A systematic study of stereochemical effects in homologous poly(alkenamer)s: Dewar benzene versus norbornene

Two diastereomeric derivatives of norbornene, dimethyl (1R,2R,3S,4S)-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylate and dimethyl (1R,2S,3S,4S)-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylate, were synthesized and polymerized using ring-opening metathesis polymerization (ROMP). For comparative purposes, diastereomeric derivatives of Dewar benzene, dimethyl (1R,2S,3R,4S)-bicyclo[2.2.0]hex-5-ene-2,3-dicarboxylate and dimethyl (1R,2S,3S,4S)-bicyclo[2.2.0]hex-5-ene-2,3-dicarboxylate, were also synthesized and polymerized using ROMP. The polymerization reactions proceeded in a controlled manner as evidenced in part by linear relationships between the monomer-to-catalyst feed ratios and the molecular weights of the polymer products. Chain extension experiments were also conducted which facilitated the formation of block copolymers. Although the poly(norbornene) derivatives exhibited glass transition temperatures that were dependent on their monomer stereochemistry (cis: 115°C vs. trans: 125°C), more pronounced differences were observed upon analysis of the polymers derived from Dewar benzene (cis: 70°C vs. trans: 95°C). Likewise, microphase separation was observed in block copolymers that were prepared using the diastereomeric monomers derived from Dewar benzene but not in block copolymers of the norbornene-based diastereomers. The differential thermal properties were attributed to the relative monomer sizes as reducing the distances between the polymer backbones and the pendant stereocenters appeared to enhance the thermal effects.     

Latent cationic palladium(II) phosphine carboxylate complexes for norbornene polymerization

The catalytic efficacy of trans‐[(R₃P)₂Pd(O₂CR′)(LB)][B(C₆F₅)₄] ( 1 ) (LB = Lewis base) and [(R₃P)₂Pd(κ²‐O,O‐O₂CR′)][B(C₆F₅)₄] ( 2 ) for mass polymerization of 5‐n‐butyl‐2‐norbornene (Butyl‐NB) was investigated. The nature of PR₃ and LB in 1 and 2 are the most critical components influencing catalytic activity/latency for the mass polymerization of Butyl‐NB. Further, it was shown that 1 is in general more latent than 2 in mass polymerization of Butyl‐NB. 5‐n‐Decyl‐2‐norbornene (Decyl‐NB) was subjected to solution polymerization in toluene at 63(±3) °C in the presence of several of the aforementioned palladium complexes as catalysts and the polymers obtained were characterized by gel permeation chromatography. Cationic trans‐[(R₃P)₂PdMe(MeCN)][B(C₆F₅)₄] [R = Cy ( 3a ), and ⁱPr ( 3b )] and trans‐[(R₃P)₂PdH (MeCN)][B(C₆F₅)₄] [R = Cy ( 4a ), and ⁱPr ( 4b )], possible products from thermolysis of trans‐[(R₃P)₂Pd(O₂CMe)(MeCN)][B(C₆F₅)₄] [R = Cy ( 1a ) and ⁱPr ( 1g )], as well as trans‐[(R₃P)₂Pd(η³‐C₃H₅)][B(C₆F₅)₄] [R = Cy ( 5a ), and ⁱPr ( 5b )], were also examined as catalysts for solution polymerization of Decyl‐NB. A maximum activity of 5360 kg/(molPd h) of 2a was achieved at a Decyl‐NB/Pd: 26,700 ratio which is slightly better than that achieved with 5a [activity: 5030 kg/(molPd h)] but far less compared with 4a [activity: 6110 kg/(molPd h)]. Polydispersity values indicate a single highly homogeneous character of the active catalyst species. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 103–110, 2009     

Phosphine (oxide)‐(thio) phenolate palladium complexes: Synthesis,characterization and (co)polymerization of norbornene

A series of palladium complexes ( 2a–2g ) ( 2a : [6‐^tBu‐2‐PPh₂‐C₆H₃O]PdMe(Py); 2b : [6‐C₆F₅–2‐PPh₂‐C₆H₃O]PdMe(Py); 2c : [6‐^tBu‐2‐PPh^tBu‐C₆H₃O]PdMe(Py); 2d : [2‐PPh^tBu‐C₆H₄O] PdMe(Py); 2e : [6‐SiMe₃–2‐PPh₂‐C₆H₃O]PdMe(Py); 2f : [2‐^tBu‐6‐(Ph₂P=O)‐C₆H₃O]PdMe(Py); 2g : [6‐SiMe₃–2‐(Ph₂P=O)‐C₆H₃S]PdMe(Py)) bearing phosphine (oxide)‐(thio) phenolate ligand have been efficiently synthesized and characterized. The solid‐state structures of complexes 2d , 2f and 2g have been further confirmed by single‐crystal X‐ray diffraction, which revealed a square‐planar geometry of palladium center. In the presence of B(C₆F₅)₃, these complexes can be used as catalysts to polymerize norbornene (NB) with relatively high yields, producing vinyl‐addition polymers. Interestingly, 2a /B(C₆F₅)₃ system catalyzed the polymerization of NB in living polymerization manner at high temperature (polydispersity index 1.07, M_n up to 1.5 × 10⁴). The co‐polymerization of NB and polar monomers was also studied using catalysts 2a and 2f . All the obtained co‐polymers could dissolve in common solvent.     

Metathesis polymerization of N-aryl norbornene dicarboximides. I

Metathesis polymerization of N-phenyl-exo-norbornene dicarboximide and ortho/meta/para methyl substituted phenyl nadimides was carried out using WCl₆/tetramethyltin. Structural characterization was done by FTIR, ¹H- and ¹³C-NMR. A mixture of cis and trans double bond structures were introduced in the backbone during polymerization. The cis content was higher (52 to 65%). In the DSC scan of poly(N-o-tolyl nadimide), two exotherms were observed at 240 and 270°C while in other samples only one exothermic transition was observed above 240°C. These exotherms disappeared in the second heating cycle. The T_g of the polymers, as determined in the second heating cycle, was highest in poly(N-o-tolyl nadimide) and lowest in poly(N-m-tolyl nadimide). The polymers were stable up to 443 ± 3°C and decomposed above this temperature in a single step. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2917–2924, 1997     

Regio- and stereochemical aspects in the synthesis of homoallylic alcohols from benzoins and their iodocyclisation to 2,3-diphenyltetrahydrofurans

Indium mediated allylation, crotylation and cinnamylation of benzoins and its substituted derivatives in THF-H₂O (2/1) provide a range of homoallylic alcohols. In general, the benzoins undergo allylation and crotylation in a sluggish manner compared to those observed earlier in the case of α-hydroxy aldehydes and are significantly affected by the electronic features of both the benzoin and indium organometallic reagent. The reactions exhibit higher order of diastereoselectivities than those observed for α-hydroxy aldehydes. The cinnamylation though proceeds in a highly diastereoselective manner but is restricted to only benzoin and 4,4′-dichlorobenzoin. The homoallylic alcohols undergo I₂ mediated intramolecular diastereoselective cyclization to provide 2,3-diphenyltetrahydrofuran derivatives. The relative stereochemistries in tetrahydrofurans and homoallylic alcohols have been assigned by coupling constants, NOE experiments and in one case by X-ray crystallography.     

Vinyl polymerizations of norbornene catalyzed by nickel complexes with acetoacetamide ligands

On the basis of a remote effect, a series of acetoacetamide ligands and corresponding nickel complexes N‐(R‐phenyl) acetoacetamide Ni(CH₂Ph) (PMe₃) (R = H, 1 ; R = 2‐methyl, 2 ; R = 2,6‐dimethyl, 3 ; R = 2,6‐diisopropyl, 4 ; R = 4‐NO₂, 5 ) were synthesized and characterized. The solid structure of complex 3 was confirmed by X‐ray single‐crystal analysis to be of cis form. ¹H and ³¹P NMR spectroscopy confirmed that cis and trans isomers of nickel complexes were present in solution. Norbornene polymerizations with acetoacetamide nickel complexes activated with modified methylaluminoxane (MMAO) were investigated in detail. Remote steric and electronic effects of acetoacetamide ligand on catalytic activity and molecular weight of polynorbornenes (PNBs) were observed. Characterizations of the obtained PNBs show that the obtained polymer products are non‐crystalline vinylic‐addition polynorbornenes. Copyright © 2013 John Wiley & Sons, Ltd.     

Addition copolymerization of norbornene lactone catalyzed by Pd complexes

The addition copolymerization of norbornene (NB) with functionalized monomers can lead to the modification of physical properties of poly(NB). Herein, the synthesis of new copolymer of NB with exo-norbornene lactone (exo-NBL) is reported. The copolymerization proceeded by four Pd catalytic systems, and of these, Pd(allyl)IDippCl/AgSbF₆ (IDipp = 1,3-bis[2,6-diisopropylphenyl]imidazolin-2-ylidene)) was the most effective for the incorporation of exo-NBL. Specifically, the copolymerization with exo-NBL/NB feed ratio of 50/50 at r.t. by 0.1 mol% of the Pd catalyst produced poly(NB-co-exo-NBL) with M_n of 87,000, and M_w/M_n of 1.2 in 40% yield, incorporating exo-NBL of 18 mol%. The time–conversion plots and ¹H diffusion ordered spectroscopy (DOSY) NMR analysis of the copolymer suggest that it has a random sequence. In contrast, no copolymer was formed from endo-NBL. This is because of steric hindrance of the endo-lactone moiety by considering the (co)polymerization of endo-5-norbornene-2-carboxylic acid methyl ester (endo-NBCO₂Me). The incorporation of exo-NBL improves the solubility of poly(NB-co-exo-NBL) in several chlorinated solvents and gives high thermal stability with 10% weight loss at a temperature of more than 400°C. Two amorphous halos corresponding to intra- and interchain distances were observed in the WAXD patterns, allowing to calculate d-spacing values, which are higher than that of poly(NB).     

Polymerization of norbornene with Co(II) complexes

The norbornene polymerization was studied in the presence of 6 pyridine bis(imine) cobalt(II) complexes activated with methylaluminoxane (MAO). Norbornene was also polymerized with CoCl₂ associated to MAO. All these catalytic systems generate an addition polymerization of norbornene, yielding fully saturated polymers. It was shown that the polymerization yield and the molar masses are highly dependant on several reaction parameters (monomer concentration, [Al]/[Co] ratio, polymerization temperature and time) and the frame of the ligand.     

钌催化降冰片烯开环移位聚合的研究

CpRuCl(PPh~3)~2/O~2和CH~3OCH~2CH~2CpRuCl(PPh~3)~2/O~2体系对降冰片(NBE)开环移位聚合(ROMP)有活性,降冰片烯的转化率和聚降冰片烯主链双键顺反比与气氛催化剂摩尔比及催化剂本身性质有关。在实验的基础上提出了钌催化降冰片烯开环移位聚合的可能机理。     

Copolymerization of carbon monoxide and norbornene derivatives with ester groups by palladium catalyst

In this article we will discuss the synthesis of the new copolymers of norbornene derivatives with an ester group and carbon monoxide, using Pd(CH₃CN)₄(BF₄)₂ as a catalyst and 2,2′-bipyridine as a ligand in nitromethane/methanol at 60°C. Elementary analysis, infrared spectra, and NMR spectra indicated that copolymers contain ketone, ester, and bicyclic structures. Methanol functions as the coinitiator and chain transfer agent in copolymerization. A decrease in the molar ratio of [CH₃OH]/[Pd] caused an increase in molecular weight and a decrease in yield of the copolymer. The number-average molecular weight of copolymers (M _n) ranged from 3800 to 5300, and the glass transition temperature (T_g) ranged from −32 to 117°C. Thermal analysis revealed that both T and T exceeded 180 and 230°C, respectively. Linear long-chain substituents such as n-C₁₁H₂₃C(O) O CH₂ drastically reduced T_g to a value of −32°C. In general, copolymers having a longer linear side-chain substituents of ester on norbornene have a more desirable solubility. Moreover, X-ray diffraction demonstrated that the degree of crystallinity decreases with an increasing length of side chain substituents. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1785–1790, 1998     

Nickel N‐heterocyclic carbene complexes in the vinyl polymerization of norbornene

Vinyl polymerized norbornene has some useful properties such as good mechanical strength, optical transparency and heat resistance. Several transition metal complexes have been described in the literature as active catalysts for the vinyl polymerization of norbornene. We now report the use of three types of nickel(II) complexes with N‐heterocyclic carbene (NHC) ligands in the catalytic vinyl polymerization of norbornene under a range of conditions. Specifically, two nickel complexes bearing a chelating bis(NHC) ligand, two nickel complexes bearing two chelating anionic N‐donor functionalized NHC ligands as well as one diiodidonickel(II) complex with two monodentate NHC ligands were tested. The solid‐state structure of bis(1,3‐dimethylimidazol‐2‐ylidene)diiodidonickel(II), as determined by X‐ray crystallography, is presented. The highest polymerization activity of 2.6 × 10⁷ g (mol cat)^?1 h^?1 was observed using the latter nickel complex as catalyst, activated by methylaluminoxane. The norbornene polymers thus obtained are of high molecular weight but with rather low polydispersity. Copyright © 2010 John Wiley & Sons, Ltd.     

Copolymerization of ethylene and norbornene using cyclopentadienylzirconium trichloride activated by isobutyl‐modified methylaluminoxane

The copolymerization of ethylene (E) and norbornene (NB) was investigated using the commercially available and inexpensive catalyst system, cyclopentadienylzirconium trichloride (CpZrCl₃)/isobutyl‐modified methylaluminoxane (MMAO), at a moderate polymerization temperature in toluene. For the CpZrCl₃ catalyst system activated by aluminoxane with a 40 mol % methyl group and a 60 mol % isobutyl group (MMAO), the quantities of the charged NB and the polymerization temperature significantly affected the molecular weights, polydispersities, and NB contents of the obtained copolymers and the copolymerization activities in all the experiments. As the charged NB increased and thereby the NB/E molar ratio increased, the NB content in the copolymer increased and reached a maximum value of 71 mol %. The CpZrCl₃/MMAO ([Al]/[Zr] = 1000) catalyst system with the [NB] of 2.77 mol L^?1 and ethylene of 0.70 MPa at 50 °C showed the highest activity of 1690 kg mol_Zr^?1 h^?1 and molecular weight of 21,100 g mol^?1. The ¹³C NMR analysis showed that the CpZrCl₃/MMAO catalyst system produced the E‐NB random copolymer with a number of NB homosequences such as the NN dyad and NNN triad. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7411–7418, 2008     

Synthesis and copolymerization of oligo(lactic acid) derived norbornene macromonomers with amino acid derived norbornene monomer: Formation of the 3D macroporous scaffold

Norbornene macromonomers 2 and 3 bearing 10‐ and 20‐mers of lactide were synthesized by ring‐opening polymerization of lactide using 5‐norbornene‐2, 3‐exo‐exo‐dimethanol as an initiator and DBU as a catalyst. Macromonomers 2 and 3 were copolymerized with amino acid derived norbornene monomer 1 , using the Grubbs 2nd generation ruthenium catalyst. The random and block copolymers with M_n's ranging from 28,000 to 180,000 were obtained almost quantitatively where the M_n's of the block copolymers were higher than those of the random ones. Three‐dimensional macroporous structure polymers with average pore size of 10 µm could be found in poly( 1 ) and the block co‐polymer of 1 and 2 or 1 and 3 at the high ratio of 1 . Meanwhile, poly( 2 ) and poly( 3 ) along with block and random copolymers with low ratio of 1 exhibit much larger pores in the range of 50–300 µm. The porosity increased with increase in the unit ratio of 1 . The compressive strength of the porous structure of poly( 2 ) and poly( 3 ) was improved by the copolymerization with 1 . © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1660–1670     

Vinylic polymerization of norbornene by neutral nickel(II)‐based catalysts

Neutral Ni(II) salicylaldiminato complexes activated with modified methylaluminoxane as catalysts were used for the vinylic polymerization of norbornene. Catalyst activities of up to 7.08 × 10⁴ kg_pol/(mol_Ni · h) and viscosity‐average molecular weights of polymer up to 1.5 × 10⁶ g/mol were observed at optimum conditions. Polynorbornenes are amorphous, soluble in organic solvents, highly stable, and show glass‐transition temperatures around 390 °C. Catalyst activity, polymer yield, and polymer molecular weight can be controlled over a wide range by the variation of the reaction parameters such as the Al/Ni ratio, monomer/catalyst ratio, monomer concentration, polymerization reaction temperature, and time. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2680–2685, 2002     

Free Radical‐Induced and Pd(II) Complexes‐Catalyzed Poly(norbornene) Formation

The reactions of norbornene polymerization were catalyzed by Pd(CH₃CN)₄(BF₄)₂ ( 1 ), AIBN ( 2 ), and [{(2,6‐C₆H₃(ⁱPr)₂)N=C(Me)}₂Pd(Me)(CH₃CN)][BF₄] ( 3 ) without using methylalumoxane (MAO). These poly(norbornene)s are readily soluble in organic solvents such as toluene, dichloromethane and tetrahydrofuran. According to the NMR data, the end group of PNA resulting from the AIBN process is found from THF. The PNT resulting from the catalyst ( 1 ) shows bi‐models of GPC bands (M_n= 4236 and 66317), two glass transition temperatures (T_g = 72.7 and 201.5 °C), as well as two decomposition temperatures (Td = 337 and 460 °C).     

Ethylene/hindered phenol substituted norbornene copolymers: Synthesis and NMR structural determination

A new family of ethylene‐based copolymers with controlled amounts of a norbornene comonomer (N_ArOH) bearing a stabilizing antioxidant functionality (2,6‐di‐tert‐butyl phenol) was prepared. Due to unavoidable exo/endo equilibrium operative in N_ArOH comonomer, a complete and detailed NMR assignment of the structure of the prepared ethylene/N_ArOH copolymers was carried out for the determination of the exo/endo ratio inside the polymer. These novel functionalized comonomers can be considered suitable starting material for preparing ethylene‐based copolymers, with tunable comonomer content, as non‐releasing macromolecular antioxidant additives for specific application in safe food and/or drug packaging © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of norbornene/divinylbenzene copolymers catalyzed by anilinonaphthoquinone-ligated nickel complexes and their applications for the synthesis of graft polymers

The copolymerization of norbornene (NB) and divinylbenzene (DVB) was carried out using anilinonaphthoquinone-ligated nickel complexes of the type [Ni(C₁₀H₅O₂NAr)(Ph)(PPh₃)] ( 1a : Ar = C₆H₃-2,6- ⁱPr; 1b : Ar = C₆H₂-2,4,6-Me; 1c: Ar = C₆H₅) with modified methylaluminoxane (MMAO) as a cocatalyst. The DVB content was varied (5–25 mol%) and the resulting copolymers exhibited number-average molecular weights (M_n) of 40,000–69,000 g/mol with polydispersities (PDI = 1.5–1.8). The styryl group of the NB/DVB copolymer was used for grafting poly(methyl methacrylate) by reverse atom transfer radical polymerization using azobisisobutyronitrile in the presence of copper chloride and bipyridine.     

Ring‐opening metathesis polymerization of amino acid‐functionalized norbornene derivatives

Amino acid‐derived novel norbornene derivatives, N,N′‐(endo‐bicyclo[2.2.1] hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐alanine methyl ester (NBA), N,N′‐(endo‐bicyclo[2.2.1]hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐leucine methyl ester (NBL), N,N′‐(endo‐bicyclo[2.2.1]hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐phenylalanine methyl ester (NBF) were synthesized and polymerized using the Grubbs 2nd generation ruthenium (Ru) catalyst. Although NBA, NBL, and NBF did not undergo homopolymerization, they underwent copolymerization with norbornene (NB) to give the copolymers with M_n ranging from 5200 to 38,100. The maximum incorporation ratio of the amino acid‐based unit was 9%, and the cis contents of the main chain were 54–66%. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5337–5343, 2006     

Nonconventional allylation of norbornene and norbornadiene derivatives: stoichiometry and catalysis

The key trends for the development of catalytic reactions of allyllic esters of carboxylic acids with norbornene, norbornadiene, and their heterocyclic analogs in the presence of the nickel and palladium complexes are discussed. The main approaches to investigation of the mechanism using model stoichiometric reactions and quantum chemical calculations are described. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 823–830, April, 2008.