Chelation-controlled asymmetric aminohalogenation reaction

The chelation-controlled asymmetric aminohalogenation of α,β-unsaturated 3-aryl-N-acyl-N-4-phenyl-2-oxazolidinones have been established by using palladium(II) acetate as the catalyst and as the chelation metal. The reaction is very convenient to perform by simply mixing the three reactants, cinnamates, N,N-dichloro-p-toluenesulfonamide and catalyst together with 4 Å molecular sieves at rt in any convenient vial of appropriate size without special protection from inert gases. Unlike the previous asymmetric aminohalogenation, the ionic liquid, [BMIM][NTf₂], was found to be superior to [BMIM][BF₄] as the reaction media. It was also found that palladium(II) acetate has to be used together with 1 equiv of MeCN to achieve the opposite chelation control. The resulting absolute stereochemistry of the product was unambiguously determined by X-ray structural analysis.     

cis-Palladium(II) complexes of derivatives of di-(2-pyridyl)methane: Study of the influence of the bridge group in the coordination mode

Palladium(II) complexes containing di-(2-pyridyl)-N-methylimine (1), di-(2-pyridyl)methanol (2) and di-(2-pyridyl)methyl-N,N-diethyldithiocarbamate (4) ligands were synthesized and characterized by ¹H and ¹³C NMR in solution, IR and X-ray single crystal diffraction. Crystal structures of cis-dichloro[di-(2-pyridyl)-N-methylimine]palladium(II) (5), cis-dichloro[di-(2-pyridyl)methanol]palladium(II) (6) and cis-dichloro[di-(2-pyridyl)methyl-N,N-diethyldithiocarbamate]palladium(II) (7) showed a bidentate coordination mode of the di-(2-pyridyl)methane derivatives 1, 2 and 4. In these complexes is observed the formation of a five-membered chelate ring with the iminic ligand 1 and six-membered chelate rings with the pyridinic ligands 2 and 4. In all complexes the palladium atom displays a distorted square planar geometry.     

Synthesis and molecular structures of (2-dialkylaminophenyl)alcohols and of 2-phenylaminoalkyl-dimethylaminobenzene derivatives

N,N-Dimethyl-o-toluidine, N,N-dimethylaniline, and N,N-diethylaniline were treated with n-butyllithium-tmeda in diethyl ether-hexane solution to give o-lithioarylamines, which react with various electrophiles (benzophenone, dicyclohexyl ketone, benzaldehyde, and Ph(H)CNPh) to form the corresponding (2-dialkylaminophenyl)alcohols 1-HOCPh₂-2-NMe₂C₆H₄ (1), 1-HOCCy₂-2-NMe₂C₆H₄ (2), 1-HOCPh₂CH₂-2-NMe₂C₆H₄ (4), 1-HOC(H)PhCH₂-2-NMe₂C₆H₄ (6), and 1-HOCPh₂-2-NEt₂C₆H₄ (7), and the 2-phenylaminoalkyl-dimethylaminobenzene derivatives 1-NMe₂-2-NH(Ph)C(H)PhC₆H₄ (3) and 1-NMe₂-2-NH(Ph)C(H)PhCH₂C₆H₄ (5). Compounds 1-7 were characterized spectroscopically (NMR, IR, MS) and by crystal structure determination.     

Five-membered ring chelate complexes of Ni(II), Pd(II) and Pt(II) derived of di-(2-pyridyl)-N-ethylimine

Cis-diaquobis{di-(2-pyridyl)-N-ethylimine}nickel(II) chloride (2) was obtained from the reaction of di-(2-pyridyl)-N-ethylimine (1) and [NiCl₂dppe] [dppe = cis-1,2-bis(diphenylphosphino)ethylene] in a 2:1 ratio in hot acetonitrile. Cis-dichloro{di-(2-pyridyl)-N-ethylimine}palladium(II) (3) and cis-dichloro{di-(2-pyridyl)-N-ethylimine}platinum(II) (4) complexes were obtained from the reaction of MCl₂ (M = Pd, Pt) and (1) in equimolar ratio in hot acetonitrile. Compounds 1–4 were characterized by IR spectroscopy, elemental analysis, and mass spectrometry; the complexes 3 and 4 were characterized in solution by NMR. In addition, solid state structures of compounds 1–4 were determined using single crystal X-ray diffraction analyses. X-ray diffraction data of the complexes 3 and 4 showed a distorted square planar local geometry at palladium and platinum atoms with the chlorine atoms in a cis-coordination; in 2 a local octahedral geometry at nickel atom was observed. Complexes 3 and 4 are arranged as dimers with a M?M distance of 3.4567(4) Å (M = Pd) and 3.4221(4) Å (M = Pt), respectively; 2 consists of units linked by intermolecular hydrogen bonding.     

New dinuclear palladium complex with a Chinese-lantern structure

The new dinuclear palladium complex Pd₂(-S,N-SC₇H₅N₂)₄ with a Chinese-lantern structure was synthesized by the reaction of K₂PdCl₄ with 2-mercaptobenzimidazole and structurally characterized by X-ray diffraction analysis.     

Palladium(II) complexes with R2edda-derived ligands

Four palladium(II) complexes with R₂edda ligands, dichlorido(O,O′-dialkylethylenediamine-N,N′-diacetate)palladium(II) monohydrates, [PdCl₂(R₂edda)]?H₂O, R = Me, Et, n-Pr, i-Bu, and the new ligand precursor i-Bu₂edda?2HCl?H₂O, O,O′-diisobutylethylenediamine-N,N′-diacetate dihydrochloride monohydrate, were synthesized and characterized by IR, ¹H and ¹³C NMR spectroscopy, and elemental analysis. DFT calculations were performed for the palladium(II) complexes and a high possibility for isomer formation due to stereogenic N ligand atoms was confirmed. Moreover, DFT simulations revealed energetic profile of isomer formation. Computational outcomes are in agreement with spectroscopic instrumental findings, both strongly indicating a non-stereoselective reaction between selected esters and K₂[PdCl₄], forming isomers.     

Synthesis and characterization of novel heat resistant poly(amide imide)s

A series of new poly(amide imide)s was prepared from new diacid containing sulfone, ether, amide and imide groups with various aromatic diamines. The diacid was synthesized via four steps, starting from reaction of 4-aminophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide afforded N-(4-hydroxy phenyl)-4-nitrobenzamide. In the second step, reduction of nitro group resulted in preparation of 4-amino-N-(4-hydroxy phenyl) benzamide. In the next step for the preparation of diamine, the reaction of 4-amino-N-(4-hydroxy phenyl) benzamide with bis-(4-chlorophenyl) sulfone in the presence of K₂CO₃ was achieved. The prepared sulfone ether amide diamine was reacted with two moles of trimellitic anhydride to synthesize related sulfone ether amide imide diacid. The precursors and final monomer were characterized by FT-IR, H-NMR and elemental analysis. Direct polycondensation reaction of the sulfone ether amide imide diacid with different diamines in the presence of triphenyl phosphite afforded five different poly (sulfone ether amide imide amide)s. The obtained polymers were fully characterized and their physical properties including thermal behavior, thermal stability, solubility, and inherent viscosity were studied.     

Structural investigation of 5,10‐A2B2‐type porphyrins: palladium(II) and zinc(II) complexes of 5,10‐dibromo‐15,20‐bis(4‐methylphenyl)porphyrin

The analysis of [5,10‐dibromo‐15,20‐bis(4‐methylphenyl)porphyrinato]palladium(II), [Pd(C₃₄H₂₂Br₂N₄)], and [5,10‐dibromo‐15,20‐bis(4‐methylphenyl)porphyrinato](methanol)zinc(II), [Zn(C₃₄H₂₂Br₂N₄)(CH₄O)], reveals a small but localized influence of the bromine residues on the conformation of the macrocycle. A comparison of the 5,10‐dibromo substituent pattern with literature data for 5,15‐dibromoporphyrins shows similar in‐plane distortions in both but a different mix of out‐of‐plane distortion modes for the different regiochemical arrangements.     

Six-membered ring chelate complexes of Pd(II) and Pt(II) derived from di-(2-pyridyl)pyrimidin-2-ylsulfanylmethane

Cis-[MLCl₂] complexes of di-(2-pyridyl)pyrimidin-2-ylsulfanylmethane ligand (L), where M = Pd (1), and M = Pt (2) have been synthesized. Reaction of 1 with L in presence of Na[BF₄] and hot acetonitrile produced the complex [PdL₂](BF₄)₂ (3). Complexes 1-3 and ligand L have been characterized by elemental analyses, IR and NMR spectroscopy. Crystal structures of 1, 3 and L were determined by single crystal X-ray diffraction analyses, showing nonplanar structures with the pyridinic rings twisted around the bridging carbon and the ipso carbon bonds. 1 and 3 displayed a bidentate coordination of L to the palladium atom with the formation of six-membered chelate rings, where the local geometry at palladium atom was distorted square planar. In 3 the palladium atom was coordinated to two dipyridyl ligands through two of the pyridinic nitrogen atoms to form a cationic complex stabilized by two tetrafluoroborate counter-ions.     

Synthesis of chiral imino- and amino-imidazolium salts and of chelating amino-N-heterocyclic carbene palladium(II) complexes

A new preparation of chiral imino-imidazolium salts has been developed by condensation of chiral primary amines with 1-(2-oxo-2-phenyl-ethyl)-imidazolium salts in chloroform. This reaction gave the (E)-imino-imidazolium salts with stereoselectivities superior to 95:5. The structure of the imines were determined by NMR analyses. Reduction of the chiral (E)-imino-imidazolium salts with NaBH₄ in MeOH led to amino-imidazolium salts as a mixture of diastereomers with selectivities ranging from 84:16 to 90:10. The major diastereoisomer could be purified in some cases by crystallization and the absolute configurations were determined by X-ray diffraction. Chelating amino-N-heterocyclic carbene dichloro palladium(II) complexes were obtained in two steps via formation of the corresponding silver(I) complexes and reaction of these latters with bis(acetonitrile)dichloropalladium. Crystal structure details of a cis-dichloro amino-imidazol-2-ylidene palladium complex are presented and confirmed the formation of a six-membered Pd-metallocycle.     

Crystal structures of (azido)(pentamethylcyclopentadienyl)iridium(III) complexes containing various types of bidentate ligands

Several (azido)iridium(III) complexes having a pentamethylcyclopentadienyl (Cp∗) group, [Cp∗Ir(N₃)₂(Ph₂Ppy-κP)] (1: Ph₂Ppy = 2-diphenylphosphinopyridine), [Cp∗Ir(N₃)(Ph₂Ppy-κP,κN)]CF₃SO₃ (2), [Cp∗Ir(N₃)(dmpm)]PF₆ (3: dmpm = bis(dimethylphosphino)methane), [Cp∗Ir(N₃)(Ph₂Pqn)]PF₆·$·$CH₃OH (4·$·$CH₃OH: Ph₂Pqn = 8-diphenylphosphinoquinoline), and [Cp∗Ir(N₃)(pybim)] (5: Hpybim = 2-(2-pyridyl)benzimidazole) have been prepared and their crystal structures have been analyzed by X-ray diffraction. In complex 1, the Ph₂Ppy ligand is only coordinated via the P atom (-κP), while in 2 it acts as a bidentate ligand through the P and N atoms (-κP,κN) to form a four-membered chelate ring. Comparing the structural parameters of the chelate ring in 2 with those of a similar five-membered chelate ring formed by Ph₂Pqn in 4, it became apparent that the angular distortion in the Ph₂Ppy-κP,κN ring was remarkable, although the Ir–P and Ir–N bonds in the Ph₂Ppy-κP,κN ring were not elongated very much from the corresponding bonds in the Ph₂Pqn-κP,κN ring. In the pybim complex 5, the five-membered chelate ring was coplanar with the pyridine and benzimidazolyl rings. With the related (azido)iridium(III) complexes analyzed previously, comparison of the structural parameters of the Ir–N₃ moiety in [Cp∗Ir^III(N₃)(L–L′)]^+/0 complexes reveals an anomalous feature of the 2,2′-bipyridyl (bpy) complex, [Cp∗Ir(N₃)(bpy)]PF₆.     

Rapid access to 3-(N-substituted)-aminoquinolin-2(1H)-ones using palladium-catalyzed C-N bond coupling reaction

A series of 3-(N-substituted)-aminoquinolin-2(1H)-ones have been synthesized by the palladium-catalyzed C-N coupling reaction starting from 3-bromoquinolin-2-(1H)-ones. Various nucleophiles including amines, amides, sulfonamides, carbamates and ureas have been used successfully. In all the cases, the reactions take place rapidly in 1,4-dioxane and proceed in good to excellent yield using palladium acetate as a catalyst, Xantphos as a ligand and Cs₂CO₃ as a base.     

Honeycomb-like g-C3N4/CeO2-x nanosheets obtained via one step hydrothermal-roasting for efficient and stable Cr(VI) photo-reduction

Graphitic carbon nitride (g-C₃N₄)-based materials are regarded as one of the most potential photocatalysts for utilizing solar energy. In this work, we reported a facile one step in-situ hydrothermal-roasting method for preparing honeycomb-like g-C₃N₄/CeO₂ nanosheets with abundant oxygen vacancies (g-C₃N₄/CeO_2-x). The hydrothermal-roasting and incomplete-sealed state can (i) generate an in-situ reducing atmosphere (CO, N₂, NH₃) to tune the concentration of oxygen vacancies in CeO₂; (ii) beneficial to prevent continuous growth of g-C₃N₄ and results in honeycomb-like g-C₃N₄/CeO_2-x hybrid nanosheets. What is more, the g-C₃N₄/CeO_2-x photocatalyst exhibited extended photoresponse range, increased specific surface area and obviously enhanced separation efficiency of photogenerated electron-hole pairs. As a proof-of-concept application, the optimized g-C₃N₄/CeO_2-x nanosheets could achieve 98% removal efficiency for Cr(VI) under visible light irradiation (λ ≥ 420 nm) within 2.5 h, which is significantly better than those of pure g-C₃N₄ and CeO₂. This work provides a new idea for more rationally designing and constructing g-C₃N₄-based catalysts for efficient extended photochemical application.     

Synthesis and crystal structure of a heterobinuclear complex [(PhPPy2)2PdCuCl2]ClO4 (PhPPy2=bis(2-pyridyl)phenylphosphine)

The mononuclear palladium(II) complex trans-[PdCl₂(PhPPy₂)₂] (1) reacts with [Cu(CH₃CN)₄]ClO₄ to afford the heterobinuclear [(PhPPy₂)₂PdCuCl₂]ClO₄·2CH₃CN (2), bridged by two PhPPy₂ ligands in a new mode. Complex 2 crystallizes in space group P2₁/c with a?=?12.947(1), b?=?9.142(1), c?=?33.454(2)?Å, β?=?99.698(1)°. The copper(I) and palladium(II) ions in 2 adopt distorted tetrahedral and square-planar geometry, respectively. At room temperature, the complex is photoluminescent in solution.     

Comparative studies of ONNO-based ligands as ionophores for palladium ion-selective membrane sensors

Palladium sensors based on two neutral ionophores, N,N′-bis(acetylacetone) cyclohexanediamine (L₁) and N,N′-bis(o-hydroxyacetophenone)-1,2-cyclohexanediamine (L₂) for quantification of palladium ions are described. Effect of various plasticizers (o-NPOE, DBP, DEP, DOP, TBP, and CN) and anion excluder, sodium tetra phenyl borate (NaTPB) has been studied. The best performance is obtained with a membrane composition of PVC:o-NPOE:ionophore (L₁):NaTPB of 150:300:5:5 (%, w/w). The sensor exhibits significantly enhanced selectivity towards palladium ion over the concentration range 1.0 × 10⁻⁸ to 1.0 × 10⁻¹ M with a lower detection limit of 4.0 × 10⁻⁹ M and a Nernstian compliance (29.1 ± 0.3 mV decade⁻¹ of activity) within pH range 2.0-6.0 and fast response time of 10 s. Influence of the membrane composition and possible interfering ions has also been investigated on the response properties of the electrode. Fast and stable response, good reproducibility and long-term stability of the sensor are demonstrated. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol and acetonitrile and could be used for a period of 4 months. Selectivity coefficients determined with fixed interference method (FIM) indicate high selectivity for palladium. The proposed electrode shows fairly good discrimination of palladium from other cations. The application of prepared sensor has been demonstrated in determination of palladium ions in spiked water sample.     

Extractive spectrophotometric determination of palladium with N,N,N',N'-tetra(2-ethylhexyl)-thiodiglycolamide T(2EH)TDGA

A precise, sensitive and selective method for the spectrophotometric determination of palladium (II) using N,N,N′,N′-tetra(2-ethylhexyl) thiodiglycolamide T(2EH)TDGA as an extractant is described. Palladium (II) forms yellow colored complex with T(2EH)TDGA which exhibits an absorption maximum at ∼300 nm. The colored complex obeys Beer's law in the concentration range 1.0-15.0 μg ml⁻¹ of palladium with a molar absorptivity of 1.29 × 10⁵ M⁻¹ cm⁻¹. The effects of various experimental parameters have been studied to establish the optimum conditions for the extraction and determination of palladium. The precision of the method has been evaluated and the relative standard deviation has been found to be less than 0.5%. The method has been successfully applied to the determination of palladium in simulated high level liquid waste (SHLW) solution.     

Synthesis and characterization of Cu,Ni and Zn binding capability of some amino- and imidazole hydroxamic acids: Effects of substitution of side chain amino-N for imidazole-N or hydroxamic-N-H for -N-CH3 on metal complexation

Solution equilibrium studies on Cu(II)-, Ni(II)- and Zn(II)-N-Me-β-Alaninehydroxamic acid (N-Me-β-Alaha), -N-Me-α-alaninehydroxamic acid (N-Me-α-Alaha), -Imidazole-4-carbohydroxamic acid (Im-4-Cha), -N-Me-imidazole-4-carbohydroxamic acid (N-Me-Im-4-Cha) and -Imidazole-4-acetohydroxamic acid (Im-4-Aha) systems have been performed by pH-potentiometry, UV–Vis spectrophotometry, EPR, CD, ESI-MS and ¹H NMR methods. According to the results: (i) the amino-N atoms are more basic in N-Me-α-Alaha and N-Me-β-Alaha than the hydroxamate function, but the trend is just the opposite between the imidazole-N(3) and hydroxamate. (ii) The metal ion anchor is always the hydroxamate part in the amino acid derivatives, while it is always the imidazole-N(3) in the studied imidazolehydroxamic acids. (iii) The three studied N-Me derivatives do not form metallacrowns. Only hydroxamate type chelate is formed with N-Me-β-Alaha, but with N-Me-α-Alaha a new type of coordination mode (via amino-N and hydroxamate-O) also exists. N-Me-Im-4-Cha also forms a dinuclear complex, [M₂L₃], with Cu(II) and Ni(II) (but not with Zn(II)). In this complex, one of the three ligands might bridge the two metal ions (five-membered hydroxamate-(O,O) plus five-membered (N_im, O_carb) bridging bis-chelating mode), while each of the additional two ligands binds to one metal. (iv) The two studied N–H derivatives, having dissociable proton on the hydroxamic-N, are able to form metallacrown species. A pentanuclear complex, [M₅L₄H₋₄], is exclusively formed above pH 4 between Cu(II) and Im-4-Aha. Interestingly, this 12-metallacrown-4 type complex, although together with various mononuclear binding isomers, appears also with Ni(II) and Zn(II). Unfortunately, the complexes of Im-4-Cha are not soluble in water at physiological pH at all.     

(N,N) vs. (N,S) chelation of palladium in asymmetric allylic substitution using bis(thiazoline) ligands: A theoretical and experimental study

New thiazoline-containing ligands including non-symmetric bis(thiazolines) and oxazoline-thiazolines were synthesized and then compared to C₂-symmetric bis(thiazolines) in the palladium-catalyzed allylic substitution. The experimental results obtained in this study support the hypothesis of a competition between the (N,N) and the (N,S) palladium chelation, when sterically hindered bis(thiazolines) are used as ligands. A quantum chemical study performed on the Pd-complexes derived from three selected ligands, two C₂-symmetric bis(thiazolines) and one oxazoline-thiazoline, also supports this hypothesis.     

Palladium(II) complexes with S-benzyl dithiocarbazate and S-benzyl-N-isopropylidenedithiocarbazate: Synthesis,spectroscopic properties and X-ray crystal structures

Two new palladium(II) bis(NS) chelates, bis(S-benzyl dithiocarbazato)palladium(II) (1) and bis(S-benzyl-N-isopropylidenedithiocarbazato)palladium(II) (2), have been prepared and characterized using single-crystal X-ray diffraction and spectroscopic (electronic, IR and NMR) techniques. Complex 1 has a perfectly square planar trans configuration (point group C_i), while complex 2 has a distorted square planar cis configuration.     

Liquid–liquid extraction of palladium(II) and gold(III) with N-benzoyl-N′,N′-diethylthiourea and the synthesis of a palladium benzoylthiourea complex

N-Benzoylthioureas have been reported to form complexes with gold (III) and palladium (II) and other transition metals. In this study, an N-benzoyl-N′,N′-diethylthiourea (3f) ligand was used in the solvent extraction of palladium(II) and gold(III) from aqueous chloride media (0.1 mol l−1 NaCl). The distribution coefficient was determined as a function of both metal concentration in the aqueous phase and extractant concentration in the organic phase. The experimental distribution data were numerically analysed by letagrop-distr software in order to obtain the thermodynamic model corresponding to the metal extraction. It is found that pH does not affect the metal extraction process in the 1–2 pH range. Synthesis of the palladium benzoyl thiourea complexes was carried out by mixing quantities of metal and ligand solutions in methanol in a 1:2 ratio stoichiometric. Yields of 74 and 80.9% were obtained for the Pd-3c and Pd-3f complexes. In order to confirm the formation of the palladium complexes, NMR, FTIR and MS analyses were performed. From MS analyses a complex stoichiometry 1:2 (metal:ligand) was confirmed. The formation of crystals of palladium N-benzoyl-N′,N′-diethylthiourea complex (Pd-3f) in the methanolic solution allows the characterisation of the complex structure by XRD. The resulting structure is described and discussed. Bis(1,1,-diheptadecyl-3-benzoyl-thioureate)palladium(II) (Pd-3c) and bis(1,1,-diheptadecyl-3-benzoyl-thioureate)palladium(II) (Pd-3f) were used as ionophores in polymeric membrane electrodes. Their potentiometric responses to different anionic metal chlorocomplexes are evaluated and discussed taking into consideration the results obtained in the liquid–liquid distribution studies. A nernstian response was only obtained for AuCl4 − (PDL=8.8×10−8) and PdCl4 2− (PDL=1.5×10−4 M) with a selectivity coefficient of KAuCl4-, PdCl42−pot=−3.4, calculated taking AuCl4 − as being the primary anion.