Indole 3-alkylation/vinylation under catalysis of the guanidinium ionic liquids

Two ionic liquids, N,N,N,N-tetramethylguanidinium trifluoroacetate (TMGT) and the unprecedented N,N,N,N-tetramethylguanidinium triflate (TMGT_f), were used as catalyst solvents in condensations between indoles and arylaldehydes or 1,3-diketones providing a simple and efficient method for synthesis of bis(3-indolyl)methanes or casually 3-alkenylindoles due to stereoelectronic concerns of reactants. The ionic liquids are easily separated and reused for several times.     

Ionic Liquid-Based Ultrasound-Assisted Extraction of Chlorogenic Acid from Lonicera japonica Thunb

Hydrophilic ionic liquid of [BMIM][BF₄] was successfully applied for the ultrasound-assisted extraction (UAE) of hydrophilic chlorogenic acid from Lonicera japonica Thunb. To explore this extraction procedure, the corresponding extraction parameters including the sample size, [BMIM][BF₄] concentration, pH, extraction temperature, ultrasonic power and extraction time were investigated. The results revealed that the [BMIM][BF₄]-based UAE efficiency of chlorogenic acid was higher than that of the ethanol-based UAE and the traditional refluent ethanol extraction. And the study on the method reliability further confirmed that the [BMIM][BF₄]-based UAE is suitable for the effective extraction of chlorogenic acid from honeysuckle.     

Rapid and Efficient Synthesis of 3,3-Di(1H-indol-3-yl)indolin-2-ones and 2,2-Di(1H-indol-3-yl)-2H-acenaphthen-1-ones Catalyzed by p-TSA

An efficient synthesis of 3,3-di(1H-indol-3-yl)indolin-2-ones and 2,2-di(1H-indol-3-yl)-2H-acenaphthen-1-ones via a reaction of various isatins or acenaphthenequinone with indoles in the presence of p-methylbenzene sulfonic acid (p-TSA) in CH₂Cl₂ at room temperature is described. The advantages of this method include good reaction yield, simple workup procedure, and mild reaction condition.     

Liquid structures of 1-butyl-3-methylimidazolium tetrafluoroborate and carbon dioxide mixtures by X-ray diffraction measurements

X-ray diffraction measurements for the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM][BF₄], mixed with CO₂ were carried out at high pressures using our developed polymer cell. The intermolecular distribution functions obtained for [BMIM][BF₄]–CO₂ mixtures showed that CO₂ molecules are preferentially solvated to the [BF₄]⁻ anion. The similar preferential solvation was previously observed in analogous 1-btuyl-3-methylimidazolium hexafluorophosphate, [BMIM][PF₆], with a different anion, which is in harmony with the present results in [BMIM][BF₄]–CO₂.     

Chelation-controlled asymmetric aminohalogenation reaction

The chelation-controlled asymmetric aminohalogenation of α,β-unsaturated 3-aryl-N-acyl-N-4-phenyl-2-oxazolidinones have been established by using palladium(II) acetate as the catalyst and as the chelation metal. The reaction is very convenient to perform by simply mixing the three reactants, cinnamates, N,N-dichloro-p-toluenesulfonamide and catalyst together with 4 Å molecular sieves at rt in any convenient vial of appropriate size without special protection from inert gases. Unlike the previous asymmetric aminohalogenation, the ionic liquid, [BMIM][NTf₂], was found to be superior to [BMIM][BF₄] as the reaction media. It was also found that palladium(II) acetate has to be used together with 1 equiv of MeCN to achieve the opposite chelation control. The resulting absolute stereochemistry of the product was unambiguously determined by X-ray structural analysis.     

Measurement and correlation of vapor pressure of benzene and thiophene with [BMIM][PF6] and [BMIM][BF4] ionic liquids

An apparatus used to measure vapor pressure of organic solvents was set up, and vapor pressure of mixture of ionic liquids ([BMIM][PF₆] and [BMIM][BF₄]) and aromatic compounds (benzene and thiophene), with mole fraction of organic solute from 0.1 to 0.75 was measured by using saturation vapor pressure method at temperature from 303 K to 343 K. Then NRTL equation was used to correlate the experimental data. The overall average relative deviation of activity coefficients for the whole system is 2.30%, which indicates that NTRL equation can be utilized to correlate vapor pressure of binary systems containing ionic liquids. The results show that ionic liquids can depress the volatility of aromatic compounds.     

Relative hydrophobicity of equilibrium phases in biphasic systems (ionic liquid + water)

Partition coefficients for a series of dinitrophenylated (DNP) amino acids in biphasic systems composed of hydrophobic ionic liquids and water were experimentally determined. The ionic liquids used were three 1-alkyl-3-methylimidazolium tetrafluoroborates, [C_nmim][BF₄], with alkyl chain substituents hexyl, octyl, and decyl. The liquid–liquid phase diagram for the system ([C₁₀mim][BF₄] + water) was experimentally determined. DNP amino acids distribute preferentially to the IL-rich phase and ([C₁₀mim][BF₄] + water) was found to be the system with the lowest partition coefficients for the solutes studied. The experimental partition coefficients decrease as the size of the alkyl side chain in the ionic liquids increases. The free energy of transfer of a methylene group between phases was calculated through the partition coefficients, which provides a measure of the relative hydrophobicity of the equilibrium phases. It was found that the system ([C₁₀mim][BF₄] + water) presents a lower free energy (and thus a lower relative hydrophobicity) than the system ([C₈mim][BF₄] + water). In order to better understand this result, the micellar behavior of the three ionic liquids was studied. Electrical conductivities of several aqueous solutions of the ionic liquids were measured to determine the critical micelle concentration (CMC) and the degree of micelle ionization, α, of the three ionic liquids. From these two properties it was possible to obtain the free energy of micellization, ΔG_mic, for the ionic liquids.     

Effect of ionic liquid organizing ability and amine structure on the rate and mechanism of base induced elimination of 1,1,1-tribromo-2,2-bis(phenyl-substituted)ethanes

The kinetics of the elimination reaction of 1,1,1-tribromo-2,2-bis(phenyl-substituted)ethanes into the corresponding 1,1-dibromo-2,2-bis(phenyl-substituted)ethenes induced by amines were studied in three room temperature ionic liquids ([BMIM][BF₄], [BMIM][PF₆], [BdMIM][BF₄]). In order to have information about reagent-ionic liquid interactions, the reaction was carried out over the temperature range (293.1-313.1 K). To study the effect of the amine on the rate and occurrence of the elimination reaction, several primary, secondary and tertiary amines with different structure (cyclic and acyclic), basicity and steric requirements were used. The data collected show that the reaction occurs faster in ionic liquids than in other conventional solvents. Furthermore, ionic liquids seem to be able to induce, for the studied reaction, a shift of mechanism from E1_cb (in MeOH) versus E2 (in ionic liquid).     

MIL‐53(Al) as a Versatile Platform for Ionic‐Liquid/MOF Composites to Enhance CO2 Selectivity over CH4 and N2

Five different imidazolium‐based ionic liquids (ILs) were incorporated into a metal–organic framework (MOF), MIL‐53(Al), to investigate the effect of IL incorporation on the CO₂ separation performance of MIL‐53(Al). CO₂, CH₄, and N₂ adsorption isotherms of the IL/MIL‐53(Al) composites and pristine MIL‐53(Al) were measured to evaluate the effect of the ILs on the CO₂/CH₄ and CO₂/N₂ selectivities of the MOF. Of the composite materials that were tested, [BMIM][PF₆]/MIL‐53(Al) exhibited the largest increase in CO₂/CH₄ selectivity, 2.8‐times higher than that of pristine MIL‐53(Al), whilst [BMIM][MeSO₄]/MIL‐53(Al) exhibited the largest increase in CO₂/N₂ selectivity, 3.3‐times higher than that of pristine MIL‐53(Al). A comparison of the CO₂ separation potentials of the IL/MOF composites showed that the [BMIM][BF₄]‐ and [BMIM][PF₆]‐incorporated MIL‐53(Al) composites both showed enhanced CO₂/N₂ and CO₂/CH₄ selectivities at pressures of 1–5 bar compared to composites of CuBTC and ZIF‐8 with the same ILs. These results demonstrate that MIL‐53(Al) is a versatile platform for IL/MOF composites and could help to guide the rational design of new composites for target gas‐separation applications.     

离子液体型表面活性剂研究

以1-甲基咪唑为原料, 制备了6个常规离子液体: 1-正丁基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[bmim][BF₄]及[bmim][PF₆])、1-正己基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[hmim][BF₄]及[hmim][PF₆])、1-正十六烷基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[C₁₆mim][BF₄]及[C₁₆mim][PF₆])和4个功能化离子液体: 1-(2-羟乙基)-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[2-hemim][BF₄]及[2-hemim][PF₆])、1-乙氧羰基甲基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[eocmmim][BF₄]及[eocmmim][PF₆]). 研究了这两类离子液体的一些物理性能, 旨在挖掘离子液体在香料香精化妆品工业中的应用价值. 分别检测了它们与一般溶剂的互溶性, 并测定了它们的表面张力和发泡性能, 实验结果表明, 仅[C₁₆mim][BF₄]和[C₁₆mim][PF₆]具有发泡性能, 发泡力分别为68和120 mm.     

The thermochemistry of solvation of imidazolium-based ionic liquids in benzene

ABSTRACT

The present work is devoted to the thermochemical study of solvation of ionic liquids (IL) in benzene. The solution enthalpies of 1-ethyl-3-methylimidazolium tricyanomethanide [EMIM][C(CN)₃], 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-hexyl-3-methylimidazolium hexafluorophosphate [HMIM][PF₆], 1-octyl-3-methylimidazolium tetrafluoroborate [OMIM][BF₄], 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf₂] and 1-butyl-3-methylimidazolium trifluoromethanesulfonate [BMIM][TfO] in benzene were measured. The solvation enthalpies of imidazolium-based IL were calculated. Molar refractions of imidazolium-based IL form literature data on density and refractive indexes of IL were also calculated. The linear correlation between solvation enthalpy and molar refraction of IL was observed. This correlation can be used to calculate the vaporization enthalpy of imidazolium-based IL from solution calorimetry data.     

Direct Electrochemistry and Electrocatalysis Behaviors of Glucose Oxidase Based on Hyaluronic Acid-Carbon Nanotubes-Ionic Liquid Composite Film

Multi‐walled carbon nanotubes (MWNTs) were dispersed in the ionic liquid [BMIM][BF₄] to form a uniform black suspension. Based on it, a novel glucose oxidase (GOx)‐hyaluronic (HA)‐[BMIM][BF₄]‐MWNTs/GCE modified electrode was fabricated. UV‐vis spectroscopy confirmed that GOx immobilized in the composite film retained its native structure. The experimental results of EIS indicated MWNTs, [BMIM][BF₄] and HA were successfully immobilized on the surface of GCE and [BMIM][BF₄]‐MWNTs could obviously improve the diffusion of ferricyanide toward the electrode surface. The experimental results of CV showed that a pair of well‐defined and quasi‐reversible peaks of GOx at the modified electrode was exhibited, and the redox reaction of GOx at the modified electrode was surface‐confined and quasi‐reversible electrochemical process. The average surface coverage of GOx and the apparent Michaelis‐Menten constant were 8.5×10⁻⁹ mol/cm² and 9.8 mmol/L, respectively. The cathodic peak current of GOx and the glucose concentration showed linear relationship in the range from 0.1 to 2.0 mmol/L with a detection limit of 0.03 mmol/L (S/N=3). As a result, the method presented here could be easily extended to immobilize and obtain the direct electrochemistry of other redox enzymes or proteins.     

Effects of temperature and anion species on CO2 permeability and CO2/N2 separation coefficient through ionic liquid membranes

The permeability of carbon dioxide (CO₂) through imidazolium-based ionic liquid membranes was measured by a sweep gas method. Six species of ionic liquids were studied in this work as follows: [emim][BF₄], [bmim][BF₄], [bmim][PF₆], [bmim][Tf₂N], [bmim][OTf], and [bmim][dca]. The ionic liquids were supported with a polyvinylidene fluoride porous membrane. The measurements were performed at T = (303.15 to 343.15) K. The partial pressure difference between feed and permeate sides was 0.121 MPa. The permeability of the CO₂ increases with temperature for the all ionic liquid species. Base on solution diffusion theory, it can be explained that the diffusion coefficient of CO₂ in an ionic liquid affects the temperature dependence more strongly than the solubility coefficient. The greatest permeability was obtained with the [bmim][Tf₂N] membrane. The membrane of [bmim][PF₆] presents the lowest permeability.The separation coefficient between CO₂ and N₂ through the ionic liquid membranes was also investigated at the volume fraction of CO₂ at feed side 0.10. The separation coefficient decreases with the increase of temperature for the all ionic liquid species. The membrane of [emim][BF₄] and [bmim][BF₄] gives the highest separation coefficient at constant temperature. The lowest separation coefficient was obtained from [bmim][Tf₂N] membrane which presents the highest permeability of CO₂.     

Esterification of (RS)-Ibuprofen by native and commercial lipases in a two-phase system containing ionic liquids

Four commercially available lipases and two native lipases from Aspergillus niger AC-54 and Aspergillus terreus AC-430 were used for the resolution of (RS)-Ibuprofen in systems containing the ionic liquids [BMIM][PF₆] and [BMIM][BF₄]. The lipases showed higher conversion in a two-phase system using [BMIM][PF₆] and isooctane compared to that in pure isooctane. Although the best enzyme was a commercially available lipase from Candida rugosa (E = 8.5), another native lipase, produced in our laboratory, from A. niger gave better enantioselectivity (E = 4.6) than the other lipases tested (E = 1.9–3.3.). After thorough optimization of several reaction conditions (type and ratios of isooctane/ionic liquid, amount of enzyme, and reaction time), the E-value of A. niger lipase (15% w/v) could be duplicated (E = 9.2) in a solvent system composed of [BMIM][PF₆] and isooctane (1:1) after 96 h of reaction.     

Tunning CO2 Separation Performance of Ionic Liquids through Asymmetric Anions

This work aims to explore the gas permeation performance of two newly-designed ionic liquids, [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂], in supported ionic liquid membranes (SILM) configuration, as another effort to provide an overall insight on the gas permeation performance of functionalized-ionic liquids with the [C₂mim]⁺ cation. [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂] single gas separation performance towards CO₂, N₂, and CH₄ at T = 293 K and T = 308 K were measured using the time-lag method. Assessing the CO₂ permeation results, [C₂mim][CF₃BF₃] showed an undermined value of 710 Barrer at 293.15 K and 1 bar of feed pressure when compared to [C₂mim][BF₄], whereas for the [C₂mim][CF₃SO₂C(CN)₂] IL an unexpected CO₂ permeability of 1095 Barrer was attained at the same experimental conditions, overcoming the results for the remaining ILs used for comparison. The prepared membranes exhibited diverse permselectivities, varying from 16.9 to 22.2 for CO₂/CH₄ and 37.0 to 44.4 for CO₂/N₂ gas pairs. The thermophysical properties of the [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂] ILs were also determined in the range of T = 293.15 K up to T = 353.15 K at atmospheric pressure and compared with those for other ILs with the same cation and anion’s with similar chemical moieties.     

Room-Temperature Synthesis of the Bi5[GaCl4]3 Salt From Three Different Classes of Ionic Liquids

Following the development in the synthesis of subvalent cluster compounds, we report on the use of three different classes of room-temperature ionic liquids for the synthesis of the pentabismuth-tris(tetragallate) salt, Bi₅[GaCl₄]₃, characterized by X-ray diffraction. The Bi₅[GaCl₄]₃ salt was prepared by reduction of BiCl₃ using gallium metal in ionic liquid reaction media containing a strong Lewis acid, GaCl₃. The ionic liquids; trihexyltetradecyl phosphonium chloride [Th-Td-P⁺]Cl^?, 1-dodecyl-3-methylimidazolium chloride [Dod-Me-Im⁺]Cl^? and N-butyl-N-methylpyrrolidinium chloride [Bu-Me-Pyrr⁺]Cl^? from three of the main classes of ionic liquids were used in synthesis. Reactions using ionic liquids composed of the trihexyltetradecyl phosphonium cation [Th-Td-P⁺] and the anions; tetrafluoroborate [BF₄ ^?], bis(trifluoro-methyl sulfonyl) imide [(Tf)₂N^?] and hexafluorophosphate [PF₆ ^?] were also investigated.     

Thermophysical and Spectroscopic Studies of Pure 1-Butyl-3-methylimidazolium Tetrafluoroborate and Its Aqueous Mixtures

Intermolecular interactions in the aqueous mixtures of the room temperature ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]), have been studied. The thermophysical properties: density ρ, speed of sound u, specific conductivity κ and refractive index n _D have been measured over the whole composition range at different temperatures (293.15–323.15 K) and are discussed. The results from thermophysical measurements are explained with the help of spectroscopy. In order to interpret the nature of molecular interactions occurring between [BMIM][BF₄] and water molecules, as well as to identify the moieties in which interactions are taking place, ¹H, ¹³C NMR and FT-IR spectra of the solutions have been studied. Excess molar volume V ^E, excess molar isentropic compressibility $ K_{S}^{\text{E}} $ , partial molar excess volume $ V_{i}^{\text{E}} $ , partial molar excess isentropic compressibility $ K_{S,i}^{\text{E}} $ , deviation in specific conductivity ?κ, and deviation in refractive index ?R have also been determined and analyzed to have a better understanding of the interactions taking place between the different components. Additionally, the excess ultrasonic speed u ^E and excess isentropic compressibility $ k_{S}^{\text{E}} $ , in terms of volume fractions, have been calculated and analyzed. It has been observed that temperature has a significant effect on the thermophysical properties of the studied system. Spectroscopic measurements confirm the disruption of ion-pair interactions of [BMIM][BF₄] and hydrogen-bonded network of water in the aqueous mixture of [BMIM][BF₄].     

Efficient synthesis of bis-indolyloxindoles from (phenylimino)indolin-2-ones and 1<Emphasis Type="Italic">H</Emphasis>-indole catalyzed by <Emphasis Type="Italic">p</Emphasis>-toluenesulfonic acid

p-Toluenesulfonic acid (p-TSA) efficiently catalyzed the reaction of (phenylimino)indolin-2-ones with 1H-indole in dichloromethane at room temperature to afford 3,3-di(indolyl)indolin-2-ones in 2-3 min with high yields.     

Enol ethers and acetals: acylation with dichloroacetyl,acetyl and benzoyl chloride in ionic liquid medium

Synthesis of 4-alkoxy-1,1-dichloro-3-alken-2-ones [CHCl₂C(O)C(R²)C(R¹)-OR, where R, R¹, R² = Et, H, H; Me, Me, H; Et, H, Me; Me, –(CH₂)₂–; Me, –(CH₂)₃–; Et, Et, H; Et, Bu, H; Et, i-Pr, H; Et, i-Bu, H; Me, Ph, H; Me, thien-2-yl, H] from acylation of enol ethers and acetals with dichloroacetyl chloride, in ionic liquid ([BMIM][BF₄] or [BMIM][PF₆]) is reported. The synthesis of alkenones [R³–C(O)C(R²)C(R¹)-OR], where R/R¹/R²/R³ = Et/H/H/Ph, t-Bu/H/H/Ph, Me/-(CH₂)₄/Ph, Me/-(CH₂)₄/Me] from the reaction of enol ethers with benzoyl chloride or acetyl chloride, in ionic liquid [BMIM][BF₄], is also reported. Last products are described for the first time.