Thermo‐responsive shape memory behavior of poly(styrene‐b‐isoprene‐b‐styrene)/ethylene‐1‐octene copolymer thermoplastic elastomer blends

Thermally‐triggered shape memory polymers (SMPs) are smart materials, which are capable of changing their shapes when they are exposed a heat stimulant. Blending semi‐crystalline and elastomeric polymers is an easy and low‐cost way to obtain thermo‐responsive SMPs. In this work, novel poly(ethylene‐co‐1‐octene) (PEO) and poly(styrene‐b‐isoprene‐b‐styrene) (SIS) thermoplastic elastomer blends were prepared via melt blending method. The morphological, mechanical, rheological properties and shape memory behaviours of the blends were investigated in detail. In morphological analysis, co‐continuous morphology was found for 50 wt% PEO/50 wt% SIS and 60 wt% PEO/40 wt% SIS (60PEO/40SIS) blends. The shape memory analysis performing by dynamic mechanical analyzer showed that the 60PEO/40SIS blend also exhibited the optimum shape memory performance with 95.74% shape fixing and 98.98% shape recovery. Qualitatively shape memory analysis in hot‐water pointed out that the amount of semi‐crystalline PEO promotes shape fixing ability of the blends whereas SIS content enhances shape recovery capability. Although the SIS and PEO are immiscible polymers, the blends of them were exhibited good elastomeric properties with regard to tensile strength, toughness, and elongation at break.     

Hydrogel‐coated polyurethane/urea shape memory polymer foams

Shape memory polymers (SMPs) are a class of responsive polymers that have attracted attention in designing biomedical devices because of their potential to improve minimally invasive surgeries. Use of porous SMPs in vascular grafts has been proposed because porosity aids in transfer of fluids through the graft and growth of vascular tissue. However, porosity also allows blood to leak through grafts so preclotting the materials is necessary. Here hydrogels have been synthesized from acrylic acid and N‐hydroxyethyl acrylamide and coated around a porous SMP produced from lactose functionalized polyurea‐urethanes. The biocompatibility of the polymers used to prepare the cross‐linked shape memory material is demonstrated using an in vitro cell assay. As expected, the hydrogel coating enhanced fluid uptake abilities without hindering the shape memory properties. These results indicate that hydrogels can be used in porous SMP materials without inhibiting the shape recovery of the material. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1389–1395     

Fabrication of well‐defined shape memory graft polymers derived from biomass: An insight into the effect of side chain architecture on shape memory properties

Fully sustainable shape memory polymers (SMPs) derived from ethyl cellulose (EC, derived from cellulose), tetrahydrofurfuryl methacrylate (THFMA, derived from furfural), and lauryl methacrylate (LMA, derived from fatty acids) were prepared via “grafting from” atom transfer radical polymer (ATRP). The “grafting from” ATRP strategy allows to fabricate SMPs with EC as a backbone, and LMA and THFMA copolymer as a side chain. By utilizing the one‐pot and sequential monomer addition approach, two types of SMPs with random/semi‐block side chain architectures were obtained, respectively. Random/semi‐block side chain architecture of SMPs was confirmed by DSC, DMA, SAXS, and TEM. The presence of microphase separation in the SMPs with semi‐block side chain architecture provided two distinct thermal transitions, which was needed for triple‐shape memory behavior. Shape memory study showed that SMPs with semi‐block side chain architecture exhibited excellent triple‐shape memory property, and also had higher shape recovery speed and shape recovery ratio than those with random side chain architecture. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1711–1720     

Physical Microfabrication of Shape‐Memory Polymer Systems via Bicomponent Fiber Spinning

As emerging technologies continue to require diverse materials capable of exhibiting tunable stimuli‐responsiveness, shape‐memory materials are of considerable significance because they can change size and/or shape in controllable fashion upon environmental stimulation. Of particular interest, shape‐memory polymers (SMPs) have secured a central role in the ongoing development of relatively lightweight and remotely deployable devices that can be further designed with specific surface properties. In the case of thermally‐activated SMPs, two functional chemical species must be present to provide (i) an elastic network capable of restoring the SMP to a previous strain state and (ii) switching elements that either lock‐in or release a temporary strain at a well‐defined thermal transition. While these species are chemically combined into a single macromolecule in most commercially available SMPs, this work establishes that, even though they are physically separated across one or more polymer/polymer interfaces, their shape‐memory properties are retained in melt‐spun bicomponent fibers. In the present study, we investigate the effects of fiber composition and cross‐sectional geometry on both conventional and cold‐draw shape memory, and report surprisingly high levels of strain fixity and recovery that generally improve upon strain cycling.

     

Light Polarization‐Controlled Shape‐Memory Polymer/Gold Nanorod Composite

It is demonstrated that light polarization can be used to control photothermal effect‐based shape‐memory polymers (SMPs). Gold nanorods (AuNRs) are embedded in poly(vinyl alcohol) (PVA) and aligned by stretching the composite film. By changing the polarization direction of the incident laser at 785 nm with respect to the film stretching direction, the magnitude of the longitudinal surface plasmon resonance of AuNRs can be varied continuously, which determines the amount of heat generated upon laser exposure and thus the local temperature rise in the composite relative to the glass transition of the PVA matrix. Consequently, the temporary‐to‐permanent shape recovery process of the composite can be made to occur to different extents by tuning the polarization of laser while keeping all other conditions unchanged. This finding enhances the toolbox for controlling light‐triggered SMPs.

     

Liquid Crystal Networks on Thermoplastics: Reprogrammable Photo‐Responsive Actuators

Arbitrary shape (re)programming is appealing for fabricating untethered shape‐morphing photo‐actuators with intricate configurations and features. We present re‐programmable light‐responsive thermoplastic actuators with arbitrary initial shapes through spray‐coating of polyethylene terephthalate (PET) with an azobenzene‐doped light‐responsive liquid crystal network (LCN). The initial geometry of the actuator is controlled by thermally shaping and fixing the thermoplastic PET, allowing arbitrary shapes, including origami‐like folds and left‐ and right‐handed helicity within a single sample. The thermally fixed geometries can be reversibly actuated through light exposure, with fast, reversible area‐specific actuation such as winding, unwinding and unfolding. By shape re‐programming, the same sample can be re‐designed and light‐actuated again. The strategy presented here demonstrates easy fabrication of mechanically robust, recyclable, photo‐responsive actuators with highly tuneable geometries and actuation modes.     

Porous shape memory polymers: Design and applications

Porous shape memory polymers (SMPs) exhibit geometric and volumetric shape change when actuated by an external stimulus and can be fabricated as foams, scaffolds, meshes, and other polymeric substrates that possess porous three-dimensional macrostructures. These materials have applications in multiple industries such as textiles, biomedical devices, tissue engineering, and aerospace. This review article examines recent developments in porous SMPs, with a focus on fabrication methods, methods of characterization, modes of actuation, and applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1300–1318     

A review of shape memory polymers bearing reversible binding groups

Shape memory polymers (SMP) can be deformed to a stable, temporary shape and recovered to their original shape by applying a stimulus. These networks rely on the presence of two types of net points to establish their permanent and temporary shapes. Classical strategies to stabilize temporary shapes rely on cooling below T_g/T_m where macromolecules become pinned in a stressed state. Recovery of the SMP usually involves heating to above the transition temperature where the permanent shape is remembered. Employing reversible binding groups (RBGs) in SMPs has emerged as an alternative strategy for stabilizing temporary shapes or imparting recyclability of the permanent shape. The use of dynamic chemistry often engenders additional functionality such as intrinsic self-healing characteristics or alternative shape recovery triggering strategies. SMPs bearing both supramolecular and covalent RBGs will be reviewed with an emphasis on hydrogen bonding, ionic interactions, metal–ligand coordination, and dynamic covalent exchange and addition reactions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1340–1364     

A fully coupled thermo‐viscoelastic finite element model for self‐folding shape memory polymer sheets

The thermo‐mechanical response of heat activated shape memory polymers (SMPs) has been investigated using a thermo‐viscoelastic finite element analysis that accounts for external and internal heat sources. SMPs can be thermally stimulated by external heat sources, such as temperature and surface heat flux, or from internal viscous heating. Viscous heating can significantly affect the response of SMP sheets by increasing the temperature during pre‐strain, which accelerates stress relaxation. This stress relaxation results in a slower shrinking rate when the SMP is reheated. Viscous heating also causes an increase in temperatures during unconstrained recovery. The predicted results elucidate how the coupled thermo‐mechanical loading conditions affect folding and unfolding of SMP sheets in response to localized heating in a hinged region. A parametric study of sheet thickness, hinge width, degree of pre‐strain, and hinge surface temperature is also conducted. The validated results can provide guidelines for the design of functional, self‐folding structures. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1207–1219     

Thermoreversibly Crosslinked Poly(ε‐caprolactone) as Recyclable Shape‐Memory Polymer Network

A new concept to build shape memory polymers (SMP) combining outstanding fixity and recovery ratios (both above 99% after only one training cycle) typical of chemically crosslinked SMPs with reprocessability restricted to physically crosslinked SMPs is demonstrated by covalently bonding, through thermoreversible Diels–Alder (DA) adducts, star‐shaped poly(ε‐caprolactones) (PCL) end‐functionalized by furan and maleimide moieties. A PCL network is easily prepared by melt‐blending complementary end‐functional star polymers in retro DA regime, then by curing at lower temperature to favour the DA cycloaddition. Such covalent network can be reprocessed when heated again at the retro DA temperature. The resulting SMP shows still excellent shape memory properties attesting for its good recyclability.

     

Quadruple‐shape‐memory effect of TPI/LDPE/HDPE composites

Shape‐memory polymers are important smart materials with potential applications in smart textiles, medical devices, and sensors. We prepared trans‐1,4‐polyisoprene, low‐density polyethylene (LDPE), and high‐density polyethylene (HDPE) shape‐memory composites using a simple mechanical blend method. The mechanical, thermal, and shape‐memory properties of the composites were studied. Our results showed that the shape‐memory composites could memorize 3 temporary shapes, as revealed by the presence of broad melting transition peaks in the differential scanning calorimetry curves. In the trans‐1,4‐polyisoprene/LDPE/HDPE composites, the cross‐linked network and the crystallization of the LDPE and HDPE portions can serve as fixed domains, and all crystallizations can act as reversible domains. We proposed a schematic diagram to explain the vital role of the cross‐linked network and the crystallization in the shape‐memory process.     

A Shape‐Memory Supercapacitor Fiber

A shape‐memory, fiber‐shaped supercapacitor is developed by winding aligned carbon nanotube sheets on a shape‐memory polyurethane substrate. Despite its flexibility and stretchability, the deformed shapes under bending and stretching can be “frozen” as expected and recovered to the original state when required. Its electrochemical performances are well‐maintained during deformation, at the deformed state and after the recovery.     

Heating/Solvent Responsive Shape‐Memory Polymers for Implant Biomedical Devices in Minimally Invasive Surgery: Current Status and Challenge

This review is about the fundamentals and practical issues in applying both heating and solvent responsive shape memory polymers (SMPs) for implant biomedical devices via minimally invasive surgery. After revealing the general requirements in the design of biomedical devices based on SMPs and the fundamentals for the shape‐memory effect in SMPs, the underlying mechanisms, characterization methods, and several representative biomedical applications, including vascular stents, tissue scaffolds, occlusion devices, drug delivery systems, and the current R&D status of them, are discussed. The new opportunities arising from emerging technologies, such as 3D printing, and new materials, such as vitrimer, are also highlighted. Finally, the major challenge that limits the practical clinical applications of SMPs at present is addressed.     

New Strategy to Access Dual‐Stimuli‐Responsive Triple‐Shape‐Memory Effect in a Non‐overlapping Pattern

Multistimuli‐responsive shape‐memory polymers are highly desirable in various applications, and numerous modes have been developed in recent years. However, most of them need to reprogram before they are ready to respond to another stimulus while one is triggered. Here, a new strategy is developed to achieve dual‐stimuli‐responsive triple‐shape memory with non‐overlapping effect in one programming cycle. Here, a series of poly(l ‐lactide)‐poly(tetramethylene oxide) glycol copolymers (PLA‐PTMEG‐A) is prepared by selected dangling photoresponsive anthracene moieties on the crystalline PTMEG backbone. The architectures of the copolymers are well‐controlled in order to keep a good balance between the crystallinity of the soft segment and the mobility of the anthracene moieties. Thus, PLA‐PTMEG‐A's can respond to heat and light with non‐overlapping effect. The thermally‐induced shape‐memory effect (TSME) is realized by the crystallization–melting transition of PTMEG soft segments, while the light‐induced shape‐memory effect (LSME) is achieved by the reversible photodimerization of anthracene groups. In view of the non‐overlapping effect of TSME and LSME in the copolymers, a triple‐shape‐memory effect triggered by dual‐stimuli is realized in one programming and recovery cycle.

     

Shape‐Memory Platinum(II) Complexes: Intelligent Vapor‐History Sensor with ON–OFF Switching Function

A novel platinum(II)–diimine complex, [Pt(CN)₂(H₂dcphen)] ( 1 ; H₂dcphen=4,7‐dicarboxy‐1,10‐ phenanthroline), was synthesized and its vapochromic shape‐memory behavior was evaluated. The as‐synthesized amorphous purple solid, [Pt(CN)₂(H₂dcphen)]?2 H₂O ( 1 P ), exhibited vapochromic behavior in the presence of alcoholic vapors through transformation to a red, crystalline, porous, vapor‐adsorbed form, 1 R?vapor . The obtained 1 R?vapor complex released the adsorbed vapors upon heating without collapse of the porous structure. The vaporfree, porous 1 R?open could detect water or n‐hexane vapor, although these vapors could not induce 1 P ‐to‐ 1 R?vapor transformation, and 1 R?open could easily be converted to the initial 1 P by manual grinding. These results indicate that 1 is a new shape‐memory material that functions through formation and collapse of the porous framework with an emission change upon vapor‐adsorption and grinding; this enables it to exhibit vapor history and ON–OFF switching sensing functions.     

A Facile Strategy to Fabricate Multishape Memory Polymers with Controllable Mechanical Properties

A facile blending strategy to fabricate multishape memory polymers (SMPs) with only one sort of phase transition material has been reported. In this work, olefin block copolymer (OBC) and styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene (SEBS), which are both physically crosslinked, are blended with crystalline paraffin together. Due to the different interactions between polymer matrices and paraffin, the paraffin penetrated in OBC and SEBS exhibit separated melting transitions. It is quite interesting that merely paraffin distributed in OBC also shows two distinct melting transitions with enough OBC content in composites. Therefore, excellent quadruple shape memory effect can be achieved with a maximum of three melting transitions. Furthermore, through adjusting the polymer species and content, the mechanical and rheological properties can be conveniently tuned to a great extent. Compared with the reported strategies, this simple and controllable method sheds light on rapid design of multi‐SMPs using inexpensive raw materials, which greatly paves the way for multi‐SMPs from laboratory to factory.

     

Shape Memory Effect of Bacterial Poly[(3‐hydroxybutyrate)‐co‐(3‐hydroxyvalerate)]

Summary: A bacterial poly[(3‐hydroxybutyrate)‐co‐(3‐hydroxyvalerate)] biosynthesized by Pseudomonas sp. HJ‐2 was found to be a shape memory polymer. Permanent shapes were set by annealing at room temperature the samples that had been pre‐treated above 95 °C in specified shapes. The temporary shapes were set by stretching and holding the elongated samples. Thermal shrinkage began at 45 °C and stopped at 75 °C to recover to their permanent shapes. Apparently, the orientation induced the formation of hard segments that were responsible for setting the temporary shapes. The shape memory effect of this polymer was explained based on the DSC and XRD results at different phases.

The recovery of a coil shape upon heating a strip of HJ‐2 PHB35V, demonstrating the polymers shape memory effect.     

Constructing Mie‐Scattering Porous Interface‐Fused Perovskite Films to Synergistically Boost Light Harvesting and Carrier Transport

Light harvesting (LH) and carrier transport abilities of a photoactive layer, which are both crucial for optoelectronic devices such as solar cells and photodetectors (PDs), are typically hard to be synergistically improved. Taking perovskite as an example, a freeze‐drying recrystallization method is used to construct porous films with improvements of both LH and carrier transport ability. During the freeze‐drying casting process, the rapid solvent evaporation produces massive pores, the sizes of which can be adjusted to exploit the Mie scattering for enhancement of the LH ability. Meanwhile, owing to the strong iconicity, the interface between perovskite nanocrystals fused during recrystallization, which favors carrier transport. Subsequently, PDs based on these Mie porous and interface‐fused films show a high on/off ratio of more than 10⁴ and an external quantum efficiency value of 658 % under 9 V bias and 520 nm light irradiation.     

Memory chromic polyurethane with tetraphenylethylene

This article reports a chromic polymer, which is responsive to its shape memory properties and has both the behavior of shape memory polymers and chromic materials. We employed a strategy to fabricate such a smart material, which represents a new principle for making chromic materials. This material is made of shape memory polyurethane with tetraphenylethylene units (0.1 wt %) covalently connected to the soft‐segments (PCL, M_w = 4000). The material displays biocompatibility, shape fixity of 88–93%, and almost 100% shape recovery and has reversible mechanochromic, solvatochromic, and thermochromic shape memory effect. The memory chromism represented by the reversible change of emission intensity shows negative correlation with shape fixity, temperature, and existence of solvent. It may be explained that when the soft segments are molten or dissolved in solvent, the shape recovery switch is open, the AIE units are free from crystal binding and can migrate easily to larger areas, thus the AIE units/particles are far apart from each other and the barrier for rotation of phenyl groups is reduced, which lead to the reduction of emission intensity, appeared by no colors or pale colors, and vice versa. Since the switch is a fundamental structural character of SMPs, the shape memory properties have led to the chromism and we call this memory chromic. © 2013 Wiley Periodicals, Inc. J. Polym. Sci. Part B: Polym. Phys. 2014 , 52, 104–110     

Multicolor Fluorescence Writing Based on Host–Guest Interactions and Force‐Induced Fluorescence‐Color Memory

A new strategy is reported for multicolor fluorescence writing on thin solid films with mechanical forces. This concept is illustrated by the use of a green‐fluorescent pentiptycene derivative 1 , which forms variably colored fluorescent exciplexes: a change from yellow to red was observed with anilines, and fluorescence quenching (a change to black) occurred in the presence of benzoquinone. Mechanical forces, such as grinding and shearing, induced a crystalline‐to‐amorphous phase transition in both the pristine and guest‐adsorbed solids that led to a change in the fluorescence color (mechanofluorochromism) and a memory of the resulting color. Fluorescence drawings of five or more colors were created on glass or paper and could be readily erased by exposure to air and dichloromethane fumes. The structural and mechanistic aspects of the observations are also discussed.