Preparation of candidate certified reference materials for the quality control of EDTA-and acetic acid-extractable trace metal determinations in sewage sludge-amended soil and terra rossa soil

The determination of extractable trace metal contents in soil using single extraction procedures is currently performed in many laboratories to assess the bioavailable metal fraction (and related phytotoxic effects) and the accessability to the environment (e.g. contamination of ground waters). Owing to the need for validation of the extraction schemes used and of the analytical techniques, the EC Measurements and Testing Programme (formerly BCR) has organized a project for improving the quality of determination of extractable trace metal contents in soil, the first step being an interlaboratory study to adopt common extraction procedures and the second being a certification campaign to certify two soils for their extractable trace element contents following these procedures. This paper gives a brief overview of the project organisation and describes the preparation, homogeneity and stability studies of two soil candidate reference materials (sewage sludge-amended and terra rossa soils).     

New Sediment and Soil CRMs for Extractable Trace Metal Content

Abstract

The lack of uniformity in leaching procedures used to measure broadly defined forms of heavy metals does not allow the results to be compared world-wide nor the methods to be validated since the results obtained are “operationally defined”. An attempt was made to certify several mineral soils CRMs for single extraction by using acetic acid, EDTA and DTPA for Cd, Cr, Cu, Ni, Pb and Zn. Recently, to complete the series of soil CRMs, an organically enriched soil was prepared SO25. For sediments a CRM 601 was produced and certified for metals extractable by using the BCR three step sequential extraction. Not all the trace elements were certified and only indicative values were given for some of them due to poor reproducibility. We performed a systematic study of the effect of the variables identified as potential sources of uncertainty in the use of this scheme. With this study the sources of uncertainty were revealed and an optimised version of the protocol was proposed. With this new version it was possible to certify all the trace elements studied. New sediment material S33 is now proposed for certification and additional data are given for the sediment CRM 601. This modified procedure was also applied to a soil CRM 483 and good results were obtained. This procedure may thus be applied to polluted soils.     

Extraction procedures for the determination of heavy metals in contaminated soil and sediment

Extraction tests are commonly used to study the mobility of metals in soils and sediments by mimicking different environmental conditions or dramatic changes on them. The results obtained by determining the extractable elements are dependent on the extraction procedure applied. The paper summarises state of the art extraction procedures used for heavy metal determination in contaminated soil and sediments. Two types of extraction are considered: single and sequential. Special attention is paid to the Standard, Measurement and Testing projects from the European Commission which focused on the harmonisation of the extraction procedures and on preparing soil and sediment certified reference materials for extractable heavy metal contents.     

Improvement of Analytical Measurements within the BCR-Programme: Single and Sequential Extraction Procedures Applied to Soil and Sediment Analysis

Abstract

The determination of extractable trace metal contents in soil and sediment, using respectively single and sequential extraction procedures, is currently performed in many laboratories to assess the bioavailable metal fraction (and related phyto-toxic effects) and the accessability to the environment (e.g. contamination of ground waters).

Owing to the need for validation of the extraction schemes used and of the analytical techniques, the Community Bureau of Reference (BCR) decided to organize a project for the improvement of the quality of determinations of extractable trace metal contents in soil and sediment. The implementation of this project follows a stepwise approach involving feasibility studies, intercomparisons to detect and remove sources of errors in the application of the analytical methods, and the certification of the extractable compounds. This paper describes the organization of the work completed so far (feasibility studies and first intercomparison) and discusses its further development.     

Certified reference materials for the quality control of EDTA- and acetic acid-extractable contents of trace elements in sewage sludge amended soils (CRMs 483 and 484)

 The ecotoxicity and mobility of trace elements in soils are often evaluated through analytical results resulting from operationally-defined determinations (single and sequential extractions), e.g. based on EDTA, acetic acid etc. extractions. The significance and comparability of these results is highly dependent on the procedures used (standardized protocols or standards adopted by international bodies) and their quality control relies on the availability of reference materials certified following these strictly applied procedures. Recognizing the need to harmonize some of the extraction schemes currently used for soil analysis, the Measurements and Testing Programme (formerly BCR) has organized a series of interlaboratory studies, the first aim of which was to evaluate EDTA- and acetic acid-extraction procedures and the second objective was to certify reference materials for their extractable trace element contents. Two sewage amended soils have been prepared for this purpose, originating respectively from Scotland and Catalonia. This paper describes the preparation, homogeneity and stability studies, and gives an overview of the certification campaign. Received: 6 May 1996/Revised: 14 June 1996/Accepted: 27 June 1996     

Single and Sequential Extraction in Sediments and Soils

Abstract

The determination of extractable trace metal contents in soils and sediments is currently performed in many laboratories to assess the bioavailable metal fraction (and related potential phyto-toxic effects) and the importance and possibility of mobilization of trace metals from polluted soil, sludge and sediment upon landfill application. Single and sequential extraction schemes are used for the assessment of the different “forms” of trace metals (e.g. “mobile/bioavailable”, “carbonate-bound” etc.). The lack of uniformity in the different extraction procedures used throughout the world does not allow the results to be compared or the procedures to be validated which has led to many criticisms in the past few years. Moreover, the lack of suitable reference materials for this type of operationally defined determinations did not enable the quality of the measurements to be controlled. Owing to the need for establishing common schemes for single and sequential extractions as well as for the improvement of the quality of extractable trace metal determinations in soil and sediments, the Community Bureau of Reference (BCR) has organised a project which results along with the state of the art of extractable trace metal determinations, use and applicability of extraction schemes and analytical limitations were decided to be thoroughly discussed in a workshop. This paper presents its main conclusions.     

Evaluation of a sequential extraction procedure for the determination of extractable trace metal contents in sediments

The determination of extractable trace metals in sediments using sequential extraction procedures has been performed in many laboratories within the last ten years in order to study environmental pathways (e.g. mobility of metals, bounding states). However, the results obtained by different laboratories could hardly be compared due to lack of harmonized schemes. Owing to the need for standardization and subsequent validation of extraction schemes for sediment analysis, the Measurements and Testing Programme (formerly BCR Programme) of the European Commission has organized a project to adopt a sequential extraction procedure that could be used as a mean of comparison of data of extractable trace metals in sediments. A scheme was designed after a series of investigations on existing schemes and tested in interlaboratory studies. This paper presents the results of two round-robin exercises on extractable trace metals using this sequential extraction protocol and describes the final version of the extraction procedure amended according to the most recent improvements.     

The utilization of modified BCR three-step sequential extraction procedure for the fractionation of Cd, Cr, Cu, Ni, Pb and Zn in soil reference materials of different origins

A modified three-step sequential extraction procedure for the fractionation of heavy metals, proposed by the Commission of the European Communities Bureau of Reference (BCR) has been applied to the Slovak reference materials of soils (soil orthic luvisols, soil rendzina and soil eutric cambisol), which represent pedologically different types of soils in Slovakia. Analyses were carried out by flame or electrothermal atomic absorption spectrometry (FAAS or ETAAS). The fractions extracted were: exchangeable (extraction step 1), reducible-iron/manganese oxides (extraction step 2), oxidizable-organic matter and sulfides (extraction step 3). The sum of the element contents in the three fractions plus aqua-regia extractable content of the residue was compared to the aqua-regia extractable content of the elements in the origin soils. The accuracy obtained by comparing the determined contents of the elements with certified values, using BCR CRM 701, certified for the extractable contents (mass fractions) of Cd, Cr, Cu, Ni, Pb and Zn in sediment following a modified BCR-three step sequential extraction procedure, was found to be satisfactory.     

Trace Metal Speciation and Research in Marine Geochemistry

Abstract

In order to precise the origin and behaviour of trace metals associated with coastal marine sediments, marine geochemists frequently utilize various methods of sequential extraction. The main objective is to test the potential mobility / stability of particulate metals in the natural environments. Several examples are presented in the article, namely: i/ Exchangeable Pb from podzolic soils of the drainage basin of a lagoon which sediments and phreatic waters are for a large part inherited from the surrounding soils; ii/ Evolution of particulate metals in an estuary; iii/ Mobility of metals at the sea bottom interface; iv/ Role of amorphous components of estuarine sediments and suspended matter; v/ Effects of dredging activities on solubility of metals in an estuary; vi/ Behaviour of heavy metals in lagoons.

Main results obtained from the extraction procedures are described, as well as particular difficulties encountered when applying some classical methods.     

Certified reference material for the quality control of EDTA- and DTPA-extractable trace metal contents in calcareous soil (CRM 600)

Single extraction tests are commonly used to study the eco-toxicity and mobility of metals in soils, e.g. to assess the bioavailable metal fraction (and thus to estimate the related phyto-toxic and nutritional deficiency effects) and the environmentally accessible trace metals upon disposal of e.g. sediment on to a soil (e.g. contamination of ground waters). However, the lack of uniformity in the different procedures does not allow the results to be compared worldwide nor the procedures to be validated. This paper describes the interlaboratory testing of EDTA- and DTPA-extraction procedures for soil analysis, followed by the preparation of a calcareous soil reference material (CRM 600), the homogeneity and stability studies and the analytical work performed for the certification of the EDTA- and DTPA- extractable contents of some trace metals (following the standardized extraction procedures). Received: 21 May 1997 / Revised: 4 July 1997 / Accepted: 9 July 1997     

Certified reference material for the quality control of EDTA- and DTPA-extractable trace metal contents in calcareous soil (CRM 600)

Single extraction tests are commonly used to study the eco-toxicity and mobility of metals in soils, e.g. to assess the bioavailable metal fraction (and thus to estimate the related phyto-toxic and nutritional deficiency effects) and the environmentally accessible trace metals upon disposal of e.g. sediment on to a soil (e.g. contamination of ground waters). However, the lack of uniformity in the different procedures does not allow the results to be compared worldwide nor the procedures to be validated. This paper describes the interlaboratory testing of EDTA- and DTPA-extraction procedures for soil analysis, followed by the preparation of a calcareous soil reference material (CRM 600), the homogeneity and stability studies and the analytical work performed for the certification of the EDTA- and DTPA- extractable contents of some trace metals (following the standardized extraction procedures). Received: 21 May 1997 / Revised: 4 July 1997 / Accepted: 9 July 1997     

Ammonium Acetate Extracts and Their Analysis for the Speciation of Metal Ions in Soils and Sediments

Abstract

The use of ammonium acetate (1 mol/l at pH 7) extraction of soils and sediments for the speciation of metal ions is briefly discussed. Because the sensitivity of flame atomic absorption spectrometry (FAAS) is insufficiently sensitive for the determination of many of the heavy metals in ammonium acetate extracts of unpolluted, and even in some polluted soils, the use of electrothermal atomic absorption spectrometry (ETAAS) was studied. A general procedure, using graphite furnace atomisation and the “universal” matrix modifier, palladium, was developed, that was sufficiently sensitive for the determination of Cd, Cr, Cu, Ni, Pb and Zn even in unpolluted soils. The concentration of zinc, however, will almost always be high enough for determination of FAAS and this method is to be preferred to ETAAS for this element.

While, for Cr, Cu, Ni and Pb, direct calibration with external standard solutions is practicable, it is necessary to use the standard additions calibration method for cadmium, to avoid matrix interference effects. The standard additions technique is recommended, however, because it compensates for real differences in the operating parameters of different instruments set to the same nominal values. This is particularly important for interlaboratory comparisons or for certification analyses in the preparation of reference materials.     

Operationally defined extraction procedures for soil and sediment analysis: II. Certified reference materials

Single or sequential extraction procedures are often used for soil and sediment studies to determine forms or phases of elements (e.g. `bioavailable' forms of elements). The significance of the analytical results is highly dependent on the extraction procedures used, owing to the `operationally defined' character of these schemes which requires the adoption of standardized protocols. The first part of the present review discusses the aspects of standardization of leaching and extraction schemes as applied to environmental analysis. This second part focuses on the validation aspects of such procedures and describes the preparation and certification of soil and sediment reference materials certified for their extractable trace element contents, following standardized single and sequential extraction procedures.     

Operationally defined extraction procedures for soil and sediment analysis: II. Certified reference materials

Single or sequential extraction procedures are often used for soil and sediment studies to determine forms or phases of elements (e.g. ‘bioavailable' forms of elements). The significance of the analytical results is highly dependent on the extraction procedures used, owing to the ‘operationally defined' character of these schemes which requires the adoption of standardized protocols. The first part of the present review discusses the aspects of standardization of leaching and extraction schemes as applied to environmental analysis. This second part focuses on the validation aspects of such procedures and describes the preparation and certification of soil and sediment reference materials certified for their extractable trace element contents, following standardized single and sequential extraction procedures.     

Adoption of Common Schemes for Single and Sequential Extractions of Trace Metal in Soils and Sediments

Abstract

The various methods for determining the mode of occurrence of trace metals in sediments and soils have a long history which dates back to the determinations of the availability of metals for plant nutrition performed earlier. Various methods have been developed in the 70′s and 80′s dealing with both single and sequential extraction schemes. Although some schemes received wide acceptance, none of them developed into a commonly accepted procedure. As a result, the information obtained was site-specific and the interpretation of the results scientist-specific. The workshop on single and sequential extraction in sediments and soils held at Sitges     

Trace Element Speciation in Soils and Sediments Using Sequential Chemical Extraction Methods

Abstract

Several commonly used sequential chemical extraction procedures of heavy metals in soils and sediments are compared, and their advantages and disadvantages are discussed focusing on selected case studies. In particular, problems caused by handling of anoxic samples, and of specific phases (e.g. organic fractions and sulfides) are addressed.

Eventually, recommendations for the improvement of extraction selectivity as well as the reduction of readsorption effects are given.     

Comparison of metal analysis in sediments using EDXRF and ICP-OES with the HCl and Tessie extraction methods

The work presents an investigation on metal availability in sediments during 13 months using the dispersive-energy X-ray fluorescence (EDXRF) and atomic emission spectrometry with induced argon plasma (ICP-OES) techniques and single extraction (0.1 mol l⁻¹ HCl) and Tessie’s sequential speciation methods. The EDXRF technique could yield essentially the same profile as ICP-OES for the seasonal variation of metals in sediments, but in a more practical way. The sequential extraction procedure (SEP) was more efficient in metal dissolution than single extraction. The Pb, Ni, Al, Cr, and Fe elements were less efficiently extracted with single extraction in relation to sequential extraction. For Co both methodologies were equivalent, but for Cu and Mn the extraction was higher with single extraction. Single extraction does not mobilize Pb, Ni, Al, Cr, and Fe adsorbed on oxides and bound to organic matter. However for Cu and Mn, not only extracted these metals from the four fractions, but it also dissolved part of the fifth fraction (residual). Principal Component Analysis discriminated seasonal variations in the content of several metals, mainly Fe, Co, Ni, and Zn. The mobility of metallic ions in the sediments is conditioned to the seasonal flow of organic and inorganic material coming from the river or by the erosion of adjacent soils.     

Interlaboratory Study to Improve the Quality Control of Methylmercury Determination in Sediment

The results are presented of an interlaboratory study on methylmercury (MeHg) in sediment carried out by a group of European laboratories within the framework of a project managed by the EC Standards, Measurements and Testing Programme (formerly BCR). The aim of this exercise was to evaluate the performance of current methods used for MeHg determination in sediment in order to improve the state-of-the-art prior to the certification of a candidate reference material. The paper describes the organization of the interlaboratory study, the preparation of the sediment material used, the techniques evaluated and the results obtained by the participating laboratories. The outcome of the collaborative project showed that certification could be contemplated, providing that certain analytical techniques were optimized, especially with regard to extraction methods.     

Optimization of a Sequential Extraction Scheme for the Characterization of Heavy Metal Mobility in Iron Oxide Rich Sediments

Abstract

Several parameters governing the extraction of metals from iron oxide rich sediments, using sequential extraction schemes were optimized. The mode of shaking, soil/extractant ratio and concentrations of MgCl₂ and NH₂OH·HCl, for samples collected in the Odiel Marshes Natural Park (SW Spain), were considered. The concentration of NH₂OH·HCl deserved particular attention due to the nature of the studied sediments. A 0.4 M concentration of this extractant was needed to avoid readsorption of Cu and As in the samples. In addition, readsorption processes were studied using a candidate to reference material with a high organic matter content that was previously analyzed in an interlaboratory study.     

Sequential extraction of phosphorus in soil and sediment using a continuous-flow system

Distribution and mobility of phosphorus in soil and sediment are usually studied by sequential extraction. In the extraction procedure, a sample is treated with a series of reagents to distinguish the phases to which phosphorus is associated such as carbonate and iron or manganese oxides, etc. There have been a number of extraction schemes presented for phosphorus. At present, all of the existing schemes are carried out batchwise. Phosphorus contents derived from all sequences are operationally defined and depend on experimental conditions.An extraction procedure, which is a continuous-flow-based technique, was recently proposed by our group for metals in soils and sediments. The extraction is carried out in a closed chamber through which extractants are passed sequentially. In this paper, the system was investigated using the extraction scheme of Hieltjes and Lijklema to study distribution of phosphorus in three certified reference materials (CRMs). A number of fractions were collected for each reagent for subsequent colorimetric determination. The results are compared with those obtained from a batch extraction. The summation of phosphorus contents of all phases were compared with the certified values and with the values obtained from total digestion. These results have demonstrated that the continuous extraction system developed is also applicable for fractionation of phosphorus. Advantage and disadvantage are discussed.