Synthesis and Characterization of Hyperbranched Polyesters Based on Isophthalic Acid and Trimethylolpropane

Hydroxyl-terminated hyperbranched polyesters (HBPEs) with aromatic/aliphatic structure were synthesized at three different monomer mole ratios (A₂/B₃=1, 0.9, and 0.6, respectively) by melt polycondensation of isophthalic acid and trimethylolpropane via A₂+ B₃ approach. Fourier transform infrared (FTIR) spectroscopy indicated that the expected HBPEs, which showed excellent solubility in a variety of polar solvents such as N, N-dimethyl formamide (DMF), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide (DMSO), and terahydrofuran (THF), were produced without gelation during the polymerization. The weight-average molecular weight of HBPEs ranged from 7014 to 8306 and their inherent viscosities were varied from 0.17 to 0.34 dL/g. The degree of branching of the HBPEs was estimated to be 0.39–0.49 by¹H-NMR and ¹³C-NMR measurement. Their glass transition temperature measured by differential scanning calorimetry (DSC) was between 64 and 86°C. The thermogravimetric analysis (TGA) measurement revealed that HBPEs had ca 8.5% weight-loss at 300°C in N₂.     

Photoactive liquid crystalline polymers: A comprehensive study of linear and hyperbranched polymers synthesized by A2B2, A2B3, A3B2, and A3B3 approaches

A series of linear and hyperbranched polyester epoxies, with varied structural parameters such as kinked structure and different dendritic architectures, were synthesized by A₂ + B₂, A₂ + B₃, A₃ + B₂, and A₃ + B₃ approaches. The structures of synthesized monomers and polymers were confirmed by Fourier transform infrared, ¹H NMR, and ¹³C NMR spectroscopic techniques. The effect of varied structural parameters on phase behavior and photoresponsive properties was investigated by using differential scanning calorimeter, thermal optical polarized microscope, UV–visible spectroscopy, photoviscosity, and refractive index studies. The transition temperatures of hyperbranched polymers were higher than that of the corresponding linear analogues. All the polymers showed nematic phase (nematic droplets) over a broad temperature range. The effect of kinked structural unit on photoresponsive property is less in both linear and hyperbranched architectures. Although the effect of architectural nature is highly considerable within the hyperbranched architectures, the polymer (HPE–33) synthesized by A₃ + B₃ approach showed highest rate of photocrosslinking, followed by HPE–I 32; HPE–T 32, and HPE–23, which were synthesized by A₃ + B₂ and A₂ + B₃ approaches, respectively. The findings in photoresponsive properties were further supported by molecular modeling studies. Substantial variation of refractive index (0.015–0.024) indicates that these polymers could be used for optical recording. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Hyperbranched thermolabile polycarbonates derived from a A2+B3 monomer system

Hyperbranched polycarbonates were synthesized successfully via the A₂ + B₃ route by the reaction of a bis(carbonylimidazolide) with triethanolamine. These polymers containing the carbonate group as thermolabile moiety are decomposing into volatile products at around 200°C. The polymers were characterized with ¹H/¹³C NMR spectroscopy, SEC, DSC and TGA techniques.     

Linear and A2+B3‐type hyperbranched polyesters comprising phenylbenzothiazole unit: Preparation,liquid crystalline,and optical properties

Novel liquid crystalline (LC) hyperbranched (HB) polyesters comprising phenylbenzothiazole (PBT) unit as mesogen in the interiors were prepared at various feed mole ratios (A₂/B₃) by solution polycondensation of a dioxydiundecanol derivative of PBT (A₂ monomer) with trimesic acid trimethyl ester (B₃ monomer) via A₂+B₃ approach and their LC and optical properties were investigated. Analogous linear polyesters containing the PBT unit in the main chains were also prepared by the solution polycondensation of A₂ monomer with aromatic or aliphatic dimethyl esters. FTIR and ¹H‐NMR spectroscopies indicated that the HB polyesters are produced without gelation during the polycondensation and have degree of branching (DB) of 7–46%. The structures of HB polymers changed depending on the feed mole ratios and the polymer prepared in the mole ratio of A₂/B₃ = 3/2 had the highest inherent viscosity and DB. Acetylation of terminal OH group‐having HB polyesters prepared in excess mole ratios of A₂/B₃ afforded ones bearing acetoxy groups in the terminals. DSC measurements, polarizing microscope observations of textures, and X‐ray analyses suggested that only the terminal OH group‐having HB polymer prepared in the mole ratio of A₂/B₃ = 3/1 form smectic C phase. In the linear polymers, the polymers derived by using the aromatic dimethyl esters had no LC melt, but those from the aliphatic dimethyl esters formed LC smectic C phase. The acetoxy group‐bearing HB polymers showed more stable smectic A or C phase than those with the OH terminals. Solution UV‐vis and photoluminescent (PL) spectra indicated that the linear and the HB polymers have analogous optical properties and display maximum absorbances and blue‐light emission on the basis of the PBT unit, where the Stokes shifts were observed because of intermolecular aggregation effects, but there is a large difference between the optical behaviors of the linear and the HB polymers in film, whose E_g values of the linear polymers decreased and those of the HB polymers vice versa. Quantum efficiencies (Φ) had a tendency of increase in the linear polymers and the HB polymers forming LC phases. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6688–6702, 2008     

Second-order nonlinear optical hyperbranched polymers via facile ring-opening addition reaction of azetidine-2,4-dione

A new hyperbranched polymeric structure was chosen as a nonlinear optical material. First, a difunctional chromophore, 4-(4′-nitrophenyl-diazenyl) phenyl-1,3-diamine (NDPD) was synthesized, which was then reacted with 4-isocyanato-4′(3,3-dimethyl-2,4-dioxo-azetidino)diphenylmethane (MIA) to form NDPDMIA (A₂ type monomer). The azetidin-2,4-dione functional groups exhibit selective reactivity, which can react only with primary amines under mild conditions. The hyperbranched polymers were synthesized via ring-opening addition reaction between azetidine-2,4-dione (A₂ type monomer) and primary amine (B₃ type monomer). This synthetic scheme comes with easy purification, high yield and rapid synthesis. Chemical structures of the hyperbranched polymers were characterized by FT-IR, ¹H NMR, and elemental analysis. The inherent viscosity of hyperbranched polymers in DMSO ranged from 0.15 to 0.22 dLg⁻¹. All of the obtained polymers were soluble in DMF, DMAc, and DMSO. Using in situ contact poling, r₃₃ coefficients of 6-16 pm/V and their temporal stability at 60 °C were obtained. Optical loss measurement was also achieved by a prism coupling setup.     

Synthesis and characterization of the B3-monomer and hyperbranched poly(aryl ether ketone)s

Hyperbranched poly(aryl ether ketone)s were prepared by polymerization of hydroquinone (A₂) and 1,3,5-tris[4-(4-fluorobenzoyl)phenoxy]benzene (B₃). The gelation of hyperbranched poly(aryl ether ketone)s was effectively avoided. Hydroxyl-term inated (HPAEK-OH) and fluoro-terminated (HPAEK-F) hyperbranched poly(aryl ether ketone)s were prepared by using different A₂/B₃ mass ratio. The structure of the B₃ monomer was confirmed by MS, ¹H NMR/IR. The glass transition temperatures of the HPAEK-F and HPAEK-OH are 114°C and 162°C respectively. Thermal stability of HPAEK-F is higher than HPAEK-OH. __________ Translated from Acta Scientianum Naturalium Universitatis Jilinensis, 2005, 5 (in Chinese)     

Unimolecular micelles and reverse micelles based on hyperbranched polyethers—Comparative study of AB2 + A‐R and A2 + B3 + A‐R type strategies

Core‐shell type hyperbranched polymers that are capable of forming unimolecular micelles and reverse micelles in aqueous and hydrocarbon medium, respectively, were synthesized via two approaches, namely AB₂ + A‐R and A₂ + B₃ + A‐R type copolymerizations. In case of micelle‐forming polymers, an AB₂ monomer carrying a decamethylene spacer was used along with heptaethylene glycol monomethyl ether (HPEG) as the A‐R type comonomer. One the other hand, for the preparation of reverse micelle‐forming polymers, an AB₂ monomer containing an oligo(oxyethylene) spacer was used along with cetyl alcohol as the A‐R type comonomer. The former was readily soluble in water while the latter was soluble in hydrocarbon solvents like hexane. NMR spectral studies confirmed that both the approaches generated highly branched structures wherein about 65–70% of the terminal B groups were capped by the A‐R comonomer. Dye‐uptake measurements revealed that the polymers prepared via the AB₂ + A‐R approach exhibited a significantly larger uptake compared with those prepared via the A₂ + B₃ + A‐R approach. This suggests that the AB₂ + A‐R approach generates hyperbranched polymers with better defined core‐shell topology when compared with polymers prepared via the A₂ + B₃ + A‐R approach, which is in accordance with previous studies that suggest that A₂ + B₃ approach yields polymers with significantly lower branching levels and consequently less compact structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 80–91, 2009     

Novel hyperbranched polymers as host materials for green thermally activated delayed fluorescence OLEDs

A series of novel hyperbranched polymers(HBPs) consisting of a 2,7-subsituted 9-(heptadecan-9-yl)-9H-carbazole unit(A_2+A_2') and a tetra-substituted green thermally activated delayed fluorescence(TADF) dye of 2,3,5,6-tetra(9Hcarbazol-9-yl)-4-pyridinecarbonitrile(4CzCNPy, B4) have been synthesized via Suzuki cross-coupling reaction following an "A2+A2'+B_4" method. The polymers are named according to the polymerization ratio of 4CzCNPy monomer(5 mol%, 10 mol% and 15 mol% for HBPs of P2-P4 respectively, and 0 mol% for the control linear polymer P1). Their thermal, optoelectronic and electrochemical properties have been characterized by a combination of techniques. All the polymers exhibit high thermal stability with the decomposition temperatures(Td) above 400 ℃ and glass transition temperatures(Tg) up to 98 ℃. Unfortunately, the incorporation of TADF moiety into these HBP materials induced non-TADF characteristics. However, when the HBPs functionalized as the host for our previously developed 4CzCNPy TADF dopant in solution processed devices, maximum external quantum efficiency of 5.7% and current efficiency of 17.9 cd/A have been achieved in P3-based device, which is significantly higher than those of 1.5% and 4.2 cd/A for the linear polymer P1.     

Preparation and characterization of hyperbranched polyaspartimides from bismaleimides and triamines

Hyperbranched polyaspartimides were successfully prepared from bismaleimides (A₂) and triamines (B₃) through the Michael addition reaction. Two bismaleimides of 4,4′‐bismaleimidodiphenylmethane (BMDM) and bis(3‐ethyl‐5‐methyl‐4‐ maleimidophenyl)methane (BEMM) and two triamines of tris(3‐aminophenyl)phosphine oxide (TAPPO) and tris(4‐aminophenyl)amine (TAPA) were employed in the preparation of these hyperbranched polyaspartimides. The chemical structures of the polymers were characterized with Fourier transform infrared (FTIR), ¹H and ³¹P NMR, and elemental analysis. Degrees of branching ranging from 0.51 to 0.69 were found with the polyaspartimides, ensuring their hyperbranched structure. The polymers also showed good solubility in common solvents, high glass‐transition temperatures of 256 °C, and excellent thermal stability above 370 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5921–5928, 2004     

Novel Copolymers of N‐(4‐Bromophenyl)‐2‐Methacrylamide with 2‐Acrylamido‐2‐Methyl‐1‐Propanesulfonic Acid

The new acrylamide monomer, N‐(4‐Bromophenyl)‐2‐methacrylamide (BrPMAAm) has been synthesized by reacting 4‐Bromoaniline with methacryloyl chloride in the presence of triethylamine(NR₃) at 0–5°C. The radical‐initiated copolymerization of (BrPMAAm), with 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) has been carried out in dimethylformamide (DMF) solution at 70±1°C using 2,2′‐azobisisobutyronitrile (AIBN) as an initiator with different monomer‐to‐monomer ratios in the feed. The copolymers were characterized by FTIR, ¹H‐ and ¹³C‐NMR spectroscopy. The copolymer composition was evaluated by nitrogen content (N for AMPS‐units) in polymers led to the determination of reactivity ratios. The monomer reactivity ratios for BrPMAAm (M₁)‐AMPS (M₂) pair were computed using the Fineman‐Ross (F‐R), Kelen‐Tüdös (KT) and Extended Kelen‐Tüdös (EKT) methods. These parameters were also estimated using a non‐linear computational fitting procedure, known as reactivity ratios error in variable model (RREVM). The mean sequence lengths determination indicated that the copolymer was statistically in nature. By TGA and DSC analyses, the thermal properties of the polymers have been studied. The antimicrobial effects of polymers were also tested on various bacteria, and yeast.     

Blue light‐emitting hyperbranched polymers using fluorene‐co‐dibenzothiophene‐S,S‐dioxide as branches

A series of blue light‐emitting hyperbranched polymers comprising poly(fluorene‐co‐dibenzothiophene‐S,S‐dioxide) as the branch and benzene, triphenylamine, or triphenyltriazine as the core were synthesized by an “A₂ + A₂' + B₃” approach of Suzuki polymerization, respectively. All resulted copolymers exhibited quite comparable thermal properties with the glass transition temperatures in the range of 59–68 °C and relatively high decomposition temperatures over 420 °C. Photoluminescent spectra exhibited slight variation with the molar ratio of the dibenzothiophene‐S,S‐dioxide unit and the size of the core units. Polymer light‐emitting devices demonstrated blue emission with excellent stability of electroluminescence. Copolymers based on smaller core units of benzene and triphenylamine exhibited enhanced device performances regarding to that of triphenyltriazine. With the device configuration of ITO/PEDOT:PSS/polymer/CsF/Al, a maximum luminous efficiency of 4.5 cd A^?1 was obtained with Commission Internationale de L'.Eclairage (CIE) coordinates of (0.16, 0.19) for the copolymer PFSO15B. These results indicated that hyperbranched structure can be a promising strategy to attain spectrally stable blue‐light‐emitting polymers with high efficiency. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1043–1051     

Hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s: Synthesis,characterization, end‐group modification,and optical properties

Novel AB₂‐type monomers such as 3,5‐bis(4‐methylolphenoxy)benzoic acid ( monomer 1 ), methyl 3,5‐bis(4‐methylolphenoxy) benzoate ( monomer 2 ), and 3,5‐bis(4‐methylolphenoxy)benzoyl chloride ( monomer 3 ) were synthesized. Solution polymerization and melt self‐polycondensation of these monomers yielded hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s. The structure of these polymers was established using FTIR and ¹H NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 2.0 × 10³ to 1.49 × 10⁴ depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End‐group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4‐(decyloxy)benzoic acid and methyl red dye. The end‐capping groups were found to change the thermal properties of the polymers such as T_g. The optical properties of hyperbranched polymer and the dye‐capped hyperbranched polymer were investigated using ultraviolet‐absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414–5430, 2008     

Synthesis of nonlinear optical polymers with large photoconductive sensitivity and transparency

Novel nonlinear optical (NLO) chromophore, 2-{3-[2-(4-methylsulfonylphenyl)vinyl]carbazol-9-yl}ethanol was synthesized and subsequently reacted with methacryloyl chloride to give a photoconducting NLO monomer ( M1 ). 2-Methylacrylic acid 2-[3-(diphenylhydrazonomethyl)carbazol-9-yl]ethyl ester ( M2 ) was also synthesized as a comonomer to enhance the carrier mobility of the NLO polymer. Photoconducting NLO polymers, P1 and P2 were obtained by the copolymerization of Ml with methyl methacrylate and M2 , respectively. These polymers were well soluble in organic solvents and showed glass transition at 177 °C and 196 °C, respectively. Polymer films of P1 and P2 were optically clear, and were transparent at wavelengths longer than 420 nm. The electro-optic coefficient (r₃₃) of poled P1 films was measured to be ∼5 pm/V at 632.8 nm. The photoconductive sensitivities of P1 and P2 were 6.2 × 10⁻¹⁴ S·cm⁻¹/mW·cm⁻² and 5.6 × 10⁻¹¹ S·cm⁻¹/mW·cm⁻².     

Synthesis,electrolyte properties and solar cell performance of hyperbranched poly(aryl-ether-urea)s

Hyperbranched poly(aryl-ether-urea)s with phenyl, N,N-dimethylamino ethyl and polyethylene oxide end-groups linked through urethane group – HBPEU-1, HBPEU-2 and HBPEU-3 respectively – were synthesized from an AB₂-type blocked isocyanate monomer and characterized by FT-IR, ¹H-NMR, SEC-MALLS, TGA and DSC techniques. The molecular weight of the polymers were found to be ranged from 4.9 × 10³ ? 1.96 × 10⁴ g/mol. The TGA results showed that the polymers decompose between 175°C – 220°C. In the DSC curves, HBPEU-1 and HBPEU-3 showed T_g at 160°C and 53°C respectively, whereas HBPEU-2 did not showed clear T_g. All the three polymers were converted into polymer electrolytes by doping with LiI/I₂. The doped polymers showed remarkably high ionic conductivity, up to 222 – 277 times compared to the un-doped polymers and the highest conductivity was observed with doped HBPEU-2. The TiO₂ based dye-sensitized solar cells (DSSCs) were fabricated using the doped polymer electrolytes and their performance was tested; HBPEU-2 showed good performance by yielding energy conversion efficiency (η) of 4.5%.     

Self‐controlled synthesis of hyperbranched poly(ether‐ketone)s from A2 + B3 approach in poly(phosphoric acid)

Self‐controlled synthesis of hyperbranched poly(ether‐ketone)s (HPEKs) were prepared from “A₂ + B₃” approach by using different monomer solubility in reaction medium. 1,3,5‐Triphenoxybenzene as a hydrophobic B₃ monomer was reacted with commercially available terephthalic acid or 4,4′‐oxybis(benzoic acid) as a hydrophilic A₂ monomer in a hydrophilic reaction medium, polyphosphoric acid (PPA)/phosphorous pentoxide (P₂O₅). The resultant HPEKs were soluble in various common organic solvents and had the weight‐average molecular weight in the range of 3900–13,400 g/mol. The results implied that HPEKs were branched structures instead of crosslinked polymers. The molecular sizes and shapes of HPEKs were further assured by morphological investigation with scanning electron microscopy (SEM) and atomic force microscopy (AFM). Hence, the applied polymerization condition was indeed strong enough to efficiently facilitate polycondensation via “direct” Friedel‐Crafts reaction without gelation. It could be concluded that the polymer forming reaction was kinetically controlled by automatic and slow feeding of the hydrophobic B₃ monomer into the hydrophilic reaction mixture containing hydrophilic comonomer. As a result, hyperbranched structures were formed instead of crosslinked polymers even at full conversion (equifunctional monomer feed ratio). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3326–3336, 2009     

Synthesis of hyperbranched polymers from vegetable oil based monomers via ozonolysis pathway

In this work, a variety of hyperbranched polymers (HBPs), such as hyperbranched polycarbonates, polyesters, polyurethanes and polyacetals, was successfully synthesized from castor oil and soybean oil based monomers via a A₂ + B₃ polycondensation. First, B₃ monomer triols (TriOL), trialdehydes (TriAD), and tricarboxylic acids (TriAC) were obtained by ozonolysis of castor oil and soybean oil with following reductive or oxidative treatment. Their structures were characterized by ¹H NMR and ATR‐FTIR spectroscopy as well as electrospray ionization‐Time of Flight‐mass spectrometry. These trifunctional B₃ monomers were applied in the preparation of HBPs. The resulting HBPs had number averaged molar mass (M_n) up to 9400 g/mol and weight averaged molar mass (M_w) up to 40,000 g/mol. Through adjusting the initial molar ratio of A₂ to B₃ monomers, hydroxyl terminated (from TriOL monomers) or carboxylic acid (from TriAC monomers) terminated HBPs could be obtained. All the HBPs were characterized by ¹H NMR, size exclusion chromatography, and DSC. These HBPs are potential candidates for the synthesis of cross‐linked polymeric materials or in biomedical applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2104–2114     

Thermoreversible nonlinear diels‐alder polymerization of furan/plant oil monomers

Novel trifunctional monomers based on renewable resources were prepared and subsequently polymerized via the Diels‐Alder (DA) polycondensation between furan and maleimide complementary moieties. Three basic approaches were considered for these nonlinear DA polycondensations, namely the use of (i) a bisfuran monomer in combination with a trismaleimide (A₂ + B₃ system) and (ii) a trisfuran monomer in conjunction with a bismaleimide (A₃ + B₂ system) leading to branched or crosslinked materials, and (iii) the use of monomers incorporating both furan and maleimide end groups (A₂B or AB₂ systems), which lead to hyperbranched structures. The application of the retro‐DA reaction to the ensuing polymers confirmed their thermoreversible character. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Hyperbranched poly(ether–urea)s using AB2‐type blocked isocyanate monomer and azide monomer: Synthesis,characterization, reactive end functionalization,and copolymerization with AB monomer

3,5‐bis(4‐aminophenoxy)phenyl phenylcarbamate—a novel AB₂‐type blocked isocyanate monomer and 3,5‐bis{ethyleneoxy(4‐aminophenoxy)}phenyl carbonyl azide—a novel AB₂‐type azide monomer were synthesized in high yield. Step‐growth polymerization of these monomers were found to give a first example of hyperbranched poly (aryl‐ether‐urea) and poly(aryl‐alkyl‐ether‐urea). Molecular weights (M_w) of the polymer were found to vary from 1,858 to 52,432 depending upon the monomer and experimental conditions used. The polydispersity indexes were relatively narrow due to the controlled regeneration of isocyanate functional groups for the polymerization reaction. The degree of branching (DB) was determined using ¹H‐NMR spectroscopy and the values ranged from 87 to 54%. All the polymers underwent two‐stage decomposition and were stable up to 300 °C. Functionalized end‐capping of poly(aryl‐ether‐urea) using phenylchloroformate and di‐t‐butyl dicarbonate (Boc)₂O changed the thermal properties and solubility of the polymers. Copolymerization of AB₂‐type blocked isocyante monomer with functionally similar AB monomer were also carried out. The molecular weights of copolymers were found to be in the order of 6 × 10⁵ with narrow dispersity. It was found that the T_g's of poly(aryl‐alkyl‐ether‐urea)s were significantly less (46–49 °C) compared to poly(aryl‐ether‐urea)s. Moreover the former showed melting transition at 154 °C, which was not observed in the latter case. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2959–2977, 2007     

Preparation of HPEEK by Oligomer A2+B3 Approach

A series of hyperbranched poly(ether ether ketones) with different chain length between branching point (L) were prepared using a A₂+B₃ methodology, in which the A₂ is hydroxyl‐terminated PEEK oligomer. The L affects the properties of the polymers such as the inherent viscosity, the degree of crystallinity, the thermal properties of the polymers etc. The polymer with a L₂≈8 had T _g (122.4°C), T _c (200.2°C), and broad T _m (247.4°C). With the increment of L, up to the point L₂≈20 and L₂≈35, the polymers become semi‐crystalline, with a melting point of 300.9°C and 317.9°C, respectively. Their wide angle X‐ray scattering (WAXS) pattern indicated that their crystal structure is exactly the same as that of the linear homopolymer.     

s‐Triazine‐based hyperbranched polyethers: Synthesis,characterization, and properties

A series of s‐triazine‐based hyperbranched polyethers (HBPE) have been synthesized to obtain thermostability but flexible polymers by an interfacial polycondensation of different diols as A₂ and cyanuric chloride as B₃ monomers using A₂ + B₃ approach in the presence of a phase transfer catalyst. The polymerization reaction parameters are optimized, and the results indicate that the optimum conditions for the interfacial polycondensation are a 2:3 mole ratio of cyanuric chloride to diol using butanediol, benzyldimethylhexadecyl ammonium chloride as the catalyst, dichloromethane as the organic solvent, and a three‐step procedure with keeping the reaction mixture at different low temperatures for 2h/2h/5h. Other techniques such as high‐temperature solution, one‐step polycondensation, and transesterification were also carried out to synthesize the HBPE but proved to be not suitable due to large number of side reactions. The synthesized polymers were characterized by FTIR, ¹H NMR, and ¹³C NMR spectroscopy, hydroxyl number determination, solution viscosity measurements, and GPC analysis. The thermal behavior of the hyperbranched polymer was investigated by thermogravimetric analysis and differential scanning calorimetry. All the results were compared with those from an analogous linear polyether, obtained from 2‐methoxy‐4,6‐dichloro‐s‐triazine and butanediol by using the same polymerization technique. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3994–4004, 2010