Bimetallic nickel complexes of macrocyclic tetraiminodiphenols and their ethylene polymerization

Schiff’s base condensation of 2,6-diformyl-4-R-phenol and affords 34-membered macrocyclic tetraiminodiphenol compounds, (R = H and R′ = iPr, 1; R = Me and R′ = iPr, 2; R = F and R′ = iPr, 3; R = Me and R′ = Et, 4; R = F and R′ = Et, 5) in good yields (47-62%), from which dinuclear nickel complexes, (R = H and R′ =  iPr, 6; R = Me and R′ = iPr, 7; R = F and R′ = iPr, 8) are prepared. Molecular structures of 2, dipotassium salt of 1, and 7 were confirmed by X-ray crystallography. Addition of B(C₆F₅)₃ to a toluene solution of 6-8 gives insoluble precipitates which show good activity for ethylene polymerization.     

Fe(II) and Co(II) pyridinebisimine complexes bearing different substituents on ortho- and para-position of imines: synthesis, characterization and behavior of ethylene polymerization

A series of 2,6-bis(imino)pyridyl iron(II) and cobalt(II) complexes [2,6-(ArNCMe)₂C₅H₃N]MCl₂ (Ar = 2,6-i-Pr₂C₆H₃, M = Fe: 3a, M = Co: 4a; Ar = 2,4,6-i-Pr₃C₆H₂, M = Fe: 3b, M = Co: 4b; Ar = 2,6-i-Pr₂-4-BrC₆H₂, M = Fe: 3c, M = Co: 4c; Ar = 2,4-i-Pr₂-6-BrC₆H₂, M = Fe: 3d, M = Co: 4d) has been synthesized, characterized, and investigated as precatalysts for the polymerization of ethylene in the presence of modified methylaluminoxane (MMAO). The substituents of pyridinebisimine ligands and their positions located significantly influence catalyst activity and polymer property. It is found that the catalytic activities of the iron complexes/MMAO systems are mainly dominated by electronical effect, while those of the cobalt complexes/MMAO systems are primarily controlled by hindering effect.     

Reactivity of diacetylplatinum(II) complexes: Oxidative addition of halogens and hydrogen halides

Diacetylplatinum(II) complexes [Pt(COMe)₂()] ( = bpy, 3a; 4,4′-t-Bu₂-bpy, 3b), obtained by the reaction of [Pt(COMe)₂X(H)()] with NaOH in CH₂Cl₂/H₂O, were found to undergo oxidative addition reactions with halogens (Br₂, I₂) yielding the platinum(IV) complexes (trans, OC-6-13)/(cis, OC-6-32) [Pt(COMe)₂X₂()] ( = bpy, X = Br, 4a/4b; I, 4c/4d;  = 4,4′-t-Bu₂-bpy, X = Br, 4e/4f; I, 4g/4h). The diastereoselectivity of the reactions proved to be strongly dependent on the solvent. The oxidative addition of (SCN)₂ resulted in the formation of (OC-6-13)-[Pt(COMe)₂(SCN)₂()] ( = bpy, 4i; 4,4′-t-Bu₂-bpy, 4j). In a reaction the reverse of their formation, the diacetylplatinum(II) complexes 3 underwent oxidative addition with anhydrous HX (X = Cl, Br, I), prepared in situ from Me₃SiX/H₂O, yielding diacetyl(hydrido)platinum(IV) complexes [Pt(COMe)₂X(H)()] ( = bpy, X = Cl, 5a; Br, 5b; I, 5c;  = 4,4′-t-Bu₂-bpy, X = Cl, 5d; Br, 5e; I, 5f). Furthermore, diacetyldihaloplatinum complexes 4 were found to undergo reductive elimination reactions in boiling methanol yielding acetylplatinum(II) complexes [Pt(COMe)X()] ( = bpy, X = Br, 6b; I, 6c;  = 4,4′-t-Bu₂-bpy, X = Br, 6e; I, 6f). All complexes were characterized by microanalysis, IR and ¹H and ¹³C NMR spectroscopy. Additionally, the bis(thiocyanato) complex 4j was characterized by single-crystal X-ray diffraction analysis.     

Nickel (II) complexes with β-enaminoketonato chelate ligands: Synthesis, solid-structure characterization and reactivity toward the addition polymerization of norbornene

Based on two β-enaminoketonato ligands [ArNC(CH₃)C(H)C(CF₃)OH] (L₁, Ar = 2,6-Me₂C₆H₃; L₂, Ar = 2,6-i-Pr₂C₆H₃), their mono(β-enaminoketonato)nickel (II) complexes [(ArNC(CH₃)C(H)C(CF₃)O)Ni(Ph)(PPh₃)] (1, Ar = 2,6-Me₂C₆H₃; 3, Ar = 2,6-i-Pr₂C₆H₃) and bis(β-enaminoketonato)nickel (II) complexes [(ArNC(CH₃)C(H)C(CF₃)O)₂Ni] (2, Ar = 2,6-Me₂C₆H₃; 4, Ar = 2,6-i-Pr₂C₆H₃) have been synthesized and characterized. The molecular structures of complex 1, 2 and 4 have been confirmed by single-crystal X-ray analyses. After being activated with methylaluminoxane (MAO) these catalytic precursors 1-4 could polymerize norbornene to afford addition-type polynorbornene (PNB). Interestingly, catalytic activities and PNB productivity were greatly enhanced due to the introduction of strong electron-withdrawing group - trifluoro methyl into the ligands. Catalytic activities, polymer yield, M_w and M_w/M_n of PNB have been investigated under various reaction conditions.     

Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

Transition-metal complexes of phenoxy-imine ligands modified with pendant imidazolium salts: Synthesis, characterisation and testing as ethylene polymerisation catalysts

Reaction between 3-((1R,2R)-2-{[1-(3,5-di-tert-butyl-2-hydroxy-phenyl)-meth-(E)-ylidene]-amino}-cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1a) or the derivative 3-((1R,2R)-2-{[1-(2-hydroxy-5-nitro-phenyl)-meth-(E)-ylidene]-amino}-cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1b) and metal halides MCl_x.yTHF (M = Zr, x = 4, y = 2; M = V, x = y = 3; M = Cr, x = y = 3), in THF, at −78 °C gives the metal complexes of general formula [MCl_x(κ²-N,O-OC₆H₂R¹R²C(H)N-C₆H₁₀-Im)₂][Br]₂ (where M = Zr, x = 2, R¹ = R² = ^tBu, 2; M = Zr, x = 2, R¹ = H, R² = NO₂, 3; M = V, x = 1, R¹ = R² = ^tBu, 4; M = Cr, x = 1, R¹ = R² = ^tBu, 5; M = Fe, x = 0, R¹ = R² = ^tBu, 6; Im = 1-isopropyl-4-phenyl-3H-imidazol-1-ium-3-yl). ¹H and ¹³C NMR spectroscopy of 2 and 3 indicate κ²-N,O-ligand coordination via the phenoxy-imine moiety with pendant imidazolium salt that is corroborated by a single crystal structure of 6. Compounds 2, 3, 4 and 5 were tested as precatalysts for ethylene polymerisation in the presence of methylaluminoxane (MAO) cocatalyst, showing low activity. Selected polymer samples were characterised by GPC showing multimodal molecular weight distributions.     

Synthesis, characterization, and norbornene polymerization of η-benzylnickel(II) complexes of N-heterocyclic carbenes

Neutral η¹-benzylnickel carbene complexes, [Ni(η¹-CH₂C₆H₅)(IiPr)(PMe₃)(Cl)] (3) (IiPr = 1,3-bis-(2,6-diisopropylphenyl)imidazol-2-ylidene) and [Ni(η¹-CH₂C₆H₅)(SIiPr)(PMe₃)(Cl)] (4) (SIiPr = 1,3-bis-(2,6-diisopropylphenyl)imidazolin-2-ylidene), were prepared by the reaction between [Ni(η³-CH₂C₆H₅)(PMe₃)(Cl)] and an equivalent amount of the corresponding free N-heterocyclic carbene. The preparation of η³-benzylnickel carbene complexes, [Ni(η³-CH₂C₆H₅)(IiPr)(Cl)] (5) and [Ni(η³-CH₂C₆H₅)(SIiPr)(Cl)] (6) were carried out by the abstraction of PMe₃ from 3 and 4 by the treatment of B(C₆F₅)₃. The treatment of AgX on 5 and 6 produced the anion-exchanged complexes, [Ni(η³-CH₂C₆H₅)(NHC)(X)] (7, NHC = IiPr, X = O₂CCF₃; 8, NHC = IiPr, X = O₃SCF₃; 9, NHC = SIiPr, X = O₂CCF₃; 10, NHC = SIiPr, X = O₃SCF₃). The solid state structures of 3 and 10 were determined by X-ray crystallography. The η³-benzyl complexes of IiPr (5, 7, and 8) alone, in the absence of any activators such as borate and MAO, showed good catalytic activity towards the vinyl-type norbornene polymerization. The catalyst was thermally robust and the activity increases as the temperature rises to 130 °C.     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

Diiron-aminocarbyne complexes with amine or imine ligands: C-N coupling between imine and aminocarbyne ligands promoted by tolylacetylide addition to [Fe2{μ-CN(Me)R}(μ-CO)(CO)(NHCPh2)(Cp)2][SO3CF3]

A terminally coordinated CO ligand in the complexes [Fe₂{μ-CN(Me)R}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (R = Me, 1a; R = Xyl, 1b; Xyl = 2,6-Me₂C₆H₃), is readily displaced by primary and secondary amines (L), in the presence of Me₃NO, affording the complexes [Fe₂{μ-CN(Me)R}(μ-CO)(CO)(L)(Cp)₂][SO₃CF₃] (R = Me, L = NH₂Et, 4a; R = Xyl, L = NH₂Et, 4b; R = Me, L = NH₂Prⁱ, 5a; R = Xyl, L = NH₂Prⁱ, 5b; R = Xyl, L = NH₂C₆H₁₁, 6; R = Xyl, L = NH₂Ph, 7; R = Xyl, L = NH₃, 8; R = Me, L = NHMe₂, 9a; R = Xyl, L = NHMe₂, 9b; R = Xyl, = NH(CH₂)₅, 10). In the absence of Me₃NO, NH₂Et gives addition at the CO ligand of 1b, yielding [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(O)NHEt}(Cp)₂] (11). Carbonyl replacement is also observed in the reaction of 1a-b with pyridine and benzophenone imine, affording [Fe₂{μ-CN(Me)R}(μ-CO)(CO)(L)(Cp)₂][SO₃CF₃] (R = Me, L = Py, 12a; R = Xyl, L = Py, 12b; R = Me, L = HNCPh₂, 13a; R = Xyl, L = HNCPh₂, 13b). The imino complex 13b reacts with p-tolylacetylide leading to the formation of the μ-vinylidene-diaminocarbene compound [Fe₂{μ-η¹:η²- CC(Tol)C(Ph)₂N(H)CN(Me)(Xyl){(μ-CO)(CO)(Cp₂)] (15) which has been studied by X-ray diffraction.     

Electronically variable imino-phenanthrolinyl-cobalt complexes; synthesis, structures and ethylene oligomerisation studies

The 2-imino-1,10-phenanthroline ligands, 1,10-C₁₂H₇N₂-2-CRN(2,6-i-Pr₂-4-R¹-C₆H₂) [R = R¹ = H (L1); R = H, R¹ = Br (L2); R = H, R¹ = CN (L3); R = H, R¹ = i-Pr (L4); R = Me, R¹ = H (L5); R = Me, R¹ = i-Pr (L6)], have been prepared in high yield from the condensation reaction of 1,10-C₁₂H₇N₂-2-CRO (R = H, Me) with one equivalent of the corresponding 4-substituted 2,6-diisopropylaniline. The molecular structures of L2, L5 and L6 reveal the imino nitrogen atoms to adopt a transoid configuration with respect to the phenanthrolinyl nitrogen atoms. Treatment of Lx with one equivalent of CoCl₂ in n-BuOH at 90 °C gives the high spin complexes, (Lx)CoCl₂ [Lx = L1 (1a), L2 (1b), L3 (1c), L4 (1d), L5 (1e), L6 (1f)], in which the metal centres exhibit distorted square pyramidal geometries. Activation of 1a-1f with excess methylaluminoxane (MAO) gives catalysts that are modestly active for the oligomerisation of ethylene affording mainly linear α-olefins along with some degree of internal olefins. While the donor capability of the 4-position of the N-aryl group does not appear to affect the activity of the catalyst, it does have an influence on the ratio of α-olefins to internal olefins. Single crystal X-ray diffraction studies have been performed on L2, L5, L6, 1a, 1c and 1f.     

The (phosphino)tetraphenylborate ligand in ruthenium-arene chemistry

The synthesis of a series of anionic half-sandwich ruthenium-arene complexes [E][RuCl₂(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (E = Bu₄N⁺: R = Ph, 1a, ⁱPr, 1b or Cy, 1c; E = bis(triphenylphosphine)iminium or PNP⁺: R = Ph, 1a′, ⁱPr, 1b′ or Cy, 1c′) are reported. X-ray crystallographic studies of 1a′ and 1b′ confirmed the three-legged piano-stool coordination geometry. In solution, complexes 1a-c and 1a′-c′ are proposed to form monomer-dimer equilibria as a result of chloride ligand dissociation. Complexes 1a-c and 1a′-c′ also form the formally neutral zwitterionic complexes [RuCl(L)(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (L = pyridine: R = Ph, 2a, ⁱPr, 2b or Cy, 2c; L = MeCN: R = Ph, 3a, ⁱPr, 3b or Cy, 3c) via chloride ligand abstraction using AgNO₃ or MeOTf.     

Syntheses and molecular structures of some compounds containing many-atom chains end-capped by tricobalt carbonyl clusters

Several complexes containing Co₃ carbonyl clusters end-capping carbon chains of various lengths are described. Pd(0)/Cu(I)-catalysed reactions between {Co₃{μ₃-C(CC)₂Au(PPh₃)}(μ-dppm)(CO)₇ and I(CC)₂SiMe₃ or FcCCI gave {Co₃{μ₃-C(CC)_xR}(μ-dppm)(CO)₇ [x = 4, R = SiMe₃3; x = 3, R = Fc 8]; treatment of 3 with NaOMe and AuCl(PPh₃) gave 4 [x = 4, R = Au(PPh₃)]. Related preparations of Co₃{μ₃-C(CC)₂[Ru(PP)Cp′]}(μ-dppm)_n(CO)_9−2n [PP = (PPh₃)₂, Cp’ = Cp, n = 1, 5; PP = dppe, Cp′ = Cp^∗, n = 1, 6; 0, 7] are also described. Syntheses of bis-cluster complexes {Co₃(μ-dppm)(CO)₇}₂(μ-C_x) (x = 14, 12; 16, 9; 18, 11; 26, 10) - the latter being the longest cluster-capped C_x chains so far described - and the mercury-bridged compounds Hg{(CC)_xC[Co₃(μ-dppm)(CO)₇]}₂ (x = 1, 13; 2, 14) are reported. The molecular structures of 7, 12, 13 and 14, as well as of Co₃(μ₃-CCCSiMe₃)(μ-dppm)(CO)₆(PPh₃) (15) and Co₃{μ₃-CC(O)OEt}(μ-dppm)(CO)₇ (16), are reported.     

Mono and dinuclear half-sandwich platinum group metal complexes bearing pyrazolyl-pyrimidine ligands: Syntheses and structural studies

Reactions of 0.5 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = η⁶-C₆H₆, η⁶-p-ⁱPrC₆H₄Me) and [(Cp∗)M(μ-Cl)Cl]₂ (M = Rh, Ir; Cp∗ = η⁵-C₅Me₅) with 4,6-disubstituted pyrazolyl-pyrimidine ligands (L) viz. 4,6-bis(pyrazolyl)pyrimidine (L1), 4,6-bis(3-methyl-pyrazolyl)pyrimidine (L2), 4,6-bis(3,5-dimethyl-pyrazolyl)pyrimidine (L3) lead to the formation of the cationic mononuclear complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ (L = L1, 1; L2, 2; L3, 3), [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ (L = L1, 4; L2, 5; L3, 6), [(Cp∗)Rh(L)Cl]⁺ (L = L1, 7; L2, 8; L3, 9) and [(Cp∗)Ir(L)Cl]⁺ (L = L1, 10; L2, 11; L3, 12), while reactions with 1.0 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ and [(Cp∗)M(μ-Cl)Cl]₂ give rise to the dicationic dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (L = L1, 13; L2, 14; L3, 15), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (L = L1, 16; L2, 17; L3, 18), [{(Cp∗)RhCl}₂(L)]²⁺ (L = L1, 19; L2, 20; L3, 21) and [{(Cp∗)IrCl}₂(L)]²⁺ (L = L1 22; L2, 23; L3 24). The molecular structures of [3]PF₆, [6]PF₆, [7]PF₆ and [18](PF₆)₂ have been established by single crystal X-ray structure analysis.     

Synthesis of aluminium complexes bearing a piperazine-based ligand system

Aluminium complexes bearing the N,N-chelating ligand 1,4-bis(2-hydroxy-3,5-di-tert-butyl)piperazine (1) have been synthesised. Both monometallic and bimetallic aluminium methyl complexes (2 and 3, respectively) were prepared by treatment of 1 with the appropriate amount of AlMe₃. Complex 2 can be converted to 3 by addition of excess AlMe₃. Bimetallic aluminium-ethyl complex 4 was also prepared. Treatment of 1 with AlEt₂Cl afforded the monometallic chloride complex 5. Treatment of this latter complex with potassium alkoxides (KOR, R = Me, Et, ⁱPr, ^tBu) or AgOTf afforded the corresponding aluminium alkoxide complexes (6, R = Et; 7, R = Me; 8, R = ⁱPr; 9, R = ^tBu; 10, R = OTf) in good yields. Aluminium ethoxide complex 6 was also synthesised by treatment of 1 with AlEt₂OEt. All of these complexes were tested as potential catalysts in the ring-opening polymerisation of rac-lactide and caprolactone with limited success.     

Synthesis and characterization of para-nitro substituted 2,6-bis(phenylimino)pyridyl Fe(II) and Co(II) complexes and their ethylene polymerization properties

Four iron(II) and cobalt(II) complexes ligated by 2,6-bis(4-nitro-2,6-R₂-phenylimino)pyridines, LMCl₂ (1: R = Me, M = Fe; 2: R = iPr, M = Fe; 3: R = Me, M = Co; 4: R = iPr, M = Co) have been synthesized and fully characterized, and their catalytic ethylene polymerization properties have been investigated. Among these complexes, the iron(II) pre-catalyst bearing the ortho-isopropyl groups (complex 2) exhibited higher activities and produced higher molecular weight polymers than the other complexes in the presence of methylaluminoxane (MAO). A comparison of 2 with the reference non-nitro-substituted catalyst (2,6-bis(2,6-diisopropylphenylimino)pyridyl)FeCl₂ (FeCat 5) revealed a modest increase of the catalytic activity and longer lifetime upon substitution of the para-positions with nitro groups (activity up to 6.0 × 10³ kg mol⁻¹ h⁻¹ bar⁻¹ for 2 and 4.8 × 10³ kg mol⁻¹ h⁻¹ bar⁻¹ for 5), converting ethylene to highly linear polyethylenes with a unimodal molecular weight distribution around 456.4 kg mol⁻¹. However, the iron(II) pre-catalyst 1 on changing from ortho-isopropyl to methyl groups displayed much lower activities (over an order of magnitude) than 2 under mild conditions. As expected, the cobalt analogues showed relatively low polymerization activities.     

New group 14 element(IV) β-diiminates and a Sn(II) analogue

Seven group 14 element(IV) compounds 2-7 have been prepared, derived either (2-5) from the potassium β-diketiminate K(L) [L = {N(Ar)C(Me)}₂CH, Ar = C₆H₃Prⁱ₂-2,6] (1) or the known lithium β-dialdiminate Li(L′)] [L′ = {N(Ar)C(H)}₂CPh, Ar = C₆H₃Prⁱ₂-2,6]. Treatment of 1 with Bu^tC(O)Cl, Me₃SiCl, Ph₃SnCl, or Me₃SnCl afforded {N(Ar)C(Me)}₂C(H)C(O)Bu^t (2), [ArNC(Me)C(H)C(Me)N(Ar)SiMe₃] (3), [HN(Ar)C(Me)C(H)C(CH₂SnPh₃)N(Ar)] (4), or (5), respectively. Compounds 4 and 5 are remarkable as they have arisen from a tautomer of 1; crystalline centrosymmetric 5 has a fused tricyclic structure, a central eight-membered ring flanked by two six-membered rings. The compounds [GeCl₂(L′)(OGeCl₃)] (6) or [SnCl(L′)Me₂] (7), the first group 14 metal β-dialdiminates, were obtained from Li(L′) and (GeCl₃)₂O or Me₂SnCl₂, respectively. The Sn(II) compound SnCl(L′) (8) was prepared from SnCl₂ and K(L′). The molecular structures of the crystalline compounds 3-8 are reported.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Synthesis of the first examples of stable heterometallic isopropoxides of an organometallic RSn(IV) moiety

Five-, six-, and seven-coordinate volatile butyltin(IV) heterobimetallic derivatives, respectively of the types, [BuSn{(μ-OPrⁱ)₂Al(OPrⁱ)₂}Cl₂] (1), [BuSn{(μ-OPrⁱ)₂Al(OPrⁱ)₂}₂Cl] (2), and BuSn{(μ-OPrⁱ)₂M(OPrⁱ)_x − 2}₃ (3:M = Al (x = 4); 4:M = Ga (x = 4); 5:M = Nb (x = 6)) have been synthesized by the reactions of BuSnCl₃ with potassium tetraisopropoxoaluminate in 1:1, 1:2, and 1:3 molar ratios. Replacement reactions of chloride in (1) and (2) with appropriate alkoxometallate (tetraisopropoxoaluminate, tetraisopropoxogallate, or hexaisopropoxoniobate) ligands result in the formation of novel BuSn(IV) heterotri- and tetra-metallic derivatives. All of these derivatives have been characterized by elemental analyses, molecular weight measurements, and spectroscopic (IR, ¹H, ²⁷Al, and ¹¹⁹Sn NMR) studies. Based on these studies, plausible structures for the new derivatives involving bidentate ligation of the alkoxometallate ligands have been suggested.