A Pretreatment Method for GC–MS Determination of Endocrine Disrupting Chemicals in Mollusk Tissues

Automatic soxhlet extraction followed by silica gel cartridge cleanup process was developed as a pretreatment method for GC–MS determination of seven endocrine disrupting chemicals in mollusk tissues. Operation parameters including extraction time, adsorption flow rate and elution flow rate were optimized as 140 min, 2 mL min^?1 and 2 mL min^?1, respectively. Thirty percent dichloromethane in n-hexane and 70% dichloromethane in n-hexane were used as elution solvents in turn. Recovery rates were 93.7, 91.7, 84.5, 83.3, 88.4, 81.2, and 79.7% for nonylphenols (NPs), bisphenol A (BPA), 17α-ethynylestradiol (EE2), estrone (E1), 17α-estradiol (17α-E2), 17β-estradiol (E2), and estriol (E3), respectively. Acceptable relative standard derivations ranged from 8.5 to 12.1%. Method detection limits ranged from 0.27 to 0.68 ng g^?1 dry weight (dw), and quantitative detection limits ranged from 0.62 to 1.26 ng g^?1 dw. The method was successfully applied to five mollusk species in Dapeng Bay of China to verify its practicability, and NPs, BPA, EE2, E1 and 17α-E2 were detected in the range from 1.6 to 131.5 ng g^?1 dw.     

Level of Polychlorinated Biphenyls in Marine Environment of Algiers Bay,Algeria

Polychlorinated Biphenyls (PCBs) are persistent organic pollutants with significant bioaccumulation in the global environment. Owing to their high toxicity and lipophilic property, PCBs are potential threat to the human and ecological system.

The objective of this work was to investigate the polychlorinated biphenyls in seawater and blue mussels Mytilus galloprovincialis collected in the eastern coastal side of the Algiers bay. Surface and bottom water samples were collected at six different periods from July to October 2002 in the port of Tamentfoust and four locations around the port. Mussel samples were collected from Tamentfoust port and Surcouf beach. After extraction, the PCBs levels were determined in marine water and biological samples by gas chromatography with electron capture detector. Total polychlorinated biphenyls concentrations varied from 4.0 to 18.8 ng · L^?1 in surface and from 4.4 to 16.6 ng · L^?1 in bottom seawater and were relatively high in August (30th and 45th days).

In mussels that concentrate the organochlorinated compounds in their tissues, the sum of ICES 7 PCBs concentrations was relatively high. It ranged from 64.2 to 185.8 ng · g^?1 dw (average 125.8 ng · g^?1 dw) in samples collected from Surcouf. The level of contamination in Tamentfoust port mussels was about twice higher (225.2 ng · g^?1 dw).

The observed PCBs distribution was close to that of common commercial mixture and suggests an industrial origin of this pollution emitted from a continental source in addition to the port activities. Although the use of target compounds has been banned for more than three decades, they are still persistent in Algiers Bay.     

Simultaneous Determination of Fluoroquinolones and Sulfonamides in Chicken Muscle by LC with Fluorescence and UV Detection

A simple, rapid and sensitive liquid chromatographic method with programmable fluorescence and ultraviolet detection was developed and validated for simultaneous determination of seven fluoroquinolones (marbofloxacin, ofloxacin, ciprofloxacin, lomefloxacin, danofloxacin, enrofloxacin and difloxacin) and four sulfonamides (sulfadiazine, sulfapyridine, sulfathiazole and sulfadimidine) in chicken muscle in a single run. The tissue sample was extracted with phosphate buffer (pH 6.0) and cleaned-up with a solid phase extraction cartridge. The mean recoveries for each drug in chicken muscle ranged from 78.0 to 105.2% with a relative standard deviation below 9.3% at 0.2–400 ng g^?1 fortification levels. The limit of quantification was 0.2–4.0 ng g^?1 for fluoroquinolones and 15.0 ng g^?1 for sulfonamides.     

Trace analysis of benzophenone-derived compounds in surface waters and sediments using solid-phase extraction and microwave-assisted extraction followed by gas chromatography–mass spectrometry

This study describes a procedure for determining eight benzophenone-derived compounds in surface waters and sediments. These include the pharmaceutical ketoprofen, its phototransformation products 3-ethylbenzophenone and 3-acetylbenzophenone, and five benzophenone-type ultraviolet (UV) filters. The proposed analytical method involves the pre-concentration of water samples by solid-phase extraction (SPE) and microwave-assisted extraction (MAE) of sediment samples followed by derivatization and analysis by gas chromatography–mass spectrometry. Different parameters were investigated to achieve optimal method performance. Recoveries of 91 to 96 % from water samples were obtained using HLB Oasis SPE cartridges, whereas MAE of sediments (30 min at 150 °C) gave recoveries of 80 to 99 %. Limits of detection were between 0.1 and 1.9 ng L^?1 for water samples and from 0.1 to 1.4 ng g^?1 for sediment samples. The developed method was applied to environmental samples and revealed the presence of UV filters in the majority of the surface waters with up to 690 ng L^?1 of 2-hydroxy-4-methoxybenzophenone. By contrast, ketoprofen (≤2,900 ng L^?1) and its degradation products (≤320 ng L^?1) were found in only two rivers, both receiving wastewater treatment plant effluents. Sediment analysis revealed benzophenone to be present in concentrations up to 650 ng g^?1, whereas concentrations of other compounds were considerably lower (≤32 ng L^?1). For the first time, quantifiable amounts of two ketoprofen transformation products in the aqueous environment are reported.     

Analysis of Six Phenolic Endocrine Disrupting Chemicals in Surface Water and Sediment

An efficient and reliable method based on gas chromatography–mass spectrometry (GC–MS) was developed for the extraction and analysis of six phenolic endocrine disrupting chemicals (EDCs), such as 4-nonylphenol (4-NP), nonylphenol-mono-ethoxylate (NP1EO), nonylphenol-di-ethoxylate (NP2EO), 4-tert-octylphenol (4-t-OP), bisphenol A (BPA) and 4-cumylphenol (4-CP) in surface water and sediment. The method was developed by using microwave-assisted extraction (MAE), solid phase extraction (SPE) and derivatization procedure. The MAE procedures were performed by optimizing three key process factors, consisted of extraction solvent, extraction temperature and holding time, affecting the extraction efficiency from sediment samples. For SPE, various parameters that may affect the recovery efficiency of water samples, such as SPE phase cartridge, elution solvent, as well as pH of water samples, were investigated. A series of derivatization conditions, such as derivatization reagent, reaction temperature and reaction time, were improved. The method achieved good repeatability and reproducibility with relative standard deviations <13% for all target EDCs in the both samples. Satisfactory recoveries for spiked water and sediment samples ranged from 85 to 101% and 74 to 105%, respectively. The limits of quantification varied from 0.20 (4-t-OP) to 11.50 ng L^?1 (NP2EO) and from 0.31 (4-t-OP) to 9.50 ng g^?1 dry weight (dw) (NP2EO) for water samples and sediment samples, respectively. The established method was successfully applied to the analysis of target EDCs in surface water and sediment samples collected from Caohai site of Dianchi Lake, China. The results showed that NP1EO, NP2EO and BPA were the three dominant phenolic EDCs in the site, reaching 114, 97 and 149 ng L^?1 in surface water, while 444, 186 and 178 ng g^?1 dw in surface sediment, respectively.     

Determination of Triazine Herbicides and Diuron in Mud from Olive Washing Devices and Soils Using Gas Chromatography with Selective Detectors

Abstract

In the present work, a method for the simultaneous determination of five herbicides, diuron, simazine, atrazine, terbuthylazine and terbutryn by GC‐electron capture detection (ECD) and GC‐thermoionic specific detector (TSD) in soil and mud samples (from olives washing devices) has been developed. Extraction of the herbicides from soil samples was carried out by liquid–solid extraction with ciclohexane/acetone under sonication. In addition, a clean‐up step by solid phase extraction (SPE) using alumina was necessary for mud samples to remove fat residues in the extracts. Spiked soil standards were used for calibration. Limit of detection (LOD) values ranged between 0.2–1.4 ng g^?1 and limit of quantitation (LOQ) between 1.4–2.0 ng g^?1. The precision of the method was satisfactory for all the herbicides analyzed, with RSD values ranging between 7.5%–32.3% and 8.5%–17.8% for 10 and 100 ng g^?1 spiking levels, respectively. The accuracy of the method was checked at three spiking levels (10, 50, and 100 ng g^?1) with recovery values ranging from 74.2%–129.1%. In the case of mud samples, mean recovery values (100 ng g^?1 spiking level) were acceptable for diuron (69.5%) and more satisfactory in the case of triazine herbicides (81.0%–123.0%). Diuron and terbuthylazine were the herbicides most frequently detected in the analyzed samples.     

Development of Immunoaffinity Sample-Purification for GC–MS Analysis of Ractopamine in Swine Tissue

A method combining immunoaffinity chromatography with gas chromatography–mass spectrometry (GC–MS) has been established for determination of ractopamine residues in swine liver and urine. After clean-up on an immunoaffinity chromatography column, GC–MS analysis revealed recovery from blank swine liver and urine fortified at 2.5–20 ng g^?1 (ng mL^?1 for urine), respectively, was 68.2–78.6 and 76.2–83.1%. The limits of detection and quantification were 0.5 ng g^?1 (or ng mL^?1) and 2.0 ng g^?1 (or ng mL^?1), respectively. The procedure was used for analysis of ractopamine residues in samples of swine liver and urine in which the levels were unknown. The amounts detected were 9–216 ng g^?1 (ng mL^?1).     

Determination of Biogenic Amines in Cheese Using Simultaneous Derivatization and Microextraction Method Followed by Gas Chromatography–Mass Spectrometry

Microwave-assisted extraction and dispersive liquid–liquid microextraction followed by gas chromatography–mass spectrometry as a sensitive and efficient method was applied to extract and determine four biogenic amines (BAs) in Iranian Lighvan cheese samples. Carrez solutions were used for the sedimentation of proteins. Effective factors on the performance of microextraction were studied and optimized. The proposed method showed good linear ranges from 5 to 500 ng mL^?1, with the coefficients of determination higher than 0.9929. Average recoveries were between 97 and 103%. Limits of detection for all analyzed BAs ranged from 5.9 to 14.0 ng g^?1, and limits of quantitation ranged between 19.7 and 46.2 ng g^?1. Compared with previous methods, the proposed method is simple, fast, accurate, and precise and gives low detection limits for investigating trace amounts of BAs in Iranian Lighvan cheese samples. The levels of four BAs were determined in five Lighvan cheese samples. Cadaverine was found as prevailing amine in the cheese samples. Putrescine, tyramine, and histamine were present at the second, third, and fourth highest levels, respectively.     

Determination of Two Pesticides in Soils by Dispersive Liquid–Liquid Microextraction Combined with LC-Fluorescence Detection

In the present work, a simple, rapid and sensitive sample pre-treatment technique, dispersive liquid–liquid microextraction (DLLME) coupled with liquid chromatography-fluorescence detection (LC-FLD), has been developed to determine carbamate (carbaryl) and organophosphorus (triazophos) pesticide residues in soil samples. Methanol was first used as extraction solvent for the extraction of pesticides from the soil samples and then as dispersive solvent in the DLLME procedure. Under the optimum extraction conditions, the linearity was obtained in the concentration range of 0.1–1,000 ng g^?1 for carbaryl and 1–5,000 ng g^?1 for triazophos, respectively. Correlation coefficients varied from 0.9997 to 0.9999. The limits of detection (LODs), based on signal-to-noise ratio (S/N) of 3, ranged from 14 to 110 pg g^?1. The relative standard deviation (RSDs, for 20.0 ng g^?1 of each pesticide) varied from 1.96 to 4.24% (n = 6). The relative recoveries of two pesticides from soil A1, A2 and A3 at spiking levels of 10.0, 20.0 and 50.0 ng g^?1 were in the range of 88.2–108.8%, 80.8–110.7% and 81.0–111.1%, respectively. The results demonstrated that DLLME was a sensitive and accurate method to determine the target pesticides, at trace levels, in soils.     

LC Determination of Nosiheptide in Swine Kidney and Liver

A liquid chromatographic method was developed for determination of nosiheptide in swine kidney and liver. The tissue samples were extracted with acetonitrile and defatted with hexane. The analytes were determined at a fluorescence excitation/emission wavelength of 357/515 nm and with gradient elution program. The limits of detection and limits of quantification were 5 and 20 ng g^?1, respectively, for swine kidney and liver. The mean recoveries for nosiheptide in swine kidney and liver ranged from 70.3 to 97.4% with coefficients of variation below 11.3% at 20–100 ng g^?1 fortification levels.     

Determination of Three Nonsteroidal Anti-Inflammatory Drugs in Human Plasma by LC Coupled with Chemiluminescence Detection

A simple and sensitive method was developed for the determination of three nonsteroidal anti-inflammatory drugs (NSAIDs)—ibuprofen, naproxen and fenbufen in human plasma. The method involved in column liquid chromatographic separation and chemilumenescence (CL) detection based on the CL reaction of NSAIDs, potassium permanganate (KMnO₄) and sodium sulfite (Na₂SO₃) in sulfuric acid (H₂SO₄) medium. The chromatographic separation was carried out using a reversed-phase C₁₈ column, which allowed the selective determination of the three medicines in the complicated samples. The special features of the CL detector provided lower LOD for determination than that of existing chromatographic alternatives. The results indicated that the linear ranges were 0.01–10.0 μg mL^?1 for ibuprofen, 0.001–1.0 μg mL^?1 for naproxen, and 0.01–10.0 μg mL^?1 for fenbufen. The limits of detection were 0.5 ng mL^?1 for ibuprofen, 0.05 ng mL^?1 for naproxen and 0.5 ng mL^?1 for fenbufen (S/N = 3). All average recoveries were in the range of 90.0–102.3%. Finally, the method had been satisfactorily applied for the determination of ibuprofen, naproxen and fenbufen in human plasma samples.     

A Validated Method for the Determination of Neonicotinoid,Pyrethroid and Organochlorine Residues in Human Milk

Exposure to pesticides in the environment is sensitively indicated by the concentration of these chemicals in human milk. However, to the best of our knowledge, detection methods in human milk for the relatively new class of pesticides, neonicotinoids, are yet to be validated. We developed a method of detection of neonicotinoids in human milk, together with two other classes of pesticides, pyrethroids and organochlorines. Neonicotinoids and pyrethroids are emerging pesticides that are replacing older and more persistent chemicals such as organochlorines. We optimized a procedure for extraction of these chemicals from whole milk and report our solutions to the problems of interference by co-extracted substances. The clean-up method was optimized using a minimum amount of PSA (50 mg) and MgSO₄ (150 mg). This was followed by GC–MS/MS analysis (for organochlorines and pyrethroids) and LC–MS/MS (for neonicotinoids). The method was validated following SANTE/11945/2015 guidelines at concentrations 10, 20 and 100 ng g^?1. Limits of quantification were obtained at ≤ 2 ng g^?1 for all pesticides and lowest validated level were 10 ng g^?1, with measurement uncertainty between 0.47 and 2.6 ng g^?1. Average recovery ranged from 84 to 102% and for most compounds was found to be more satisfactory than the original QuEChERS, AOAC 2007.01 acetate buffer method and modified QuEChERS methods. The relative standard deviation was less than 16%. The method was successfully utilized for the analysis of human milk samples from Nadia, West Bengal and was found positive for organochlorines and negative for neonicotinoids and pyrethroids.     

Trace-level determination of pyrethroid,neonicotinoid and carboxamide pesticides in beeswax using dispersive solid-phase extraction followed by ultra-high-performance liquid chromatography-tandem mass spectrometry

The aim of the work was to develop an analytical procedure able to quantify traces of 13 neonicotinoids and pyrethroids as well as carboxamide in beeswax at low levels (ng g^?1) to evaluate the contamination. For this purpose, an efficient sample preparation procedure was developed based on solid–liquid extraction using dispersive diatomaceous earth and acetonitrile. This step was followed by a selective and sensitive analysis based on ultra-high-performance liquid chromatography coupled to tandem mass spectrometry (ESI-MS/MS). This analytical procedure was validated based on International Conference on Harmonization guidelines. The limits of quantification ranged from 1 ng g^?1 (thiamethoxam, clothianidin, imidacloprid, acetamiprid, thiacloprid and boscalid) to 40 ng g^?1 (lambda-cyhalothrin). The method was then successfully applied to 60 samples of beeswax collected in several areas of France. The presence of thiacloprid, boscalid, imidacloprid and deltamethrin in beeswax was confirmed. The most frequently quantified pesticide was boscalid.     

Determination of Danofloxacin and Marbofloxacin in Milk Samples by Micellar Liquid Chromatography with Fluorescence Detection

Abstract

A simple, rapid, and sensitive analytical method has been developed for the determination of two fluoroquinolones, danofloxacin and marbofloxacin, in bovine milk samples. Separation and quantification were performed by micellar liquid chromatography with fluorescence detection (MLC?FD), using sodium dodecyl sulfate (SDS) as a surfactant. The influence of the principal factors, namely, the micelle concentration, the amount of organic modifier, tail‐reducing agents, the pH, and the temperature were studied. The suitable condition was found to be 75 mM SDS?10 mM phosphate buffer–18 mM tetrabutylammonium bromide/3% (v/v) 1‐propanol at pH 3.0 for the separation of marbofloxacin, danofloxacin, and tosufloxacin (internal standard) in about 20 min. The linear concentration range of application was 1.8–30.0 ng · mL^?1 for danofloxacin and 16–120 ng · mL^?1 for marbofloxacin, and the relative standard deviation ranged between 4.9 and 2.7%. The limit of detection found for danofloxacin was 0.5 ng · mL^?1 and 5 ng · mL^?1 for marbofloxacin. These values were lower than the maximum residue limits (MRLs) established by the European Union for these compounds in bovine milk. It was applied to check the eventual existence of these compounds above these limits on commercial milk samples. The validation method was completed with spiked milk samples. Recovery levels obtained were 90.3–108.2%.     

Simultaneous determination of ten anticoagulant rodenticides in tissues by column-switching UHPLC-ESI-MS/MS

This paper describes the development of a method for the simultaneous determination of ten anticoagulant rodenticides (coumafuryl, warfarin, pindone, coumatetralyl, coumachlor, difenacoum, bromadiolone, brodifacoum, chlorophacinone and flocoumafen) in the liver and kidney based on column-switching liquid chromatography coupled with heated electrospray ionization tandem mass spectrometry. The simple sample preparation includes extraction with methanol. A C₁₈ trapping column was used for online solid-phase extraction before analytical separation with the mobile phase comprising a mixture of 0.1 % formic acid in water, methanol and acetonitrile. Chromatographic separation was achieved using a Thermo Hypersil ultra high-performance liquid chromatography (UHPLC) C₁₈ column with the mobile phase consisting of 5 mM ammonium formate buffer (pH?=?9) and methanol. The column-switching procedure ensured no matrix effects during electrospray ionization (ESI). Extraction recoveries ranged between 91 and 100 % for liver and between 89 and 97 % for kidney. The method showed good linearity up to 750 ng g^?1. The limit of detection ranged between 0.001 and 0.022 ng g^?1 for liver and between 0.001 and 0.028 ng g^?1 for kidney. The developed method was successfully used in several animal poisoning cases.     

Ultrasensitive direct determination of BTEX in polluted soils using a simple and novel pressure-controlled solid-phase microextraction setup

A pressure-controlled headspace solid-phase microextraction (PC-HS-SPME) setup was developed, by reconsidering the strengths and weaknesses points of the similar reported systems. The new setup was coupled with gas chromatography–flame ionization detection (GC–FID) for direct analysis of benzene, toluene, ethylbenzene and xylene (BTEX) in contaminated soils, without any sample preparation step. The important experimental factors, affecting the performance of the method, including volumes of extraction and vacuum vials, type of SPME fiber, extraction time and temperature, moisture content of the sample, and sonication time were studied and optimized. Under the optimal conditions, good linearity of the calibration curves (R² > 0.997) was obtained in the concentration range of 0.1–20,000 ng g^?1. The limits of detections were found to be 0.001–0.08 ng g^?1. The relative standard deviations, for six repetitive analyses of 100 ng g^?1 BTEX, were obtained to be 5.7–12.3%. The PC-HS-SPME–GC–FID procedure was successfully applied for the extraction and determination of BTEX in the polluted soil samples.     

Optimization of Sample Preparation of Carrot-Fruit Juice for Determination of Antimony,Arsenic, and Selenium by Hydride Generation-Inductively Coupled Plasma Optical Emission Spectrometry

Sample preparation procedures for the determination of As, Sb, and Se in carrot-fruit juice by hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP OES) were examined. The applicability of a partial decomposition using aqua regia and simple dilution with a 2% (v/v) HNO₃ solution were tested and compared to a traditional treatment based on the wet digestion with a HNO₃/H₂O₂ mixture. The pre-reduction and hydride generation reaction conditions were evaluated. Under the optimal conditions, the hydrides were produced in the reaction of an acidified sample with NaBH₄ after pre-reduction with ascorbic acid [0.5% (m/v)] and KI [0.5% (m/v)] in 3 mol L^?1 HCl for total As and Sb, and boiling with HCl (6 mol L^?1) for total Se. The best results were obtained for the aqua regia procedure, resulting in limits of detection (LODs) between 1.2–2.4 ng g^?1 in the samples and recoveries from 90.9% to 109.1%. The method was successfully applied (without matrix effects) for the determination of As in dense mousse and pulp juice samples and for Sb in pulp juices. Standard solutions, processed in the same way as samples, were used for the calibration. Undecomposed matrix constituents strongly influenced Se; hence this element was determined using the method of standard addition. Concentrations of studied elements in analyzed products were at the trace level, that is, 6–32 ng g^?1, 4–10 ng g^?1, and 4–13 ng g^?1 for Se, As, and Sb, respectively.     

Determination of Pantoprazole, Rabeprazole, Esomeprazole, Domperidone and Itopride in Pharmaceutical Products by Reversed Phase Liquid Chromatography Using Single Mobile Phase

A simple, sensitive, and precise high performance liquid chromatographic method for the analysis of pantoprazole, rabeprazole, esomeprazole, domperidone and itopride, with ultraviolet detection at 210 nm, has been developed, validated, and used for the determination of compounds in commercial pharmaceutical products. The compounds were well separated on a Hypersil BDS C18 reversed-phase column by use of a mobile phase consisting of 0.05 M, 4.70 pH, potassium dihydrogen phosphate buffer - acetonitrile (720:280 v/v) at a flow rate of 1.0 mL min^?1. The linearity ranges were 400–4,000 ng mL^?1 for pantoprazole, 200–2,000 ng mL^?1 for rabeprazole, 400–4,000 ng mL^?1 for esomeprazole, 300–3,000 ng mL^?1 for domperidone and 500–5,000 ng mL^?1 for itopride. Limits of detection (LOD) obtained were: pantoprazole 147.51 ng mL^?1, rabeprazole 65.65 ng mL^?1, esomeprazole 131.27 ng mL^?1, domperidone 98.33 ng mL^?1 and itopride 162.35 ng mL^?1. The study showed that reversed-phase liquid chromatography is sensitive and selective for the determination of pantoprazole, rabeprazole, esomeprazole, domperidone and itopride using single mobile phase.     

Rabbit Monoclonal Antibody-Based Lateral Flow Immunoassay Platform for Sensitive Quantitation of Four Sulfonamide Residues in Milk and Swine Urine

Based on the available rabbit monoclonal antibody (RabMAb), a rapid and sensitive lateral flow immunoassay (LFA) platform has been developed for quantitative detection of four sulfonamide residues(SRs) of sulfadiazine (SD), sulfathiazole (STZ), sulfapyridine (SP), and sulfamethoxazole (SMX).Within the designed LFA competitive format assay, which was based on antigen-antibody properties, the hapten conjugate N¹-[4-(carboxymethyl)-2-thiazolyl] sulfanilamide linked to protein ovalbumin (TS-OVA) and goat anti-rabbit antibody were sprayed as capture and control reagents, respectively, and then the antibody was conjugated to colloidal gold particles as the detection reagent. With quantitative assessment aided by a colorimetric strip reader, the sensitivities of the established LFA method for SD, STZ, SP, and SMX were 0.91 ng mL^?1, 0.10ng mL^?1,0.12ng mL^?1, and 2.13ng mL^?1, and the half-maximum inhibition concentrations (IC₅₀) were 5.19 ng mL^?1, 1.25 ng mL^?1, 0.66 ng mL^?1, and 24.14 ng mL^?1, respectively. The recoveries at three spiked levels (5, 20, 50 ng mL^?1for SD, STZ, and SP; 20, 50, 100 ng mL^?1 for SMX) were in the range of 78.02–135.10% and 76.40–137.16% for milk and swine urine, respectively. More importantly, the detection performance of the established platform was consistent with that of in-parallel LC-MS/MS analysis. In conclusion, the proposed LFA platform has showed the potential for fast, sensitive and relatively accurate quantification of four sulfonamide residues in practical uses.     

Determination of Abacavir, Lamivudine and Zidovudine in Pharmaceutical Tablets, Human Serum and in Drug Dissolution Studies by HPLC

A simple, accurate, precise and fully automated method for the simultaneous determination of abacavir, lamivudine and zidovudine in pharmaceutical tablets, human serum samples and drug dissolution studies has been developed. Separation was performed on a 5 μm Zorbax^® C₁₈ column (150 × 4.6 mm ID) with methanol:water:phosphate buffer at pH 5.65 (80:10:10; v/v/v) isocratic elution in less than 7 min with a flow rate of 0.6 mL min^?1.Good sensitivity for all analytes was observed with UV detection at 275 nm. The method allowed quantitation over the 500–3,000 ng mL^?1 range for abacavir and 500–5,000 ng mL^?1 range for lamivudine and zidovudine. The method has been applied, without any interference from excipients or endogenous substances, for the simultaneous determination of these three compounds in tablets. Human serum and drug dissolution studies.