Titrimetric determination of silver,chloride and bromide in glasses

Titrimetric methods are described for the determination of total silver, free silver or free halide (Cl, Br and I), and bromide (or iodide) in glasses. Total silver is titrated potentiometrically with standard bromide solution after hydrofluoric—sulfuric acid sample decomposition followed by sodium hydrogensulfate fusion for volatilizing hydrogen halide. Free silver is determined similarly on a separate sample without the fusion step. For glasses containing excess of halide, free halide is titrated potentiometrically with standard silver(I) solution after dissolution of the sample in ice-cold hydrofluoric—nitric acid. Total bromide (or iodide) is determined by iodometric titration after oxidation to bromate (or iodate) with hypochlorite solution. The methods have been applied to a wide range of complex glass compositions and results are compared with values obtained by controlled-potential coulometry and x-ray fluorescence analysis.     

Statistical model for assessing the quality and cost of inspection procedures in forensic and environmental analysis.

Legal regulations on the composition and safety of food products require inspection programmes to maintain the standards required or to obtain an insight in the real situation. Such programmes consist of a sampling procedure followed by analysis of the samples. When monitoring environmental contamination similar programmes are required. When large numbers of samples have to be analysed in order to monitor contaminants in either environmental or food-chain samples, and the majority fulfil the legal requirements, a two-stage control system is desirable. Firstly, samples are analysed by a simple 'screening method', to sift out the large number of samples that fulfil the requirements (negative results). The minority not fulfilling the requirements (positive results) are investigated further by a more sophisticated confirmatory method, specific for the analyte(s) of interest, for an ultimate judgement. For this type of inspection a simple model is used in this study, in order to calculate the fraction of false negative results in the final decision. It is assumed, that, when the quality criteria for the confirmatory method are appropriate, the fraction of false positive results is negligibly small. The quality of the inspection is expressed in terms of the fraction f of false negative results with respect to the real positive samples and is related to labour and costs. In an example given, the costs of analysing 40,000 samples with f = 6.6% are ecu 7,800,000. Improving f down to 3.2% creates additional costs of ecu 16,000,000. The proposed model might not be sufficiently realistic, but more realistic models can be implemented.(ABSTRACT TRUNCATED AT 250 WORDS)     

Codes in platonic, Archimedean, Catalan, and related polyhedra: a model for maximum addition patterns in chemical cages

The notion of d-code is extended to general polyhedra by defining maximum sets of vertices with pairwise separation > or =d. Codes are enumerated and classified by symmetry for all regular and semiregular polyhedra and their duals. Partial results are also given for the series of medials of Archimedean polyhedra. In chemistry, d-codes give a model for maximal addition to or substitution in polyhedral frameworks by bulky groups. Some illustrative applications from the chemistry of fullerenes and boranes are described.     

Determination of uranium and impurities in Portuguese yellow-cakes

A method is described for separation of impurities in uranium yellow cakes from Urgeiriça (Portugal). The trace metals are separated and concentrated by solvent extraction from 6M nitric acid into 100% TBP. The raffinate is then analysed directly by flame spectrometry. Uranium is determined gravimetrically after stripping of the organic phase. The method is fast and economic, and the results are in good agreement with those obtained by specific methods for each element after prior separation of uranium by precipitation or solvent extraction with various solvents.     

Integrity of liposomes in presence of various formulation excipients, when dispersed in aqueous media and in hydrogels

The integrity of liposomes when dispersed in presence of various common formulation excipients is studied. Additionally, the effect of the excipients on the release of calcein from the same liposomes when dispersed in hydrogels is investigated and the results of the two sets of experiments are compared. Propyleneglycol (PG), transcutol CG (TR), cremophor EL (CR) and labrafac hydro WL 1219 (LB) are used at 10 or 25% (v/v) and the retention of liposome encapsulated calcein is followed for 24 or 48 h periods. Calcein entrapping multilamellar liposomes composed of phosphatidylcholine (PC) or 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) with or without addition of different amounts of cholesterol (Chol) were prepared by the thin film hydration method.

Experimental results reveal that liposomes are affected more by the excipients in the order: LB > CR > PG  TR. Particularly LB and in some cases also CR result in rapid release of most or the entire vesicle encapsulated dye. Addition of Chol in both PC and DSPC liposomes results in substantial increase of vesicle integrity in all cases. Concerning the release of calcein form the liposomal gels, from DSPC/Chol (1:1) liposomal gels calcein release was not affected by addition of 25% of TR or PG in all gels studied, but LB caused a significant increase in calcein release. However, from PC-liposomal gels even TR and PG (at 25%), increases calcein release.

Conclusively, the results of this study suggest that liposomes are protected from excipients when dispersed in gels compared to aqueous media. This should be taken into account when liposomal drug formulations are designed.     

The use of ultrafiltration for the separation and fractionation of organic ligands in fresh waters

The effects of various experimental conditions on the results obtained by using membrane filtration for the separation and fractionation of organic matter in fresh waters (mainly fulvic and humic substances) are described. The technique used (washing or concentration) and the initial concentration of the organic matter to be filtered are the most critical factors. The technique is used for the fractionation of eight water samples, one sample of peat interstitial water, five water extracts of soil and four water samples obtained by decomposition of leaves. The results are compared. A comparison is also made with results cited in the literature.     

Thick film biosensors for metabolites in undiluted whole blood and plasma samples

The new electrochemical thick film biosensors from Roche Diagnostics are presented. Following considerations about the principal requirements that biosensors have to fulfil to be useful for diagnostic purposes, the basic design of these thick film biosensors is shown. In this paper, the new generation of biosensors for glucose, lactate and urea are presented, as well as data from a new biosensor for creatinine. All biosensors are designed for multiple use, at minimum 500 samples or 1 week in-use (depending on type of enzyme used), for determinations in undiluted whole blood or plasma, with extra electrodes to compensate for interferences. The sensors are integrated in a disposable cassette requiring 38 microtl sample volume. The analytical ranges of the sensors scope well with the normal and pathological concentrations of metabolites in human blood, e.g. for glucose 0.5-40.0 mmol/L. Both biosensors and interference-compensating electrodes are developed to have a cycle time of 90 s maximum. Method comparison diagrams show excellent correlation of results obtained by biosensors compared to results achieved by reference methods. In addition, the possibility of urea and creatinine determinations in diluted urine is presented.     

Uranyl ion complexation by citric and citramalic acids in the presence of diamines

Uranyl nitrate reacts with citric (H4cit) or d-(-)-citramalic (H3citml) acids under mild hydrothermal conditions and in the presence of diamines to give different complexes which are all characterized by the presence of 2:2 uranyl/polycarboxylate dianionic dimers or of polymeric chains based on the same dimeric motif. Each uranium ion is chelated by the two ligands through the alkoxide and the alpha- or beta-carboxylate groups, the second beta-carboxylic group in citrate being uncoordinated. The uranium coordination sphere is completed by either a water molecule or the beta-carboxylate group of a neighboring unit, thus giving zero- or one-dimensional assemblages, respectively. The evidence for [UO2(Hcit)]2 dimers in the solid state confirms previous results from potentiometric and EXAFS measurements on solutions. Depending on the diamine used (DABCO, 2,2'- and 4,4'-bipyridine, [2.2.2]cryptand) and its ability to form divergent hydrogen bonds or not, different uranyl/polycarboxylate topologies are obtained, thus evidencing template effects, and extended hydrogen bonding gives two- or three-dimensional assemblages. These results, together with those previously obtained with NaOH as a base, add to the knowledge of the uranyl/citrate system, which is much investigated for its environmental relevance.     

Ordering and Clathrate Hydrate Formation in Co‐deposits of Xenon and Water at Low Temperatures

Local ordering in co‐deposits of water and xenon atoms produced at low temperatures can be followed uniquely by ¹²⁹Xe NMR spectroscopy. In water‐rich samples deposited at 10 K and observed at 77 K, xenon NMR results show that there is a wide distribution of arrangements of water molecules around xenon atoms. This starts to order into the definite coordination for the structure I, large and small cages, when samples are annealed at ～140 K, although the process is not complete until a temperature of 180 K is reached, as shown by powder Xray diffraction. There is evidence that Xe ? 20 H₂O clusters are prominent in the early stages of crystallization. In xenon‐rich deposits at 77 K there is evidence of xenon atoms trapped in Xe ? 20 H₂O clusters, which are similar to the small hydration shells or cages observed in hydrate structures, but not in the larger water clusters consisting of 24 or 28 water molecules. These observations are in agreement with results obtained on the formation of Xe hydrate on the surface of ice surfaces by using hyperpolarized Xe NMR spectroscopy. The results indicate that for the various different modes of hydrate formation, both from Xe reacting with amorphous water and with crystalline ice surfaces, versions of the small cage are important structures in the early stages of crystallization.     

Determination of trace metals in sea water by chelex-100 or solvent extraction techniques and atomic absorption spectrometry

Determinations of cadmium, lead, nickel, copper and zinc in sea water are discussed. Two different methods of preconcentration are compared: the trace metals are preconcentrated either by extraction with ammonium pyrrolidinedithiocarbamate/diethylammonium diethyldithiocarbamate into freon followed by back-extraction into nitric acid, or by collection on a Chelex-100 resin followed by elution with nitric acid. Cd, Pb, Ni, and Cu are determined by graphite-furnace atomic absorption spectrometry, while zinc is determined by flame atomic absorption spectrometry. The comparison of methods shows that cadmium can be determined accurately whereas results for the other trace metals may be biased by reagent contamination in the Chelex-100 method. Recovery data are given for both methods of preconcentration. Filtering experiments with Chelex-100 method are described. Results are compared for sea-water samples preconcentrated immediately after sampling and some weeks after sampling, with only freezing for preservation. The present results are consistent with other recent work. The importance of blank values is discussed.     

Stress-strain behaviour and volume swelling of wool fibres rendered elastomeric in LiBr solution

Summary Stress-strain behaviour and volume swelling of wool samples were studied, with the wool fibres in the elastomeric state produced by their absorption of 8 M LiBr solution. Tests were done with normal wool and wool samples in which the number of disulphide bonds had been decreased by reduction in thioglycollic acid or benzyl mercaptan. Experiments included fibres from all samples at the end of both first and second stages of supercontraction and also after a setting treatment. With the aid of the theoretical relationship between stress and strain the data were used to calculate relative levels of cross-linking. Results from fibres at the end of the second stage of supercontraction indicate that there are five times as many cross-links in unreduced fibres as in zero-disulphide fibres. Results for fibres at the end of the first stage of supercontraction are different; they indicate six times as many cross-links in unreduced fibres as in unreduced second-stage fibres, and fifteen times as many in unreduced fibres as in zero-disulphide fibres. It is shown that the above estimates disagree with estimates made using either length change or volume swelling data. Reasons for preferring estimates from the stress-strain equation are given. It is concluded that fibres at the end of the second stage of supercontraction (or set fibres) yield stress-strain results chiefly dependent on the number of covalent cross-links in wool, while the results from first-stage fibres are complicated by the presence of physical constraints. Application of solution theory to the volume swelling results indicates a potential level of supercontraction of 70% for wool on the point of going into solution. This high level of contraction is not observed in unbuffered LiBr solution, but has been reported for wool fibres in acid solutions of salts.     

Water- and acid-mediated excited-state intramolecular proton transfer and decarboxylation reactions of ketoprofen in water-rich and acidic aqueous solutions

We present an investigation of the decarboxylation reaction of ketoprofen (KP) induced by triplet excited-state intramolecular proton transfer in water-rich and acidic solutions. Nanosecond time-resolved resonance Raman spectroscopy results show that the decarboxylation reaction is facile in aqueous solutions with high water ratios (water/acetonitrile ≥50%) or acidic solutions with moderate and strong acid concentration. These experimental results are consistent with results from density functional theory calculations in which 1) the activation energy barriers for the triplet-state intramolecular proton transfer and associated decarboxylation process become lower when more water molecules (from one up to four molecules) are involved in the reaction system and 2) perchloric acid, sulfuric acid, and hydrochloric acid can shuttle a proton from the carboxyl to carbonyl group through an initial intramolecular proton transfer of the triplet excited state, which facilitates the cleavage of the C-C bond, thus leading to the decarboxylation reaction of triplet state KP. During the decarboxylation process, the water molecules and acid molecules may act as bridges to mediate intramolecular proton transfer for the triplet state KP when KP is irradiated by ultraviolet light in water-rich or acidic aqueous solutions and subsequently it generates a triplet-protonated carbanion biradical species. The faster generation of triplet-protonated carbanion biradical in acidic solutions than in water-rich solutions with a high water ratio is also supported by the lower activation energy barrier calculated for the acid-mediated reactions versus those of water-molecule-assisted reactions.     

Polarization and polarizability in extended one-dimensional organic materials

The modern theory of polarization in extended insulators is applied to one-dimensional models for conjugated polymers and charge transfer salts. Closed expressions for the dependence of the polarization on the site and bond energy alternations are presented for uncorrelated models, and results from exact real-space diagonalization are obtained for correlated models. Changes in polarization induced by lattice phonons or molecular vibrations are directly related to the intensity of infrared bands in the far and mid-IR, respectively. We model intensities by introducing linear electron-vibration coupling and show that coupling to delocalized electrons generates a combination band consisting of a lattice phonon and a molecular vibration. The displaced dipole operator is defined on a real-space basis allowing for the finite field calculation of linear polarizability in finite size systems with periodic boundary conditions. Size-consistency arguments are used to demonstrate that the resulting polarizability becomes exact in the thermodynamic limit, and numerical calculations demonstrate that this approach leads to reliable results that converge rapidly to the thermodynamic limit.     

Differential ionisation of natural antioxidant polyenes in electrospray and nanospray mass spectrometry

Carotenoids are natural products with high economic relevance for the pharmaceutical industries and are a common subject for biochemical research. Reported here is a comparative study of the ionisation of carotenoids by electrospray mass spectrometry (ESI-MS) and nanospray mass spectrometry (nanoESI-MS). The results demonstrate that, along with solvent choice, the influence of the different ionisation processes of ESI and nanoESI are fundamental in determining how ionisation is achieved and which ions (molecular ion or protonated molecule) are observed in MS. The increased understanding afforded by this study will help in the development of unequivocal microanalytical methods for carotenoids and related antioxidant polyenes.     

Starting electroosmotic flow in an annulus and in a rectangular channel

The initial electroosmotic flow through a small pore or microchannel with annular or rectangular cross section is studied under the Debye-Hückel approximation. Analytical series solutions and their asymptotic behavior for small and large non-dimensional electrokinetic widths are found for these two basic cases. The explicit and accurate solutions are particularly useful for examining various geometric/physical effects on the transient time scales and the flow rates for the transient states. The steady flow rate of the smaller channel may be disproportionately smaller than a reference channel if the electric double layer is thick, but will be in close proportion to the area ratio if the electric double layer is thin. A smaller channel compared to a reference channel has a shorter transient time scale, and the transient flow has characters very different from the steady state if the electric double layer is thin. The total transient flow rate of several smaller pores or channels may exceed largely that of a single large pore or channel with the same total cross section on the transient time scale of the smaller channels. The results have important implications on liquid transport in micropores or channels by pulse voltages or more general time-varying voltages.     

Diffusioosmosis and electroosmosis of electrolyte solutions in fibrous porous media

The steady diffusioosmotic and electroosmotic flows of an electrolyte solution in the fibrous porous medium constructed by a homogeneous array of parallel charged circular cylinders are analyzed under conditions of small Peclet and Reynolds numbers. The imposed electrolyte concentration gradient or electric field is constant and can be oriented arbitrarily with respect to the axes of the cylinders. The thickness of the electric double layers surrounding the cylinders is assumed to be small relative to the radius of the cylinders and to the gap width between two neighboring cylinders, but the polarization effect of the diffuse ions in the double layers is incorporated. Through the use of a unit cell model, the appropriate equations of conservation of the electrochemical potential energies of ionic species and the fluid momentum are solved for each cell, in which a cylinder is envisaged to be surrounded by a coaxial shell of the fluid. Analytical expressions for the diffusioosmotic and electroosmotic velocities of the bulk electrolyte solution as functions of the porosity of the ordered array of cylinders are obtained in closed form for various cases. Comparisons of the results of the cell model with different conditions at the outer boundary of the cell are made. In the limit of maximum porosity, these results can be interpreted as the diffusiophoretic and electrophoretic velocities of an isolated circular cylinder caused by the imposed electrolyte concentration gradient or electric field.     

Fast voltammetric studies of the kinetics and energetics of coupled electron-transfer reactions in proteins

A wealth of information on the reactions of redox-active sites in proteins can be obtained by voltammetric studies in which the protein sample is arranged as a layer on an electrode surface. By carrying out cyclic voltammetry over a wide range of scan rates and exploiting the ability to poise or pulse the electrode potential between cycles, data are obtained that are conveniently (albeit simplistically) analysed in terms of plots of peak potentials against scan rate. A simple reversible electron-transfer process gives rise to a 'trumpet'-shaped plot because the oxidation and reduction peaks separate increasingly at high scan rate; the electrochemical kinetics are then determined by fitting to Butler-Volmer or Marcus models. Much more interesting though are the ways in which this 'trumpet plot' is altered, often dramatically, when electron transfer is coupled to biologically important processes such as proton transfer, ligand exchange, or a change in conformation. It is then possible to derive particularly detailed information on the kinetics, energetics and mechanism of reactions that may not revealed clearly or even at all by other methods. In order to interpret the voltammetry of coupled systems, it is important to be able to define 'ideal behaviour' for systems that are expected to show simple and uncoupled electron transfer. Accordingly, this paper describes results we have obtained for several proteins that are expected to show such behaviour, and compares these results with theoretical predictions.     

Ties in proximity and clustering compounds

Hierarchical clustering algorithms such as Wards or complete-link are commonly used in compound selection and diversity analysis. Many such applications utilize binary representations of chemical structures, such as MACCS keys or Daylight fingerprints, and dissimilarity measures, such as the Euclidean or the Soergel measure. However, hierarchical clustering algorithms can generate ambiguous results owing to what is known in the cluster analysis literature as the ties in proximity problem, i.e., compounds or clusters of compounds that are equidistant from a compound or cluster in a given collection. Ambiguous ties can occur when clustering only a few hundred compounds, and the larger the number of compounds to be clustered, the greater the chance for significant ambiguity. Namely, as the number of "ties in proximity" increases relative to the total number of proximities, the possibility of ambiguity also increases. To ensure that there are no ambiguous ties, we show by a probabilistic argument that the number of compounds needs to be less than 2(n 1/4), where n is the total number of proximities, and the measure used to generate the proximities creates a uniform distribution without statistically preferred values. The common measures do not produce uniformly distributed proximities, but rather statistically preferred values that tend to increase the number of ties in proximity. Hence, the number of possible proximities and the distribution of statistically preferred values of a similarity measure, given a bit vector representation of a specific length, are directly related to the number of ties in proximities for a given data set. We explore the ties in proximity problem, using a number of chemical collections with varying degrees of diversity, given several common similarity measures and clustering algorithms. Our results are consistent with our probabilistic argument and show that this problem is significant for relatively small compound sets.     

Effective monitoring of residues of nortestosterone and its major metabolite in bovine urine and bile

The results of a newly developed method for the detection and identification of residues of nortestosterone (NT) and one of its major metabolites, 17 alpha-nortestosterone (epiNT) are described. The method is based on sample clean-up by immunoaffinity chromatography and detection by high-performance liquid chromatography and/or gas chromatography-mass spectrometry (selected-ion monitoring). All samples of bile from calves that had been treated with NT contained significant amounts of epiNT (6-18 micrograms/l). The NT content of these samples, if detectable, was below 1 microgram/l. Urine contained, with one exception, less than 1 microgram/l epiNT. NT itself if detectable, was, present in urine or bile at levels below 0.1 microgram/l. The results corresponds well with results obtained with a radioimmunoassay procedure.     

The characterization and behaviour of n-and p-CdTe electrodes in acetonitrile solutions

The electrochemical and photoelectrochemical behaviours of nCdTe and pCdTe singlecrystal semiconductors are investigated in acetonitrile solutions containing tetrabutylammonium tetrafluoroborate and various electroactive compounds, i.e. anthracene, phthalonitrile, nitromesitylene, 9-fluorenone, nitrobenzene, metatertiobutylnitrobenzene, benzoquinone and ferricenium tetrafluoroborate. The cyclic voltammograms at the semiconductor electrodes in the dark and illuminated with red light are compared to the Nernstian behaviour at a platinum disk electrode. The flat-band potential is estimated by using the photocurrent onset potential under continuous irradiation and Schottky-Mott plots. Consistent results have been obtained by these two methods. The usual band model is shown to predict roughly the observed behaviour of n- and pCdTe except for the cases where the presence of invisible films or surface states after polishing, and/or etching and/or the first reduction or oxidation voltammetric scan modifies the expected results. These surface modifications are capable of mediating electron transfer and explain the extension of photo effects far negative of the conduction band edge, using a 1.40-eV photon.