Solid-State Fermentation for Humic Acids Production by a Trichoderma reesei Strain Using an Oil Palm Empty Fruit Bunch as the Substrate

Empty fruit bunch (EFB), an underutilized waste product of oil palm processing, was studied as a substrate for the production of humic acids (HA) by a Trichoderma reesei strain by solid-state fermentation (SSF) in Raimbault columns. HA have attracted the attention of many investigators due to their applications in agriculture, industry, the environment, and biomedicine. Commercial HA are currently chemically extracted from peat and coal, which are nonrenewable carbon sources. Biotechnological processes are important for their sustainable and controlled production, with SSF being especially promising for mimicking the natural habitat of fungi. Trichoderma sporulation and HA production are related, and the results of this study showed that SSF stimulated fast sporulation. The productivity related to HA was much higher than that of the biomass, indicating an efficient utilization of EFB. These findings, added to the low cost of EFB, make SSF an attractive process for HA production.     

Solid-State Fermentation of <Emphasis Type="Italic">Mortierella isabellina</Emphasis> for Lipid Production from Soybean Hull

Soybean hull, generated from soybean processing, is a lignocellulosic material with limited industrial applications and little market value. This research is exploring a new application of soybean hull to be converted to fungal lipids for biodiesel production through solid-state fermentation. Mortierella isabellina was selected as the oil producer because of its high lipid content at low C/N ratio. Several cultivation factors were investigated, including moisture content, inoculums size, fungal spore age, and nutrient supplements, in an attempt to enhance the lipid production of the solid-state fermentation process. The results showed that lipid production with the increase of the moisture content and the spore age, while decreased as the size of inoculums increased. Nutrients addition (KH₂PO₄ 1.2 mg and MgSO₄ 0.6 mg/g soybean hull) improved the lipid production. The total final lipid reached 47.9 mg lipid from 1 g soybean hull after the conversion, 3.3-fold higher than initial lipid reserve in the soybean hull. The fatty acid profile analysis indicated that fatty acid content consisted of 30.0% of total lipid, and 80.4% of total fatty acid was C16 and C18. Therefore, lipid production from soybean hull is a possible option to enable soybean hull as a new resource for biodiesel production and to enhance the overall oil production from soybeans.     

Chemical characterization of unconventional palm oils from Hyophorbe indica and two other endemic Arecaceae species from Reunion Island

Abstract

Chemical characteristics of novel seed oils, yet not investigated, from three endemic Arecaceae (palm) species from Reunion Island are described. Fatty acid profiles are performed using two-dimensional gas chromatography-mass spectrometry. Carotenoid contents are determined by high performance liquid chromatography-mass spectrometry. The results of the investigations emphasize the particular composition of the unconventional red seed oil from Hyophorbe indica. Characteristic features of this oil reveal a high degree of unsaturation (50% of polyunsaturated fatty acids, with a high content (17%) of omega-3), which is possibly a unique fatty acid composition in the Arecaceae family. The two other palm oils from Dictyosperma album and Latania lontaroides contain high level of saturated fatty acids very similar to that of the edible palm oil. H. indica oil is also very rich in valuable carotenoids; in particular, lutein, β-carotene and lycopene are detected in a high content (respectively 45, 23 and 35?mg.kg^?1 in oil).     

The Effect of Alkaline Addition in Hydrothermal Pretreatment of Empty Fruit Bunches on Enzymatic Hydrolysis Efficiencies

In general, lignocellulosic biomass contains three major components, namely lignin, hemicellulose and cellulose which are the polymers of C5 and C6 sugars. Thus, there is potential to utilize of this biomass for bioethanol production. The hydrolysis of cellulose into glucose was difficult due to the more fibrous nature and thus inhibit enzyme penetration into the cellulose. In order to solve this problem, hydrothermal pretreatment can be used for breaking the bonds within the lignin structure and increase the accessibility of enzyme into the cellulose. In this study, the effect of chemical addition, sodium hydroxide (NaOH) and calcium oxide (CaO) in hydrothermal pretreatment at 180 °C and 30 minutes reaction time of palm oil empty fruit bunches (EFB) on the enzymatic hydrolysis efficiencies was investigated. The enzymatic hydrolysis of hydrothermally pretreated EFB give the highest concentration of glucose at 0.67 g/L while the hydrothermally pretreated of EFB in the presence of NaOH gives the lowest glucose concentration 0.45 g/L.     

Formulation of an Environmentally Friendly Adhesive for Wood

Summary: Malaysia has over 4 million hectares of oil palm plantations that yield large amounts of empty fruit bunches (EFB) generated from palm oil milling operations. These forms of lignocellulosic residue pose an environmental hazard if their disposal is not managed in a systematic manner. One of the useful elements extracted from these EFBs is lignin. The general purpose of this study is to explore the potential uses of lignin extracted from soda black liquor (paper and pulping waste) derived from oil palm empty fruit bunches (EFB) in the formulation of a more environmentally friendly wood adhesive. In this work, the potential for replacing phenol with lignin in phenol formaldehyde resin formulation is examined. The quantity of phenol was reduced by synthesizing the resin at a lignin to phenol ratio of 1:1. The physical and chemical properties of lignin phenol formaldehyde resin (LPF) and commercial phenol formaldehyde resin (CPF) were then compared. The infrared spectrum revealed similarities in the functional groups of both LPF and CPF resins. Tensile strength comparisons between both resins revealed that the LPF resin had a higher bonding strength (11.60 MPa more in term of allowable maximum load). In addition, the kinematics viscosity test showed that the LPF resin had lower kinematic viscosity than the CPF resin after 21 days of storage. Finally, the scanning electron microscope images for both resins showed similarities in terms of penetration into wood vessels.     

Compositional Shift in Fatty Acid Profiles of Lipids Obtained from Oleaginous Yeasts upon the Addition of Essential Oil from <Emphasis Type="Italic">Citrus sinensis</Emphasis> L.

Tailoring lipids from oleaginous yeasts to contain specific types of fatty acid is of considerable interest to food, fuel, and pharmaceutical industries. In this study, the essential oil obtained from Citrus sinesus L. has been used to alter the fatty acid composition of two common oleaginous yeasts, Rhodosporidium toruloides and Cryptococcus curvatus. With increasing levels of essential oil in the medium, the metabolic flux of the fatty acid biosynthesis pathway shifted towards saturated fatty acid production. Essential oil reduced the activities of elongase and ?9 desaturase. This made the lipid obtained from both these yeasts rich in saturated fatty acids. At certain specific concentrations of the essential oil in the medium, the lipid obtained from R. toruloides and C. curvatus cultures was similar to mahuwa butter and palm oil, respectively. Limonene is the major constituents of orange essential oil. Its effect on one of the oleaginous yeasts, R. toruloides, was also studied separately. Effects similar to orange essential oil were obtained with limonene. Thus, we can conclude that limonene in orange essential oil brings about compositional change of microbial lipid produced in this organism.     

Characteristics of cellulose nanofibers isolated from rubberwood and empty fruit bunches of oil palm using chemo-mechanical process

In the present study, chemical-physical properties of nanofibers isolated from rubberwood (Hevea brasiliensis) and empty fruit bunches (EFB) of oil palm (Elaeis guineensis) were analyzed by microscopic, spectroscopic, thermal and X-ray diffraction methods. The isolation was achieved using chemo-mechanical processes. Microscopy study showed that the diameters of the nanofibers isolated from the EFB ranged from 5 to 40 nm while those of the nanofibers isolated from rubberwood had a wider range (10–90 nm). Fourier transform infrared spectroscopy study demonstrated that almost all the lignin and most of the hemicellulose were removed during the chemical treatments. X-ray diffraction analysis revealed that the crystallinity of the studied nanofibers increased after the chemo-mechanical isolation process. The results of thermogravimetric analysis showed that the nanofibers isolated from both sources had higher thermal stability than those of the bleached pulp and untreated fibers.     

Structural characterization of a vegetable oil‐based polyol through liquid chromatography multistage mass spectrometry

A commercial vegetable oil‐based polyol for rigid polyurethane foams has been characterized by liquid chromatography‐electrospray ionization‐quadrupole ion trap mass spectrometry (LC‐ESI‐QIT‐MS). The absolute molecular weight (MW = 960) was measured by gel permeation chromatography (GPC) equipped with both refractive index (RI) detector and static laser light‐scattering detector (SLSD), which allowed further analysis by LC‐MS. The oligo‐polyol mixture was first separated in two elutes and then investigated by a deep multistage mass spectrometry (MSⁿ) study and completed using NMR. The major constituents identified were regioisomers of propoxylated sucrose (n_PO = 6–12), and the related esters of C16:0, C18:1, and C18:2 fatty acids had a mass ratio of 6:3:1. A comparison of fatty acids composition between the sample and palm oil demonstrated that the sample was initially prepared from the mixture of sucrose and palm oil by direct propoxylation. The MSⁿ fragmentation studies validated the structure of propoxylated sucrose and the related fatty acids derivatives. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 255–262     

Cloning and expression of full-lengthTrichoderma reesi cellobiohydrolase I cDNAs inEscherichia coli

The process of converting lignocellulosic biomass to ethanol via fermentation depends on developing economic sources of cellulases.Trichoderma reesei cellobiohydrolase (CBH) I is a key enzyme in the fungal cellulase system; however, specific process application requirements make modification of the enzyme by site-directed mutagenesis (SDM) an attractive goal. To undertake SDM investigations, an efficient, cellulase-free host is required. To test the potential ofEscherichia coli as a host, T.reesei CBH I cDNA was expressed inE. coli strain GI 724 as a C-terminal fusion to thermostable thioredoxin protein. Full-length expression of CBH I was subsequently verified by molecular weight, Western blot analysis, and activity on soluble substrates.

     

Lipids of <Emphasis Type="Italic">Oenothera</Emphasis> seeds from different habitats. 1

The composition of lipids and fatty acids from seeds of Oenothera biennis growing in the RF near Kazan’ was determined. The content of γ-linolenic acid in all groups of acyl-containing lipids in the oil to be 4.4%. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 430–433, September–October, 2007.     

Seed Oil Fatty Acids of Mongolian Compositae: The trans‐Fatty Acids of Heteropappus hispidus,Asterothamnus centrali‐asiaticus and Artemisia palustris

Seed oils from the Compositae plant family are known to contain a variety of unusual fatty acids. Subsequent to the recent discovery of γ‐linolenic acid in Saussurea and Youngia, further Mongolian Compositae species were investigated for their seed oil fatty acid composition. A number of δ3trans‐fatty acids (16 : 1δ3t, 18 : 1δ3t and 18 : 3δ3t, 9c, 12c) were found in the seed oils of Heteropappus hispidus and Asterothamnus centrali‐asiaticus. The latter fatty acid, but not the trans‐monoenes, was also found in one species of Artemisia. These unusual fatty acid isomers were characterized by capillary gas‐liquid chromatographic (GLC) separations in combination with other chromatographic techniques (analytical thin layer chromatography, TLC and preparative argentation TLC), and infrared spectrocsopy (IR). Their identity was further confirmed by co‐chromatography with other seed oils known to contain these trans‐fatty acids. The fact that within the Compositae plant family there are apparently two or three distinct groups of genera containing δ3trans‐fatty acids is discussed.     

Screening genus Penicillium for producers of cellulolytic and xylanolytic enzymes

For enzymatic hydrolysis of lignocellulosic material, cellulolytic enzymes from Trichoderma reesei are most commently used, but, there is a need for more efficient enzyme cocktails. In this study, the production of cellulolytic and xylanolytic enzymes was investigated in 12 filamento us fungi from genus Penicillium and compared with that of T. reesei. Either Solka-Floc cellulose or oat spelt xylan was used as carbon source in shake flask cultivations. All the fungi investigated showed coinduction of cellulolytic and xylanolytic enzymes during growth on cellulose as well as on xylan. The highest filter paper activity was measured after cultivation of Penicillium brasilianum IBT 20888 on cellulose.     

Industrial Waste Utilization for Low-Cost Production of Raw Material Oil Through Microbial Fermentation

In view of ever-growing demand of biodiesel, there is an urgent need to look for inexpensive and promising renewable raw material oils for its production. In this context, the aim of this study was to evaluate the potential use of industrial wastes for low-cost production of oils through microbial fermentation. Among the strains tested, Yarrowia lipolytica grew best and produced highest lipid when grown on decanter effluent from palm oil mill. When crude glycerol by-product from a biodiesel plant was added into the effluent as a co-substrate, Y. lipolytica produced a higher biomass of 3.21 g/L and a higher amount of lipid of 2.21 g/L which was 68 % of the dry weight. The scale up and process improvement in a 5-L bioreactor increased the biomass and lipid up to 5.53 and 2.81 g/L, respectively. A semi-continuous mode of operation was an effective mode for biomass enhancement while a fed-batch mode was effective for lipid enhancement. These yeast lipids have potential to be used as biodiesel feedstocks because of their similar fatty acid composition to that of plant oil.     

Utilization of agro-resources by radiation treatment -production of animal feed and mushroom from oil palm wastes

The production of animal feeds and mushrooms from oil palm cellulosic wasres by radiation and fermentation has been investigated in order to utilize the agro-resources and to reduce the smoke pollution. The process is as follows: decontamination of microorganisms in fermentation media of empty fruit bunch of oil palm (EFB) by irradiation, inoculation of useful fungi, and subsequently production of proteins and edible mushrooms. The dose of 25 kGy was required for the sterilization of contaminating bacteria whereas the dose of 10 kGy was enough to eliminate the fungi. Among many kinds of fungi tested, C. cinereus and P. sajor-caju were selected as the most suitable microorganism for the fermentation of EFB. The protein content of the product increased to 13 % and the crude fiber content decreased to 20% after 30 days of incubation with C. cinereus at 30°C in solid state fermentation. P. sajor-caju was suitable for the mushroom production on EFB with rice bran.     

Isolation,Identification and High-Throughput Screening of Neutral Lipid Producing Indigenous Microalgae from South African Aquatic Habitats

Exploring indigenous microalgae capable of producing significant amounts of neutral lipids through high-throughput screening is crucial for sustainable biodiesel production. In this study, 31 indigenous microalgal strains were isolated from diverse aquatic habitats in KwaZulu-Natal, South Africa. Eight superior lipid-producing strains were selected for further analysis, based on Nile red fluorescence microscopy screening. The microalgal isolates were identified to belong to the genera Chlorella, Neochloris and Chlamydomonas via morpho-taxonomic and molecular approach by 18S rRNA gene sequencing. Chlorella vulgaris PH2 had the highest specific growth rate (μ) and lowest doubling time of 0.24 day⁻¹ and 2.89 ± 0.05 day⁻¹, respectively. Chlorella vulgaris T4 had the highest biomass productivity of 35.71 ± 0.03 mg L⁻¹day⁻¹. Chlorella vulgaris PH2 had the highest lipid content of 34.28 ± 0.47 and 38 ± 9.2% (dcw) as determined by gravimetric analysis and the sulfo-phospho-vanillin (SPV) method, respectively. Chlorella vulgaris PH2 exhibited a high content of saturated fatty acids, while Chlorella sp. T4 exhibited a high total content of saturated and monounsaturated fatty acids with a low content of polyunsaturated fatty acids. The preponderance of neutral lipids suggests that Chlorella sp. T4 is a suitable candidate for biomass feedstock for biodiesel production.

     

Probing the role of N-linked glycans in the stability and activity of fungal cellobiohydrolases by mutational analysis

The filamentous fungi Trichoderma reesei and Penicillium funiculosum produce highly effective enzyme mixtures that degrade the cellulose and hemicellulose components of plant cell walls. Many fungal species produce a glycoside hydrolase family 7 (Cel7A) cellobiohydrolase, a class of enzymes that catalytically process from the reducing end of cellulose. A direct amino acid comparison of these two enzymes shows that they not only have high amino acid homology, but also contain analogous N-linked glycosylation sites on the catalytic domain. We have previously shown (Jeoh et al. in Biotechnol Biofuels, 1:10, 2008) that expression of T. reesei cellobiohydrolase I in a commonly used industrial expression host, Aspergillus niger var. awamori, results in an increase in the amount of N-linked glycosylation of the enzyme, which negatively affects crystalline cellulose degradation activity as well as thermal stability. This complementary study examines the significance of individual N-linked glycans on the surface of the catalytic domain of Cel7A cellobiohydrolases from T. reesei and P. funiculosum by genetically adding or removing N-linked glycosylation motifs using site directed mutagenesis. Modified enzymes, expressed in A. niger var. awamori, were tested for activity and thermal stability. It was concluded that N-linked glycans in peptide loops that form part of the active site tunnel have the greatest impact on both thermal stability and enzymatic activity on crystalline cellulose for both the T. reesei and P. funiculosum Cel7A enzymes. Specifically, for the Cel7A T. reesei enzyme expressed in A. niger var. awamori, removal of the N384 glycosylation site yields a mutant with 70% greater activity after 120 h compared to the heterologously expressed wild type T. reesei enzyme. In addition, similar activity improvements were found to be associated with the addition of a new glycosylation motif at N194 in P. funiculosum. This mutant also exhibits 70% greater activity after 120 h compared to the wild type P. funiculosum enzyme expressed in A. niger var. awamori. Overall, this study demonstrates that “tuning” enzyme glycosylation for expression from heterologous expression hosts is essential for generating engineered enzymes with optimal stability and activity.     

Lipid classes of in vitro cultivar of Pakistani citrus

The in vitro cultivar of citrus contained 18.0% lipids after 12 weeks of germination of seed. The lipid was analyzed by GC procedure for its fatty acid composition. The oil contained seven major fatty acid constituents which were later identified by GC. The oil was further analyzed for its classes by means of thin layer chromatography and gas chromatography. The major portion of the lipid classes comprised of neutral lipids (93.9%) and polar lipids (6.1%). The identified neutral lipids comprised of hydrocarbon (1.4%), wax esters (1.5%), sterol esters (5.2%), triglycerides (52.3%), free fatty acids (1.3%), 1,3-diglycerides (6.0%), 1,2-diglycerides (5.0%), glycol (15.2%), sterols (6.0%), 2-monoglycerides (6.4%), 1-monoglycerides (5.3%) and the identified polar lipids comprised of phosphatidyl ethanolamine (1.8%) phosphatidyl choline (0.9%) lysophosphatidyl ethanolamine (1.8%) and phosphatidyl inositol (1.1%).     

Analysis of free fatty acids by a micro-liquid chromatograph directly coupled with a mass spectrometer through a vacuum nebulizing interface

A liquid chromatograph directly coupled with a quadrupole mass spectrometer through a vacuum nebulizing interface was applied to the analysis of various free fatty acids. Chemical ionization mass spectra of the C₇? C₂₂ free fatty acids were first examined using either methanol or benzene as the reagents. Then the practical compositional analysis of the fatty acids were performed with various biological samples such as bean oil, rape oil, palm oil and milk fat where most of the fatty acids are included as their triglycerides.     

Influence of operating conditions and vessel size on oxygen transfer during cellulase production

The production of low-cost cellulase enzyme is a key step in the development of an enzymatic-based process for conversion of lignocellulosic biomass to ethanol. Although abundant information is available on cellulase production, little of this work has examined oxygen transfer. We investigated oxygen transfer during the growth of Trichoderma reesei, a cellulase-producing microorganism, on soluble and insoluble substrates in vessel sizes from 7 to 9000 L. Oxygen uptake rates and volumetric mass transfer coefficients (k _La) were determined using mass spectroscopy to measure off gas composition. Experimentally measured k _La values were found to compare favorably with a k _La correlation available in the literature for a non-Newtonian fermentation broth during the period of heavy cell growth.     

Chromatographic Analysis for Fatty Acids and Lipid-Soluble Bioactives of Derris indica Crude Seed Oil

A combination of column chromatography (CC), gas chromatography (GC), thin layer chromatography (TLC) and liquid chromatography (LC) techniques were performed to analyze lipid classes, fatty acids and fat-soluble bioactives of Derris indica crude seed oil. Hexane extract of Derris indica oilseeds was found to be 56%. Level of neutral lipids in the crude seed oil was the highest, followed by glycolipids and phospholipids, respectively. Linoleic followed by α-linolenic, palmitic and oleic were the major fatty acids in the crude seed oil. The ratio of unsaturated fatty acids to saturated fatty acids was higher in neutral lipid classes than in the polar lipid fractions. The oil was characterized by a relatively high amount of phytosterols, wherein the sterol markers were β-sitosterol, campesterol and stigmasterol. γ-Tocopherol was the major tocopherol while the rest being α-tocopherol. In consideration of potential utilization, detailed knowledge on the composition of Derris indica oil is of major importance.