激光烧蚀Al+与乙醇团簇的反应研究

利用激光烧蚀-分子束法对Al等离子体与乙醇团簇的反应进行了研究.飞行时间质谱测得的主要反应产物有Al⁺(C₂H₅OH)_n (n=3～10)与H⁺(C₂H₅OH)_n (n=1～14)团簇正离子和(C₂H₅OH)_n(H₂O)OH^- (n=0～8)团簇负离子.实验发现,烧蚀产生的Al等离子体与脉冲分子束的不同位置反应,对团簇离子的类别、大小及强度分布均产生很大影响.Al等离子体与脉冲分子束的前段反应,主要产生金属-复合物团簇离子Al⁺(C₂H₅OH)_n,且信号较强;Al等离子体与脉冲分子束的中段及后段反应,主要产生质子化团簇离子H⁺(C₂H₅OH)_n和团簇负离子(C₂H₅OH)_n(H₂O)OH^-,同时还出现强度较小的其他水合团簇离子,如H⁺(H₂O)m(C₂H₅OH)_n (m=1～2)等.     

三种不同碳桥联双核茂钛配合物的合成及催化乙烯聚合研究

合成了3种不同结构的CnH₂n桥联双核茂钛配合物(CH₃)₂C[(C₅H₄)TiCl₂(C₅H₅)]₂(3),(CH₂)_n[(C₅H₄)TiCl₂(C₅H₅)]₂(6,n=3;7,n=4),并用1HNMR进行了表征.发现以甲苯为溶剂时,不仅提高了产率,而且有效地避免了副产物Cp₂TiCl₂的生成.研究了化合物7/MAO(甲基铝氧烷)催化乙烯聚合的反应,考察了反应条件对催化体系的影响.结果表明,催化活性随着n(Al)/n(Cat.)比的增大而提高,聚乙烯的分子量在n(Al)/n(Cat.)=500和50℃时达到最高值9.0102×10⁴;随着聚合时间的延长,催化活性下降,而产物分子量不断升高;随着温度的上升,50℃时催化活性和聚乙烯的分子量最高,分别为2.4074×10⁵gPE/(molTi·h)和6.8679×10⁴.随着桥联双核茂钛配合物碳桥的增长,催化活性增加,所得聚乙烯的分子量降低.     

二(β-羟亚胺)二氯化钛配合物的合成及催化乙烯聚合

报道了3个β-羟亚胺配体(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂CH(Ph)OH(1a), (2,6-^emPr₂C₆H₃)N＝C·(Ph)CH₂C(Ph)₂OH(1b)和(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂C(C₁₂H₈)OH(1c)及其二(β-羟亚胺)二氯化钛配合物[(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂CH(Ph)O]₂TiCl₂(2a), [(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂C(Ph)₂O]₂·TiCl₂(2b)和[(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂C(C₁₂H₈)O]₂TiCl₂(2c)的合成, 并对其结构进行了表征. 在助催化剂甲基铝氧烷(MAO)作用下, 以化合物2b为主催化剂, 研究了Al/Ti摩尔比、 反应时间、 温度和聚合压力等对乙烯聚合的影响, 发现该催化体系在较宽的反应条件下均可得到很高分子量的聚乙烯, 熔点均在140℃左右. 以化合物2a~2c为主催化剂对乙烯进行催化聚合, 发现在β碳位上取代基的立体位阻对催化剂活性有很大影响. 当化合物2b上引入2个苯基取代基时, 催化剂显示出最佳催化活性.     

咔唑及其衍生物的质谱研究

本文报道咔唑和十三个N-取代咔唑衍生物(R=CH₃,C₂H₅,n-C₃H₇,n-C₄H₉,n-C₅H₁₁,n-C₆H₁₃,n-C₇H₁₅,CH₂CH₂Cl,CH₂CH₂Br,CH(CH₃)₂,CH=CH₂,CH₂CH=CH₂和CH₂C₆H₅)的质谱裂解过程。结果表明:1.这些化合物都显示分子离子峰,它们的相对丰度似有随R链的增长而减弱的趋势;2.当R为碳原子数大于1的直链烷基时,各化合物的质谱中都有相同的、以m/z180和m/z167为母离子的两个碎片离子系列,即m/z180;152,127,90和m/z167,166,140,139,115,113;3.当R为乙烯基时,重排断裂是主要途径;而R为烯丙基时,断裂方式与直链烷基衍生物的相同,但α-断裂是主要的;4.R为CH₂CH₂Cl和CH₂CH₂Br时,β-断裂也有一定几率;R为CH₂C₆H₅时,主要的断裂过程是产生m/z91的(艹卓)鎓离子。     

新型金属-双二硫杂戊烯(M-BDT)配合物的合成、表征及X射线的指标化

合成了4个新型NiBDT配位化合物,BDT为具有9个S原子的杂戊烯.元素分析、IR谱、UV谱确定这4个新配合物的化学式分别为[(CH₃)₄N]₂[Ni(C₅S₉)₂](1),[(C₂H₅)₄N]₂·[Ni(C₅S₉)₂](2),[(C₄H₉)₄N]₂[Ni(C₅S₉)₂](3),[(C₆H₅)(CH₃)₃N]₂[Ni(C₅S₉)₂](4).采用Ito法对配合物1的X射线粉末图进行了指标化,确定该晶体属单斜晶系,简单晶格,晶胞参数:a=0.680nm,b=0.714nm,c=2.302nm,γ=111.4°,Z=2.     

新型双苯并环己酮芳亚胺镍(Ⅱ)催化降冰片烯与甲基丙烯酸丁酯共聚合

采用自制的新型双苯并环己酮芳亚胺镍催化剂双苯并环己酮-2,6-二甲基苯亚胺镍(Ⅱ)(Ni{C₁₀H₈(O)C[2,6-C₆H₃(CH₃)₂N]CH₃}₂, C1)和双苯并环己酮-2,6-二氯苯亚胺镍(Ⅱ)(Ni{C₁₀H₈(O)C[2,6-C₆H₃Cl₂N]CH₃}₂, C2)与三五氟苯硼[B(C₆F₅)₃]结合, 在一定的反应条件下可高效催化降冰片烯(NB)与甲基丙烯酸正丁酯(n-BMA)的乙烯基加成共聚合. 提出了催化聚合时存在的可能失活机理; 研究了不同单体投料比对催化活性、 产率及产物性能的影响. 根据Kelen-Tüdõs方法分别估算出2种单体在不同催化体系下的竞聚率, 即当催化体系为C1/B(C₆F₅)₃时, 竞聚率r_n-BMA=0.02, r_NB=16.28, r_NB·r_n-BMA=0.32; 当催化体系为C2/B(C₆F₅)₃时, r_n-BMA=0.01, r_NB=64.83, r_NB·r_n-BMA=0.65. 结果表明, 2种单体在2种体系催化下均为无规共聚合.     

系列Ln(Ⅲ)配位聚合物(Ln=Eu,Sm,Tb,Pr,Gd)的合成及其荧光分析

采用水热法合成了4个具有1D结构的Ln(Ⅲ)配位聚合物,[Eu₂(C₉H₇O₂)₆(C₉H₇O₂H)(C₂H₅OH)]n(1)、[Sm(C₉H₇O₂)₃]n(2)、[Tb(C₉H₇O₂)₃]n(3)和[Gd(C₉H₇O₂)₃]n(4)(C₉H₈O₂=肉桂酸)。 通过X射线单晶衍射确定了它们的结构。 这4个Ln(Ⅲ)配合物中,Ln(Ⅲ)的配位数均为9,桥配体均为肉桂酸根,但其配位方式有差异。 对配合物进行了IR、UV-Vis-NIR和荧光光谱等表征。 分析了各配合物的荧光发射,结果表明,在可见区,配合物1发射较明显的红光,配合物2、3发射绿光,配合物4发射蓝光,但很弱。 讨论了具有刚柔相混杂性质的肉桂酸配体对配位聚合物的构筑及稀土离子发光的影响。     

新型含硅表面活性剂的合成及性能研究

含有双胺基的三硅氧烷中的伯胺基与D-葡萄糖酸-δ-内酯进行酰胺化,仲胺基与低聚乙二醇甲醚缩水甘油醚、二缩水甘油醚进行烷基化,制备了新型含硅表面活性剂Me₃SiOSiMeR¹OSiMe₃ [R¹=(CH₂)₃NR²(CH₂)₂NHCO(CHOH)₄CH₂OH; R²=H, CH₂CH(OH)CH₂O(CH₂CH₂O)_xCH₃, x=1, 2, 3] (1a, 2a～2c)和(CH₂OCH₂)_y(Me₃SiOSiMeR³OSiMe₃)₂ [R³=(CH₂)₃NR⁴～(CH₂)₂NHCO(CHOH)₄CH₂OH; R⁴=CH₂CH(OH)CH₂OCH₂, y=0, 1, 2] (3a～3c).这些化合物的结构用¹H, ¹³C核磁共振仪和元素分析仪进行鉴定.研究了这些新型含硅表面活性剂的界面性能,在浓度分别为10^-4和10^-5 mol·L^-1时可以将水的表面张力降低至约21 mN·m^-1.     

两个含N-皮考林酰肼铁配合物的合成和结构表征

合成了含N-乙酰皮考林酰肼(简写为Haphz)的铁配合物[Fe₂(aphz)₂(μ-CH₃O)₂Cl₂]·CH₃OH(1,C₁₉H₂₆Cl₂Fe₂N₆O₇,Mr=633.06)和含N-苯甲酰皮考林酰肼(简写为Hphphz)的铁配合物Fe(phphz)Cl₂(2,C₁₃H₁₀Cl₂FeN₃O₂,Mr=366.99).2个配合物均属三斜晶系,空间群为P     

甲基化戊二烯的质谱研究

本文报道了CH₃CH=C(CH₃)CH=CH₂(1)、CH₃C(CH,)=CHCH=CH₂(2)、CH₃CH=C(CH₃)C(CH₃)=CH₂(3)、CH₃C(CH₃)=CHC(CH₃)=CH₂(4)、CH₃C(CH₃)=C(CH₃)C(CH₃)=CH₂(5)和CH₃CH=CHCH=CH₂(6)的质谱,对其中的(1)、(3)、(5)化合物做了亚稳和高分辨测定,阐述了它们的断裂规律,提出了断裂机理。     

添加剂对TiO2/水分散体流变性的影响

研究了TiO₂生产中有关助剂对其流变性能的影响,得到了TiO₂/水分散体的流变性能与三乙醇胺用量之间的关系,并找到了最佳用量.实验发现,六偏磷酸钠为分散剂时,其使用效果有时间依赖性;碳酸铵作絮凝剂时则对分散体的流变性能和形成的絮凝体有影响.     

Synthesis,Structures and Properties of Three New Compounds Based on Multidentate Ligand Containing Triazole and Pyrimidine

Three new compounds, namely, [Zn(mtpo)₂(H₂O)4](1), [Cd(mtpo)₂·CH₃CH₂OH]_n(2) and [Mn(mtpo)₂·CH₃CH₂OH]_n(3)(Hmtpo=4,7-dihydro-5-methyl-7-oxo-[1,2,4]triazolo[1,5-a]pyrimidine), have been synthesized via hydrothermal or solvothermal methods and characterized by means of elemental analyses, Fourier transform infrared(FTIR) spectroscopy, powder X-ray diffraction(PXRD), thermogravimetric analysis(TGA) and single-crystal X-ray diffraction. The results obtained from the single-crystal X-ray diffraction indicate that compound 1 has a mononuclear structure, and crystallizes in a monoclinic crystal system with P2₁/c space group, which exhibits a 2D supramolecular network constructed by hydrogen bonds and π-π interactions. Compounds 2 and 3 are isomorphous and crystallize in a tetragonal system with space group of I4₁/a. The M²⁺(M=Cd, Mn) ions in compounds 2 and 3 have the octahedral coordination geometry. Hmtpo acts as a bridging ligand linking the metal ions to form an infinite 3D framework with 4-connected {4²·8⁴} topology. There are hydrogen bonds between the guest ethanol molecules and the mtpoligands, which make the ethanol molecules exist in a 3D framework. In addition, luminescent properties of compounds 1 and 2 as well as magnetic property of compound 3 were investigated and water vapor adsorption and nitrogen sorption for compounds 2 and 3 were researched at 298 and 77 K, respectively.     

Structural tuning of coordination polymers by 4-connecting metal node and secondary building process

Due to variation in ligand's conformation, metal node's connecting geometry, and secondary building process by anions, bat-like, dumbell-like, diamondoid, or pillar-layer topologies are achieved.     

醇添加对钴基催化剂费托合成反应的影响

在固定床微反应器上利用全产物在线分析方法, 研究了钴基催化剂上伯醇C_nH_2n+1OH (n=2, 3, 5, 6)在惰性气氛(Ar)和氢气气氛下的反应行为以及添加C_nH_2n+1OH对费托(FT)合成反应的影响, 并结合原位漫反射傅里叶变换红外光谱(DRIFTS)表征. 结果表明: 碳数为n的醇在Ar 气氛和H₂气氛下反应主要有脱羰和脱水两条反应路径, 分别生成碳数为n-1的烃和相同碳数的烃. 低碳数醇(乙醇和正丙醇)的添加对费托合成产物分布无明显影响; 而较高碳数的醇(正戊醇, 正己醇)的加入使碳数为n-1以上烃的选择性显著增加, 这是由于C_nH_2n+1OH加入后生成的碳数为n-1和n的中间体可进一步发生链引发反应, 生成更多的长链烃.     

Studies on the Halogen Substituted β-Amino Acids and Their Cu(Ⅱ) Coordination Complexes in Crystallography

Halogen substituted β-amino acids, D,L-3-amino-3-(4-fluoro)phenylpropionic acid(D,L-HL1, 1) and D,L-3-amino-3-(4-bromo)phenylpropionic acid(D,L-HL2, 2), as well as their Cu(Ⅱ) coordination complexes[Cu(L1)₂(CH₃OH)₂]·2CH₃OH(3) and[Cu(L2)₂(CH₃OH)₂]·2CH₃OH(4) were investigated and their single crystal structures were discussed in details. Supramolecular helical chains were found in β-amino acids 1 and 2 while there was no helix in their coordination complexes 3 and 4. The formation of supramolecular helixes could be due to the hydrogen bonds between terminal-NH³⁺ and adjacent-COO^- in β-amino acids 1 and 2. While, this kind of hydrogen bonds could not be observed in their Cu(Ⅱ) coordination complexes 3 and 4, in which central-symmetrical dimers could be formed via coplanar coordinated bonds(N-Cu-O) between-NH₂ and-COO^-.     

Synthesis of Tc(IV) alcoholato complexes with methanol, ethyleneglycol and 1,2,4-butanetriol

The preparation of three Tc(IV) alcoholato complexes: K₂[⁹⁹Tc(OMe)₆], K₂[⁹⁹Tc(glyc)₃·3C₂H₅OH (H₂glyc = CH₂OHCH₂OH), and K₂[⁹⁹Tc(butri)₂]·CH₃OH (H₃butri = CH₂OHCHOHCH₂CH₂OH) is described.     

Synthesis, characterization of new Rh---Co mixed-metal clusters and reactions of clusters containing [Rh2Co2C2] core with 1-alkynes and/or carbon monoxide

Six new cluster derivatives [Rh₂Co₂(CO)₆(μ-CO)₄(μ₄,η²-HCCR)] (R=FeCp₂ 1, CH₂OH 2, (CH₃O)C₁₀H₆CH(CH₃)COOCH₂CCH 3) and [RhCo₃(CO)₆(μ-CO)₄(μ₄,η²-HCCR)] (R=FeCp₂ 4, CH₂OH 5, (CH₃O)C₁₀H₆CH(CH₃)COOCH₂CCH 6) were obtained by the reactions of [Rh₂Co₂(CO)₁₂] and [RhCo₃(CO)₁₂] with substituted 1-alkyne ligands HCCR [R=FeCp₂ 7, CH₂OH 8, (CH₃O)C₁₀H₆CH(CH₃) COOCH₂CCH 9] in n-hexane at room temperature, respectively. Alkynes insert into the Co---Co bond of the tetranuclear clusters to give butterfly clusters. [Rh₂Co₂(CO)₆(μ-CO)₄(μ₄,η²-HCCFeCp₂)] (1) was characterized by a single-crystal X-ray diffraction analysis. Reactions of 1, 2 with 7, 8 and ambient pressure of carbon monoxide at 25 °C gave two known cluster complexes [Co₂(CO)₆(μ₂, η²-HCCR)] (R=FeCp₂ 10, CH₂OH 11), respectively. All clusters were characterized by element analysis, IR and ¹H-NMR spectroscopy.     

Catalytic activity of manganese(III)-oxazoline complexes in urea hydrogen peroxide epoxidation of olefins: The effect of axial ligands

The catalytic activity of two manganese(III)-oxazoline complexes [Mn(phox)₂(CH₃OH)₂]ClO₄ and Mn(phox)₃ (Hphox = 2-(2′-hydroxylphenyl)oxazoline), was studied in the epoxidation of various olefins. All of epoxidation reactions were carried out in (1:1) mixture of methanol:dichloromethane at room temperature using urea hydrogen peroxide (UHP) as oxidant and imidazole as co-catalyst. The epoxide yields clearly demonstrate the influence of steric and electronic properties of olefins, the catalysts and nitrogenous bases as axial ligand. [Mn(phox)₂(CH₃OH)₂]ClO₄ catalyst with low steric properties has higher catalytic activity than Mn(phox)₃. The highest epoxide yield (95%) was achieved for indene at the presence of [Mn(phox)₂(CH₃OH)₂]ClO₄ within 5 min. The proximal and distal interactions of strong π-donor axial ligands such as imidazole with the active intermediate are efficiently increased activity of the catalytic system.     

The excess molar volumes of (an alkanol + a branched chain ether) at the temperature 298.15 K and the application of the ERAS model

The excess molar volumes V_m^E {x(CH₃OH or CH₃CH₂OH or CH₃(CH₂)₂OH or CH₃CH(OH)CH₃ + (1 - x){CH₃(CH₂)₂}₂O or CH₃C(CH₃)₂OCH₃ or CH₃CH₂C(CH₃)₂OCH₃} have been calculated from measured values of density over the whole composition range at the temperature 298.15 K in order to investigate OH … O specific interactions. The results are explained in terms of the strong self-association of the alkanols, the specific interaction between the alkanol, and the ether molecules and packing effects upon mixing. The experimental V_m^h results presented here, together with the previously reported data for the molar excess enthalpy H_m^E, has been used to test the Extended Real Associated Solution (ERAS) model.     

一例对二硫化碳具有荧光传感性能的Mg-金属有机框架化合物

通过溶剂热合成了一例Mg-MOF化合物[Mg₄(1,4-NDC)₄(DMA)₂(CH₃OH)₂(H₂O)₂]·DMA·CH₃OH(1,1,4-H₂NDC=1,4-萘二酸,DMA=N,N'-二甲基乙酰胺),并对其结构表征及荧光性能进行了研究。 单晶X射线研究结果表明,化合物结晶于P2₁/c空间群,其晶体学数据为a=2.06090(12) nm, b=2.21014(13) nm, c=1.50385(10) nm, β=111.399(3)°, V=6.3776(7) nm³, Z=4, D_c=1.403 g/cm³, F(000)=2824, R=0.0596, wR=0.1225(I>2σ(I))。 化合物1中,二核的镁作为次级构筑单元通过桥连配体1,4-NDC连接形成沿c轴方向拓展的一维链。 一维链间进一步通过配体连接形成3D框架的化合物。 荧光性能研究表明,化合物1对CS₂具有灵敏的荧光传感性能,在0.4%的体积分数条件下可引起CS₂荧光的完全淬灭。 此外,化合物1的热稳定性也通过热重分析进行了研究,发现其可稳定到140 ℃左右。