Numerical simulation of unsteady vortex structures in near wake of poorly streamlined bodies on multiprocessor computer system

On the basis of the conservative difference method, spatially unsteady flows near complexly shaped objects are studied. The mathematical model is based on the inviscid gas model. For subsonic, transonic, and supersonic regimes, the nonstationary aerodynamics of various aerospace objects is examined. The three-dimensional structure of the unsteady vortex near wake and its influence on the basic aerodynamic characteristics of aerial vehicles are visualized. The numerical simulation is performed using parallel algorithms on supercomputers of cluster architecture.     

风力机气动噪声研究现状与发展趋势

首先介绍风力机气动噪声源的基本组成,然后对风力机气动噪声理论预测、实验测试和数值模拟方法进行阐述,重点论述这3类方法在风力机气动噪声研究中的应用现状,并讨论风力机气动噪声抑制技术,最后简要展望风力机气动噪声研究的发展趋势     

Research status and trend of wind turbine aerodynamic noise?

The main components of the wind turbine aerodynamic noise are introduced. A detailed review is given on the theoretical prediction, experimental measurement, and numerical simulation methods of wind turbine noise, with speci?c attention to appli-cations. Furthermore, suppression techniques of wind turbine aerodynamic noise are discussed. The perspective of future research on the wind turbine aerodynamic noise is presented.     

开敞式索膜结构的气动失稳临界风速

考虑几何非线性的影响,利用无限薄的旋涡薄层模拟气流在结构表面形成的扰动,由非稳态Bernoulli方程和环量定理将空气压力表示成旋涡密度的函数;然后由涡格法结合耦合边界条件求出旋涡密度,根据系统的稳定性判据得到结构发散失稳临界风速的解析表达式．通过三维开敞式膜结构的计算分析,发现空间膜结构的曲率是影响结构气动失稳临界风速的主要因素．     

Progresses in application of computational ?uid dynamic methods to large scale wind turbine aerodynamics?

The computational ?uid dynamics (CFD) methods are applied to aerody-namic problems for large scale wind turbines. The progresses including the aerodynamic analyses of wind turbine pro?les, numerical ?ow simulation of wind turbine blades, evalu-ation of aerodynamic performance, and multi-objective blade optimization are discussed. Based on the CFD methods, signi?cant improvements are obtained to predict two/three-dimensional aerodynamic characteristics of wind turbine airfoils and blades, and the vorti-cal structure in their wake ?ows is accurately captured. Combining with a multi-objective genetic algorithm, a 1.5 MW NH-1500 optimized blade is designed with high e?ciency in wind energy conversion.     

Progress in wind tunnel experimental techniques for wind turbine?

Based on the unsteady aerodynamics experiment (UAE) phase VI and the model experiment in controlled conditions (MEXICO) projects and the related research carried out in China Aerodynamic Research and Development Center (CARDC), the recent progress in the wind tunnel experimental techniques for the wind turbine is sum-marized. Measurement techniques commonly used for di?erent types of wind tunnel ex-periments for wind turbine are reviewed. Important research achievements are discussed, such as the wind tunnel disturbance, the equivalence of the airfoil in?ow condition, the three-dimensional (3D) e?ect, the dynamic in?ow in?uence, the ?ow ?eld structure, and the vortex induction. The corresponding research at CARDC and some ideas on the large wind turbine are also introduced.     

翼型绕流干涉噪声的实验与数值研究

来流湍流干扰噪声在风力机叶片气动总噪声级中占有重要地位．选取圆柱/翼型干涉模型从实验和数值两方面研究此类干涉发声现象．实验中通过对翼型表面非定常载荷的测量,重点研究了圆柱位置和翼型攻角的影响,选取的翼型包括两个NACA系列翼型（NACA0012和NACA0018）和两个风力机翼型（s809和s825）,同时利用PIV（particle image velocimetry）技术对低攻角状态下翼型的前缘流场进行了研究．实验结果表明翼型表面非定常压力与圆柱涡脱落存在一定相关性．与此同时采用非定常Reynolds平均(URANS)方法对圆柱/NACA0012翼型的干涉流场进行了非定常数值模拟,并将得到的翼型表面压力频谱与实验结果进行了对比．     

Computational aero-acoustic analysis of a passenger car with a rear spoiler

This study proposes an effective numerical model based on the Computational Fluid Dynamics (CFD) approach to obtain the flow structure around a passenger car with wing type rear spoiler. The topology of the test vehicle and grid system is constructed by a commercial package, ICEM/CFD. FLUENT is the CFD solver employed in this study. After numerical iterations are completed, the aerodynamic data and detailed complicated flow structure are visualized using commercial packages, Field View and Tecplot. The wind effect on the aerodynamic behavior of a passenger car with and without a rear spoiler and endplate is numerically investigated in the present study. It is found that the installation of a spoiler with an appropriate angle of attack can reduce the aerodynamic lift coefficient. Furthermore, the installation of an endplate can reduce the noise behind the car. It is clear that the vertical stability of a passenger car and its noise elimination can be improved. Finally, the aerodynamics and aero-acoustics of the most suitable design of spoiler is introduced and analyzed.     

大型近海水平轴风力机转轮的空气动力学性能优化判据

以近海风能工程为研究目标,对具有不同特性参数（设计风速、叶尖线速度和转轮实度）的大容量（1～10 MW）风力机转轮的气动性能与几何特性进行分析与研究．首先提出大型机组转轮气动性能优化判据:在其直径最小的前提下具有尽可能高的年可用风能特性因数以及与之相关的风能利用系数,因而可捕获最多风能,使年发电量最大．接着给出影响它的几个主要气动参数,如转轮设计风速、叶尖线速度以及转轮实度,并分析风力机在近海气象条件下运转时上述两个气动指标随这些参数变化的规律．提供的气动分析方法及结果可作为大型近海风力机转轮气动性能的评价基础．     

大型水平轴风力机叶片气动弹性计算

给出了一种考虑几何非线性的大型风力机静、 动气动弹性一体化计算方法．采用涡尾迹方法进行风力机气动载荷计算．建立风力机风轮的三维壳模型．沿周向平均风力机叶片载荷并加载到结构模型进行非线性静气动弹性分析．基于动力学小扰动假设, 在静平衡构型下进行动力学线性化, 计算风轮固有振动特性．继而结合非定常涡尾迹方法计算风力机动气动弹性响应．计算了NH 1500叶片考虑几何非线性的静气动弹性位移和动气动弹性响应．结果表明,大型风力机叶片几何非线性较为明显地减小静气动弹性位移,同时降低动气动弹性的响应幅值．大型风力机气动弹性响应计算需要考虑几何非线性     

Aeroelastic behavior of a typical section with shape memory alloy springs: Modeling nonhomogeneous distribution of state variables

In this paper, a two-degree-of-freedom (namely, plunge and pitch) aeroelastic typical section with shape memory alloy helical springs in the pitch degree-of-freedom is modeled. A linear aerodynamic model is employed to predict the unsteady loads. The shape memory springs model is based on classical models modified by the von Mises pure shear assumption. Nonhomogeneous distributions of shear strain, shear stress and martensitic fraction in the wire cross-section are represented by axi-symmetric annular regions. The numerical predictions of the effects of pseudoelastic hysteresis of shape memory alloy springs on the aeroelastic behavior of the typical section when both the homogeneous and nonhomogeneous cross-sectional distributions are considered in the simulations are compared with experimental data obtained in wind tunnel tests. The nonhomogeneous assumption results in good agreement between numerical predictions and experiments. Both the numerical and experimental results show that the pseudoelastic hysteresis of SMAs can be employed as a passive alternative to modify the behavior of aeroelastic systems.     

Influence of turbulence on the performance of a laboratory scale HAWT

The oncoming wind to horizontal axis wind turbines (HAWT) may change its speed and direction stochastically in time. Hence, turbine blades are exposed to flows both with fluctuating angle of attack and fluctuating yaw angles. The modern wind turbines are reacting to those changes by pitch angle and torque control not only to exploit as much power as possible but also stabilize energy production and prevent any damage of the turbine. However, time scales of wind fluctuations and sudden changes of wind properties can be very short and with very high in amplitude. In the present study we focus on the influence of turbulence on the performance of a HAWT. Main motivation of the investigations is to figure out best strategies for the aerodynamic design of the blades operating under turbulent conditions. A laboratory scale HAWT and a performance measurement set-up are employed to measure the influence of the oncoming wind. The tests are conducted in the closed loop wind tunnel of our institute. The test section of the tunnel is 1.87 m in width, 1.4 m in height and 2 m in length. The rotor blades are specially designed and optimized for this wind tunnel and the generator used. The turbulence is generated by two static squared mesh grids; fine and coarse one. Hence, two mainly different turbulence scales are obtained. In addition, the distance between the wind-turbine and the grid is adjusted to have additional sub-turbulence scales for each grid. The turbulence is nearly isotropic and decays in the flow direction. The developments of Taylor's micro scale (λ_g) and integral scale (L_g) of the turbulence in the flow direction at various incoming wind velocities (8−16 m/s) are measured. Hence, the facility allows to expose the wind-turbine to turbulence with various energy and length scale content. Those measurements are conducted with hot-wire anemometry in the absence of the wind-turbine. Upstream and downstream turbulence intensities (TI) distributions are measured to give insight on the surrounding free stream and turbine wake interaction and how can different turbulence eddies scales contribute in the influence of the performance of the turbine. Performance measurements are conducted with and without turbulence and the results are compared. The study shows that the higher the turbulence, the more the power extracted by the turbine. This is due to the higher interaction of large eddies with the turbine wake and with the boundary layer, which helps to keeping it attached. Furthermore, higher TI's help in suppressing the tip vortex, thus, reduce turbine tip losses. (© 2014 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of pitching on performance of VAWTs

Self- starting is the major obstacle to be overcome for successful design of a vertical axis wind turbine (VAWT). In the past has been suggested that pitching the turbine blades such that pitch angle is not 90 degrees allows for self-starting. To understand the physics surrounding pitching, an analysis is carried out for a common airfoil profile, NACA 0012. The vortex model is used to predict aerodynamic performance of VAWT with pitched blades at various angles. As a result of the analysis carried out for the airfoil at various pitch angles, it was shown that the “dead band” phenomenon could be overcome, but only slightly. At the same time, to overcome the “dead band” with a level on confidence, torques in the tip speed ratio (TSR ) range of 0.75 to 2.75 must be increased to values further above zero. The paper aimed at giving an insight into the small wind turbine starting behavior and its influence parameters. (© 2013 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

风力机叶型增升及叶尖流动控制研究

研究了两种改善风力机叶型气动性能的流动控制技术,分别对风力机专用S809翼型和较大升阻比的FX 60-100翼型进行应用研究．首先,通过在叶型前缘加装流动偏转器,研究流动偏转器对叶型流动分离的控制效果．并采用多岛基因算法,对流动偏转器进行多参数优化．结果表明:流动偏转器可以有效控制叶型的失速特性,推迟失速攻角和增加升力;基因优化算法能更大地提升流动偏转器的控制效果．其次,基于对风力机叶尖旋涡和尾涡特征以及叶片表面压力分布的分析,在叶片尖部加装不同倾斜角的旋涡扩散器控制叶尖涡．结果表明:涡扩散器能够提高叶尖涡涡核的总压,削弱其旋涡强度,使风力机尾流旋涡耗散更快,从而可以减小噪声,提高叶片效率．     

基于外场实验的风力机叶片三维效应研究

针对一台33 kW水平轴风电机组开展了外场实验,得到其叶片7个断面翼型的压力分布曲线;基于求解时均N-S方程对风轮进行三维数值模拟,以及将叶片各断面作为二维翼型进行数值计算,分别得到各断面翼型的压力分布曲线及升阻力系数．通过将外场实验、三维和二维数值计算所得压力分布曲线及升阻力系数进行对比分析,研究了三维效应对风力机气动性能的影响．研究表明,从叶尖到叶根各断面翼型的压差先增大后逐渐减小,叶片表面压力分布曲线比较明显地反映了从叶尖到叶根流动分离的变化;叶片表面压力分布的三维数值计算结果较二维计算结果更加接近于外场实验值;风力机叶片表面的三维流动对叶片的气动性能影响较大,在叶尖和叶根部分尤为突出.     

Numerical study of helicopter blade–vortex mechanism of interaction using the potential flow theory

The blade–vortex interaction (BVI) phenomenon plays a key role in the rotorcraft aerodynamics. Numerical investigations of BVI using classical CFD approaches are computationally expensive. In the present research we propose a numerical approach, based on the potential flow theory, for the numerical investigation of helicopter blade–vortex mechanism of interaction. This approach overcomes the computational expenses posed by the CFD techniques. The influence of vertical miss distance, angle of attack, airfoil camber, and vortex strength on the helicopter blade–vortex mechanism of interaction is subject of investigation. The study reveals that the magnitude of the aerodynamic coefficients decreases with the increase of vertical miss distance and angle of attack, and the decrease of vortex strength and core size.     

A numerical investigation on the dynamic stall of a vertical axis wind turbine

In the last years, for home user, the wind turbine with vertical axis (VAWT) began to be more attractive due benefits in exploitation. In terms of aerodynamics, when the wind speed approaches the speed of operation (low value of tip speed ratio -TSR) the blade airfoil exceeds the critical angle of incidence for static conditions. Angle of incidence varies quickly across blade and the blade works in dynamic stall condition. The goal of the present work is to investigate the two-dimensional dynamic stall phenomenon around the NACA 0012 airfoil at relatively low Reynolds. (© 2013 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Coupled Multibody‐Aerodynamic Simulation of High‐Speed Trains Manoeuvres

A co‐simulation MBS/CFD was implemented to investigate the effects of unsteady aerodynamic loads on the driving dynamics of high speed trains during common manoeuvres in absence of cross wind. A linear aerodynamic model, the panel method, was applied to the computation of the flow around the driving trailers and the multibody simulation program SIMPACK simulated the dynamic response of the vehicles to the resulting aerodynamic loads.