Extraction of chromium(VI) with 4-methyl-3-pentene-2-one and subsequent photometric determination as diphenylcarbazide complex

Summary A rapid and sensitive method is developed for the solvent extraction of chromium(VI) with mesityl oxide. Chromium(VI) is extracted with pure mesityl oxide from 1 M HCl containing 2.5 M KCl as salting-out agent. The metal from the organic phase is stripped with dilute ammonia and determined photometrically as its dephenylcarbazide complex at 540 nm. Chromium(VI) can be extracted in presence of a large number of ions. Only 30 min are required for complete separation and determination. Average recovery was 98.6 ± 1.4%, the standard deviation ± 1.3% (14.9 g of Cr).

---

Extraktion von Chrom(VI) mit 4-Methyl-3-penten-2-on und anschlieende photometrische Bestimmung als Diphenylcarbazidkomplex

Zusammenfassung Chrom wird mit reinem Mesityloxid aus 1 M salzsaurer, 2,5 M KCl enthaltender Lösung extrahiert, mit Ammoniaklösung aus der organischen Phase entfernt und photometrisch als Diphenylcarbazidkomplex bei 540 nm bestimmt. Zahlreiche Fremdionen stören die Extraktion nicht. Für Abtrennung und Bestimmung werden 30 min benötigt. Im Durchschnitt wurden 98,6 ± 1,4 % wiedergefunden. Die Standard-abweichung betrug ± 1,3% (für 14,9 g Cr).

     

Extraction and separation of bismuth(III)

Separation of bismuth from beryllium, lead, iron(III), indium, scandium, lanthanum, antimony(III), zirconium, titanium, thorium, vanadium(V), molybdenum(VI), uranium (VI) and chromium(VI) is achieved by selective extraction of bismuth from 0.1M sodium salicylate solution (adjusted to pH 7) into mesityl oxide (MeO). The extracted species is Bi (HOC(6)H(4)COO)(3).3MeO. The results are accurate within +/- 0.5%, with a standard deviation of 0.8%. The separation and determination of bismuth takes only 15 min.     

Solvent extraction separation of hafnium with 4-methyl-3-pentene-2-one

A new method for the extractive separation of hafnium from zirconium is presented. Zirconium is extracted with pure mesityl oxide from 4M nitric acid/4M sodium nitrate medium, followed by extraction of hafnium with mesityl oxide from 0.4M hydrochloric acid/2M ammonium thiocyanate medium. It is possible to accomplish clean separations of Hf from Zr in ratios from 1:20 to 1:200. The separation of hafnium from commonly associated elements such as scandium, yttrium, uranium, thorium, alkali and alkaline earth metals in 500:1 weight ratio to hafnium is also possible.     

Extraction studies of copper with mesityl oxide

Summary A method has been developed for the extraction of copper(II) both at microgram and milligram level from bromide media using mesityl oxide as an extractant. The copper-bromo complex formed at 3.5 mol/l hydrobromic acid concentration showed quantitative extraction into mesityl oxide. Various experimental parameters such as acid concentration, period of equilibration, stripping agents and diverse ions have been studied. The stripped metal ion is monitored spectrophotometrically or by atomic absorption spectrometry (AAS). The method is applicable to the analysis of pharmaceutical and alloy samples.     

Separation of zirconium by thin-layer chromatography

The thin-layer Chromatographie separation of a number of metal ions [Sc, Y, Zr, La, Sm, Th, U(VI), etc.] with solvent mixtures of mesityl oxide, ethanol and 5M nitric acid on silica gel-cellulose (5:1) thin-layer plates is reported. Zirconium remains stationary whilst the other metal ions move with the solvent, thus allowing a selective separation of zirconium from about 20 metal ions in ratios ranging from 100:1 to 1:100. Mixtures of various metal ions can also be separated.     

Solvent extraction of uranium(VI) using dibenzo-18-crown-6 in nitrobenzene from ammonium thiocyanate medium

Solvent extraction of uranium(VI) from aqueous solutions of ammoniumthiocyanate has been investigated in the presence of dibenzo-18-crown-6. Uranium(VI)was quantitatively extracted from 1.0M ammonium thiocyanate using 0.01M dibenzo-18-crown-6in nitrobenzene. Back extraction of U(VI) was quantitative with various strippingagents. Separation of U(VI) from other elements was achieved from binary aswell as multicomponent mixtures. Uranium was determined in monazite sand andsyenite rock samples. The method is very simple, rapid and highly reproducible(approximately ±2%).     

Homogeneous liquid-liquid extraction of uranium(VI) using tri-n-octylphosphine oxide.

A simple and efficient method for the selective separation and preconcentration of uranium(VI) using homogeneous liquid-liquid extraction was developed. Tri-n-octylphosphine oxide (TOPO) and tri-n-butylphosphate (TBP) were investigated as complexing ligands, and perfluorooctanoate ion (PFOA-) was applied as a phase separator agent under strongly acidic conditions. Under the optimal conditions ([PFOA-] = 1.7 x 10(-3) M, [TOPO] = 5.4 x 10(-4) M, [HNO3] = 0.3 M, [acetone] = 3.2% v/v) 10 microg of uranium in 40 ml aqueous phase could be extracted quantitatively into 8 microl of the sedimented phase. The maximum concentration factor was 5000-fold. However, an effort for the quantitative extraction using TBP was inefficient and the percent recovery was at most 56.7. The influence of the type and concentration of acid solution, optimum amount of the ligand, type and volume of the organic solvent, concentration of PFOA, volume of the aqueous sample and effect of different diverse ions on the extraction and determination of uranium(VI) were investigated. The proposed method was applied to the extraction and determination of uranium(VI) in natural water samples.     

Extraction and spectrophotometric determination of cobalt(II) with thiobenzoylacetone and simultaneous determination of cobalt and nickel

Thiobenzoylacetone in benzene is used for the extraction and spectrophotometric determination of cobalt at pH 8.4-9.1. The orange-yellow complex is measured at 460 nm. The system conforms to Beer's law over the range 0.20-4.58 microg ml of extract. The colour of the complex is stable for at least 144 hr. Cobalt(II) is quantitatively extracted and determined in the presence of 200:1 (w w ratios) of various ions. The method is made selective by using common sequestering agents such as thiourea or fluoride or by selective extraction with mesityl oxide, tributylphosphate and acetylacetone. It is possible to determine cobalt in the presence of nickel by simultaneous spectrophotometry. The method is rapid, simple, selective and sensitive.     

Speciation of hexavalent chromium in waters by liquid-liquid extraction and GFAAS determination

Diperoxo chromium oxide is produced by reaction of hydrogen peroxide on chromium(VI). Diperoxo chromium creates a complex with ethyl acetate, while chromium(III) remains in an unchanged form in the aqueous phase. By this means chromium(VI) can be extracted into ethyl acetate from the aqueous phase. The optimal conditions of Cr(III)-Cr(VI) separation, as well as the chromium content of the ethyl acetate phase were determined with graphite furnace atomic absorption spectrometry. In the second extraction of Cr(VI) from ethyl acetate back into water phase an additional preconcentration of chromium(VI) can be carried out. The detection limit (3σ) of the developed method found to be 200 ng dm^− 3 for the first extraction and 50 ng dm^− 3 after using the twofold extraction. In consequence of the matrix free ethyl acetate phase after the first extraction, with this separation a really extensive preconcentration of chromium(VI) can be realized.     

Separation studies of molybdenum(VI) and rhenium(VII) using TPPO as an extractant

A simple, rapid and reproducible method for the extractive separation of molybdenum(VI) and rhenium(VII) is proposed using triphenylphosphine oxide (TPPO) dissolved in toluene as an extractant. The extractions are carried out from the hydrochloric and hydrobromic acid medium. The extraction of molybdenum is quantitative from 2.54-3.10 M hydrochloric acid and from 3.76-3.98 M hydrobromic acid, and that of rhenium is from 6.78-7.91 M hydrochloric acid. The probable nature of the extractable species is established using log distribution ratio-log concentration plots. The method permits mutual separation of molybdenum(VI) and rhenium(VII) and is applicable for the analysis of alloys and pharmaceutical sample. The detection limits for molybdenum(VI) and rhenium(VII) are 0.8 ppm and 4 ppm respectively.     

Solvent extraction of tellurium (IV) with mesityl oxide. Direct nephelometric determination

Summary A fast and selective method has been developed for the extraction of tellurium(IV) with mesityl oxide. Tellurium(IV) is quantitatively extracted by pure mesityl oxide from 2.5–3M hydrochloric acid solutions. After stripping with water, it is determined nephelometrically as the bluish sol. The extracted species probably has the composition TeCl₄ · 2MeO. The optimum period of equilibration is 30 seconds. Tellurium can be extracted and determined in the presence of a large excess of selenium, silver, bismuth, lead, copper and nickel which are associated with it in minerals.

---

Zusammenfassung Ein schnelles und selektives Verfahren zur Extraktion von Tellur(IV) mit Mesityloxid wurde ausgearbeitet. Aus 2,5- bis 3-m Salzsäure gelingt diese Extraktion quantitativ. Nach Waschen mit Wasser wird das bläuliche Sol nephelometriert. Die extrahierte Substanz hat vermutlich die Zusammensetzung TeCl₄ · 2MeO. Die Gleichgewichtseinstellung erfolgt in 30 sec. Tellur kann so in Gegenwart eines großen Überschusses von Se, Ag, Bi, Pb, Cu und Ni bestimmt werden, mit denen es in Mineralen vergesellschaftet ist.

     

Liquid-liquid extraction of niobium(V) in the presence of other metals with high molecular mass amines and ascorbic acid

A novel method is proposed for the solvent extraction of niobium(V). A 0.1M solution of Aliquat 336S in xylene quantitatively extracts microgram quantities of niobium(V) from 0.01M ascorbic acid at pH 3.5-6.5. Niobium from the organic phase is stripped with 0.5M nitric acid and determined spectrophotometrically in the aqueous phase as its complex with TAR. The method permits separation of niobium not only from tantalum(V) but also from vanadium(IV), titanium(IV), zirconium(IV), thorium(IV), chromium(III), molybdenum(VI), uranium(VI), iron(III), etc. Niobium from stainless steel was determined with a precision of 0.42%.     

Effect of temperature on the stability constants of chloro complexes of actinyl ions

Stability constants of chloride complexes of U(VI), Np(VI) and Pu(VI) have been determined by the method of extraction chromatography at an ionic strength of 2.0 and [H⁺]=2.0M. Dilute HDEHP has been used as the stationary phase.     

Determination of uranium(vi) by tri-n-octylphosphine oxide extraction and coulometric titration

Uranium can be determined in the usual types of dissolver solutions by extraction of uranium (VI) into a cyclohexane solution of tri-n-octylphosphine oxide (TOPO), back-extraction into an ammonium sulfate solution, and coulometric titration at controlled potential. Optimum conditions were established for the extraction and back-extraction, and the overall perfomance of the method was evaluated. The method is accurate, precise, and widely applicable. It should be very useful in nuclear reactor technology.     

Speciation and determination of chromium ions by dispersive micro solid phase extraction using magnetic graphene oxide followed by flame atomic absorption spectrometry

A selective, simple and fast dispersive micro solid phase extraction method using magnetic graphene oxide (GO) as an efficient sorbent has been developed for the extraction, separation and speciation analysis of chromium ions. The method is based on different adsorption behaviour of Cr(VI) and Cr(III) species onto magnetic GO in aqueous solutions which allowed the selective separation and extraction of Cr(VI) in the pH range of 2.0–3.0. The retained Cr(VI) ions by the sorbent were eluted using 0.5 mL of 0.5 mol L^?1 nitric acid solution in methanol and determined by ?ame atomic absorption spectrometry. Total chromium content was determined after the oxidation of Cr(III) to Cr(VI) by potassium permanganate. All effective parameters on the performance of the extraction process were thoroughly investigated and optimised. Under the optimised conditions, the method exhibited a linear dynamic range of 0.5–50.0 µg L^?1 with a detection limit of 0.1 µg L^?1 and pre-concentration factor of 200. The relative standard deviations of 3.8% and 4.6% (n = 8) were obtained at 25.0 µg L^?1 level of Cr(VI) for intra- and inter-day analysis, respectively. The method was successfully applied to the speciation and determination of Cr(VI) and Cr(III) in environmental water samples.     

Toluene/ter-butanol mixed solvent for the selective extraction of Cr(VI) from divalent heavy metals.

A solvent-extraction system comprising toluene/ter-butanol (ter-BuOH) mixed solvent as the organic phase was developed to selectively extract Cr(VI) from acidic chloride media in the presence of divalent metals, namely Cd(II), Co(II), Cu(II), Ni(II) and Zn(II) under 5 M CaCl2 salting-out conditions. Chromium(VI) was selectively extracted as a solvated ion-pair of [ter-BuOH2+ x CrO3Cl-] at ter-BuOH mole fractions of between 0.1 and 0.6 (9.0-57.2% in volume). Divalent metals were extracted at ter-BuOH mole fraction over 0.6 with extraction percents of Co (< 20%), Cu (< 15%), Ni (< 10%) and Zn (< 20%). The concentrations of Ca2+, water and ter-BuOH in the organic phase and ter-BuOH in the aqueous phase were determined to find out the effects on the extraction of Cr(VI). The chemical species of Cr(VI) in acidic chloride media containing 5 M CaCl2 and 0.1 M HCl was confirmed to be the CrO3Cl- species. The effects of the acid, salt concentrations in the aqueous phase and the solvent composition of a mixed organic solvent on the extraction of Cr(VI) were evaluated. Based on the above studies, the extraction mechanism was elucidated and the optimum extraction conditions were determined.     

Extractive separation of molybdenum as Mo(V) xanthate from Iron, vanadium, Tungsten, copper, uranium and other elements

A simple and selective extraction of molybdenum is described. Tungsten is masked with tartaric acid and molybdenum(VI) is reduced in 2M hydrochloric acid by boiling with hydrazine sulphate. Iron, copper and vanadium are then masked with ascorbic acid, thiourea and potassium hydrogen fluoride respectively. The molybdenum(V) is extracted as its xanthate complex into chloroform, from 1M hydrochloric acid that is 0.4M potassium ethyl xanthate. The complex is decomposed by excess of liquid bromine, and the molybdenum is stripped into alkaline hydrogen peroxide solution. The molybdenum is then determined by standard methods. Large amounts of Cu(II), Mn(II), Fe(III), Ti(IV), Zr, Ce(IV), V(V), Nb, Cr(VI), W(VI), U(VI), Re(VII) and Os(VIII) do not interfere. Several synthetic samples and ferromolybdenum have been rapidly and satisfactorily analysed by the method.     

The extraction of uranium(VI), americium and europium by LIX 64 and by a mixture of LIX 64 and tri-n-octylphosphine oxide

The extraction of U(VI), Eu and Am by the aromatic main component (HA) of LIX 64N dissolved in toluene was studied at pH 3–9. The values of pH_1/2 for the extraction with 0.146 M HA are 4.0, 5.5 and 5.2, and the pH's of maximum extraction are 6.0, 6.8, and 7.0 for U(VI), Eu and Am, respectively. The stoichiometry of the extracted chelates determined by the slope analysis is UO₂A₂ and MA_3–nY_n (n=1,2) for Eu and Am, the ligand Y being probably the nitrate anion. The addition of tri-n-octylphosphine oxide (TOPO) enhances the extraction of U(VI) and especially of Eu at pH<6. An Eu chelate species solvated by 2 TOPO molecules is extracted at pH 4 by the mixture of HA+TOPO, whereas the species extracted at pH 6.5 is not solvated by TOPO.     

Separation and spectrophotometric determination of uranium(VI) by extraction with tri-n-octylphosphine oxide and benzophenone

Uranium(VI) is separated by extraction from nitric acid medium into a molten mixture of tri-n-octylphosphine oxide and benzophenone at about 50°. The organic phase solidifies on cooling and is separated and dissolved in ethanol. The uranium(VI) in this solution is then determined spectrophotometrically with 1-(2-pyridylazo)-2-naphthol.     

Solvent extraction of zinc by 2-hexylpyridine in benzene from aqueous mineral acid — Thiocyanate media

Solvent extraction of Zn(II) by 2-hexylpyridine (HPy) in benzene has been studied from aqueous mineral acid—thiocyanate media. The extraction, though dependent on the acidity of the aqueous phase, is poor from mineral acids (HCl, HNO₃ or H₂SO₄). Addition of 0.02M KSCN to the aqueous phase enhances the distribution ratio by a factor of almost one thousand. The stoichiometry of the extracted complex established by the usual slope analysis method indicates that an ionic type complex, e.g. Zn(SCN)₄·(HPyH)₂, is responsible for extraction. Complexing anions like acetate, oxalate or citrate at 1 M concentration mask the extraction of Zn(II) almost completely. Separation factors determined at optimal conditions (0.1M HPy in benzene −0.05M H₂SO₄+0.2M SCN⁻) indicate that Zn(II), along with Hg(II), can be separated in a single extraction from a number of metals, e.g. Cs(I), Sr(II), Ln(III), Y(III), Cr(III) and (VI). Other metals of interest like Cu(II), Co(II), Fe(III), Mo(VI), U(VI) and Tc(VII) are coextracted but the separation factors are large enough to allow separation in a multistage extraction process.