Polyesters containing bicyclo[2.2.2]octane and bicyclo[3.2.2]nonane rings

Polyesters containing bicyclo[2.2.2]octane and bicyclo[3.2.2]nonane rings are prepared from 1,4-bis(carboethoxy)bicyclo[2.2.2]octane, 1,4-bis(hydroxymethyl)bicyclo[2.2.2]-octane and the 1,5-disubstituted bicyclo[3.2.2]nonane analogs. These polyesters are compared to the related polymers containing 1,4-phenylene and trans-1,4-cyclohexylene rings in terms of their melting point, thermal stabilities and oxidative stabilities. The lower symmetry of the bicyclo[3.2.2]nonane ring produces lower-melting polymers than the other ring systems. The remaining three rings are approximately equivalent in their effect on the melting point of a polymer provided that no more than one bicyclo[2.2.2]octane ring is present per polymer repeat unit. Two such rings produce a highermelting polymer than any other combination. Both the thermal and oxidative stabilities of the polyesters is improved by the presence of the bicyclo rings. This is attributed to the rings providing an approximation of a ladder polymer.     

Determination de la configuration absolue de quelques derives du bicyclo[2.2.2]octane: Utilisation comparee de la regle des octants et de la methode d'horeau

A series of bicyclo[2.2.2]octane derivatives whose absolute configurations are known through chemical correlations with confirmed reference products (bicyclo[2.2.2]octanol, bicyclo[2.2.2]octene carboxylic acid) have been prepared.     

Thermotropic copolyesters. III. Synthesis and characterization of liquid crystal copolyesters containing the bicyclo[2.2.2]octane ring system

A number of thermotropic copolyesters which contain the bicylo[2.2.2]octane ring system have been synthesized. Because of the stiffening effect of the bicyclo[2.2.2]octane group on the chain, the sebacoyl spacer was used to obtain meltable compositions.     

Equilibrium polymerization behavior in the cationic single ring‐opening polymerization of bicyclo orthoesters

The synthesis and cationic polymerization of the following bicyclo orthoesters were examined: 4‐ethyl‐2,6,7‐trioxabicyclo[2.2.2]octane, 1,4‐diethyl‐2,6,7‐trioxabicyclo[2.2.2]octane, 4‐ethyl‐1‐phenyl‐2,6,7‐trioxabicyclo[2.2.2]octane, 4‐ethyl‐1‐(4‐methoxyphenyl)‐2,6,7‐trioxabicyclo[2.2.2]octane, and 4‐ethyl‐1‐(4‐nitrophenyl)‐2,6,7‐ trioxabicyclo[2.2.2]octane. All the monomers underwent equilibrium polymerization, which was confirmed by the relationships between the polymerization temperature and monomer conversion. The obtained polymers afforded the original monomers via an acid‐catalyst treatment with a low reagent concentration in CH₂Cl₂ at 20 °C. The equilibrium monomer concentration was constant, regardless of the initial reagent concentration, in both polymerization and depolymerization. The bicyclo orthoesters with a bulky and electron‐withdrawing substituent showed a larger equilibrium monomer concentration. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3159–3167, 2001     

Synthesis of molecular motors incorporating para-phenylene-conjugated or bicyclo[2.2.2]octane-insulated electroactive groups

The insulating role of the bicyclo[2.2.2]octane fragment has been theoretically evaluated by comparing the electronic coupling parameter (V(ab)) in 1,4-bis(ferrocenyl)benzene (1) and 1,4-bis(ferrocenyl)bicyclo[2.2.2]octane (2). The geometries were optimized by DFT and an extended Hückel calculation was performed to evaluate V(ab) by the dimer splitting method. The calculations showed a 12-fold decrease of the electronic coupling from 60 meV for 1 to 5 meV for 2. The second part describes the synthesis of two potential molecular motors with one incorporating the insulating bicyclo[2.2.2]octane fragment. These molecules are based on a ruthenium complex bearing a tripodal stator functionalized to be anchored onto surfaces. The ferrocenyl electroactive groups and the cyclopentadienyl (Cp) rotor are connected through a p-phenylene spacer (5) or through a spacer incorporating an insulating bicyclo[2.2.2]octane moiety (6).     

Oxidative Dearomatization: Synthesis of Functionalized Bicyclo[2.2.2]octenones,Sigmatropic Shift in Excited State,and Radical-Induced Cleavage of Cyclopropane Ring

Synthesis of novel bicyclo[2.2.2]octenones endowed with a β,γ-enone system in which γ-carbon is substituted with an electron-withdrawing group from simple aromatics is described. Oxa-di-pi-methane reaction of bicyclo[2.2.2]octenones to functionalized bicyclo[3.3.0]octanes and their transformation to bicyclo[3.2.1]octane framework are also presented.     

Polar effects and structural variation in 4-substituted 1-phenylbicyclo[2.2.2]octane derivatives: a quantum chemical study

The transmission of polar effects through the bicyclo[2.2.2]octane framework has been investigated by ascertaining how the geometry of a phenyl group at a bridgehead position is affected by a variable substituent at the opposite bridgehead position. We have determined the molecular structure of several Ph-C(CH(2)-CH(2))(3)C-X molecules (where X is a charged or dipolar substituent) from HF/6-31G and B3LYP/6-311++G molecular orbital calculations and have progressively replaced each of the three -CH(2)-CH(2)- bridges by a pair of hydrogen atoms. Thus the bicyclo[2.2.2]octane derivatives were changed first into cyclohexane derivatives in the boat conformation, then into n-butane derivatives in the anti-syn-anti conformation, and eventually into assemblies of two molecules, Ph-CH(3) and CH(3)-X, appropriately oriented and kept at a fixed distance. For each variable substituent the deformation of the benzene ring relative to X = H remains substantially the same even when the substituent and the phenyl group are no longer connected by covalent bonds. This provides unequivocal evidence that long-range polar effects in bicyclo[2.2.2]octane derivatives are actually field effects, being transmitted through space rather than through bonds. Varying the substituent X in a series of Ph-C(CH(2)-CH(2))(3)C-X molecules gives rise to geometrical variation (relative to X = H) not only in the benzene ring but also in the bicyclo[2.2.2]octane cage. The two deformations are poorly correlated. The rather small deformation of the benzene ring correlates well with traditional measures of long-range polar effects in bicyclo[2.2.2]octane derivatives, such as sigma(F) or sigma(I) values. The much larger deformation of the bicyclo[2.2.2]octane cage is controlled primarily by the electronegativity of X, similar to deformation of the benzene ring in Ph-X molecules. Thus the field and electronegativity effects of the substituent are well separated and can be studied simultaneously, as they act on different parts of the molecular skeleton.     

Divergence in photoinduced electron transfer (PET) reactions: a useful strategy towards identifying route-selectivity in mixed ketones

The work utilized photoinduced electron transfer (PET) reactions to identify the preferred photoreaction route in molecules having juxtaposed α,β and β,γ-enones. Such process directly converted 2-hydroxyimino derivatives of 5-benzoylbicyclo[2.2.2]octenones to the corresponding bicyclo[3.2.1]octane derivatives. First evidence of Type B rearrangement in α,β-enones having acyl substitution at Cγ-position has been depicted in this work. In rigid mixed enones, this has been found to be generally the preferred photoreaction route.     

A New Route to the Synthesis of 7-Functionalised Bicyclo[2.2.1]Heptane Derivatives

A new route to the synthesis of 7-functionalised bicyclo[2.2.1]heptane derivatives having a bridgehead alkoxy group is described involving Wolff rearrangement of α-diazo ketone in a bicyclo[2.2.2]octane derivative.     

The stepwise heats of hydrogenation of barrelene,an ab initio study

Ab initio Hartree-Fock calculations at the 6–31G*//3–21G level of theory are reported for bicyclo[2.2.2]-2,5,7-octatriene (barrelene), 1 , bicyclo[2.2.2]-2,5-octadiene, 2 , bicyclo[2.2.2]-2-octene, 3 , and bicyclo-[2.2.2]octane, 4 . The stepwise heats of hydrogenation of 1 were found to be 38.1, 31.8, and 28.4 kcal/mol, respectively. The unusually large heat of hydrogenation for the first double bond is attributed to the destabilizing electronic effects involving the interaction of the three double bonds of 1 .     

Synthesis of bicyclo[2.2.2]octane-2,3,5,6,7,8 hexols (Bishomoinositols) as glycosidase inhibitors

For the construction of the bicyclo[2.2.2]octane skeleton, 2,2-dimethyl-3a,7a-dihydro-1,3-benzodioxole was reacted with vinylene carbonate to give two isomeric cycloadditon products having the bicyclo[2.2.2]octane skeleton. Hydrolysis of the ketal ring and the opening of the carbonate functionality, followed by hydroxylation of the remaining double bond resulted in the formation of a symmetrical hexol. Epoxidation of the double bond in the cycloaddition products and the subsequent ring-opening reactions produce two additional hexol derivatives. One of the synthesized molecules exhibited enzyme-specific inhibition against alpha-glycosidase.     

Synthesis of N‐alkyl‐N′‐aryl or Alkenylpiperazines: A Copper‐Catalyzed C–N Cross‐Coupling in the Presence of Aryl and Alkenyl Triflates and DABCO

Unsymmetrical piperazines are key constituents of many pharmaceuticals. Given that the selective introduction of an aryl and alkyl motif onto the piperazine is not always straightforward, direct arylation and alkenylation of 1,4‐diaza‐bicyclo[2.2.2]octane would obviate the inefficiencies associated with the preparation of these target molecules. We have utilized alkyl halides, aryl or alkenyl triflates, and 1,4‐diaza‐bicyclo[2.2.2]octane for the synthesis of N‐alkyl‐N ′‐aryl or alkenylpiperazines. The optimum conditions are developed using CuCl, t‐BuOL i in NMP . Alkenyl triflates requires N ,N ′‐dimethylethylenediamine and higher temperature to afford the desired cross‐coupled product. Substrates bearing electron‐deficient and electron‐rich groups were successfully coupled under the optimum reaction conditions.     

Mechanism of interaction of substituents in bicycloalkane compounds

The mechanism of interaction of substituents in the 4-substituted bicyclo[2.2.2]oct-1-ylfluorides and bicyclo[2.2.1]hept-1-ylfluorides based on the inductive effect and the positive charge effect was studied.     

Barriers to inversion at nitrogen in bicyclic amines and hydrazines

Nitrogen inversion barriers have been measured for 7-chloro-1,7-diazabicyclo-[2.2.1] heptane and [2.2.2]octane; the unusual nature of the bridging nitrogen in bicyclo [2.2.11 systems is discussed.     

A comparison of mesogenic properties for one- and two-ring dipentyl derivatives of p-carboranes, bicyclo[2.2.2]octane, and benzene

A series of nonpolar single- and two-ring dipentyl derivatives of p-carboranes, bicyclo[2.2.2]-octane and benzene was investigated in the pure state and in binary mixtures with a nematic host. The resulting virtual nematic-isotropic transition temperatures [T_NI] for single ring compounds were compared with those for two ring compounds. All [T_NI] were compared with the molecular aspect ratios X and filling fractions F obtained from MNDO calculations. The highest effectiveness in promotion of the nematic phase was found for bicyclo[2.2.2]octane and 12-vertex p-carborane and ascribed to exceptional molecular rigidity and electronic properties, respectively. Results show that a high filling fraction F and molecular stiffness are the necessary factors for a highly stable nematic phase.     

Michael reaction on example of unsaturated ketones of bicyclo[3.3.1]nonane series

Conclusions The reaction of bicyclo[3.3.1]-3,7-nonadiene-2,6-dione with nitromethane under the conditions of the Michael reaction in ether solution proceeds with the formation of 2,6-bis(nitromethyl)bicyclo[3.3.1]-nonane-4,8-dione, while in methanol this reaction leads to the formation of a derivative with the bicyclo[2.2.2]octane structure, specifically 3-carbomethoxymethyl-2-nitrobicyclo[2.2.2]-5-octanone.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2624–2626, November, 1981.The authors thank Yu. T. Struchkova, A. I. Akhmedova, and A. I. Yanovskii for running the x-ray structure analysis.     

Substituent effects on the acidity of weak acids. 1. Bicyclo[2.2.2]octane-1-carboxylic acids and bicyclo[1.1.1]pentane-1-carboxylic acids

The acidities of 3- and 4-substituted bicyclooctane-1-carboxylic acids and 3-substituted bicyclo[1.1.1]pentane-1-carboxylic acids have been calculated at the MP2/6-311++G** theoretical level. There is good agreement between the calculated and observed gas-phase acidities. The acidities of the 4-substituted bicyclooctane acids were found to be linearly dependent on the C-X bond dipoles, as expected from a field effect. The substituents had a negligible effect on the electron density at C1. The difference in acidity between 4-chlorobicyclo[2.2.2]octane-1-carboxylic acid and the parent acid (6.2 kcal/mol) is reproduced by the Kirkwood-Westheimer treatment of substituent effects on acidity, but only if the bicyclooctane ring is given an effective dielectric constant of unity. The acidities of the 3-substituted bicyclooctane acids are linearly related to the corresponding 4-substituted acids with a slope of 0.9. The acidities of the 3-substituted bicyclo[1.1.1]pentane-1-carboxylic acids are linearly related to the C-X bond dipoles for this ring system (which are different than those for the bicyclooctanes), and they are also linearly related to the acidity of the 4-substituted bicyclo[2.2.2]octanecarboxylic acids with a slope of 1.34. The larger slope is due to the smaller bridgehead-bridgehead distance in the bicyclopentane ring than in bicyclo[2.2.2]octane.     

Derivate des 5, 9-Methano-6, 7,8, 9-tetrahydro-5 H-benzocycloheptens und Umlagerungen zum 1, 4-Äthano-1,2,3,4-tetrahydronaphtalin-System

Derivatives of 5,9-Methano,7,8,9-tetrahydro-5H-benzocycloheptene and Rearrangements to the 1,4-Ethano-I,2,3,4-tetrahydronaphthalene System Reduction of the oxime 2 with Raney alloy gives the amine 3a , with AlH₃ a mixture of the isomeric amines 3a and 3b , whilst LiAlH₄ yields the aziridines 4a and 4b . The bicyclo[3.2.1]octane 4b rearranges under acidic conditions to the bicyclo[2.2.2]octane 5 . The olefin 7 can be converted to the aminoalcohol 9 via the epoxide 8 and to the amine 13 using iodine isocyanate: the carbon skeleto. remains intact. However, treatment of the olefin 17 with iodine isocyanate leads to the bicyclo[2.2.2]octanes 21 and 24 in which a skeletal rearrangement has taken place. The configuration was determined by NMR. and X-ray analysis.     

Terminal end‐group efficiency for the nematic phase using model bicyclo[2.2.2]octanes

The synthesis is reported of new liquid crystals incorporating the 1,4‐disubstituted bicyclo[2.2.2]octane ring and a series of substituents in a terminal position on the molecular core. The nature of the terminal substituent is varied from apolar with a small dipole moment to polar with a strong dipole moment. The angle of the dipole moment with respect to the molecular axis is also varied. An updated order of terminal group efficiency for substituents in a terminal position for the nematic phase is provided. The bicyclo[2.2.2]octane ring shields halogen substituents in a lateral position on phenyl rings attached to the bicyclooctane ring to a small degree and reduces the steric efects of these substituents, giving rise to high relative nematic–isotropic transition temperatures.     

Synthesis and spectroscopic properties of ring-fused thiophene bridged push–pull dyes and their application in dye-sensitized solar cells

Bisdimethylfluorenylamino-based push–pull dyes bearing one or two benzo[c]thiophene and its precursor bicyclo[2.2.2]octadiene (BCOD) fused thiophene as π bridge have been synthesized. The effect of fused-ring on thiophene bridge for the spectroscopic and electrochemical properties of these dyes has been investigated. Dye-sensitized solar cells fabricated with these dyes show moderate photovoltaic properties.