1,5-Diazabicyclo[3.1.0]hexanes and 1,6-diazabicyclo[4.1.0]heptanes: a new method for the synthesis,quantum-chemical calculations,and X-ray diffraction study

A new method was developed for the synthesis of 6-substituted 1,5-diazabicyclo[3.1.0]hexanes and 7-substituted 1,6-diazabicyclo[4.1.0]heptanes by condensation of N-monohalotrimethylene- and N-monohalotetramethylenediamines with carbonyl compounds in the presence of bases. X-ray diffraction studies and quantum-chemical B3LYP/6-31G* calculations demonstrated that the conformations of the resulting bicyclic systems are stabilized by stereoelectronic interactions. As a result, a boat conformation prevails in 1,5-diazabicyclo[3.1.0]hexanes, whereas the energies of chair, half-chair, and boat conformations of 1,6-diazabicyclo[4.1.0]heptanes are equalized.     

Stereoselective synthesis of substituted 2,5-diazabicyclo[2.2.1]heptanes by iodine-mediated cyclization of optically pure compounds containing the 4,5-diamino-1,7-octadiene and 1,2-diamino-4-alkene moieties

3,7-endo-Disubstituted 2,5-diazabicyclo[2.2.1]heptanes were obtained by iodo-cyclization of N,N′-di[(S)-1-phenylethyl]-(E,E)-4,5-diamino-1,8-diphenyl-1,7-octadiene and substituted N,N′-di[(S)-1-phenylethyl]-1,2-diamino-4-alkenes. Removal of only one N-substituent of the bridged piperazines was achieved by reduction with ammonium formate and Pd/C. Unexpected cleavage of the skeleton of vinyl-substituted bridged piperazines was observed using hydrogen, leading to substituted 3-aminopyrrolidines.     

Organosilicon-directed substitution reaction on bicyclic gem-dihalocyclopropanes. A facile formation of bicyclo[4.1.0]heptan-7-one dialkyl acetals

Treatment of 1-trimethylsilyl-7,7-dihalobicyclo[4.1.0]heptanes with silver tri-fluoroacetate in an alcoholic solvent such as methanol or ethanol at 0–60 °C gives moderate to good yields of 1-trimethylsilylbicyclo[4.1.0]heptan-7-one dialkyl acetal compounds, which result from the substitution of halogens on the cyclopropane ring.     

Dihalocarbene insertion reactions into C-H bonds of compounds containing small rings: mechanisms and regio- and stereoselectivities

Novel insertion reactions of dichloro- and dibromocarbene into carbon-hydrogen bonds adjacent to cyclopropane rings are reported. It is found that the predominant isomers formed in the reactions with bicyclo[4.1.0]heptane result from insertion into the endo carbon-hydrogen bonds alpha to the three-membered ring. In the reactions of bicyclo[3.1.0]hexane, however, the exo dihalocarbene insertion products are formed as the major isomers. In some compounds cyclopropane rings "activate" adjacent carbon-hydrogen bonds, whereas other systems containing three-membered rings do not. Moreover, the influence of various substituents (methyl, geminal dimethyl, phenyl, methoxy, and ethoxy) attached to bicyclo[3.1.0]hexane and bicyclo[4.1.0]heptane in dihalocarbene reactions has been studied. The findings can be explained by the concept of maximum orbital overlaps of Walsh orbitals of the cyclopropane rings and the alpha carbon-hydrogen bonds. In stark contrast, selective insertion into the tertiary carbon-hydrogen bonds of the cyclobutane ring in bicyclo[4.2.0]octane is observed.     

Stereoselective cyclopropanation of chiral 5-substituted dihydro-2H-piperazines

The Simmon–Smith cyclopropanation of enantiomerically enriched dehydropiperazines is reported. The reaction is highly stereoselective and allowed us to prepare new, enantiomerically enriched 3-substituted 2,5-diazabicyclo[4.1.0]heptane cores with high diastereomeric purity and a relative anti-configuration, which was assigned by NMR analysis.     

Diazabicycloalkanes with nitrogen atoms in the nodal positions. 8. Effect of c-substituents on the N-methylation of 1,4-diazabi cyclo[2.2.2]octanes and the demethylation of their bisquaternary salts

The introduction of substituents with various inductive constants in the 2 position of the diazabicyclo]2.2.2]octane ring gives rise to a change in the pK_a values and affects the ease of introduction of a methyl group in the 1 and 4 positions, as well as the rate of demethylation of the bisquaternary salts from the 1 position. When 1,4-diazabicyclo[2.2.2]octane is treated with a sufficiently strong nucleophile, the ring is opened to give a piperazine derivative.See [1] for communication 7.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 250–255, February, 1982.     

Synthesis and properties of 7,7-dichloro-3,4-benzobicyclo[4.1.0]heptane, its tricarbonylchromium complexes, and isomeric 7-chloro-3,4-benzobicyclo[4.1.0]heptanes

The reaction of Cr(CO)₆ with 7,7-dichloro-3,4-benzobicyclo[4.1.0]heptane gave the correspondingexo- andendo-chromium tricarbonyl complexes in a ratio of 4.5:1. The structures of the resulting compounds were established by NMR spectroscopy, mass spectrometry, and X-ray structural analysis. Reduction of dichlorobenzobicycloheptane and its chromium tricarbonyl complexes with LiAlH₄ affordedexo- andendo-7-chloro-3,4-benzobicyclo[4.1.0]heptanes in a 3.5:1 ratio. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 720–724, April, 1998.     

Reaction of vinylidenecyclopropanes with aromatic imines in the presence of Lewis acids

1-Methyl-2-(2-methylpropenylidene)-1-phenylcyclopropane, 7-(2-methylpropenylidene)bicyclo[4.1.0]heptane, and (Z)-9-(2-methylpropenylidene)bicyclo[6.1.0]non-4-ene react with N-benzylideneanilines in the presence of boron trifluoride-ether complex to give pyrrolidine derivatives. Reactions of 1-methyl-1-phenyl-2-diphenylvinylidenecyclopropane with N-benzylideneanilines in the presence of BF₃·Et₂O, Yb(OTf)₃, or Sc(OTf)₃ lead to the formation of substituted 1,2,3,4-tetrahydroquinolines. 7-Diphenylvinylidenebicyclo[4.1.0]heptane in the presence of BF₃·Et₂O undergoes isomerization into 5-phenyl-8,9,10,11-tetrahydro-7H-cyclohepta[a]naphthalene.     

Formation of the double addition products of donor-acceptor cyclopropanes with 2-pyrazolines in the presence of Lewis acids

A reaction of excess of cyclopropane-1,1-dicarboxylates substituted at position 2 with 2-pyrazolines in the presence of 3 equiv. of GaCl₃ at 5 °C selectively resulted in the cyclopropanes double addition products, viz., N-substituted 1,2-diazabicyclo[3.3.0]octanes. In this case, the first molecule of the starting cyclopropane formed the bicyclic system, whereas the second added at the N-H bond of the adduct formed. When catalytic amount of Sc(OTf)₃ was used in this reaction instead of GaCl₃ at 40 °C, besides the corresponding 1,2-diazabicyclo[3.3.0]-octanes, another type of cyclopropane double addition products, viz., N-alkyl-2-pyrazolines, was formed, in which the alkyl chain was assembled from two molecules of the starting cyclopropane. A plausible mechanism for the transformations observed was suggested.     

Synthesis and dynamic NMR studies of the 3,7-diazabicyclo[4.1.0]heptane system

A new bicyclic system, 3,7-diazabicyclo[4.1.0]heptane, has been prepared from 3-(ethoxycarbonyl)-7,3-oxazabicyclo[4.1.0]heptane by reaction with sodium azide and reduction of the resulting tosyloxy azide with lithium aluminum hydride. The molecule can exist in four stereoisomeric half-chairs, depending on the configuration of the two nitrogen atoms. Half-chair ring reversal and piperidine nitrogen inversion are fast on the NMR time scale at all observed temperatures. Inversion of the secondary aziridine nitrogen becomes slow as the temperature is lowered (T_c= ?10°C). Complete analysis of the ¹H spectrum was possible with the 1,5,5-trideuteriated analog. At slow exchange, two aziridine invertomers are present with an exo/endo ratio of approximately 0.7 in toluene-d₈, 0.7 in CH₂Cl₂ and 1.7 in CHCl₃/CH₂Cl₂. The free energy of activation for nitrogen inversion is 13.2 kcal mol^?1 at ?10°C in CHCl₃/CH₂Cl₂.     

Preparation of N-arylamines from 2-oxo-7-azobicyclo[4.1.0]heptanes

A wide range of N-phenylated secondary amines were prepared directly from 2-oxo-7-azobicyclo[4.1.0]heptanes using 4-nitrobenzoic acid as acid catalyst. The intermediate enol esters could also be isolated under similar conditions. A catalytic cycle is proposed.     

1-Azaspiro[3.3]heptane as a Bioisostere of Piperidine**

1-Azaspiro[3.3]heptanes were synthesized, characterized, and validated biologically as bioisosteres of piperidine. The key synthesis step was thermal [2+2] cycloaddition between endocyclic alkenes and the Graf isocyanate, ClO₂S−NCO, to give spirocyclic β-lactams. Reduction of the β-lactam ring with alane produced 1-azaspiro[3.3]heptanes. Incorporation of this core into the anesthetic drug bupivacaine instead of the piperidine fragment resulted in a new patent-free analogue with high activity.     

Formation of titanacyclobutenes with a spiro-bonded cyclopropane

The reaction of titanium cyclopropylidene complexes, prepared by the reductive titanation of 7,7-dichlorobicyclo[4.1.0]heptanes, with alkynes produced air and moisture stable titanacyclobutenes with a spiro-bonded cyclopropane.     

13C-NMR-spektren von bicyclo[n.1.0]alkenen

The ¹³C-NMR spectra of some bicyclo[3.1.0]hex-3-en-2-ols and of some bicyclo[3.1.0]hex-3-en-2-ones are described. The bond parameters of bicyclo[3.1.0]hex-3-en-2-one are derived from a structure determination of endo-6-methoxy-1,3,6-triphenylbicyclo[3.1.0]hex-3-en-2-one. The electron density is calculated by the EHT method, and correlated with the ¹³C NMR shifts. For comparison the ¹³C NMR spectrum of a bicyclo[4.1.0]hepta-1,5-dione derivative is analysed. The influence of a cyclopropane system attached to a five-membered and to a six-membered ring is elucidated. Whereas the five-membered ring shows conjugation between the carbonyl group and the cyclopropane system, the same effect is not observed in the six-membered ring analogue. This is explained by the highly rigid structure of the five-membered ring.     

The Interaction of Walsh-Orbitols in Diademane and Related Hydrocarbons

To obtain further information concerning the interaction between Walsh-orbitols of ‘conjugated’ cyclopropane rings, the photoelectron spectra of the following compounds have been recorded: bicyclo[4.1.0]heptane 1 , cis- and trans-tricyclo[5.1.0^{3, 5}]octane 2, 3 , diademane 4 , trans-pentacyclo[3.3.2.0^{2, 9}.0^{4, 10}, 0^{6, 8}]decan 5 and bicyclo[4.1.0]heptene-2 6 . The first bands in the PE.-spectra of these compounds have been assigned on the basis of a ZDO HMO-approximation. For 2 and 4 the value for resonance integral between linked 2p atomic orbitals of two adjacent eclipsed cyclopropane rings is found to be ?1.73 eV.     

The catalytic hydrogenolysis of 1-phenylbicyclo[4.1.0]heptane and the corresponding azidirine and epoxide

The hydrogenolysisof 1-phenylbicyclo[4.1.0]heptane (1a), cis-1-phenyl-2-methylbicyclo[4.1.0]heptane (1b), 1-phenyl-7-azabicyclo[4.1.0]heptane (2) and 1-phenyl-7-oxabicyclo[4.1.0]heptane (3) was studied using Ni, Pd, Rh and Pt as catalysts. The hydrogenolysis of the C₁C₇ bond of 1a and 1b led to the selective formation of trans-1-phenyl-2-methylcyclohexane (4a) with retention of configuration. Compound 1a gave not only 4a but also phenylcycloheptane (6a), which is the product of C₁C₆ bond fission, and the ratio of 6a to 4a increased in the sequence: Ni ? Pd, Rh < Pt. No C₁C₆ bond fission was observed in the hydrogenolysis of 1b. These results can be explained by a mechanism involving the formation of the π-benzyl complex.trans-2-Phenylcyclohexylamine (8) was obtained stereoselectively in the hydrogenolysis of 2 over Raney Ni. This selective formation can be ascribed to the competition of “SN i” and “radical” processes. The Pd catalysed hydrogenolysis gave cis-2-phenylcyclohexylamine (9) as the main product, while the presence of sodium hydroxide promoted the formation of 8.Raney Ni catalysed hydrogenolysis of 3 yielded a mixture of phenylcyclohexane (13) and 2-phenylcyclohexanols (10 and 11). trans-2-Phenylcyclohexanol (10) was the dominant isomer; the hydrogenolysis resulted in the predominant configurational retention. Compound 13 was confirmed to be produced via 1-phenylcyclohexene (12). This deoxygenation may be explained by a mechanism involving the radical cleavage reaction of 3. The presence of sodium hydroxide led to the formation of cis-2-phenylcyclohexanol (11). The Pd catalysed hydrogenolysis also gave mainly 11.The difference in behaviour of cyclopropane, azidirine and epoxide we ascribe to the differences in the affinity for the catalyst and differences in the electronegativity between C, N and O atoms.     

Isolation and structural elucidation of a new sildenafil analogue from a functional coffee

A sildenafil analogue was detected in a functional coffee sample labelled to have male sexual performance enhancement effects. This analogue was isolated and purified by flash chromatography and preparative high-performance liquid chromatography. Its structure was elucidated using high-resolution mass spectrometry; electrospray ionization-tandem mass spectrometry; and nuclear magnetic resonance spectroscopy, ultraviolet spectroscopy, and infrared spectroscopy. Compared with sildenafil, instead of an N-methylpiperazinyl moiety, ring opening of the piperazine ring with the loss of a carbon atom resulted in a substituted benzenesulfonamide. The chemical name of this analogue is N-[2-(dimethylamino)ethyl]-4-ethoxy-3-(1-methyl-7-oxo-3-propyl-6,7-dihydro-1H-pyrazolo[4,3-d]pyrimidin-5-yl)benzenesulfonamide. It is named descarbonsildenafil because it has one less carbon atom when compared with sildenafil.     

Synthesis of 6,8-diazabicyclo

[formula: see text] Starting with the proteinogenic amino acid (S)-glutamate, a general method for the synthesis of 3-(piperazin-2-yl)propionic acid esters 7 with various substituents at N-4 of the piperazine ring system is presented. An intramolecular ester condensation of 7 is the key step in the formation of the 6,8-diazabicyclo[3.2.2]nonane derivatives 8-10, which are of interest as conformationally restricted piperazines.     

PtCl2-mediated cycloisomerization of unsaturated propargylic carboxylates

The PtCl₂-mediated cycloisomerization of unsaturated propargylic carboxylates yields differently functionalized bicyclo[4.1.0]heptane enol esters from moderate to good yield, in a very diastereoselective manner. We have prepared and submitted to PtCl₂-catalyzed cycloisomerization a series of differently substituted hept-1-en-6-ynes with different O-acyl (acetyl, trichloroacetyl, 3,4,5-trimethoxybenzoyl, etc.) protecting groups at propargylic positions, investigating also the effect of the geometry at the double bond, as well as the effect of the number of substituents at the alkene moiety. As a result, we have found that the O-acetyl migrating group is the best one in terms of simplicity and chemical yields. In this reaction we have isolated mixtures of compounds formed by minor 1-acetoxy-allenes and major bicyclo[4.1.0]heptane derivatives. Major products are the result of a sequential process involving steps of cycloisomerization plus cyclopropanation, followed by acyl migration. The basic methanolysis (K₂CO₃, MeOH) of these intermediates gave mixtures of cis and trans-caran-2-ones. This two-step protocol (cycloisomerization plus basic methanolysis) for the syntheses of α,β-unsaturated cyclopropyl ketones constitutes a synthetic alternative to the usual unfriendly, intramolecular cyclopropanation of unsaturated α-diazocarbonyl derivatives. The formation of these bicyclo[4.1.0]heptane derivatives is a simple, but efficient entry into the skeleton of the ‘carane’ family of natural products.     

A Stereochemical Study of the Isomerization of Cyclopropyl Ethers to Allyl Ethers Catalyzed with Zinc Iodide

Optically active 1-alkoxybicyclo[4.1.0]heptane was converted using zinc iodide as a catalyst to 2-alkoxymethylidenecyclohexane without loss of optical purity. The mechanism of the isomerization was studied using a stereochemical analysis of the product and deuterium labeling experiments. The results indicated that the isomerization takes place through a stepwise mechanism that involves an attack of zinc iodide on the cyclopropane ring to cause ring opening, followed by an intramolecular 1,2-hydride shift with liberation of the zinc iodide.