate, the oxidants are: in situ generated oxygen including that in the singlet state, peroxy radicals, or chromium-containing peroxides.     

System vanadium alkoxy compound-<Emphasis Type="Italic">tert</Emphasis>-butyl hydroperoxide-oxidant of hydrocarbon C-H bonds

Vanadium alkoxy compounds [(t-BuO)₄V, (t-BuO)₃VO] react with tert-butyl hydroperoxide (C₆H₆, 20°C) to liberate oxygen, partly in the singlet form, and to form alkoxyl and peroxyl radicals via the intermediacy of vanadium peroxides and trioxide. These systems are capable of oxidizing hydrocarbon C-H bonds. The process is radical in nature and involves formation of carbon-centered radicals and their reaction with oxygen generated in the systems. Vanadium-containing peroxides, too, take part in the oxidation reaction.     

Heterogenization of a molybdenum Schiff base complex as a magnetic nanocatalyst: An eco-friendly,efficient, selective and recyclable nanocatalyst for the oxidation of alkenes

A Schiff base ligand derived from 5-bromo-2-hydroxybenzaldehyde and 2,2′-dimethylpropylenediamine (H₂L) and its corresponding dioxomolybdenum(VI) complex (Mo(O)₂L) has been synthesized and characterized by spectroscopic methods. The adsorption of Mo(O)₂L on the surface of silica-coated magnetite nanoparticles via hydrogen bonding led to the formation of (α-Fe₂O₃)–MCM-41–Mo(O)₂L as a heterogeneous catalyst. FT-IR and atomic absorption spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to characterize and investigate the new nanocatalyst. A practical catalytic method for the efficient and highly selective oxidation of a wide range of olefins with hydrogen peroxide and tert-butyl hydroperoxide in ethanol over the prepared molybdenum nanocatalyst was investigated. Under reflux conditions, the oxidation of cyclooctene with tert-butyl hydroperoxide or hydrogen peroxide led to the formation of epoxide as the sole product. The catalyst was reused at least six times without a significant decrease in catalytic activity or selectivity, and without detectable leaching of the catalyst.     

ESR study of the thermal decomposition of di-tert-butoxy-tert-butyl alumotrioxide formed in the reaction of tri-tert-butoxyaluminum with tert-butyl hydroperoxide

Tri-tert-butoxyaluminum reacts with tert-butyl hydroperoxide to produce di-tert-butoxy-tert-butyl alumotrioxide, which decomposes heterolytically to form singlet dioxygen and homolytically with the O—O bond cleavage. The Bu^tOO^·, (Bu^tO)₂AlOO^·, Bu^tO^·, and (Bu^tO)₂AlO^· radicals were identified by ESR using spin traps. These findings confirm the formation of aluminum-containing trioxide. The above radicals initiate alkylarene oxidation by the tri-tert-butoxyaluminum—tert-butyl hydroperoxide system. The carbon-centered and alkylperoxy radicals originated from the oxidized substrates were identified.     

Liquid-phase oxidation of sulfides by an aluminum (and titanium) <Emphasis Type="Italic">tert</Emphasis>-butoxide—<Emphasis Type="Italic">tert</Emphasis>-butyl hydroperoxide system

A system aluminum (and titanium) tert-butoxide—tert-butyl hydroperoxide (1 : 2) under mild conditions (20 °C, 1 h) oxidizes aliphatic and alkylaromatic sulfides and diphenyl sulfide to the corresponding sulfones in yields close to 100%. The oxidation is induced by electron-excited dioxygen formed upon thermal decomposition of intermediate metal-containing peroxy trioxides (ozonides). The latter are formed as a result of the reversible reaction of aluminum or titanium tert-butoxides with tert-butyl hydroperoxide followed by the interaction of di-tert-butoxy-tert-butylperoxyaluminum and tri-tert-butoxy-tert-butylperoxytitanium that formed with another Bu^tOOH molecule. Aluminum-containing peroxide (Bu^tO)₂AlOOBu^t oxidizes sulfides to sulfoxides.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1663–1668, August, 2004.     

Mo(CO)6-Catalyzed oxidation of furan derivatives to E- and Z-enediones by cumyl hydroperoxide

E- and Z-Enediones are easily accessible by controlled oxidation of 2,5-disubstituted furans with Mo(CO)₆/cumyl hydroperoxide system. The use of t-butyl hydroperoxide, as oxygen donor, leads to the formation of 2H-pyran-3(6H)-one derivatives.     

Direct electrochemistry and electrocatalysis of heme proteins immobilized in single-wall carbon nanotubes-surfactant films in room temperature ionic liquids

Amperometric biosensors were prepared by immobilizing heme proteins in single-wall carbon nanotubes (SWCNTs)-cetyltrimethyl ammonium bromide (CTAB) surfactant films based on 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) as nonaqueous electrolyte. The electrochemistry and electrocatalysis of protein-SWCNTs-CTAB films were investigated. A pair of well-defined and nearly reversible redox peaks was observed when the heme protein films were immersed into [bmim][PF₆]. Moreover, the electrocatalytic activity of heme proteins for two model peroxides compounds (hydrogen peroxide (H₂O₂) and tert-butyl hydroperoxide (t-BuOOH)) was observed. Some electrocatalytic parameters for heme proteins were calculated. Compared with the detection results of t-BuOOH in other organic solvents, kinetic analysis in this experiment indicates that heme protein-SWCNTs-CTAB films operated in ionic liquid provide a higher affinity and sensitivity.     

Liquid-phase oxidation of tert-butyldimethylsilane

Kinetics and mechanism of liquid-phase oxidation of tert-butyldimethylsilane t-BuMe₂SiH with molecular oxygen in the temperature range 297–350K were studied. Reaction orders in silane, initiator, and oxygen were evaluated. The major product of the oxidation of t-BuMe₂SiH is tert-butyldimethylsilyl hydroperoxide t-BuMe₂SiOOH. It was shown for the first time that the major reaction product is a silyl hydroperoxide. A kinetic scheme of the oxidation of t-BuMe₂SiH is offered and discussed.Translated from Zhurnal Obshchei Khimii, Vol. 74, No. 10, 2004, pp. 1625–1630.Original Russian Text Copyright © 2004 by Lutsik-Maksim, Timokhin, Zaborovskii, Pristanskii, Turovskii, Chatgilialoglu.This revised version was published online in April 2005 with a corrected cover date.     

Oxidation of polypropylene in benzene solution

The oxidation of both amorphous and crystalline polypropylene in benzene solution was studied at 100–130°C. tert-Butyl peroxide was used as an initiator. The kinetic behavior of the amorphous and crystalline forms differs slightly; the oxidation rate of the amorphous type is slower for a given polymer and initiator concentration. The oxidation rate of solutions of the crystalline form can be simply described by the expression: R₀ = 1.87 × 10¹³ exp {?29,000/RT} [t-Bu₂O₂]^0.58[polypropylene]^0.73, mole/l.-min. Product analyses of the oxidized solutions are incomplete, but the results do show that only ～40% of the absorbed oxygen is present as hydroperoxide. Further, much of the hydroperoxide is present in low molecular weight polar fragments which are acetone-soluble. These results show that oxidized polypropylene cannot be regarded simply as “polypropylene hydroperoxide” with repeating hydroperoxide groups attached to the polymer chain in 1,3,5… (tertiary) positions.     

Interaction of the Negishi reagent Cp2ZrBun 2 with 1,4-bis(tert-butyl)butadiyne

The interaction of the Negishi reagent Cp₂ZrBuⁿ ₂ with 1,4-bis(tert-butyl)butadiyne Bu^tC≡C-C≡CBu^t leads to four products: a five-membered zirconacyclocumulene complex Cp₂Zr(η⁴-Bu^tC₄Bu^t) (2) synthesized earlier by another method, the previously unknown seven-membered zirconacyclocumulene Cp₂Zr[η⁴-Bu^tC₄(Bu^t)-C(C₂Bu^t)=CBu^t] (3) as well as small amounts of the zirconocene binuclear butatrienyl complex Cp₂(Buⁿ)Zr(Bu^tC₄Bu^t)Zr(Buⁿ)Cp₂ (4), and the dimeric acetylide [Cp₂ZrC≡CBu^t]₂ (5). The structure of complexes 2–5 was established by X-ray diffraction studies.     

Über die Oxo‐cyclotetraphosphane (PBut)4O1–4

Contributions to the Chemistry of Phosphorus. 243 On the Oxocyclotetraphosphanes (PBu^t)₄O_1–4 Under suitable conditions, the reaction of tetra‐tert‐butylcyclotetraphosphane, (PBu^t)₄, with dry atmospheric oxygen gives rise to the corresponding monoxide (PBu^t)₄O ( 1 ) which has been isolated by column chromatography. The reaction with hydrogen peroxide furnishes a mixture of oxocyclotetraphosphanes (PBu^t)₄O_1–4 consisting of two constitutionally isomeric dioxides (PBu^t)₄O₂ ( 2 a , 2 b ), the trioxide (PBu^t)₄O₃ ( 3 ), and the tetraoxide (PBu^t)₄O₄ ( 4 ), in addition to 1 . According to the ³¹P NMR parameters the oxygen atoms are exclusively exocyclically bonded to the phosphorus four‐membered ring. Which of the P atoms are present as λ⁵‐phosphorus follows from the different low‐field shifts of the individual P nuclei compared with the starting compound. Accordingly, 1 is 1,2,3,4‐Tetra‐tert‐butyl‐1‐oxocyclotetraphosphane, 2 a and 2 b are 1,2,3,4‐Tetra‐tert‐butyl‐1,2‐dioxo‐ and ‐1,3‐dioxocyclotetraphosphane, respectively, 3 is 1,2,3,4‐Tetra‐tert‐butyl‐1,2,3‐trioxocyclotetraphosphane, and 4 is 1,2,3,4‐Tetra‐tert‐butyl‐1,2,3,4‐tetraoxocyclotetraphosphane. When the oxidation reaction proceeds a fission of the P₄ ring takes place.     

Synthesis of 1,2,3,4-tetrazine 1,3-dioxides annulated with 1,2,3-triazoles and 1,2,3-triazole 1-oxides

1,2,3,4-Tetrazine 1,3-dioxides annulated with 1,2,3-triazoles and 1,2,3-triazole 1-oxides have been synthesized by the reaction of 4-amino-5-(tert-butyl-NNO-azoxy)-2-R-2H-1,2,3-triazoles (R=Me, i-Pr, t-Bu) and their 1-oxides (R=H, Me, Et, i-Pr) with the HNO₃/H₂SO₄/Ac₂O system. Their thermal stability, spectroscopic, and X-ray properties have been studied.     

2-Alkyl-4-amino-5-(tert-butyl-NNO-azoxy)-2H-1,2,3-triazole 1-oxides: synthesis and reduction

A new approach to the synthesis of 4-amino-5-(tert-butyl-NNO-azoxy)-2-R-2H-1,2,3-triazole 1-oxides 1 was developed. Compounds 1 were obtained by reactions of 3-amino-4-(tert-butyl-NNO-azoxy)furoxan with aliphatic amines RNH₂ (R = Me, Et, Prⁱ, Bu, and Bu^t). 4-Amino-5-(tert-butyl-NNO-azoxy)-2-tert-butyl-2H-1,2,3-triazole 1-oxide was transformed under the action of acids into 4-amino-5-(tert-butyl-NNO-azoxy)-1-hydroxy-1H-1,2,3-triazole. Methylation of the latter with diazomethane mainly involves the O atom of the triazole oxide ring. Reduction of compounds 1 gave 4-amino-5-(tert-butyl-NNO-azoxy)-2-R-2H-1,2,3-triazoles and 4-amino-5-(tert-butyldiazenyl)-2-R-2H-1,2,3-triazoles (R = Me, Prⁱ, and Bu^t). The structures of the compounds obtained were confirmed by ¹H, ¹³C, and ¹⁴N NMR spectroscopy.     

Synthesis of new (+)-usnic acid derivatives with the flavone structure

Reactions of a chalcone derivative (synthesized earlier from usnic acid) with various oxidants (hydrogen peroxide, tert-butyl hydroperoxide, and dichlorodicyanobenzoquinone) gave new flavonols, dihydroflavonols, and flavones. Treatment of the starting chalcone with a nucleophilic reagent (NH₂NH₂·H₂O) afforded a dihydropyrazole-containing derivative.     

Effect of the hydrogen peroxide concentration in stereospecific oxidation of alkanes by models of non-heme oxygenases

The biomimetic oxidation of alkanes (cyclohexane, adamantane, cis-1,2-dimethylcyclohexane) with hydrogen peroxide catalyzed by Fe(II) complexes containing tetradentate nitrogen ligands (M = [Fe(bpmen)(MeCN)₂](ClO₄)₂ (bispicolyl-1,2-dimethylethylenediamine), [Fe(bpen)(MeCN)₂](ClO₄)₂ (bispicolylethylenediamine), and [Fe(tpcaH)(MeCN)₂]₂(ClO₄)₄ (tripyridylcarboxamide) is studied. The effects of the hydrogen peroxide concentration on the alcohol/ketone (A/K) ratio and on the regioselectivity of oxidation (3/2) are discovered. Rather high stereospecificity (RC = 96–99%) persisting at high hydrogen peroxide concentrations is hardly consistent with the participation of the HO^. radical, inferred from the rather low regioselectivity and low A/K ratio observed under these conditions. The molecular mechanism of oxygen transfer from hydrogen peroxide, which was earlier proved reliably for low concentrations of hydrogen peroxide ([H₂O₂]/[M] ? 10), can be applied to high peroxide concentrations ([H₂O₂]/[M] > 10) if a new ferryl species containing two equivalents of the oxidant is assumed to be involved in the process. This assumption is confirmed by the direct stereospecific formation of alkyl hydroperoxide from alkane at a high concentration of hydrogen peroxide.     

Synthesis,structural characterization,and thermal properties of zirconium(IV) <Emphasis Type="Italic">β</Emphasis>-ketodiester complexes

Mono- and bi-nuclear Zr(IV) β-ketodiester complexes of general formulas [Zr(dtbacdc)₄] (1), [Zr(dmacdc)₃(OⁱPr)]₂ (2), and [Zr(dtbacdc)₃(OⁱPr)]₂ (3), (dtbacdc = di-tert-butyl-1,3-acetonedicarboxylato and dmacdc = dimethyl-1,3-acetonedicarboxylato ligands) were successfully isolated, when zirconium(IV) isopropoxide reacted with the four- ((1)) or twofold ((2), (3)) excess of di-alkyl 1,3-acetonedicarboxylates (CO(CH₂COOR′)₂, R′ = Me, ^tBu). Analysis of single-crystal X-ray diffraction data showed that (1) crystallizes in the monoclinic system (C 2/c (no. 15)). The structure of this compound consists of monomers, which are composed of Zr(IV) ions surrounded by eight oxygen atoms derived from four chelating β-ketodiester ligands. The stoichiometry and the bi-nuclear structure of (2) and (3) using spectroscopic methods (IR and NMR), and mass spectrometry have been determined. Thermal analysis and variable temperature IR (VT-IR) spectroscopy have been used to study the thermal stability and thermal decomposition pathway of synthesized Zr(IV) compounds.     

Stabilizing influence of perfluoro-tert-butanol on α-keto radicals — the derivatives of perfluorinated α-diketones: quantum-chemical calculations of the formed complexes

Density functional theory calculations show that the heightened stability of α-keto radicals, the derivatives of perfluorinated α-diketones of general formula CF₃C(O)C(O)R^F (R^F = i-C₃F₇; t-C₄F₉), in perfluoro-tert-butanol can be caused by the H-bond-imposed formation of cation radicals of vicinal dienols.     

Photocrosslinking of poly(2,3-epithiopropyl methacrylate) by the oxidation of pendant episulfide groups

In the photocrosslinking of poly(2,3-epithiopropyl methacrylate) (PETMA) films the effect of the pendant episulfide group's oxidation on the crosslinking of PETMA was investigated. Thermal crosslinking of PETMA is promoted by peroxides such as benzoyl peroxide and hydrogen peroxide. IR spectrum of the crosslinked PETMA showed that the reaction proceeded through the oxidation of episulfide groups by the peroxides. The anthracene (An) sensitized photocrosslinking of PETMA films also proceeded via the oxidation of episulfide groups by singlet oxygen. It was found that residual tetrahydrofuran (THF) in the films remarkably increased the rate of the photocrosslinking and/or reduced the induction period. From the further investigation concerning casting solvents it was found that residual CS₂, CCl₄, and CHCl₃ in films increased the rate of the photocrosslinking and/or reduced the induction period of the photocrosslinking. The disappearance rate of An in the films was also increased by the presence of residual CS₂, CCl₄, and CHCl₃, differring from the result of THF. These results were explained by a difference in lifetime of singlet oxygen in the films. From the results were explained by a difference in lifetime of singlet oxygen in the films. From the results concerning the effects of hydroperoxides such as THF hydroperoxide and t-butyl hydroperoxide on the photocrosslinking of PETMA films the acceleration effect of the residual THF was deduced to be due to the promotion of singlet oxygen-oxidation of sulfide groups by protic compounds such as THF hydroperoxide and H₂O in the THF.