3,4-Dihydroxybenzoic Acid As A Reagent for the Spectrophotometric Determination of Titanium

Abstract

The reaction between titanium(IV) and 3,4-dihydroxybenzoic acid in aqueous media results in an intensely colored complex which is stable for at least 8h. It allows the spectrophotometric determination of titanium in silicate rocks. The proposed method, in pH 4.0–6.0, shows a molar absorptivity of 1.43.10⁴ L.mole^?1.cm^?1 at 380 nm. Beer's Law is obeyed up to 3.0 μg/mL of titanium(IV). The interference of iron(III) can be eliminated by reduction to iron(II) with hydroxylamine hydrochloride. The method was applied to the determination of titanium in various standard rocks and the results indicated that the accuracy and precision are satisfatory.     

New Spectrophotometric Method for the Determination of Titanium in Soil and Standard Geochemical Samples

Abstract

In the present communication a simple and rapid spectrophotometric method for the determination of titanium is described. The method is based on the reaction of Ti(IV) with a newly synthesized reagent, 6-(4-nitrophenylazo)-3,4,5-trihydroxy benzoic acid (NATHB), in ethanol medium at pH 3.2 to 4.2. The complex exhibits an absorption maximum at 495 nm and Beer's law is valid over the range of 0.04 – 1.00 μg.ml^?1 Ti. The molar absorptivity is 3.48 × 10⁴ dm³.mole^?1. cm^?1. Most of the foreign metal ions and anions do not produce any colorations with NATHB at selected conditions. Based on these results, a simple and direct spectrophotometric method with high selectivity and sensitivity was proposed. The method has been successfully applied for the determination of titanium in 5 soil and 3 standard geochemical samples.     

Extraction and Spectrophotometric Determination of Zirconium(IV)

Abstract

A sensitive and selective method for the extraction and spectrophotometric determination of Zr(IV) with N-p-chlorophenyl-3,4-,5-trimethoxycinnamohydroxamic acid (PTCHA) has been developed. The binary complex of Zr(IV)-PTCHA is extracted from 2–6 M HCl into chloroform, having a maximum absorbance at 385 nm; molar absorptivity 2.1 × 10⁴ 1 mol^?1 cm^?1. A ternary complex with xylenol orange (Zr-PTCHA-XO) have been studied in chloroform-ethanol media, which absorbs at 540 nm; molar absorptivity 4.3 × 10⁴ 1 mol^?1 cm^?1. The present method is applied for the analysis of zirconium in standard samples.     

Rapid Extraction Spectrophotometric Determination of Platinum Using Anisaldehyde-4-Phenyl-3-Thiosemicarbazone as a Chromogenic Reagent

Abstract

The synthesis, spectral characteristics and analytical applications of anisaldehyde-4-phenyl-3-thiosemicarbazone (APT) are described. A simple, rapid, selective and sensitive spectrophotometric method for the determination of platinum was developed based on the colour reaction between platinum (IV) and anisaldehyde-4-phenyl-3-thio-semicarbazone (APT) in the pH range 1.7 - 3.0. The yellow coloured species has an absorption maximum at 360 nm. The complexation is complete within 1 min. A five-fold excess of the reagent is required for complete complex formation. Beer's law is obeyed over the concentration range 0.1 -20 ppm of Pt(IV). The mtilar absorptivity and Sandell's sensitivity are 1.58 × 10⁴ l. mol^?1 cm^?1 and 0.0123 ug of Pt(IV) cm^?2, respectively. The effects of pH, time concentration of reagent, order of addition of reagents and the interference from various ions were investigated. The method has been employed for the determination of platinum in synthetic mixtures whose composition correspond to some alloys.     

Novel Method for Selective Spectrophotometric Determination of Titanium(IV) with Water Extract of Slippery Elm Leaf as a New Reagent

Abstract

A novel spectrophotometric method for the determination of titanium(IV) by using a new reagent, water extract of slippery elm leaf is developed. In 0.05 M hydrochloric acid, titanium(IV) reacts with this reagent to form a yellow product. The formed product shows maximum absorbance at 415 nm with a molar absorptivity value of 0.68×10⁴ l mol^–1 cm^–1 and the method was linear in the 0.2–6 µg ml^?1 concentration range. The detection limit value was found to be 0.0131 µg ml^?1. The proposed method was simple, low cost, selective, and sensitive. It was applied to the analytic samples with satisfactory results.     

Extraction,Spectrophotometric, and Atomic Absorption Spectrophotometric Determination of Selenium With N-Phenylbenzohydroxamic Acid

Abstract

Solvent extraction spectrophotometric and atomic absorption spectrophotometric methods for the determination of selenium(IV) in microgram quantities are described. The selenium(IV) forms yellow colored complex with N-phenylbenzohydroxamic acid (PBHA) extractable into chloroform from 7 M HClO₄. Se-PBHA complex has maximum absorbance at 345 nm with a molar absorptivity 1.5 × 10⁵ 1 mol^?1 cm^?1 and Sandell's sensitivity 0.000526 μg /cm². Effect of molarity, reagent concentration, diverse ions on the extraction of selenium complex were studied. The selenium is determined in presence of tellurium.     

Rapid and Sensitive Spectrophotometric Determination of Hafuium(IV) With 2-(5-Bromo-2-Pyridylazo)-5-Diethylaminophenol

Abstract

Hafnium(IV) reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in the pH range 3.3–11.0 to yield a sparingly soluble red-coloured chelate that can be dissolved with Triton X-100. Effect of initial pH of metal ion and order of addition of reagents was studied in detail. The 1:3 complex adheres to Beer's law over the concentration range 0.02–1.12 μg/ml of Hf(IV), has a molar absorptivity 1.33x10⁵ 1 mol^?1cm^?1, Sandell sensitivity 1.3 ng cm^?2, formation constant (log K) 11.94 and the method had a relative standard deviation of ± 1.5%. Effect of 60 diverse ions on the determination of hafnium(IV) was studied. This fairly selective method is the most sensitive so far reported for the spectrophotometric determination of hafnium(IV).     

Extractive Spectrqphotometric Determination of Vanadium Liith o-Aminobenzo-Hydroxamic Acid

Abstract

A new spectrophotometric method for vanadium determination is proposed. The method is based on the extraction in Adogen-toluene solution of the complex formed between V(V) and o-Aminobenzohydraxámic acid

The method allows determination of 50 to 110 μg of V(V). The error and the apparent molar absorptivity are 1.2% and 5.2 ± 10³ l.mol^?1. cm^?1 respectively. The interferences caused by foreign ions have been established. The method is applied with success to determination of vanadium in petroleum crudes.     

Extract-Photometric Determination of Vanadium with Isophthaldihydroxamic Acid

Abstract

The spectrophotometric study of violet complex isophthaldihydroxamic acid-vanadium extracted into solution of trioctylmethylammonium chloride in ethylacetate was made (λ_max = 380 nm, ? = 7500 l.mol^?1.cm^?1; λ_max = 510 nm, ? = 5510 l.mol^?1 .cm^?1; stoichiometries, 1:1 and 1:2, V:reagent). A new method for the extract-spectrophotometric determination of V(V) in the range 14–80 μg of vanadium is proposed.     

Selective determination of selenium(IV) from environmental samples by UV-visible spectrophotometry using O-methoxyphenyl thiourea as a chelating ligand

A selective extraction–spectrophotometric method has been developed for determination of selenium(IV) using O-methoxyphenyl thiourea (OMePT) as a chelating agent. The basis of the proposed method is the spectrophotometric determination of selenium(IV)–OMePT complex obtained after extraction of selenium(IV) from 3.5 M hydrochloric acid media using OMePT in chloroform solvent. The complex shows maximum absorbance at 350 nm against the reagent blank. The Beer’s law was obeyed over the concentration range 5–60 µg mL^?1 of selenium(IV). The optimum concentration range was 20–50 µg mL^?1 as evaluated from Ringbom’s plot. The molar absorptivity and Sandell’s sensitivity of the selenium(IV)–OMePT complex in chloroform were 3.312 × 10² L mol^?1cm^?1 and 0.2384 µg cm^?2, respectively. The composition of selenium(IV)–OMePT complex was 1:2 established from slope ratio method, mole ratio method and Job’s continuous variation method. The complex was stable for more than 72 h. The interfering effect of various foreign ions was studied and suitable masking agents were used wherever necessary to enhance the selectivity of the developed method. The proposed method was successfully applied for the determination of selenium(IV) from real samples, viz. pharmaceutical formulations, shampoo, vegetable sample, synthetic mixtures and environmental samples. Repetition of the method was checked by finding the relative standard deviation (RSD) for 10 determinations which was 0.35%.     

Spectrophotometric Determination of Palladium by the New Chromogenic Reagent N-Butyl - N'-(Sodium P-Aminobenzenesulfonate) Thiourea

Abstract

A highly sensitive spectrophotometric method for determination of palladium by the new chromogenic reagent (BPT) has been developed. In the presence of cetyltrimethylammonium bromide(CTMAB), palladium reacts with BPT to form a stable yellow complex in HAc-NaAc buffer solution of pH 4.6-5.6 at 294.4 nm with a molar absorptivity of 2.46 x 10⁵ l mol^?1 cm^?1. The method is simple, rapid and sensitive. Trace amounts of palladium in mineral and catalyst samples have been satisfactorily determined by the method.     

Solvent extraction and spectrophotometric determination of titanium(IV) with 3-phenyl-3-methyl-2-mercaptopropenoic acid

The distribution equilibria of 3-phenyl-3-methyl-2-mercaptopropenoic acid (PhMMP) and the titanium(IV)-PhMMP complex have been studied. An extraction-photometric method for the determination of microamounts of titanium has been developed. We have investigated the influence of pH, the reagent, and the presence of electrolytes and masking agents in the aqueous phase on the equilibrium. From the slope analysis of the distribution curves the composition of the extracted species has been found to be Ti(OH)₂(HR)₂. The complex is extracted quantitatively. Beer's Law is followed over the range 0.09–3.74 μg ml^?1 of titanium(IV), the molar absorptivity is 1.65 × 10⁴ liters mol^?1 cm^?1, and the Sandell sensitivity is 2.8 ng cm^?2 at 439 nm. This method has been applied to the determination of titanium in a bauxite.     

Spectrophotometric Determination of Cobalt in Vitamin Preparations,Steel and Iron Using 2-Hydroxy- 1-Naphthaldehyde Guanylhydrazone

Abstract

A new spectrophotometric determination of cobalt with 2-hydroxy-1-naphthaldehyde guanylhydrazone in acid medium is described. The method is developed on the basis of a yellow cobalt (III) complex (molar absorptivity 1.32×10^?4 L.mol^?1.cm^?1 at 416 nm, stoichiometry 2:1). The method was applied to the determination of cobalt in vitamin preparations, steel and high-purity iron.     

2-(2-Thiazolylazo)-pcresol (TAC) as a reagent for the spectrophotometric determination of titanium (IV)

The reaction between titanium(IV) and 2-(2-thiazolylazo)-p-cresol-(TAC) in aqueous methanol media at apparent pH 4.0–5.6 results in a intensely coloured complex that is stable for at least 2 h. The combining ratio is 1 1 cation TAC. Beer's law is obeyed up to 5.0 g/ml titanium(IV) at 580 nm. The apparent molar absorptivity at 580 nm is 9.82.10³ l.mole^–1.cm^–1 and the detection limit obtained was 5 ng/ml titanium (IV). A spectrophotometric method for the simultaneous determination of titanium and iron with TAC is proposed.     

Rapid and selective determination of osmium(IV) by UV-visible spectrophotometry using o-methylphenyl thiourea as a chromogenic chelating ligand: sequential separation of osmium(IV), rhodium(III) and platinum(IV)

The objective of this research work was to develop a simple, highly sensitive and precise method for spectrophotometric determination of osmium(IV). O-Methylphenyl thiourea (OMPT) coordinates with osmium(IV) as a 1:1 (osmium(IV)–OMPT) complex in hydrochloric acid media (0.8 mol l^?1). The novelty of the investigated method is instant complex formation at room temperature with no need of heating or standing. The complex is stable for more than 8 days. The method is applicable over a wide linearity range (up to 110 µg ml^?1). A low reagent concentration is required (2 ml, 0.009 mol l^?1 in ethanol). The complex exhibits maximum absorption in the range of wavelength 510–522 nm and 514 nm was selected for further study. The molar absorptivity was 1.864 × 10³ l mol^?1 cm^?1, Sandell’s sensitivity was 0.102 µg of osmium(IV) cm^?2. Proposed method was successfully applied for separation and determination of osmium(IV) from binary and ternary synthetic mixtures containing associated metal ions. A scheme for mutual separation of osmium(IV), rhodium(III) and platinum(IV) is developed.     

Catalytic Spectrophotometric Determination of Titanium(IV) Using Methylene Blue‐Ascorbic Acid Redox Reaction

A highly selective and sensitive catalytic method for the determination of trace amounts of titanium(IV) was developed. The method is based on the catalytic effect of titanium(IV) on the methylene blue‐ascorbic acid redox reaction. The reaction was followed spectrophotometrically by measuring the change in absorbance of methylene blue at 665 nm, 5 minutes after the initiation of the reaction. In this study experimental parameters were optimized and the effect of the presence of various cations and some anions on the determination of titanium(IV) was examined. The calibration graph was linear in the range of 3‐25 ng mL^?1 of titanium(IV). The relative standard deviation for the determination of 10 and 20 ng mL^?1 of titanium(IV) were 2.64% and 1.51%, respectively (n = 8). The detection limit calculated from three times of standard deviation of blank 3S_b was 0.6 ng mL^?1. The method was successfully applied to the determination of titanium(IV) in tap water and ore samples.     

Spectrophotometric Determination of Trace Amounts of Titanium in Geochemical and Metallurgical Samples

Abstract

The reaction between cyclohexan-1,2-dione bissalicyloylhydrazone and titanium(IV) has been studied spectrophotometrically. An orange complex (λ = 470 nm, ? = 1.49 × 10⁴ 1.mol^?1.cm^?1) is quickly formed at pH 1–2.5 in a 3+2 V/V ethanol/water medium. Interferences (more than 65 species) have been investigated. In presence of some masking agents most of metal ions do not interfere. The orange complex has been satisfactorily used for the determination of titanium in amphibolites, granites, suspended matter, Portland cement, bauxite, cast iron and duraluminium alloy. The results are compared with those obtained using AAS and ICP methods.     

Spectrophotometric Determination of Vanadium in Complex Materials Using N-m-TMBHA and Thiocyanate

Abstract

Vanadium(V) reacts with N-m-Tolyl-p-methoxy benzohydroxamic acid to form 1:2 (metal to ligand) complex containing a basic V=O group and an acidic V-OH group, which forms addition compounds with thiocyanate to give a hyper and bathochromic effect in chloroform. On the basis of this bathochromic effect of thiocyanate a rapid, selective and sensitive method for the spectrophotometric determination of vanadium(V) has been developed. The blue coloured complex of vanadium(V) is extractable in chloroform having absorption maxima at 580nm and max 7100 ±50 1. mole^?1 cm^?1. The method is free from interferences of Mo(VI), W(VI), Zr(IV) and has been successfully applied for the analysis of steels and other complex materials.     

Analytical applications of mixed-ligand complexes: II. Determination of hydrogen peroxide in the presence of perioxide derivatives

The mixed ligand complex TiXOH₂O₂ was found suitable for the determination of small amounts of hydrogen peroxide in the presence of peroxy acids of sulfur. The pH optimum for the determination depends on the concentrations of the reagents [titanium (IV) and xylenol orange]: for 2 × 10^?4M titanium (IV) and XO the optimum pH is 1.25. ?⁵²⁰ = 13,200 M^?1 cm^?1. The method is suitable for determination of 4–40 μM H₂O₂. Mention is made of the possible causes of the contradictions to be found in the literature concerning the ternary complex.     

Spectrophotometric determination of platinum with substituted pyrimidine-2-thiol

The yellow complex of Pt(IV) with 1-pyridyl-4,4,6-trimethyl-1H,4H-pyrimidine-2-thiol (PyTPT) which has maximum absorbance at 430 nm, is studied for the spectrophotometric determination of the metal. Molar absorptivity is 5000 liters mol^?1 cm^?1 and Sandell's sensitivity is 0.039 μg/cm². The determination of Pt(IV) (2.8–8.4 ppm) in the presence of diverse ions is described.