对重力加速度几种测量方法的比较研究

重力加速度g是物理学中的一个重要物理量, 它受物体所处位置的纬度、 海拔以及地质构造等因素影 响. 因此, 不同地区的g值一般都不相同. 就本科阶段的g值测量方法进行归纳总结, 结合实验室所能提供的仪器, 从单摆法、 自由落体运动法、 倾斜气垫导轨法以及平衡法4个测量g值的实验出发, 通过对其实验原理、 器材选择、 实验数据处理以及误差分析等方面进行比较和研究, 找出适合昆明地区实验室测量g值的最佳方法     

在不同转角下测量圆盘的转动惯量产生误差的研究

由于实验用三线摆法测定物体转动惯量的转角较大,但是理论推出的转角一般控制在5度以内,故现采用投影法和平均值计算转角的方法来研究在不同转角下测量圆盘的转动惯量产生的误差,并分析圆盘转动惯量测量值与理论值的百分差与转角之间的关系,最后得出圆盘转动惯量测量值与理论值的百分差随转角变化成二次曲线。     

光电效应演示实验方法的探讨

1 引言 光电效应演示实验是普物的重要实验,但按紫外线照射锌板的方法难以成功,其原因为     

牛顿环实验数据处理的最佳方法

本文用几种不同的方法对牛顿环测平凸透镜曲率半径的数据进行了处理，得出了加权平均法是处理该数据的最佳方法。     

采用相位法与极大值法测量超声波声速的准确度的研究

对极值法和相位法测量超声波声速的准确度问题进行了研究,实验与理论分析证明:相位法测量波长比极值法准确度要高.在与简谐运动有关的测量中,测量最大变化率点常常比测量最大值点的准确度要高,这在其他物理实验中也适用.     

动态平衡问题的分析方法归类与剖析

本文针对动态平衡问题, 归纳了一些题目的特点及处理方法, 使得学生在分析此类问题时, 能提供有效 的解题思路, 培养学生系统分析物理问题的能力     

蛋白质分子三维结构能量优化途径的选择

NMR方法是研究溶液中蛋白质的三维结构的重要手段,本文以BUSH ⅡA为例,对用度量矩阵距离几何法获得的初始三维结构进行了能量优化,主要探讨了蛋白质分子三维结构能量优化途径的选择问题.本文把优化过程分为三个阶段,分别采用不同的优化方式,使分子结构得到优化,对于分子量在8000左右的蛋白质而言,本方法能够获得较好符合核磁实验约束条件的分子低能构象.     

分光计的分步调节法

利用＂镜外法＂和＂最高最低位置法＂相结合的调节方法,使分光仪的调整更为简便、较适合初学者。     

齐次平衡法、Weiss-Tabor-Carnevale法及Clarkson-Kruskal约化法之间的联系

扩充齐次平衡法的应用范围,用于寻找非线性数学物理方程的Bcklund变换和相似约化,其结果分别等同于Weiss-Tabor-Carnevale (WTC) 法及Clarkson-Kruskal (CK) 法结果,并从理论上进一步说明三种方法之间的密切联系. 关键词： 齐次平衡法 WTC法 CK约化法     

基于保角映射的镜像法的应用

将镜像法与保角变换法相结合,求解复杂形状边界的二维边值问题,得出电场分布规律,并通过Matlab数据处理软件的数值计算功能进行数值模拟,绘制出其电场线与等势线(面)分布图,验证了所得结论的正确性.此方法拓展了镜像法的应用范围,为求解边界形状复杂的二维静电场的边值问题提供了一种新的思路和途径.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.