The Crystal Chemistry of Lithium in the Alluaudite Structure: A Study of the (Na1−xLix)CdIn2(PO4)3 Solid Solution (x=0 to 1)

Several compounds of the (Na_1−xLi_x)CdIn₂(PO₄)₃ solid solution were synthesized by a solid-state reaction in air, and pure alluaudite-like compounds were obtained for x=0.00, 0.25, and 0.50. X-ray Rietveld refinements indicate the occurrence of Cd²⁺ in the M(1) site, and of In³⁺ in the M(2) site of the alluaudite structure. This non-disordered cationic distribution is confirmed by the sharpness of the infrared absorption bands. The distribution of Na⁺ and Li⁺ on the A(1) and A(2)′ crystallographic sites cannot be accurately assessed by the Rietvled method, probably because the electronic densities involved in the Na⁺→Li⁺ substitution are very small. A comparison with the synthetic alluaudite-like compounds, (Na_1−xLi_x)MnFe₂(PO₄)₃, indicates the influence of the cations occupying the M(1) and M(2) sites on the coordination polyhedra morphologies of the A(1) and A(2)′ crystallographic sites.     

Quaternary selenostannates Na2−xGa2−xSn1+xSe6 and AGaSnSe4 (A=K, Rb, and Cs) through rapid cooling of melts. Kinetics versus thermodynamics in the polymorphism of AGaSnSe4

The quaternary alkali-metal gallium selenostannates, Na_2−xGa_2−xSn_1+xSe₆ and AGaSnSe₄ (A=K, Rb, and Cs), were synthesized by reacting alkali-metal selenide, Ga, Sn, and Se with a flame melting-rapid cooling method. Na_2−xGa_2−xSn_1+xSe₆ crystallizes in the non-centrosymmetric space group C2 with cell constants a=13.308(3) Å, b=7.594(2) Å, c=13.842(3) Å, β=118.730(4)°, V=1226.7(5) Å³. α-KGaSnSe₄ crystallizes in the tetragonal space group I4/mcm with a=8.186(5) Å and c=6.403(5) Å, V=429.1(5) Å³. β-KGaSnSe₄ crystallizes in the space group P2₁/c with cell constants a=7.490(2) Å, b=12.578(3) Å, c=18.306(5) Å, β=98.653(5)°, V=1705.0(8) Å³. The unit cell of isostructural RbGaSnSe₄ is a=7.567(2) Å, b=12.656(3) Å, c=18.277(4) Å, β=95.924(4)°, V=1741.1(7) Å³. CsGaSnSe₄ crystallizes in the orthorhombic space group Pmcn with a=7.679(2) Å, b=12.655(3) Å, c=18.278(5) Å, V=1776.1(8) Å³. The structure of Na_2−xGa_2−xSn_1+xSe₆ consists of a polar three-dimensional network of trimeric (Sn,Ga)₃Se₉ units with Na atoms located in tunnels. The AGaSnSe₄ possess layered structures. The compounds show nearly the same Raman spectral features, except for Na_2−xGa_2−xSn_1+xSe₆. Optical band gaps, determined from UV-Vis spectroscopy, range from 1.50 eV in Na_2−xGa_2−xSn_1+xSe₆ to 1.97 eV in CsGaSnSe₄. Cooling of the melts of KGaSnSe₄ and RbGaSnSe₄ produces only kinetically stable products. The thermodynamically stable product is accessible under extended annealing, which leads to the so-called γ-form (BaGa₂S₄-type) of these compounds.     

Dimensional reductions from 2-D Nb4P2S21 to 1-D ANb2PS10 (A=Na, K, Rb, Cs, Tl) and to 0-D Tl5[Nb2S4Cl8]Cl using halide molten salts

We found new synthetic routes to obtain 1-D quaternary thiophosphate compounds and a 0-D molecular complex containing a Nb₂S₄ core from a 2-D ternary thiophosphate, Nb₄P₂S₂₁. When Nb₄P₂S₂₁ was reacted with alkali metal halides (ACl; A=Na, K, Rb, Cs) or TlCl at 500-700 °C, the -S-S-S- bridges in 2-D Nb₂PS₁₀-S-S₁₀PNb₂ were excised to form a 1-D chain, and cations were inserted between the chains to form ANb₂PS₁₀ (A=Na, K, Rb, Cs, Tl). We also found that thallium chloride (TlCl) is an excellent reagent for further excision, and it substitutes chloride ligands for the sulfur ligands of 2-D Nb₄P₂S₂₁ to form the molecular complex Tl₅[Nb₂S₄Cl₈]Cl. Crystal data for TlNb₂PS₁₀: monoclinic, Pn, a=6.9452(11) Å, b=7.3761(12) Å, 12.873(2) Å, β=104.472(3)°, and Z=2. Crystal data for Tl₅[Nb₂S₄Cl₈]Cl: orthorhombic, Immm, a=7.001(5) Å, b=9.509(7) Å, c=15.546(11) Å, and Z=2.     

A new octahedral tilt system in the perovskite phase Ca3Nb2O8

The perovskite-related phase Ca₃Nb₂O₈, when grown as single crystals from a calcium vanadate flux, incorporates a small amount of vanadium from the flux to form the composition Ca₃Nb_2−xV_xO₈ with x=0.025. The crystals have pseudo-cubic symmetry with a=6×a_c(perovskite). The actual symmetry is rhombohedral, space group R3, with a_h=16.910(1) Å, c_h=41.500(2) Å. The structure was solved using a combination of single-crystal methods together with constrained refinements of powder X-ray and neutron powder data. The unit-cell composition is [Ca₁₃₈□₂₄]_A [Ca₄₂Nb₁₁₇V₃]_B[O₄₈₀□₆], with vacancies in both the anion sites and A-cation sites. The Ca and Nb atoms are fully ordered in the B-sites such that (001) layers containing only Nb-centered octahedra alternate with layers containing both Nb-centered and Ca-centered octahedra. At the origin B-site, ordered oxygen vacancies result in the octahedron being transformed to a tetrahedron, which, in the single crystals, is occupied by vanadium. The structure displays a new type of octahedral tilt system in which 3×3×3 blocks of (a⁺a⁺a⁺) tilts are periodically twinned on the pseudo-cubic {1 0 0}_c planes.     

Nonstoichiometric oxides with a layer structure: The compounds A1−x(Ti1−xM1+x)O5

New nonstoichiometric oxides A_1?x(Ti_1?xNb_1+x)O₅ and tantalates ATiTaO₅ with a layer structure of the KTiNbO₅ type have been isolated, with A = K, Rb, Tl, Cs. These oxides, which are orthorhombic, space group Pnma, are characterized by a preferential occupation of one type of site 4c by the titanium atoms. The structural evolution as a function of composition and the stability of these compounds are discussed.     

A novel family of layered bismuth compounds II: the crystal structures of Pb0.6Bi1.4Rb0.6O2Z2, Z=Cl, Br, and I

Using various synthetic approaches, we have prepared over 50 new multinary bismuth oxyhalides which crystallize in four layered structure types. Most of the compounds belong to the three previously reported structure types involving fluorite- and CsCl-like metal-oxygen vs. metal-halogen layers as well as single or double halide ion sheets. The majority of Bi_2−xA_xQ_0.6O₂Z₂ (A=Li, Na, K, Ca, Sr, Ba, Pb; Q=Rb, Cs; Z=Cl, Br, I) compounds crystallize in the tetragonal structure of Pb_0.6Bi_1.4Cs_0.6O₂Cl₂ (Y2) while both Bi_1.4Ba_0.6Q_0.6O₂I₂ (Q=Rb, Cs) oxyiodides adopt its orthorhombically distorted, partially ordered version. Due to the lower degree of substitution, the fluorite-like layers in the Y2 structure accommodate more A cations than previously known for related Bi compounds. However, very large Tl⁺ or Rb⁺ give compounds with another, as yet unknown, structure. We discuss the influence of size and charge of A cations and stoichiometry of [Bi_2−xA_xO₂] fluorite layers on structure and stability of layered oxyhalides of bismuth. Also, we predict formation of isostructural compounds with smaller Q cations like Tl⁺ and K⁺.     

Tl2D coordination polymer involving close Tl?π (aromatic) contacts, [Tl3(μ-BPC)2(μ-NO3)]n

A two-dimensional polymer, [Tl₃(μ-BPC)₂(μ-NO₃)]_n [BPC = biphenyl-2-carboxylate], has been synthesized and characterized. Its single-crystal X-ray structure shows three types of Tl^I-ions with coordination numbers of 5 (Tl1 and Tl2), and 4 (Tl3). Two of the thallium atoms, Tl1 and Tl3, contain close Tl^I?π (aromatic) contacts, thus attaining a total hapticity of 11 and 10 with environments Tl1O₅C₆ and Tl3O₄C₆, respectively.     

High-pressure single-crystal X-ray diffraction of Tl2SeO4

The effect of pressure on the crystal structure of thallium selenate (Tl₂SeO₄) (Pmcn, Z=4), containing the Tl⁺ cations with electron lone pairs, has been studied with single-crystal X-ray diffraction in a diamond anvil cell up to 3.64 GPa at room temperature. No phase transition has been observed. The compressibility data are fitted by a Murnaghan equation of state with the zero-pressure bulk modulus B₀=29(1) GPa and the unit-cell volume at ambient pressure V₀=529.6(8) Å³ (B′=4.00). Tl₂SeO₄ is the least compressible in the c direction, while the pressure-induced changes of the a and b lattice parameters are quite similar. These observations can be explained by different pressure effects on the nine- and 11-fold coordination polyhedra around the two non-equivalent Tl atoms. The SeO₄²⁻ tetrahedra are not rigid units and become more distorted. Their contribution to the compressibility is small. The effect of pressure on the isotypical oxide materials A₂TO₄ with the β-K₂SO₄ structure is discussed. It appears that the presence of electron lone pairs on the Tl⁺ cation does not seem to influence the compressibility of Tl₂SeO₄.     

Structural and magnetic characterisation of Aurivillius material Bi2Sr2Nb2.5Fe0.5O12

The n=3 Aurivillius material Bi₂Sr₂Nb_2.5Fe_0.5O₁₂ is investigated and combined structural refinements using neutron powder diffraction (NPD) and X-ray powder diffraction data (XRPD) data reveal that the material adopts a disordered, tetragonal (I4/mmm) structure at temperatures down to 2 K. Significant ordering of Fe³⁺ and Nb⁵⁺ over the two B sites is observed and possible driving forces for this ordering are discussed. Some disorder of Sr²⁺ and Bi³⁺ over the M and A sites is found and is consistent with relieving strain due to size mismatch. Highly anisotropic thermal parameters for some oxygen sites suggest that the local structure may be slightly distorted with some rotation of the octahedra. Magnetic measurements show that the material behaves as a Curie-Weiss paramagnet in the temperature range studied with no evidence of any long-range magnetic interactions. Solid solutions including Bi_3−xSr_xNb₂FeO₁₂, Bi₂Sr_2−xLa_xNb₂FeO₁₂ and Bi₂Sr₂Nb_3−xFe_xO₁₂ were investigated but single-phase materials were only successfully synthesised for a narrow composition range in the Bi₂Sr₂Nb_3−xFe_xO₁₂ system.     

Temperature and composition dependent structural investigation of the defect perovskite series Sr1−xTi1−2xNb2xO3, 0≤x≤0.2

The crystal structure of the defect perovskite series Sr_1−xTi_1−2xNb_2xO₃ has been investigated over a range of temperatures using high-resolution synchrotron X-ray diffraction, neutron diffraction and electron diffraction. Three distinct regions were observed: 0<x≤0.125 was a solid solution of Sr_1−xTi_1−2xNb_2xO₃ with minor SrTiO₃ intergrowth, 0.125<x≤0.2 was a pure Sr_1−xTi_1−2xNb_2xO₃ solid solution adopting the cubic perovskite type structure (Pm3¯m) and for x>0.2 Sr_0.8Ti_0.6Nb_0.4O₃ and Sr₃TiNb₄O₁₅ formed a two phase region. The cubic structure for Sr_0.8Ti_0.6Nb_0.4O₃ was stable over the temperature range 90-1248 K and the thermal expansion co-efficient was determined to be 8.72(9)×10⁻⁶ K⁻¹. Electron diffraction studies revealed diffuse scattering due to local scale Ti/Nb displacements and slightly enhanced octahedral rotations that did not lead to long range order. The octahedral rotations were observed to ‘lock-in’ at temperatures below ∼75 K resulting in a tetragonal structure (I4/mcm) with anti-phase octahedral tilting about the c-axis.     

Structure Study of Bi2.5Na0.5Ta2O9 and Bi2.5Nam−1.5NbmO3m+3 (m=2-4) by Neutron Powder Diffraction and Electron Microscopy

The crystal structures of Bi_2.5Na_0.5Ta₂O₉ and Bi_2.5Na_m-1.5Nb_mO_3m+3 (m=3,4) have been investigated by the Rietveld analysis of their neutron powder diffraction patterns (λ=1.470 Å). These compounds belong to the Aurivillius phase family and are built up by (Bi₂O₂)²⁺ fluorite layers and (A_m-1B_mO_3m+1)^2- (m=2-4) pseudo-perovskite slabs. Bi_2.5Na_0.5Ta₂O₉ (m=2) and Bi_2.5Na_2.5Nb₄O₁₅ (m=4) crystallize in the orthorhombic space group A2₁am, Z=4, with lattice constants of a=5.4763(4), b=5.4478(4), c=24.9710 (15) and a=5.5095(5), b=5.4783(5), c=40.553(3) Å, respectively. Bi_2.5Na_1.5Nb₃O₁₂ (m=3) has been refined in the orthorhombic space group B2cb, Z=4, with the unit-cell parameters a=5.5024(7), b=5.4622(7), and c=32.735(4) Å. In comparison with its isostructural Nb analogue, the structure of Bi_2.5Na_0.5Ta₂O₉ is less distorted and bond valence sum calculations indicate that the Ta-O bonds are somewhat stronger than the Nb-O bonds. The cell parameters a and b increase with increasing m for the compounds Bi_2.5Na_m-1.5Nb_mO_3m+3 (m=2-4), causing a greater strain in the structure. Electron microscopy studies verify that the intergrowth of mixed perovskite layers, caused by stacking faults, also increases with increasing m.     

Synthesis, structure and electrical properties of Cu3.21Ti1.16Nb2.63O12 and the CuOx-TiO2-Nb2O5 pseudoternary phase diagram

Subsolidus phase relations in the CuO_x-TiO₂-Nb₂O₅ system were determined at 935 °C. The phase diagram contains one new phase, Cu_3.21Ti_1.16Nb_2.63O₁₂ (CTNO) and one rutile-structured solid solution series, Ti_1−3xCu_xNb_2xO₂: 0<x<0.2335 (35). The crystal structure of CTNO is similar to that of CaCu₃Ti₄O₁₂ (CCTO) with square planar Cu²⁺ but with A site vacancies and a disordered mixture of Cu⁺, Ti⁴⁺ and Nb⁵⁺ on the octahedral sites. It is a modest semiconductor with relative permittivity ∼63 and displays non-Arrhenius conductivity behavior that is essentially temperature-independent at the lowest temperatures.     

New thallium iodates—Synthesis, characterization, and calculations of Tl(IO3)3 and Tl4(IO3)6, [Tl3Tl(IO3)6]

Two new thallium iodates have been synthesized, Tl(IO₃)₃ and Tl₄(IO₃)₆ [Tl⁺₃Tl³⁺(IO₃)₆], and characterized by single-crystal X-ray diffraction. Both materials were synthesized as phase-pure compounds through hydrothermal techniques using Tl₂CO₃ and HIO₃ as reagents. The materials crystallize in space groups R-3 (Tl(IO₃)₃) and P-1 (Tl₄(IO₃)₆). Although lone-pairs are observed for both I⁵⁺ and Tl⁺, electronic structure calculations indicate the lone-pair on I⁵⁺ is stereo-active, whereas the lone-pair on Tl⁺ is inert.     

Compositionally controlled metal-insulator transition in Tl2−xInxTeO6

Tl₂TeO₆ and In₂TeO₆ are both known to crystallize in the Na₂SiF₆-type structure. We find Tl₂TeO₆ is metallic, whereas In₂TeO₆ is an insulator. We have prepared a complete Tl_2−xIn_xTeO₆ series in a search for a compositionally controlled metal-insulator transition that might be expected if a complete solid solution can be obtained. Unit cell edges and volume vary monotonically with no indication of a miscibility gap. The metal-insulator transition occurs at an x value of about 1.4, which can be rationalized on a percolation model. No superconductivity could be detected down to 5 K.     

Ordered perovskites in the A(Li1/4Nb3/4)O3-A(Li2/5W3/5)O3 (A=Sr, Ca) systems

Single-phase 1:2 B-site ordered perovskites are formed in the (1−x)A²⁺(Li_1/4Nb_3/4)O₃-(x)A²⁺(Li_2/5W_3/5)O₃ systems, A²⁺=Sr and Ca, within the range 0.238?x?0.333. The X-ray and electron diffraction patterns are consistent with a P2₁/c monoclinic supercell, , , , β≈125°, where the 1:2 order is combined with b⁻b⁻c⁺ octahedral tilting. Rietveld refinements of the ordered A(B^I_1/3B^II_2/3)O₃ structures give a good fit to a model with B^I occupied by Li and Nb, B^II by W and Nb, and a general stoichiometry (Sr,Ca)(Li_3/4+y/2Nb_1/4−y/2)_1/3(Nb_1−yW_y)_2/3O₃, y=0.9x=0.21-0.30. The Sr system also includes regions of stability of a 1:3 ordered phase for 0.0?x?0.111, and a 1:1 ordered double perovskite for 0.833?x?1.0. The formation of the non-stoichiometric 1:2 ordered phases is associated with the large site charge/size differences that can be accessed in these systems, and restricted by local charge imbalances at the A-sites for W-rich compositions. These concepts are used to generate stability maps to rationalize the formation of the known 1:2 ordered oxide perovskites.     

Recherche de matériauxa`conductivitéionique ame´liore´e de´rivant des hydrurofluorures de calcium CaF2−xHx: conductivite´ ionique des phases Ca1−yNay(F2−xHx)1−y/2

The doping of CaF_2?xH_x hydridefluorides by aliovalent ions is studied, the aim being the preparation of materials of improved ionic conductivity. It is shown that doping by monovalent Na⁺ ions is possible. Three hydrogen-rich phases, formulated Na_yCa_1?y(F_2?xH_x)_1?y/2 have been studied. Their conductivity is mainly ionic, but, compared with the same doping in CaF₂, the conductivity enhancement is low. This result is interpreted from energetic and structural considerations.     

Synthesis and structural analysis of Bi2−ySryIr2O7, a new pyrochlore solid solution

This paper presents a study of the synthesis and structural properties of the new pyrochlore-type Bi_2−ySr_yIr₂O₇ series. Ten compositions with 0.0≤y≤0.9 were prepared by solid-state reaction with thermal treatments at 873, 1073 and 1323 K under atmospheric pressure conditions. Structural refinements from X-ray powder diffraction data by the Rietveld method show that all compounds of the Bi_2−ySr_yIr₂O₇ solid solution crystallize in a α-pyrochlore structure. The main structural difference when bismuth is substituted by strontium concerns the x position of the O1 (x, ?, ?). This substitution significantly increases the Bi/Sr-O1 distance and diminishes the Ir-O1 distance; this implies that the Ir-O1-Ir bond angle increases. With the Sr substitution, the IrO₆ local configuration goes from a flattened trigonal antiprism, y<0.5, to an elongated one, y>0.5, passing through an octahedral array, y∼0.5. The electrical consequences of these structural changes observed in this system are qualitatively explained with electronic structure calculations, this behavior agrees very well with those observed in other pyrochlore systems A₂M₂O₇ (A=rare earth cations or Tl⁺, Pb²⁺, or Bi³⁺, and M=Ru or Ir).     

Synthesis, crystal structure and spectroscopy properties of Na3AZr(PO4)3 (A=Mg, Ni) and Li2.6Na0.4NiZr(PO4)3 phosphates

Na₃AZr(PO₄)₃ (A=Mg, Ni) phosphates were prepared at 750 °C by coprecipitation route. Their crystal structures have been refined at room temperature from X-ray powder diffraction data using Rietveld method. Li_2.6Na_0.4NiZr(PO₄)₃ was synthesized through ion exchange from the sodium analog. These materials belong to the Nasicon-type structure. Raman spectra of Na₃AZr(PO₄)₃ (A=Mg, Ni) phosphates present broad peaks in favor of the statistical distribution in the sites around PO₄ tetrahedra. Diffuse reflectance spectra indicate the presence of octahedrally coordinated Ni²⁺ ions.     

Studies of layered uranium (VI) compounds. VI. Ionic conductivities and thermal stabilities of MUO2PO4 · nH2O,where M = H,Li,Na,K,NH4 or 12Ca, and where n is between 0 and 4

We have measured the ionic conductivities of pressed pellets of the layered compounds MUO₂PO₄ · nH₂O, and correlated the results with TGA data. The conductivities (in ohm^?1 m^?1), at temperatures increasing with decreasing water content over the range 20 to 200°C, were approximately as follows: Li⁺4H₂O, 10^?4; Li⁺, Na⁺, K⁺, and NH₄⁺3H₂O, 10^?4, 10^?2, 10^?4, and 10^?4; H⁺, Li⁺, and Na⁺1.5H₂O, 10^?2, 10^?4, and 10^?4; Na⁺1H₂O, 10^?5; H⁺, K⁺, and NH₄⁺0.5H₂O, all 10^?5; and H⁺, Li⁺, Na⁺, K⁺, NH⁺₄, and $\text{1}\text{2}\text{Ca}{}^{\mathrm{2+}}\text{}\text{OH}{}_2\text{O}$, 10^?5, 10^?5, 10^?4, 10^?5, 10^?5, and 10^?6. A ring mechanism is proposed to account for the high conductivity found in NaUO₂PO₄ · 3.1H₂O. The accurate TGA data showed that most of the hydrates had water vacancies of the Schottky type, and should be represented as MUO₂PO₄(A ? x)H₂O, where x can be between 0 and 0.3.     

Crystal Structure of Pseudorhombohedral InFe1−xTixO3+x/2 (x=2/3)

The structure of pseudorhombohedral-type InFe_1−xTi_xO_3−x/2 (x=2/3) was refined by Rietveld profile fitting. The crystal is a commensurate member of a series in a solution range on InFeO₃-In₂Ti₂O₇ including incommensurate structures. The structure with the unit cell of a=5.9188(1), b=10.1112(2), and c=6.3896(1) Å, β=108.018(2)°, and a space group P2₁/a is the alternate stacking of an edge-shared InO₆ octahedral layer and an Fe/Ti-O plane along c^*. Metal sites on the Fe/Ti-O plane are surrounded by four oxygen atoms on the Fe/Ti-O plane and two axial ones. Electric conductivities of the order 10⁻⁴ S/cm were observed for the samples at 1000 K, while the oxide ion transport number is almost zero as no electromotive force was detected by an oxygen concentration cell.