Alkali‐Metal‐Ion‐Assisted Hydrogen Atom Transfer in the Homocysteine Radical

Intramolecular hydrogen atom transfer (HAT) was examined in homocysteine (Hcy) thiyl radical/alkali metal ion complexes in the gas phase by combination of experimental techniques (ion‐molecule reactions and infrared multiple photon dissociation spectroscopy) and theoretical calculations. The experimental results unequivocally show that metal ion complexation (as opposed to protonation) of the regiospecifically generated Hcy thiyl radical promotes its rapid isomerisation into an α‐carbon radical via HAT. Theoretical calculations were employed to calculate the most probable HAT pathway and found that in alkali metal ion complexes the activation barrier is significantly lower, in full agreement with the experimental data. This is, to our knowledge, the first example of a gas‐phase thiyl radical thermal rearrangement into an α‐carbon species within the same amino acid residue and is consistent with the solution phase behaviour of Hcy radical.     

Amide‐Substituted Titanocenes in Hydrogen‐Atom Transfer Catalysis

Two new catalytic systems for hydrogen‐atom transfer (HAT) catalysis involving the N?H bonds of titanocene(III) complexes with pendant amide ligands are reported. In a monometallic system, a bifunctional catalyst for radical generation and reduction through HAT catalysis depending on the coordination of the amide ligand is employed. The pendant amide ligand is used to activate Crabtree's catalyst to yield an efficient bimetallic system for radical generation and HAT catalysis.     

Palladium‐Initiated Radical Cascade Stereoselective Iodofluoroalkylation/Cycloisomerization of Ene‐vinylidenecyclopropanes

A novel and convenient palladium‐initiated radical cascade stereoselective iodofluoroalkylation/cycloisomerization of ene‐vinylidenecyclopropanes with fluoroalkyl iodides has been developed. The reaction proceeds under mild reaction conditions with high atom economy and stereoselectivity, thereby allowing an efficient access to a variety of difluoromethylated or perfluoroalkylated pyrrolidines tethered with an alkyl iodide. Two plausible radical pathways for the transformation have been proposed on the basis of the results of control experiments and previous reports, which in one case it was thought that palladium(0) was an initiator rather than a catalyst.     

1,n‐Hydrogen‐Atom Transfer (HAT) Reactions in Which n≠5: An Updated Inventory

Hydrogen‐atom transfer (HAT) counts amongst the most widely investigated routes to carbon‐centered radicals. Intramolecular processes involving 1,5‐HAT are widespread to promote regioselective radical “C?H activation”. The aim of this review is to draw up a comprehensive inventory of the less commonly encountered 1,n‐radical translocations (n≠5) with the aim to update this topic with the most recent relevant data.     

Reductive Amination by Photoredox Catalysis and Polarity‐Matched Hydrogen Atom Transfer

The excitation of a Ru^II photosensitizer in the presence of ascorbic acid leads to the reduction of iminium ions to electron‐rich α‐aminoalkyl radical intermediates, which are rapidly converted into reductive amination products by thiol‐mediated hydrogen atom transfer (HAT). As a result, the reductive amination of carbonyl compounds with amines by photoredox catalysis proceeds in good to excellent yields and with broad substrate scope and good functional group tolerance. The three key features of this work are 1) the rapid interception of electron‐rich α‐aminoalkyl radical intermediates by polarity‐matched HAT in a photoredox reaction, 2) the method of reductive amination by photoredox catalysis itself, and 3) the application of this new method for temporally and spatially controlled reactions on a solid support, as demonstrated by the attachment of a fluorescent dye on an activated cellulose support by photoredox‐catalyzed reductive amination.     

Photo‐Organocatalysis of Atom‐Transfer Radical Additions to Alkenes

We have found that an organic molecule as simple as p‐anisaldehyde efficiently catalyzes the intermolecular atom‐transfer radical addition (ATRA) of a variety of haloalkanes onto olefins, one of the fundamental carbon–carbon bond‐forming transformations in organic chemistry. The reaction requires exceptionally mild reaction conditions to proceed, as it occurs at ambient temperature and under illumination by a readily available fluorescent light bulb. Initial investigations support a mechanism whereby the aldehydic catalyst photochemically generates the reactive radical species by sensitization of the organic halides by an energy‐transfer pathway.     

Hydrogen Transfer in SAM‐Mediated Enzymatic Radical Reactions

S‐Adenosylmethionine (SAM) plays an essential role in a variety of enzyme‐mediated radical reactions. One‐electron reduction of SAM is currently believed to generate the C5′‐desoxyadenosyl radical, which subsequently abstracts a hydrogen atom from the actual substrate in a catalytic or a non‐catalytic fashion. Using a combination of theoretical and experimental bond dissociation energy (BDE) data, the energetics of these radical processes have now been quantified. SAM‐derived radicals are found to react with their respective substrates in an exothermic fashion in enzymes using SAM in a stoichiometric (non‐catalytic) way. In contrast, the catalytic use of SAM appears to be linked to a sequence of moderately endothermic and exothermic reaction steps. The use of SAM in spore photoproduct lyase (SPL) appears to fit neither of these general categories and appears to constitute the first example of a SAM‐initiated radical reaction propagated independently of the cofactor.     

Reverse Atom‐Transfer Radical Polymerization at Room Temperature

This paper aims at reporting on the “living”/controlled radical polymerization of methyl methacrylate initiated with the benzoyl peroxide (BPO)/Cu^IX (X=Br,Cl)/2,2'‐bipyridine (bpy) redox system at room temperature. No control is observed for the polymerization conducted in bulk and in toluene, whereas a polymer with predetermined molecular weight and rather narrow molecular weight distribution is formed in butanone. The solvent has thus a decisive effect on the reverse atom‐transfer radical polymerization of methyl methacrylate initiated with the BPO/Cu^IX (X = Br,Cl)/bpy ternary system at 25°C.     

Photoredox‐Catalyzed Site‐Selective α‐C(sp3)−H Alkylation of Primary Amine Derivatives

The synthetic utility of tertiary amines to oxidatively generate α‐amino radicals is well established, however, primary amines remain challenging because of competitive side reactions. This report describes the site‐selective α‐functionalization of primary amine derivatives through the generation of α‐amino radical intermediates. Employing visible‐light photoredox catalysis, primary sulfonamides are coupled with electron‐deficient alkenes to efficiently and mildly construct C?C bonds. Interestingly, a divergence between intermolecular hydrogen‐atom transfer (HAT) catalysis and intramolecular [1,5] HAT was observed through precise manipulation of the protecting group. This dichotomy was leveraged to achieve excellent α/δ site‐selectivity.     

Photoinduced Single‐Electron Transfer as an Enabling Principle in the Radical Borylation of Alkenes with NHC–Borane

A photoinduced SET process enables the direct B?H bond activation of NHC–boranes. In contrast to common hydrogen atom transfer (HAT) strategies, this photoinduced reaction simply takes advantage of the beneficial redox potentials of NHC–boranes, thus obviating the need for extra radical initiators. The resulting NHC–boryl radical was used for the borylation of a wide range of α‐trifluoromethylalkenes and alkenes with diverse electronic and structural features, providing facile access to highly functionalized borylated molecules. Labeling and photoquenching experiments provide insight into the mechanism of this photoinduced SET pathway.     

Ab Initio Emulsion Atom‐Transfer Radical Polymerization

Stable latexes of poly(meth)acrylates with predetermined molecular weights, narrow molecular‐weight distributions, and controlled architecture were prepared by true ab initio emulsion atom‐transfer radical polymerization. Water‐soluble (macro)initiators in combination with a hydrophilic catalyst, Cu/tris(2‐pyridylmethyl)amine, initiated the polymerization in the aqueous phase. The catalyst strongly interacted with the surfactant sodium dodecyl sulfate (SDS), thereby tuning the polymerization within nucleated hydrophobic polymer particles. Long‐term stable latexes were obtained, even with SDS loading below 3 wt % relative to monomer. Block and gradient copolymers were prepared in situ. The reaction volume and solid content were successfully increased to 100 mL and 40 vol %, respectively, thus suggesting facile scale‐up of this technique. The proposed setup could be integrated in existing industrial plants used for emulsion polymerization.     

Atom Transfer Radical Polymerization of N‐Isopropylacrylamide

Summary: Controlled polymerization of N‐isopropylacrylamide (NIPAAM) was achieved by atom transfer radical polymerization (ATRP) using ethyl 2‐chloropropionate (ECP) as initiator and CuCl/tris(2‐dimethylaminoethyl)amine (Me₆TREN) as a catalytic system. The polymerization was carried out in DMF:water 50:50 (v/v) mixed solvent at 20 °C. The first order kinetic plot was linear up to 92% conversion. Controlled molecular weights up to 2.2 × 10⁴ and low polydispersities (1.19) were obtained. The living character of the polymerization was also demonstrated by self‐blocking experiments. Block copolymers with N,N‐dimethylacrylamide (DMAAM) and 3‐sulfopropyl methacrylate (SPMA) were successfully prepared.

Molecular weights and polydispersities of polyNIPAAM versus NIPAAM conversion for two different degrees of polymerization.     

Iridium(III)‐Catalyzed Intermolecular C(sp3)−H Insertion Reaction of Quinoid Carbene: A Radical Mechanism

Described herein is an Ir^III/porphyrin‐catalyzed intermolecular C(sp³)?H insertion reaction of a quinoid carbene (QC). The reaction was designed by harnessing the hydrogen‐atom transfer (HAT) reactivity of a metal‐QC species with aliphatic substrates followed by a radical rebound process to afford C?H arylation products. This methodology is efficient for the arylation of activated hydrocarbons such as 1,4‐cyclohexadienes (down to 40 min reaction time, up to 99 % yield, up to 1.0 g scale). It features unique regioselectivity, which is mainly governed by steric effects, as the insertion into primary C?H bonds is favored over secondary and/or tertiary C?H bonds in the substituted cyclohexene substrates. Mechanistic studies revealed a radical mechanism for the reaction.     

Iodinated (Perfluoro)alkyl Quinoxalines by Atom Transfer Radical Addition Using ortho‐Diisocyanoarenes as Radical Acceptors

A simple method for the preparation of functionalized quinoxalines is reported. Starting from readily accessible ortho‐diisocyanoarenes and (perfluoro)alkyl iodides, the quinoxaline core is constructed during (perfluoro)alkylation by atom transfer radical addition (ATRA), resulting in 2‐iodo‐3‐(perfluoro)alkylquinoxalines. The radical cascades are readily initiated either with visible light or by using α,α′‐azobisisobutyronitrile (AIBN). The heteroarene products are obtained in high yields (up to 94 %), and the method can be readily scaled up. Useful follow‐up chemistry documents the value of the novel radical quinoxaline synthesis.     

Catalytic Dibenzocyclooctene Synthesis via Cobalt(III)–Carbene Radical and ortho‐Quinodimethane Intermediates

The metalloradical activation of ortho‐benzallylaryl N‐tosyl hydrazones with [Co(TPP)] (TPP=tetraphenylporphyrin) as the catalyst enabled the controlled exploitation of the single‐electron reactivity of the redox non‐innocent carbene intermediate. This method offers a novel route to prepare eight‐membered rings, using base metal catalysis to construct a series of unique dibenzocyclooctenes through selective C_carbene?C_aryl cyclization. The desired eight‐membered‐ring products were obtained in good to excellent yields. A large variety of aromatic substituents are tolerated. The proposed reaction mechanism involves intramolecular hydrogen atom transfer (HAT) to Co^III–carbene radical intermediates followed by dissociation of an ortho‐quinodimethane that undergoes 8π cyclization. The mechanism is supported by DFT calculations, and the presence of radical‐type intermediates was confirmed by trapping experiments.     

Atom Transfer Radical Polymerization of N,N‐Dimethylacrylamide

Summary: The living polymerization of N,N‐dimethylacrylamide was achieved by atom transfer radical polymerization catalyzed by copper chloride complexed with a new ligand, N,N′‐bis(pyridin‐2‐ylmethyl 3‐hexoxo‐3‐oxopropyl)ethane‐1,2‐diamine (BPED). With methyl 2‐chloropropionate as the initiator, the polymerization reached high conversions (> 90%) at 80 °C and 100 °C, producing polymers with very close to theoretical values and low polydispersity. The ligand, temperature, and copper halide strongly affected the activity and control of the polymerization.

PDMA molecular weight and polydispersity dependence on the DMA conversion in the DMA bulk polymerizations at different temperatures: DMA/CuCl/MCP/BPED = 100/1/1/1, 100 °C (♦, ⋄); 80 °C (▴, ▵); 60 °C (▪, □); and DMA/CuCl/MCP/BPED = 100/1/1/2, 80 °C (•, ○).     

Catalytic Hydrogen Atom Transfer (HAT) for Sustainable and Diastereoselective Radical Reduction

Going cyclic! A catalytic cycle and cyclic transition states enable a novel sustainable and catalytic hydrogen atom transfer (HAT) for highly diastereoselective radical reductions. Readily available nontoxic silanes are the terminal reductants for epoxides that are opened by bifunctional titanocene(III) hydride catalysts.     

Cytocompatible Polymer Grafting from Individual Living Cells by Atom‐Transfer Radical Polymerization

A cytocompatible method of surface‐initiated, activator regenerated by electron transfer, atom transfer radical polymerization (SI‐ARGET ATRP) is developed for engineering cell surfaces with synthetic polymers. Dopamine‐based ATRP initiators are used for both introducing the ATRP initiator onto chemically complex cell surfaces uniformly (by the material‐independent coating property of polydopamine) and protecting the cells from radical attack during polymerization (by the radical‐scavenging property of polydopamine). Synthetic polymers are grafted onto the surface of individual yeast cells without significant loss of cell viability, and the uniform and dense grafting is confirmed by various characterization methods including agglutination assay and cell‐division studies. This work will provide a strategic approach to the generation of living cell–polymer hybrid structures and open the door to their application in multitude of areas, such as sensor technology, catalysis, theranostics, and cell therapy.     

Atom‐Transfer Radical Polymerization of Acrylates in an Ionic Liquid

The atom‐transfer radical polymerization (ATRP) of acrylates in 1‐butyl‐3‐methylimidazolium hexafluorophosphate was investigated. The solubility of the acrylates in the ionic liquid depends on the substituent. The homogeneous polymerization of methyl acrylate gives polymers with M̄_n close to the calculated value and relatively narrow polydispersity. In heterogeneous polymerizations of higher acrylates, with the catalyst present in the ionic liquid phase, deviations from ideal behavior are observed although the polymerization of butyl acrylate approaches the conditions of a controlled polymerization.     

Monomode Microwave‐Assisted Atom Transfer Radical Polymerization

Summary: The first monomode microwave‐assisted atom transfer radical polymerization (ATRP) is reported. The ATRP of methyl methacrylate was successfully performed with microwave heating, which was well controlled and provided almost the same results as experiments with conventional heating, demonstrating the absence of any “microwave effect” in ATRP (in contrast to several literature reports). Furthermore, we found that the main advantage of the microwave‐assisted reactions over conventional reactions, i.e., a significant increase of reaction rates, only had its limited application in ATRP, even in very slow ATRP systems with high targeted molecular weights.

Comparison of the kinetic plots of the ATRP of MMA ([MMA]₀/[EBIB]₀/[CuCl]₀/[NHPMI]₀ = 200:1:1:3, MMA/DMF = 1:1 v/v) carried out at 90 °C in DMF with microwave (▴) and conventional heating (•), respectively.