Synthesis and characterization of certain new poly(bisimide)s. I

Maleic and citraconic anhydrides were reacted with several diamines to obtain a novel class of high temperature resistant bisimides.^1–3 The bisimides were characterized by melting points, elemental analysis, UV–Vis, ¹H- and ¹³C-NMR, and mass spectral analysis. The bisimide monomers were then polymerized by the addition process. A poly(amidemaleimide) was also synthesized by reacting maleic anhydride with p-aminobenzhydrazide. The thermal stability of these highly crosslinked poly(bisimide)s were examined by TGA and DTA. A neat bisimide monomer obtained from 2,2′-bis[4(p-aminophenoxy)phenyl] propane with maleic anhydride namely, 2,2′-bis[4-(p-maleimidophenoxy)phenyl]propane was reacted with 2,2′-bis[4(p-aminophenoxy)phenyl]propane by the Michael reaction.⁴ A fiber glass cloth reinforced laminate was prepared from bismaleimide and amine mixture and the mechanical properties of the test laminate evaluated.     

Benzoxazine-bismaleimide blends: Curing and thermal properties

A blend of bisphenol A based benzoxazine (Bz-A) and a bismaleimide (2,2-bis[4(4-maleimidophenoxy) phenyl] propane (BMI), was thermally polymerised in varying proportions and their cure and thermal characteristics were investigated. The differential scanning calorimetric analysis, supplemented by rheology confirmed a lowering of the cure temperature of BMI in the blend implying catalysis of the maleimide polymerisation by benzoxazine. FTIR studies provided evidences for the H-bonding between carbonyl group of BMI and -OH group of polybenzoxazine in the cured matrix. The cured matrix manifested a dual phase behaviour in SEM and DMTA with the minor phase constituted by polybenzoxazine dispersed in an interpenetrating polymer network (IPN) of polybenzoxazine and cured BMI. The IPN possessed improved thermal stability over the constituent polybenzoxazine. A benzoxazine monomer possessing allyl functional groups, 2,2′-bis(8-allyl-3-phenyl-3,4-dihydro-2H-1,3-benzoxazinyl) propane (Bz-allyl) was reactively blended with the same bismaleimide in varying stoichiometric ratios (Bz-allyl/BMI), where the curing involved mainly Alder-ene reaction between allyl- and maleimides groups and ring-opening polymerisation of benzoxazine. The rheological analysis showed the absence of catalytic polymerisation of BMI in this case. The overall processing temperature was lowered in the blend owing to the co-reaction of the two systems to form a single-phase matrix. The cured resins of both Bz-A/BMI and Bz-allyl/BMI blends exhibited better thermal stability than the respective polybenzoxazines. The T_g of the IPN was significantly improved over that of polybenzoxazine (Bz-A). However, the co-reaction resulted in a marginal decrease in the T_g of the system in comparison to the polybenzoxazine (Bz-allyl).     

Thermal cross-link between 2,5-furandicarboxylic acid-based polyimides and bismaleimide via Diels–Alder reaction

A series of cross-linked polyimides (PIs) were prepared via two-step solution polycondensation from 2,2-bis[4-(3,4-dicarboxyphenoxy)phenyl]propane dianhydride (BPADA) and 2,5-furandicarboxylic acid-based diamines, N,N′-bis(4-amino-2-(trifluoromethyl)phenyl)furan-2,5-dicarboxamide (TFFDA) and N,N′-bis(4-aminophenyl)furan-2,5-dicarboxamide (p-FDDA), followed by thermal crosslinking reaction with bismaleimide. The thermal crosslinking reaction and its mechanism were studied by FTIR spectra and model reaction analysis, which showed Diels–Alder reaction between furan group and maleimide group played a main role in the thermal treatment. The properties of cross-linked PIs were characterized using dynamic mechanical thermal analysis, thermogravimetric analyses, tensile testing, ultraviolet-visible spectra, and wide-angle X-ray diffraction. The cross-linked polyimide film showed improved solvent-resistance, thermal and mechanical properties with T_g values of 234–306^oC, tensile strengths of 82–98 MPa and moduli of 2.3–3.0 GPa.     

Morphology controls of the melt blending in a novel highly crosslinked bismaleimide system

A novel bismaleimide of 2,2-bis[4-(4-maleimidophenoxy)phenyl]propane (BMIP) with a broad working-temperature-range for the melt blending was successfully synthesized. BMIP possesses a considerably broad working-temperature-range from 75 °C to 250 °C, prior to undergoing cure reactions to form a highly crosslinked network. The morphology types of cured BMIP/clay hybrids can be controlled by varying the shearing temperatures and the contents of the clay. The conditions necessary for achieving an exfoliated or an intercalated BMIP/clay hybrid were thoroughly investigated via X-ray diffractometry, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). All the uncured samples prepared at different shearing temperatures and with an adequate amount of MMT-C (above 3 phr) exhibited an intercalated form of morphology. However, the crosslinking reactions for specified samples prepared at relatively elevated shearing temperatures (above 120 °C) and with a relatively low content of clay (below 15 phr) resulted in morphology changes from the intercalated form to the exfoliated form of morphology. There exists an isotropically mechanical property for the cured matrix of the exfoliated hybrids whereas there exists an anisotropically mechanical property for the cured matrix of the intercalated hybrids.     

Synthesis of novel bismaleimide monomers based on fluorene cardo moiety and ester bond: Characterization and thermal properties

Two novel bismaleimide monomers based on fluorene cardo moiety and ester bonds, namely 9, 9-bis[4-(4-maleimidobenzoate) phenyl]fluorene (PEFBMI) and 9,9-bis[4-(4-maleimidobenzoate)-3-methylphenyl]fluorene (MEFBMI) were designed and synthesized. Their structures were confirmed by FTIR, ¹H-NMR, ¹³C-NMR spectroscopy and Elemental analysis. Both monomers obtained have excellent solubility in some organic solvents with low boiling point, including acetone, chloroform and dichloromethane. The curing process of the monomers were investigated by DSC, displaying that the melting point of the monomers were 157.1°C and 193.6°C respectively, and all processing windows exceed 30°C. DMA results showed the glass transition temperature of the cured PEFBMI/glass cloth composite was higher than 390°C while that of the cured PEFBMI composite was 349.2°C. TGA results indicated that the cured BMI resins have good thermal stability and their 5% weight loss temperatures were both higher than 410°C.     

The synthesis and thermal curing parameters of a novel quinoxaline monomer with terminal ethynyl thermoset and phenylethynyl intramolecular cycloaddition postcure capability

The Synthesis of 3,3′-bis(4-[3-ethynylphenoxy]phenyl)-7,7′-bis(phenylethynyl)-2,2′-diphenyl-6,6′-biquinoxaline (I) was accomplished by the reaction of 2,2′-bis(phenylethynyl)-5,5′-diaminobenzidine (II) and 4-(3-ethynylphenoxy)benzil. Thermal analysis of I indicated a softening temperature of 107°C, followed by an exotherm above 150°C that corresponded to a independent crosslinking reaction of the terminal acetylene groups and an intramolecular cycloaddition (IMC) reaction of the 2,2′-bis(phenylethynyl)biphenyl moieties. In the synthetic work substantial improvements were made in the synthesis of II. The sample of I was cured at 200°C and the maximum partially cured transition temperature attained was 280°C. A sample of 3,3′-bis(4,[3-ethynylphenoxy]phenyl)-2,2′-diphenyl-6,6′-biquinoxaline (IV) was similarly tested as a model without IMC capability and its corresponding value was 250°C. The difference between these two values is discussed briefly.     

Investigation of bismaleimide containing naphthalene unit. II. Thermal behavior and properties of polymer

Crosslinking of 2,7-bis(4-maleimidophenoxy)naphthalene (BMPN) and 4,4-bismaleimi-dophenylmethane (BMPM) was investigated in the presence of 4,4-diaminodiphenylmethane (DDM) at the 2/1 molar ratio of bismaleimide/DDM. Their curing behaviors were characterized by infrared spectroscopy and differential scanning calorimetry. The presence of a naphthalene group in the backbone of the bismaleimide increased the curing temperature and reduced the polymerization reactivity. The exotherm was shifted to a lower temperature as the amine addition lead to chain extension. Thermal behavior and properties of cured products were investigated by thermogravimetric analyses and dynamic mechanical analyses. Also, at this molar ratio, the properties of the BMPN/DDM showed better T_g, thermal decomposition temperature, and moisture resistance than the epoxy derived from 2,7-dihydroxynapthalene cured with DDM system (DGEDN/DDM). © 1996 John Wiley & Sons, Inc.     

Studies on the kinetics of curing and thermal stability of a novel tetrafunctional epoxy resin, N,N,N'',N−tetraglycidyl-2, 2-Bis-[4-(p-aminophenoxy)- phenyl]propane, using various amine curing-agents with or without fortifier

A novel tetrafunctional epoxy resin, N,N,N,Nt'-tetraglycidyl-2,2-bis[4-(p-aminophen-oxy)phenyl]propane, has been synthesised. The curing kinetics and thermal stability of the cured product have been investigated using various amine curing-agents. The overall activation energy for the curing reaction is observed to be in the range 30.3–126.2 kJ mol⁻¹. The cured products have good thermal stability.     

Synthesis of aromatic polyethers by Scholl reaction. VII. Oxidative polymerization of 2,2-bis[4-(1-naphthoxy)phenyl]propane and 2,2-bis [4-(1-naphthyl)phenyl]propane

The synthesis and the mechanism of oxidative polymerization of 2,2-bis[4-(1-naphthoxy)phenyl]propane ( 4 ) and 2,2-bis[4-(1-naphthyl)phenyl]propane ( 9 ) are presented. Both monomers polymerize by two different propagation steps. The first one represents a cation-radical dimerization of the naphthyl groups to dinaphthyl structure. H⁺[FeCl₄]^? generated from the first propagation step initiates a transalkylation reaction which provides structural units containing isopropylidenic groups inserted between phenyl and naphthyl, and between two naphthyl groups, respectively. Since the phenyl groups resulted from the second propagation reaction are unreactive in both the oxidative coupling and the transalkylation steps this polymerization reaction leads to polymers with low molecular weights containing phenyl chain ends.     

Silica-containing polyetherimide hybrid films based on methyltriethoxysilane as precursor of inorganic network

Polyetherimide hybrid films containing 5–40% silica were prepared through a sol-gel process and thermal imidization by using methyltriethoxysilane as precursor of the inorganic network and a poly(amic acid) resulting from polycondensation reaction of 2,2-bis[4-(4-aminophenoxy)phenyl]propane with 2,2-bis[(3,4-dicarboxyphenoxy)phenyl]propane dianhydride. The properties of these films, morphology, water vapor sorption capacity, free surface energy, mechanical, thermal and electrical characteristics, were studied. The films exhibited good thermal stability, having an initial decomposition temperature above 470 °C and glass transition temperature in the range of 187–200 °C. They showed low dielectric constant and low dielectric loss in a large frequency field. Gas permeation tests using small molecules (He, N₂, O₂ and CO₂) at 6 bar and 30 °C indicated that the hybrid films containing higher silica content showed higher permeability for all the tested gases.     

Cure mechanism of novel bismaleimide resins based on fluorene cardo moiety and their thermal properties

In this paper, two novel bismaleimide resins based on 9, 9-bis[4-(4-maleimidophenoxy) phenyl] fluorene (PFBMI), 9, 9-bis[4-(4-maleimidophenoxy)-3-methylphenyl]fluorene (MFBMI), and 2, 2’-diallyl bisphenol A (DABPA) were prepared. Their curing mechanism and curing kinetic were carefully investigated by Differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The thermal mechanical properties of the composites based on these BMI resins and the glass cloth were obtained by Dynamic mechanical analysis (DMA), displaying that the novel resins whose T_g were 296°C and 289°C had excellent thermal performance. In addition, Thermogravimetric analysis (TGA) results showed that both the cured PD and MD resins possessed good thermal stability, and their T_5% were all higher than 410°C.     

Isolation and Characterization of Badge Hydrolysis Products

Heating a suspension of Bisphenol A diglycidyl ether (BADGE) in 20 : 80 tetrahydrofuran/water at 70°C and subsequent passage of the resulting solution through C18 columns allowed isolation and purification to > 97% of each of the two hydrolysis products 2-[4-(2,3-dihydroxypropoxy) phenyl]-2-[4-(2,3-epoxypropoxy)phenyl]propane (1HP) and 2,2-bis[4-(2,3-dihydroxypropoxy)phenyl] propane (2HP), which were characterized by UV, IR, ₁H and _I3C NMR spectroscopy and mass spectrometry.     

Synthesis and Study of Poly(ether-amide)s Containing Aromatic and Aliphatic Ether-Amine Segment and Isophthalic Acid

The paper describes some physical properties of poly(ether-amide)s (PEAs) prepared by solution polycondensation reaction of ether-amines such as 2,7-bis(4-aminophenoxy) naphthalene, 2,2-bis[4-(4-aminophenoxy)phenyl] propane, 1,4-bis(4-aminophenoxy methyl) cyclohexane and isophthalic acid. Resulting PEAs are high yield and have inherent viscosity ranging between 0.68–0.75 dL/g. The etheramines containing wholly, semi aromatic and aliphatic-aromatic segments were prepared by using two steps reaction. FTIR, ¹H NMR, and elemental analyses were used for characterization of synthetic ether-amines and poly(ether-amide)s. PEAs films were prepared by solution casting technique then their thermal stability and mechanical properties were measured. TGA in nitrogen atmosphere shows that the PEAs are thermally stability, so 10% weight will be lost in the range of 335–358°C. Tensile strength and elongation at break of the PEA films ranged from 71.1–65.0 MPa and 6.48–8.41%, respectively.     

Synthesis,characterization, and thermal stability of bismaleimides derived from maleimido benzoic acid

Bismaleimides containing ester, amide, urethane, and imide groups in the backbone were synthesized from maleimido benzoic acid via its acid chloride or isocyanate with 4,4′-dihydroxy-diphenyl-2,2-propane, 3,3′-diamino diphenyl sulfone, and 3,3′,4,4′-benzophenone tetracarboxylic acid anhydride by simple condensation or addition reaction. The new bismaleimides are characterized by IR, ¹H-NMR, and elemental analysis. DSC studies of these bismaleimides indicated a curing exotherm in the temperature range 150–270°C with heat of polymerization 30–50 J/g. Thermogravimetric analysis of the uncured resins showed high thermal stability and char yield for imide containing bismaleimide. The observed char yields of the bismaleimide resins are in accordance with the calculated C/H ratios.     

Synthesis and characterization of polyimides with ether linkages

Thermoplastic and thermoset polyimides derived from 2,2-bis[4-(4-aminophenoxy)phenyl]propane (BAPP) and 4,4′-bis(4-aminophenoxy)-2,2′-dimethylbiphenyl (BAPD) were prepared and characterized. Their physical and thermal properties as well as the polyelectrolyte effect exhibited by BTDA–BAPP polyamic acids in NMP solution were discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2559–2567, 1999     

Phthalonitrile polymers: Cure behavior and properties

This article compares the cure behavior and properties of phthalonitrile polymers derived from three different monomers, namely, 4,4′-bis(3,4-dicyanophenoxy)biphenyl, 2,2-bis[4-(3,4-dicyanophenoxy)phenyl]hexafluoropropane and 2,2-bis[4-(3,4-dicyanophenoxy)phenyl]propane. Rheometric measurements with monomer melt in the presence of an aromatic diamine curing agent reveal that the rate of the cure reaction differs for the three monomers. The rate is dependent on the concentration of the curing agent. The glass transition temperature advances with increasing extent of cure and disappears upon postcure at temperatures in excess of 350°C. Based on thermogravimetric analysis, the thermal stability of all three polymers are comparable, whereas the fluorine-containing resin shows the best oxidative stability at elevated temperatures. Microscale calorimetric studies on all three polymers reveal that the char yields are high and the total heat release upon exposure to 50 kW/m² flux for each polymer is low, compared to other thermosets. Flexural strength ranges between 80–120 MPa. The water uptake under ambient conditions is less than 3% by weight after submersion in water for seven months. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2105–2111, 1999     

新型乙炔封端聚酰亚胺的制备及性能

用双酚A型二醚二酐(BPADA)和3-乙炔基苯胺(m-APA)进行缩聚反应合成了乙炔基封端的聚酰亚胺预聚体, 并对预聚体的熔体黏度、稳定性和热性能等进行研究. 结果表明, 此类预聚体具有较宽的加工窗口和较低的加工温度, 适合模压成型工艺制备树脂基复合材料. 预聚体经250 ℃固化后显示了优异的热性能, 动态力学分析显示其玻璃化转变温度为363 ℃, 在氮气和空气气氛下5%热失重温度分别为490和492 ℃.     

Nucleophilic substitution reactions of 1,4-dichlorobenzene chromium tricarbonyl with mono- and diphenoxides

The nucleophilic substitution reactions of 1,4-dichlorobenzene chromium tricarbonyl ( 1 ) with the phenoxide anion were investigated. The substitution of the first chlorine was very fast and gave the mono-substituted product in high yield. The substitution of the second chlorine group was significantly retarded by the presence of the phenoxy group incorporated during the first reaction and also due to the competing decomplexation reaction. The application of 1,4-dichlorobenzene chromium tricarbonyl ( 1 ) to the synthesis of new monomers was demonstrated by the preparation of 2,2′-bis[4-(4-chlorophenoxy)phenyl]propane ( 9 ). 2,2′-Bis[4-(4-chlorophenoxyl)phenyl]propane ( 9 ) was synthesized by a nucleophilic substitution reaction of 4,4′-isopropylidenediphenolate with 1,4-dichlorobenzene chromium tricarbonyl ( 1 ) followed by decomplexation with I₂. 2,2′-Bis[4-(4-chlorophenoxy)-phenyl]propane ( 9 ) was also synthesized via a three-step reaction starting from the nucleophilic substitution reaction of 4,4′-isopropylidenediphenol ( 7a ) with 1-chloro-4-nitrobenzene ( 10 ). 2,2′-Bis[4-(4-chlorophenoxy)phenyl]propane ( 9 ) was polymerized by a Ni(0)-catalyzed reaction to yield amorphous aromatic polyethers with number-average molecular weights of up to 11,200 g/mol. © 1993 John Wiley & Sons, Inc.     

Thermal Behaviour of Bisitaconimide and Bisnadimide Blends

This paper describes the thermal behaviour of blends of bisitaconimide (I) and bisnadimide (N) resins of similar structures. Bisitaconimides/bisnadimides based on 4,4'-diaminodiphenyl ether (E);2,2'-bis[4-(4-aminophenoxy)phenyl]propane (B); 1,3-bis(4-aminophenyl)benzene(R) and 1,4-bis(4-aminophenyl)benzene (H) were prepared and were designated as E-I/E-N; B-I/B-N; R-I/R-N and H-I/H-N respectively. Itaconimides had lower melting points and curing temperatures than that of corresponding nadimides. The blends of bisitaconimides and bisnadimides were prepared in the ratios of1:3, 1:1, 3:1 by solution mixing (chloroform/acetone). A decrease in the melting point and characteristic curing temperatures was observed in the blends. Thermal stability of cured resin blends was only marginally affected by the blend composition. This revised version was published online in July 2006 with corrections to the Cover Date.     

Spectroscopic, thermal and structural studies of cocrystal of 2,2′-diamino-4,4′-bis(1,3-thiazole) with 4,4′-bipyridine, 1,2-bis(4-pyridyl)ethylene and 1,3-bis(4-pyridyl)propane

Three new cocrystals based upon 2,2′-diamino-4,4′-bis(1,3-thiazole) (DABTZ) with 4,4′-bipyridine (4,4′-bipy), 1,2-bis(4-pyridyl)ethylene (bpe) and 1,3-bis(4-pyridyl)propane (bpp): [(DABTZ) (4,4′-bipy)], [(DABTZ) (bpe)] and [(DABTZ) (bpp)] have been synthesized and characterized by elemental analysis, IR-, ¹H NMR-, ¹³C NMR spectroscopy and studied by thermal and X-ray crystallography. Self-assembly of these compounds in the solid state is likely caused by both hydrogen bonding, and π-π stacking.