Synthesis, structures, and reactivity of weakly coordinating anions with delocalized borate structure: the assessment of anion effects in metallocene polymerization catalysts.

The formation of adducts of tris(pentafluorophenyl)borane with strongly coordinating anions such as CN(-) and [M(CN)(4)](2)(-) (M = Ni, Pd) is a synthetically facile route to the bulky, very weakly coordinating anions [CN[B(C(6)F(5))(3)](2)](-) and [M[CNB(C(6)F(5))(3)](4)](2-) which are isolated as stable NHMe(2)Ph(+) and CPh(3)(+) salts. The crystal structures of [CPh(3)][CN[B(C(6)F(5))(3)](2)] (1), [CPh(3)][ClB(C(6)F(5))(3)] (2), [NHMe(2)Ph](2)[Ni[CNB(C(6)F(5))(3)](4)].2Me(2)CO (4b.2Me(2)CO), [CPh(3)](2)[Ni[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (4c.2CH(2)Cl(2)), and [CPh(3)](2)[Pd[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (5c.2CH(2)Cl(2)) are reported. The CN stretching frequencies in 4 and 5 are shifted by approximately 110 cm(-1) to higher wavenumbers compared to the parent tetracyano complexes in aqueous solution, although the M-C and C-N distances show no significant change on B(C(6)F(5))(3) coordination. Zirconocene dimethyl complexes L(2)ZrMe(2) [L(2) = Cp(2), SBI = rac-Me(2)Si(Ind)(2)] react with 1, 4c or 5c in benzene solution at 20 degrees C to give the salts of binuclear methyl-bridged cations, [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] and [(L(2)ZrMe)(2)(mu-Me)](2)[M[CNB(C(6)F(5))(3)](4)]. The reactivity of these species in solution was studied in comparison with the known [[(SBI)ZrMe](2)(mu-Me)][B(C(6)F(5))(4)]. While the latter reacts with excess [CPh(3)][B(C(6)F(5))(4)] in benzene to give the mononuclear ion pair [(SBI)ZrMe(+).B(C(6)F(5))(4)(-)] in a pseudo-first-order reaction, k = 3 x 10(-4) s(-1), [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] reacts to give a mixture of L(2)ZrMe(mu-Me)B(C(6)F(5))(3) and L(2)ZrMe(mu-NC)B(C(6)F(5))(3). Recrystallization of [Cp' '(2)Zr(mu-Me)(2)AlMe(2)][CN[B(C(6)F(5))(3)](2)] affords Cp' '(2)ZrMe(mu-NC)B(C(6)F(5))(3) 6, the X-ray structure of which is reported. The stability of [(L(2)ZrMe)(2)(mu-Me)](+)X(-) decreases in the order X = [B(C(6)F(5))(4)] > [M[CNB(C(6)F(5))(3)](4)] > [CN[B(C(6)F(5))(3)](2)] and increases strongly with the steric bulk of L(2) = Cp(2) < SBI. Activation of (SBI)ZrMe(2) by 1 in the presence of AlBu(i)(3) gives extremely active ethene polymerization catalysts. Polymerization studies at 1-7 bar monomer pressure suggest that these, and by implication most other highly active ethene polymerization catalysts, are strongly mass-transport limited. By contrast, monitoring propene polymerization activities with the systems (SBI)ZrMe(2)/1/AlBu(i)(3) and CGCTiMe(2)/1/AlBu(i)(3) at 20 degrees C as a function of catalyst concentration demonstrates that in these cases mass-transport limitation is absent up to [metal] approximately 2 x 10(-5) mol L(-1). Propene polymerization activities decrease in the order [CN[B(C(6)F(5))(3)](2)](-) > [B(C(6)F(5))(4)](-) > [M[CNB(C(6)F(5))(3)](4)](2-) > [MeB(C(6)F(5))(3)](-), with differences in activation barriers relative to [CN[B(C(6)F(5))(3)](2)](-) of DeltaDeltaG = 1.1 (B(C(6)F(5))(4)(-)), 4.1 (Ni[CNB(C(6)F(5))(3)](4)(2-)) and 10.7-12.8 kJ mol(-)(1) (MeB(C(6)F(5))(3)(-)). The data suggest that even in the case of very bulky anions with delocalized negative charge the displacement of the anion by the monomer must be involved in the rate-limiting step.     

Synthesis and structures of gold perfluorophthalimido complexes

Compounds of the new tetrafluorophthalimido anion, [C(6)F(4)(CO)(2)N](-), are readily accessible by treatment of tetrafluorophthalimide with either LiNPr(i)(2) or mixtures of NEt(3) and Me(3)ECl (E = Si or Sn), to give C(6)F(4)(CO)(2)N-X (X = Li 3, SiMe(3)4, and SnMe(3)5). The reaction of the trimethylsilyl derivative 4 with AgF leads cleanly to the ion pair complex [Ag(NCMe)(2)][Ag(N(CO)(2)C(6)F(4))(2)] (6·2MeCN), which contains a linear [Ag{N(CO)(2)C(6)F(4)}(2)](-) anion and a tetracoordinate Ag(+) cation. Compound 6 reacts with iodine to give the N-iodo compound C(6)F(4)(CO)(2)NI 7, which crystallises as an acetonitrile adduct. Treatment of 6 with LAuCl affords LAu{N(CO)(2)C(6)F(4)} (L = Ph(3)P 8a, Cy(3)P 8b, or THT 9), whereas the reaction with AuCl in acetonitrile affords the heterobinuclear compound [Ag(MeCN)(2)][Au{N(CO)(2)C(6)F(4)}(2)]·MeCN (10·3MeCN). The tetrafluorophthalimido ligand is not readily displaced by donor ligands; however, the addition of B(C(6)F(5))(3)(Et(2)O) to a diethyl ether solution of 8a leads to the salt [Au(PPh(3))(2)][N{COB(C(6)F(5))(3)}(2)C(6)F(4))] 11. The analogous reaction of (THT)Au{N(CO)(2)C(6)F(4)} with B(C(6)F(5))(3) in toluene in the presence of excess norbornene (nb) gives [Au(nb)(3)][N{COB(C(6)F(5))(3)}(2)C(6)F(4))] 12. Compounds 11 and 12 contain a new non-coordinating phthalimido-bridged diborate anion with O-bonded boron atoms. The crystal structures of compounds 2-11 are reported.     

The structure and chemistry of tris(pentafluorophenyl)borane protected mononuclear nitridotitanium complexes

Treatment of TiCl(NMe(2))(3) with H(3)N·B(C(6)F(5))(3) results in N-H activation and ligand exchange to yield the structurally characterised salt [TiCl(NMe(2))(2)(NMe(2)H)(2)](+)[Ti[triple bond]NB(C(6)F(5))(3)(Cl)(2)(NMe(2)H)(2)](-). Cation exchange with [Me(4)N]Cl, [Ph(4)P]Cl and [(PhCH(2))Ph(3)P]Cl yields the respective ammonium and phosphonium salts of the [Ti[triple bond]NB(C(6)F(5))(3)(Cl)(2)(NMe(2)H)(2)](-) anion. X-ray crystallography reveals that the essential trigonal bipyramidal geometry and composition of the anion is retained in each of these salts despite some minor variations in the Ti-N-B angle and the nature of the interionic interactions. Electronic investigation by DFT calculations confirmed the Ti-N triple bond character implied by the experimentally determined bond length, with the HOMO and HOMO-1 having Ti-N π-bonding character. The dimethylamine ligands of the anion resist substitution by moderate bases but can be displaced by pyridine to give a pentacoordinate anion. In contrast, addition of 2,2'-bipyridyl gives a neutral octahedral complex. Treatment of the pyridine complex with TlCp results in the formation of a four coordinate anionic cyclopentadienyl complex.     

Oxygen-bridged borate anions from tris(pentafluorophenyl)borane: synthesis, NMR characterization, and reactivity

The previously known anion [(C6F5)3B(mu-OH)B(C6F5)3]- (2) has been prepared by a two-step procedure, involving deprotonation of (C6F5)3BOH2 to give [B(C6F5)3OH]- (1), followed by addition of B(C6F5)3. The solution structure and the dynamics of 2 have been investigated by 1H and 19F NMR spectroscopy. The reaction of [NHEt3]2 with NEt3 resulted in the formation of [NHEt3]+ [(C6F5)3BOH]-, [NHEt3]+ [(C6F5)3BH]-, and (C6F5)3B- (CH2CH=N+ Et2). This indicates that in the presence of a nucleophile anion 2 can dissociate to B(C6F5)3 and 1. The reaction of [HDMAN]2 with 1,8-bis(dimethylamino)naphthalene (DMAN) confirmed this trend. In the presence of water, 2 transformed into the adduct [(C6F5)3BO(H)H...O(H)B(C6F5)3]- (3), containing the borate 1 hydrogen-bonded to a water molecule coordinated to B(C6F5)3. The same compound is formed by treating (C6F5)3BOH2 with 0.5 equiv of a base. A competition study established that for 1 the Lewis acid-base interaction with B(C6F5)3 is about 5 times preferred over H-bonding to (C6F5)3BOH2. The X-ray single-crystal analysis of [2-methyl-3H-indolium]3 provided the first experimental observation of an asymmetric H-bond in the [H3O2]- moiety, the measured O-H and H...O bond distances being significantly different [1.14(2) vs 1.26(2) A]. The reaction of NEt3 with an equimolar mixture of B(C6F5)3 and bis(pentafluorophenyl)borinic acid, (C6F5)2BOH, afforded the novel borinatoborate salt [NHEt3]+ [(C6F5)3BOB(C6F5)2]- ([NHEt3]4). X-ray diffraction showed that the B-O bond distances are significantly shorter than in [(C6F5)3B(mu-OH)B(C6F5)3]-. Variable-temperature 19F NMR revealed high mobility of the five aryl rings, at variance with the more crowded anion 2. 2D NMR correlation experiments showed that in CD2Cl2 the two anions [(C6F5)3BOH]- and [(C6F5)3BH]- form tight ion pairs with [NHEt3]+, in which the NH proton establishes a conventional (BO...HN) or an unconventional (BH...HN), respectively, hydrogen bond with the anion. The diborate anions 2-4, on the contrary, gave loose ion pairs with the ammonium cation, due both to the delocalized anionic charge and to the more sterically encumbered position of the oxygen atoms that should act as H-bond acceptors.     

Synthesis of the new, weakly coordinating anions [RB(C6F5)3]- (R = CH2Me, CHMe2, CH2CMe3); utilization of [HNMe2Ph][Me3CCH2B(C6F5)3] to activate zirconocene catalysts for propylene polymerization

The compound [HNMe2Ph][NpB(C6F5)3](Np =(CH3)3CCH2) reacts with dimethylzirconocenes to give active propylene polymerization catalysts which are significantly more active and give higher molecular weight polypropylene than do the catalysts obtained using B(C6F5)3; the [NpB(C6F5)3]- anion is for steric reasons more weakly coordinating than is [MeB(C6F5)3]-.     

C6F5Xe]+ and [C6F5XeNCCH3]+ salts of the weakly coordinating borate anions, [BY4]- (Y = CN, CF3, or C6F5)

New examples of [C6F5Xe]+ salts of the weakly coordinating [BY4]- (Y = CN, CF3, or C6F5) anions were synthesized by metathesis of [C6F5Xe][BF4] with MI[BY4] (MI = K or Cs; Y = CN, CF3, or C6F5) in CH3CN at -40 degrees C, and were crystallized from CH2Cl2 or from a CH2Cl2/CH3CN solvent mixture. The low-temperature (-173 degrees C) X-ray crystal structures of the [C6F5Xe]+ cation and of the [C6F5XeNCCH3]+ adduct-cation are reported for [C6F5Xe][B(CF3)4], [C6F5XeNCCH3][B(CF3)4], [C6F5Xe][B(CN)4], and [C6F5XeNCCH3][B(C6F5)4]. The [C6F5Xe]+ cation, in each structure, interacts with either the anion or the solvent, with the weakest cation-anion interactions occurring for the [B(CF3)4]- anion. The solid-state Raman spectra of the [C6F5Xe]+ and [C6F5XeNCCH3]+ salts have been assigned with the aid of electronic structure calculations. Gas-phase thermodynamic calculations show that the donor-acceptor bond dissociation energy of [C6F5XeNCCH3]+ is approximately half that of [FXeNCCH3]+. Coordination of CH3CN to [C6F5Xe]+ is correlated with changes in the partial charges on mainly Xe, the ipso-C, and N, that is, the partial charge on Xe increases and those on the ipso-C and N decrease upon coordination, typifying a transition from a 2c-2e to a 3c-4e bond.     

Intra- and intermolecular NMR studies on the activation of arylcyclometallated hafnium pyridyl-amido olefin polymerization precatalysts

Pyridyl-amido catalysts have emerged recently with great promise for olefin polymerization. Insights into the activation chemistry are presented in an initial attempt to understand the polymerization mechanisms of these important catalysts. The activation of C1-symmetric arylcyclometallated hafnium pyridyl-amido precatalysts, denoted Me2Hf{N(-),N,C(-)} (1, aryl = naphthyl; 2, aryl = phenyl), with both Lewis (B(C6F5)3 and [CPh3][B(C6F5)4]) and Br?nsted ([HNR3][B(C6F5)4]) acids is investigated. Reactions of 1 with B(C6F5)3 lead to abstraction of a methyl group and formation of a single inner-sphere diastereoisomeric ion pair [MeHf{N(-),N,C(-)}][MeB(C6F5)3] (3). A 1:1 mixture of the two possible outer-sphere diastereoisomeric ion pairs [MeHf{N(-),N,C(-)}][B(C6F5)4] (4) is obtained when [CPh3][B(C6F5)4] is used. [HNR3][B(C6F5)4] selectively protonates the aryl arm of the tridentate ligand in both precatalysts 1 and 2. A remarkably stable [Me2Hf{N(-),N,C2}][B(C6F5)4] (5) outer-sphere ion pair is formed when the naphthyl substituent is present. The stability is attributed to a hafnium/eta(2)-naphthyl interaction and the release of an eclipsing H-H interaction between naphthyl and pyridine moieties, as evidenced through extensive NMR studies, X-ray single crystal investigation and DFT calculations. When the aryl substituent is phenyl, [Me2Hf{N(-),N,C2}][B(C6F5)4] (10) is originally obtained from protonation of 2, but this species rapidly undergoes remetalation, methane evolution, and amine coordination, giving a diastereomeric mixture of [MeHf{N(-),N,C(-)}NR3][B(C6F5)4] (11). This species transforms over time into the trianionic-ligated [Hf{N(-),C(-),N,C(-)}NR3][B(C6F5)4] (12) through activation of a C-H bond of an amido-isopropyl group. In contrast, ion pair 5 does not spontaneously undergo remetalation of the naphthyl moiety; it reacts with NMe2Ph leading to [MeHf{N(-),N}NMe2C6H4][B(C6F5)4] (7) through ortho-metalation of the aniline. Ion pair 7 successively undergoes a complex transformation ultimately leading to [Hf{N(-),C(-),N,C(-)}NMe2Ph][B(C6F5)4] (8), strictly analogous to 12. The reaction of 5 with aliphatic amines leads to the formation of a single diastereomeric ion pair [MeHf{N(-),N,C(-)}NR3][B(C6F5)4] (9). These differences in activation chemistry are manifested in the polymerization characteristics of these different precatalyst/cocatalyst combinations. Relatively long induction times are observed for propene polymerizations with the naphthyl precatalyst 1 activated with [HNMe3Ph][B(C6F5)4]. However, no induction time is present when 1 is activated with Lewis acids. Similarly, precatalyst 2 shows no induction period with either Lewis or Br?nsted acids. Correlation of the solution behavior of these ion pairs and the polymerization characteristics of these various species provides a basis for an initial picture of the polymerization mechanism of these important catalyst systems.     

Diverse stereocontrol effects induced by weakly coordinating anions. Stereospecific olefin polymerization pathways at archetypal C(s)- and C(1)-symmetric metallocenium catalysts using mono- and polynuclear halo-perfluoroarylmetalates as cocatalysts

Counteranion effects on propylene polymerization rates and stereoselectivities are compared using Cs-symmetric Me2C(Cp)(Flu)ZrMe2 (1; Cp = C5H4,eta5-cyclopentadienyl; Flu = C13H8, eta5-fluorenyl) and C1-symmetric Me2Si(OHF)(CpR*)ZrMe2 (2; OHF = C13H16, eta5-octahydrofluorenyl; CpR* = eta5-3-(-)-menthylcyclopentadienyl) precatalysts activated with the mononuclear and polynuclear perfluoroarylborate, -aluminate, and -gallate cocatalysts/activators B(C6F5)3 (3), B(o-C6F5C6F4)3 (4), Al(C6F5)3 (5), Ph3C+B(C6F5)4- (6) Ph3C+FAl(o-C6F5C6F4)3- (7), Ga(C6F5)3 (8), and recently reported mono- and polymetallic trityl perfluoroarylhalometalates Ph3C+FB(C6F5)3- (9), Ph3C+FB(o-C6F5C6F4)3- (10), (Ph3C+)xFx[Al(C6F5)3]yx- (x = 1, y = 1, 11; x = 1, y = 2, 12; x = 2, y = 3, 13), Ph3C+(C6F5)3AlFAl(o-C6F5C6F4)3- (14), Ph3C+XAl(C6F5)3- (X = Cl, 15; X = Br, 16), and Ph3C+F[Ga(C6F5)3]2- (17). Temperature, propylene concentration, and solvent polarity dependence are surveyed in polymerizations catalyzed by 1 activated with cocatalysts 3-16 and with a 1:2 ratio of Ph3CCl and 5, and with a 1:2 ratio of Ph3CBr and 5, and by 2 activated with 3, 6, 7, 12, and 14. Remarkable stereocontrol with high activities is observed for 1 + 12 and 1 + 14. Polypropylene samples produced using C1-symmetric precatalyst 2 are subjected to microstructural analyses using stochastic models describing the relative contributions of enantiofacial misinsertion and backskip processes. A powerful technique is introduced for calculating interparametric correlation matrices for these nonlinear stochastic models. The collected results significantly extend what is known about ion-pairing effects in the case of Cs-symmetric precatalyst 1 and allow these findings to be applied to the case of C1-symmetric precatalyst 2 as an agent of isospecific propylene polymerization.     

Chiral fluorous dialkoxy-diamino zirconium complexes: synthesis and use in stereospecific polymerization of 1-hexene

New catalysts for the isospecific polymerization of 1-hexene based on cationic zirconium complexes incorporating the tetradentate fluorous dialkoxy-diamino ligands [OC(CF(3))(2)CH(2)N(Me)(CH(2))(2)N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(2)NO)(2-)] and [OC(CF(3))(2)CH(2)N(Me)(1R,2R-C(6)H(10))N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(Cy)NO)(2-)] have been developed. The chiral fluorous diamino-diol [(ON(Cy)NO)H(2), 2] was prepared by ring-opening of the fluorinated oxirane (CF(3))(2)COCH(2) with (R,R)-N,N'-dimethyl-1,2-cyclohexanediamine. Proligand 2 reacts cleanly with [Zr(CH(2)Ph)(4)] and [Ti(OiPr)(4)] precursors to give the corresponding dialkoxy complexes [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3) and [Ti(OiPr)(2)(ON(Cy)NO)] (4), respectively. An X-ray diffraction study revealed that 3 crystallizes as a 1:1 mixture of two diastereomers (Lambda-3 and Delta-3), both of which adopt a distorted octahedral structure with trans-O, cis-N, and cis-CH(2)Ph ligands. The two diastereomers Lambda-3 and Delta-3 adopt a C(2)-symmetric structure in toluene solution, as established by NMR spectroscopy. Cationic complexes [Zr(CH(2)Ph)(ON(2)NO)(THF)(n)](+) (n=0, anion=[B(C(6)F(5))(4)](-), 5; n=1, anion=[PhCH(2)B(C(6)F(5))(3)](-), 6) and [Zr(CH(2)Ph)(ON(Cy)NO)(THF)](+)[PhCH(2)B(C(6)F(5))(3)](-) (7) were generated from the neutral parent precursors [Zr(CH(2)Ph)(2)(ON(2)NO)] (H) and [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3), and their possible structures were determined on the basis of (1)H, (19)F, and (13)C NMR spectroscopy and DFT methods. The neutral zirconium complexes H and 3 (Lambda-3/Delta-3 mixture), when activated with B(C(6)F(5))(3) or [Ph(3)C](+)[B(C(6)F(5))(4)](-), catalyze the polymerization of 1-hexene with overall activities of up to 4500 kg PH mol Zr(-1) h(-1), to yield isotactic-enriched (up to 74 % mmmm) polymers with low-to-moderate molecular weights (M(w)=4800-47 200) and monodisperse molecular-weight distributions (M(w)/M(n)=1.17-1.79).     

Boron and aluminum complexes of sterically demanding phosphinimines and phosphinimides

Reactions of sterically demanding phosphinimines R3PNH [R=i-Pr (1), t-Bu (2)] were examined. Reactions with B(C6F5)3 formed the adducts (R3PNH)B(C6F5)3 [R=i-Pr (3), t-Bu (4)] in high yield. On the other hand, 2 reacts with HB(OBu)2, evolving H2 to give t-Bu3PNB(OBu)2 (5). The reaction of 2 equiv of 2 with BH3.SMe2 affords the species (t-Bu3PN)2BH (6). In contrast, the reaction of n-Bu(t-Bu)2PNH with BH3.SMe2 results in the formation of the robust adduct n-Bu(t-Bu)2PNH.BH3 (8). An alternative route to borane-phosphinimide complexes involves Me3SiCl elimination, as exemplified by the reaction of BCl2Ph with n-Bu3PNSiMe3, which gives the product n-Bu3PNBCl(Ph) (9). The corresponding reactions of the parent phosphinimines 1 and 2 with AlH3.NMe2Et give the dimers [(mu-i-Pr3PN)AlH2]2 (10) and [(mu-t-Bu3PN)AlH2]2 (11). Species 11 reacts further with Me3SiO3SCF3 to provide [(mu-t-Bu3PN)AlH(OSO2CF3)]2 (12). The reaction of the lithium salt [t-Bu3PNLi]4 (13) with BCl3 proceeds smoothly to give t-Bu3PNBCl2 (14), which is readily alkylated to give t-Bu3PNBMe2 (15). Subsequent reaction of 15 with B(C6F5)3 results in methyl abstraction and the formation of [(mu-t-Bu3PN)BMe]2[MeB(C6F5)3]2 (16). The reaction of 13 in a 2:1 ratio with BCl3 gives the salt [(t-Bu3PN)2B]Cl (17). This species can be methylated to give (t-Bu3PN)2BMe (18), which undergoes subsequent reaction with [Ph3C][X] (X=[B(C6F5)4], [PF6]) to form the related salts [(t-Bu3PN)2B][B(C6F5)4] (19) and [(t-Bu3PN)2B][PF6] (20), respectively. Analogous reactions with [Ph3C][BF4] afforded [t-Bu3PNBF2]2 (21). Compounds 3, 4, 6, 8, 11, 12, 17, 19, and 21 were characterized by X-ray crystallography.     

Benzyl anion abstraction from a (beta-diiminato)Fe(II) benzyl complex

The 3-coordinate 12 VE iron(II) benzyl complex [(nacnac)-Fe(CH2Ph)] reacts with B(C6F5)3 to yield a paramagnetic contact ion pair with an eta 2-(o,m)-[PhCH2B(C6F5)3] anion, which was characterised by X-ray diffraction.     

Generation of cationic [Zr-[tert-butyl enolate]] reactive species: methyl abstraction versus hydride abstraction

Treatment of the neutral methyl-Zr-enolate [Cp(2)Zr(Me)[O(tBuO)C=CMe(2)]] (1) with one equivalent of B(C(6)F(5))(3) or [HNMe(2)Ph][B(C(6)F(5))(4)] as a methyl abstractor in THF at 0 degrees C leads to the selective formation of the free ion pair complex [Cp(2)Zr(THF)[O(tBuO)C=CMe(2)]](+) [anion](-) (2) (anion=MeB(C(6)F(5))(3) (-), B(C(6)F(5))(4) (-)), which is relevant to the controlled polymerization of methacrylates. Cation 2 rapidly decomposes at 20 degrees C in THF with release of one equivalent of isobutene to form the cationic Zr-carboxylate species [Cp(2)Zr(THF)(O(2)CiPr)](+) (3), through a proposed intramolecular proton transfer process from the tert-butoxy group to the enolate. The reaction of 1 with one equivalent of B(C(6)F(5))(3) or [HNMe(2)Ph][B(C(6)F(5))(4)] in CH(2)Cl(2) leads to the direct, rapid formation of the dimeric micro-isobutyrato-Zr dicationic species [[Cp(2)Zr[micro-(O(2)CiPr)]](2)](2+) (4), which gives 3 upon dissolution in THF. Contrastingly, when [Ph(3)C][B(C(6)F(5))(4)] is used to generate the cationic Zr-enolate species from 1 in CD(2)Cl(2), a 15:85 mixture of dicationic complexes 4 and [[Cp(2)Zr[micro-(O(2)C-C(Me)=CH(2))]](2)](2+)[B(C(6)F(5))(4)]]2-(5-[B(C(6)F(5))(4)](2)) is obtained quantitatively. The formation of 5 is proposed to arise from initial hydride abstraction from a methyl enolate group by Ph(3)C(+), as supported by the parallel production of Ph(3)CH, and subsequent elimination of methane and isobutene. In addition to standard spectroscopic and analytical characterizations for the isolated complexes 2-5, complexes 4 and 5 have also been structurally characterized by X-ray diffraction studies.     

Reversible skeletal transmetalations of inorganic rings: isolation of aluminatophosphazenes, a zwitterionic phosphazene, and a donor-stabilized alumazine-phosphazene hybrid cation

Synthesis of the cyclic aluminatophosphazene ring N(PCl2NMe)2AlMeCl (5) has been achieved via a skeletal transmetalation reaction between AlMe3 and the boratophosphazene N(PCl2NMe)2BCl2 (1). Reaction of 5 with various halogenated Lewis acids such as GaCl3 yielded the fully chlorinated aluminum heterocycle N(PCl2NMe)2AlCl2 (8) through a methyl-halogen exchange process. In contrast, treatment of 5 with excess AlMe3 resulted in complete methylation at aluminum to give N(PCl2NMe)2AlMe2 (6). Compound 5 was reacted with various Ag+ salts with weakly coordinating anions, including Ag[OSO2CF3], which afforded the triflate-substituted heterocycle N(PCl2NMe)2AlMe(OSO2CF3) (9). The reaction of 5 with Ag[BF4] surprisingly produced the previously known fluorinated boratophosphazene N(PCl2NMe)2BF2 (10). The transformation of 1 to 5 and then to 10 represents a rare, formally reversible, skeletal transmetalation process involving boron and aluminum. Treatment of 5 with Ag[PF6] led to the insertion of phosphorus in place of aluminum to form the novel zwitterionic fluorinated phosphorus(V) heterocycle N(PCl2NMe)2PF4 (11). The ethyl-substituted aluminatophosphazene N(PCl2NMe)2AlMeEt (14) reacted cleanly with a 1:1 mixture of [Ph3C][B(C6F5)4] and THF to give the novel donor-stabilized alumazine-phosphazene hybrid cation, [7.THF]+, as the [B(C6F5)4]- salt [N(PCl2NMe)2AlMe.THF][B(C6F5)4] (15).     

Synthesis, characterization and ethylene reactivity of 2-diphenylphosphanylbenzamido nickel complexes

Addition of primary amines to N-[2-(diphenylphosphanyl)benzoyloxy]succinimide affords 2-diphenylphosphanylbenzamides, Ph2PC6H4C(O)NHR (R = C(CH3)3, 3; R = H, 4; R = CH2CH2CH3, 5; R = CH(CH3)2, 6). Addition of NiCl(eta3-CH2C6H5)(PMe3) to the deprotonated potassium salts of the amides and subsequent treatment of two equivalents of B(C6F5)3 to the resulting products furnishes eta3-benzyl zwitterionic nickel(II) complexes, [Ph2PC6H4C(O)NR-kappa2N,P]Ni(eta3-CH2C6H5) (R = C6H5, 9; R = C(CH3)3, 10; R = H, 11; R = CH2CH2CH3, 12; R = CH(CH3)2, 13). Solid structures of 9, 11, 13 and the intermediate eta1-benzyl nickel(II) complexes, [Ph2PC6H4C(O)NR-kappa2N,P]Ni(eta1-CH2C6H5)(PMe3) (R = C6H5, 7; R = C(CH3)3, 8) were determined by X-ray crystallography. When ethylene is added to the eta3-benzyl zwitterionic nickel(II) complexes, butene is obtained by the complexes 9-12 but complex 13 provides very high molecular-weight branched polyethylene (Mw, approximately 1300000) with excellent activity (up to 5200 kg mol-1 h-1 at 100 psi gauge).     

Diverse heteroleptic ytterbium(III) thiocyanate complexes by oxidation from bis(thiocyanato)ytterbium(II)

The new ytterbium(II) thiocyanate complex [Yb(NCS)2(thf)2] (1), synthesised by redox transmetallation between [Hg(SCN)2] and ytterbium metal in THF at room temperature, gave monomeric, eight coordinate [Yb-(NCS)2(dme)3] (2, dme = 1,2-dimethoxyethane) on crystallisation from DME, and is a powerful, synthetically useful reductant. Thus, oxidation of 1 with Hg(SCN)2, Hg(C6F5)2/HOdpp (HOdpp = 2,6-diphenylphenol), TlCp (Cp = C5H5 or CH3C5H4), Tl(Ph2pz) (Ph2pz = 3,5-diphenylpyrazolate) and CCl3CCl3 in THF yielded the ytterbium(II) complexes [Yb(NCS)3(thf)4] (3), [Yb-(NCS)2(Odpp)(thf)3](4), [Yb(NCS)2Cp-(thf)3] (Cp = C5H5 (5), CH3C5H4 (6)), [Yb(NCS)2(Ph2pz)(thf)4] (7) and [Yb(NCS)2Cl(thf)4] (8). In the solid state, complexes 4, 6 and 7 were shown by X-ray crystallography to be six, eight and eight coordinate monomers, respectively. Exclusively terminal, N-bound transoid thiocyanate bonding is observed with eta1-Odpp (4), eta5/-C5H4Me (6) and eta2-Ph2Pz (7) ligands attached approximately perpendicular to the N...N vector. The chloride complex 8 is not a molecular species, but consists of discrete, seven coordinate [YbCl2(thf)5] cations and [Yb(NCS)4(thf)3] anions. By contrast, oxidation of 1 with TlO2CPh gave a mixture of [[Yb(NCS)-(O2CPh)2(thf)2]2] (9) and 3 through rearrangement of an initially formed [Yb(NCS)2(O2CPh)] species. The X-ray structure of 9 indicates a dimeric complex with a (Yb(mu-O2CPh)4Yb] core that contains both bridging bidentate and bridging tridentate benzoate groups, and with a terminal N-bound thiocyanate and two THF ligands on each ytterbium. Reduction of Ph2CO with 1 in THF yielded the dinuclear complex [[Yb(NCS)2(thf)3]2(mu-OC(Ph)2C(Ph)2O)] (10), in which two octahedral Yb centres are bridged by a 1,1,2,2-tetraphenylethane-1,2-diolate ligand, derived from reductive coupling of the benzophenone reagent.     

New routes to transition metal-carbido species: synthesis and characterization of the carbon-centered trigonal prismatic clusters [W(6)CCl(18)](n)(-) (n = 1, 2, 3)

Simultaneous reduction of WCl6 and CCl4 with bismuth metal at 400 degrees C affords a black solid, from which the new cluster [W6CCl18]2- is extracted into aqueous HCl. The cluster is isolated in 34% yield as (Bu4N)2[W6CCl18] and features a metal-metal bonded W6 trigonal prism centered by a carbon atom and surrounded by 12 edge-bridging and 6 terminal chloride ligands. A cyclic voltammogram of [W6CCl18]2- in DMF shows the cluster undergoes two reduction and two oxidation processes, suggesting five chemically accessible redox states. Consistent with this extensive electrochemistry, DFT calculations on the diamagnetic [W6CCl18]2- species reveal closely spaced frontier orbitals, with an a2' ' HOMO situated 0.61 and 0.71 eV below unoccupied e' ' and e' orbitals, respectively. Oxidation of the cluster by a single equivalent of NO+ gives [W6CCl18]1-, which, as expected on the basis of the [W6CCl18]2- HOMO character, possesses a less elongated W6 trigonal prism. Reduction of [W6CCl18]2- with a single equivalent of cobaltocene affords [W6CCl18]3-, wherein population of a low-lying e' orbital leads to a significant Jahn-Teller distortion.     

Novel ruthenium(II)2 carboxylates as catalysts for alkene metathesis

The reactions of [Ru-(=CHR)Cl2(PCy3)2] (1: R = Ph; 1a: R = -CH=CPh2) with silver salts of carboxylic acids afforded new dimeric complexes of the general formula [Ru2(=CHR)2-(R'CO2)2(mu-R'CO2)2(PCy3)2(mu-H2O)] (2: R = Ph, R' = CF3; 3: R = Ph, R' = C2F5; 4: R = -CH=CPh2, R' = CF3; 5: R = Ph, R' = C6F5; 6: R = -CH=CPh2, R' = C6F5; 7: R = -CH=CPh2, R'=CCl3) in good yields. With R' = CF3, C2F5 or CCl3 these complexes are active catalysts for metathesis of acyclic alkenes, including unsaturated fatty acid esters, as well as for ring closing metathesis. The reactivity of these complexes with bases and weak donor solvents has been studied and their half-life times in several media were determined.     

The role of halogenated carborane monoanions in olefin hydrogenation catalysed by cationic iridium phosphine complexes

Iridium hydridophosphine complexes of general formula [Ir(PR3)2H2(anion)](PR3= PPh3, PMe2Ph; anion =[1-closo-CB(11)H(6)Cl(6)]-, [1-closo-CB(11)H(6)I(6)]-, [BAr(F)4]-) have been prepared by hydrogenation of cyclooctadiene precursor complexes. Solid-state structures of selected examples of these complexes reveal intimate contacts between the carborane anion and cation, with the anion binding through two lower-hemisphere halogen ligands. In CD2Cl2 solution the very weakly coordinating anions [1-closo-CB(11)H(6)Cl(6)]- and [BAr(F)4]- are suggested to favour the formation of solvent complexes such as [Ir(PR3)2H2(solvent)n][anion], while the [1-closo-CB(11)H(6)I(6)]- anion forms a tightly bound complex with the cationic iridium fragment. Calculated DeltaG values for anion reorganisation in d8-toluene reflect this difference in interaction between the anions and cation. With the bulky anion [1-closo-CB(11)Me(5)I(6)]- different complexes are formed: Ir(PPh3)H2(1-closo-HCB(11)Me(5)I(6)) and [(PPh3)3Ir(H2)H2][1-closo-HCB(11)Me(5)I(6)] which have been characterised spectroscopically. Diffusion measurements in CD2Cl2 are also consistent with larger, solvent coordinated, complexes for the more weakly coordinating anions and a tighter interaction between anion and cation for [1-closo-CB(11)H(6)I(6)]-. All the complexes show some ion-paring in solution. Comparison with data previously reported for the [1-closo-CB(11)H(6)Br(6)]- anion shows that this anion--as expected--fits between [1-closo-CB(11)H(6)Cl(6)]- and [1-closo-CB(11)H(6)I(6)]- in terms of coordinating ability. Although not coordinating, the large [1-closo-CB(11)H(6)Cl(6)]- and [BAr(F)4)]- anions do provide some stabilisation towards the metal centre, as decomposition to the hydride bridged dimer [Ir2(PPh3)4H5]+ is retarded. This is in contrast to the [PF6]- salt where decomposition is immediate. As expected, complexes with the smaller phosphine PMe2Ph form tighter interactions with the carborane anions. These observations on the interaction between anion and cation in solution are reflected in benchmark hydrogenation studies that show a significant attenuation in rate of hydrogenation of cyclohexane on using the [1-closo-CB(11)H(6)I(6)]- anion or complexes with the PMe2Ph phosphine. We also comment on the reusability of the catalysts and their tolerance to water and oxygen impurities. Overall the catalyst with the [1-closo-CB(11)H(6)Br(6)]- anion shows the best combination of rate of hydrogenation, reusability and tolerance to impurities.     

Reactions of Zn bis-ferrocenyl-β-diketiminates with [Ph3C][B(C6F5)4

The ZnMe complexes of bis-ferrocenyl-β-diketiminate ligands are prepared and the reactions with [Ph(3)C][B(C(6)F(5))(4)] are found to yield the salts [H(Ph(3)C)C(MeC(N(C(5)H(4))FeCp)(2)ZnMe] [B(C(6)F(5))(4)] and [CH(2)=C(MeC(N(C(5)H(4))FeCp)(2)ZnMe][B(C(6)F(5))(4)], derived from electrophilic substitution and hydride abstraction.     

The metalla-Pinner reaction between Pt(IV)-bound nitriles and alkylated oxamic and oximic forms of hydroxamic acids

The nitrile ligands in the platinum(IV) complexes trans-[PtCl4(RCN)2] (R=Me, Et, CH2Ph) and cis/trans-[PtCl4(MeCN)(Me2SO)] are involved in a metalla-Pinner reaction with N-methylbenzohydroxamic acid (N-alkylated form of hydroxamic acid, hydroxamic form; F1), PhC(=O)N(Me)OH, to achieve the imino species [PtCl4[NH=C(R)ON(Me)C(=O)Ph]2 (1-3) and [PtCl4[NH=C(Me)ON(Me)C(=O)Ph](Me2SO)] (7), respectively. Treatment of trans-[PtCl4(RCN)2] (R=Me, Et) and cis/trans-[PtCl4(MeCN)(Me2SO)] with the O-alkylated form of a hydroxamic acid (hydroximic form), i.e. methyl 2,4,6-trimethylbenzohydroximate, 2,4,6-(Me3C6H2)C(OMe)=NOH (F2A), allows the isolation of [PtCl4[NH=C(R)ON=C(OMe)(2,4,6-Me3C6H2)]2] (5, 6) and [PtCl4[NH=C(Me)ON=C(OMe)(2,4,6-Me3C6H2)](Me2SO)] (8), correspondingly. In accord with the latter reaction, the coupling of nitriles in trans-[PtCl4(EtCN)2] with methyl benzohydroximate, PhC(OMe)=NOH (F2B), gives [PtCl4[NH=C(Et)ON=C(OMe)Ph]2] (4). The addition proceeds faster with the hydroximic F2, rather than with the hydroxamic form F1. The complexes 1-8 were characterized by C, H, N elemental analyses, FAB+ mass-spectrometry, IR, 1H and 13C[1H] NMR spectroscopies. The X-ray structure determinations have been performed for both hydroxamic and hydroximic complexes, i.e. 2 and 6, indicating that the imino ligands are mutually trans and they are in the E-configuration.