Copper(II) trans-bis-(glycinato): an efficient heterogeneous catalyst for cross coupling of phenols with aryl halides

Copper(II) trans-bis-(glycinato) complex, easily prepared by the solid state reaction of copper(II) acetate and glycine (trans-[Cu(glyo)₂·H₂O]) was found to be an efficient, recyclable, and high yielding catalyst for the Ullmann type synthesis of diaryl ethers via the cross coupling of phenols with aryl halides without using any additives at relatively low reaction temperature. The catalyst could easily be recovered by simple filtration and was reused for several runs with consistent catalytic activity.     

An efficient synthesis of 2-amino-4-aryl-6,7,8,9-tetrahydro-5H-benzo[7]annulene-1,3-dicarbonitriles in THF with DBU as catalyst

An efficient and convenient multicomponent reaction for preparation of 2-amino-4-aryl-6,7,8,9-tetrahydro-5H-benzo[7]annulene-1,3-dicarbonitrile derivatives, in THF, with DBU as catalyst is reported. These compounds are typical acceptor–donor–acceptor (A–D–A) systems comprising one electron donor and two electron acceptors with different important chemical properties. Excellent yields and the simplicity of the reaction procedure make this one of the most efficient methods for synthesis of these types of compound.     

Monodentate phosphorus-coordinated palladium(Ⅱ)complexes as new catalyst for Mizoroki-Heck reaction of aryl halides with electron-deficient olefins

Four novel monodentate phosphorus-coordinated palladium(Ⅱ) complexes derived from 3,5-disubstituted-1H-1,2,4-diazaphospholes were developed as efficient catalyst for Mizoroki-Heck reactions of aryl halides with electron-deficient olefins. The role of these monophosphine ligands in catalysis was illustrated by control experiments using Pd salt and ligands as combined catalyst.     

4-(Succinimido)-1-butane sulfonic acid as a Brönsted acid catalyst for synthesis of pyrano[4,3-b]pyran derivatives under solvent-free conditions

4-(Succinimido)-1-butane sulfonic acid as an efficient and reusable Brönsted acid catalyzed the synthesis of pyrano[4,3-b]pyran derivatives under solvent-free conditions. The catalyst can be prepared by mixing succinimide and 1,4-butanesultone that is more simple and safer than the preparation of succinimide sulfonic acid. This method has the advantages of high yield, clean reaction, simple methodology and short reaction time. The catalyst could be recycled without significant loss of activity.     

Copper Catalyzed Oxidative Esterification of Aldehydes with Alkylbenzenes via Cross Dehydrogenative Coupling

Copper(II) as the catalyst in a cross dehydrogenative coupling (CDC) reaction has been demonstrated for the synthesis of benzylic esters using aldehydes and alkylbenzenes as coupling partners.     

Efficient and green synthesis of dihydropyrimido[4,5-b]quinolinetriones using MWCNTs@TEPA/Co (II) as a novel and eco-friendly catalyst

A new heterogeneous nanocatalyst [MWCNTs@TEPA/Co (II)] was successfully prepared using multiwall carbon nanotubes (MWCNTs) as a suitable and efficient support for covalent anchoring of tetraethylene pentaamine (TEPA)/Co (II). The new heterogeneous catalyst was prepared through an easy and applicable method, and characterized by various techniques such as Fourier transform-infrared, thermogravimetric analysis, energy-dispersive X-ray spectroscopy, mapping, field emission-scanning electron microscopy, inductively coupled plasma-optical emission spectrometry and Brunauer−Emmett−Teller. Synthesized catalyst was used efficiently for the preparation of dihydropyrimido [4,5-b]quinolinetrione derivatives via the four-components reaction of barbituric acid, dimedone, aryl aldehyde and amines under thermal conditions. The nanostructure catalyst was easily recovered by filtration and reused several times without noticeable loss of its catalytic activity. Low amounts of catalyst (0.005 g), short reaction times and green conditions are some merits of the presented method.     

Copper-Catalyzed Cross-Coupling Reactions of Methyl 13-Iodo-O-methylpodocarpate and Amides

Copper iodide was utilized as a relatively inexpensive catalyst (versus palladium) for the high-yield synthesis of amide derivatives of podocarpic acid. The reaction involved the one-step cross-coupling reaction of methyl 13-iodo-O-methylpodocarpate with amides.     

氯化钌氨作前驱体制备高活性的氨合成催化剂

以氯化钌和水合肼反应制备了新型的氧化钌氨前驱体Ru(NH3)5Cl3.透射电镜和CO化学吸附结果表明,由Ru(NH3)5Cl3前驱体制备的活性炭(AC)负载的RuN/AC催化剂中.钌纳米粒子分散度高,粒径分布均匀.与以氯化钌为前驱体制备的Ru/AC催化剂相比,RuN/AC催化剂具有更高的氨合成活性,在10 MPa和10 000 h-1条件下活性增幅超过10%.     

4-(Succinimido)-1-butane sulfonic acid as a Bronsted acid catalyst for synthesis of pyrano[4,3-b]pyran derivatives under solvent-free conditions

4-(Succinimido)-1-butane sulfonic acid as an efficient and reusable Bronsted acid catalyzed the synthesis of pyrano[4,3-b]pyran derivatives under solvent-free conditions.The catalyst can be prepared by mixing succinimide and 1,4-butanesultone that is more simple and safer than the preparation of succinimide sulfonic acid.This method has the advantages of high yield,clean reaction,simple methodology and short reaction time.The catalyst could be recycled without significant loss of activity.     

Palladium-catalyzed convenient one-pot synthesis of multi-substituted 2-pyrones via transesterification and alkenylation of enynoates

An efficient one-pot protocol for the synthesis of multi-substituted 2-pyrone derivatives from internal alkynes and unactivated alkenes is reported. The methodology involves difunctionalization of internal alkynes by using Pd(II) as a catalyst alongwith X-Phos as ligand via 6-endo transesterification and subsequent alkenylation pathway. Notable features include simple and easily available starting materials, including a range of unactivated alkenes, reduced synthetic steps and mild reaction conditions with high efficiency.     

Scalable synthesis of substituted 2,7-dimethyl-9-phenylxanthen-9-ol (DMPx-OH): useful for the preparation of crystalline 5′-O-DMPx-protected nucleosides

A convenient single-step synthesis of several 2,7-dimethyl-9-phenylxanthen-9-ol (DMPx-OH) analogs has been accomplished using a Friedel-Crafts reaction. Treatment of various DMPx-OH with unprotected 2′-O-methoxyethyl-ribonucleosides (MOE) in the presence of B(C₆F₅)_3, as a Lewis Acid catalyst, furnished 5′-O-protected derivatives of 2′-MOE-ribonucleosides in good yields. The deprotection of the DMPx groups was accomplished by acid hydrolysis under very mild conditions. Among the five DMPx analogs synthesized, the 2,7-dimethyl-9-(4-nitrophenyl)xanthene-9-yl group furnished crystalline products enabling non-chromatographic isolation of 5′-O-protetced nucleosides.     

加热与超声辐照条件下4-(丁二酰亚胺基)-1-丁烷磺酸Brnsted酸催化剂催化吡喃并[4,3-b]吡喃衍生物合成(英文)

4-(Succinimido)-1-butane sulfonic acid was shown to be an efficient and reusable Brnsted acid catalyst for the synthesis of pyrano[4,3-b]pyran derivatives using thermal and ultrasonic conditions. The catalyst was prepared by mixing succinimide and 1,4-butanesultone, which is simpler and safer than the preparation of succinimide sulfonic acid. This method has the advantages of high yield, clean reaction, simple methodology, and short reaction time. The catalyst can be recycled without loss of activity.     

Synthesis of hindered chiral guanidine bases starting from (S)-(N,N-dialkyl-aminomethyl)pyrrolidines and BrCN

An efficient method for the preparation of hindered chiral guanidines using cyanogen bromide is described. The reaction between BrCN and vicinal diamines derived from (S)-2-(N,N-dialkyl-aminomethyl)-pyrrolidines provides chiral substituted cyanamides. The cyanamide derivatives reacted with secondary amines in hexafluoroisopropanol at reflux to form chiral hindered guanidines, which were isolated in good to excellent yields (70–96%). The chiral guanidines were prepared in an effort to design sophisticated chiral guanidine catalysts for asymmetric synthesis.     

Efficient catalysis of a Diels-Alder reaction by metallo-vesicles in aqueous solution

Vesicles have been prepared from a cyclic phosphate ester (5,5-di-n-dodecyl-2-hydroxy-1,3,2-dioxaphosphorinan-2-one) with copper(II) counterions (Cu(dDP)(2)). They form a highly efficient aqueous Lewis acid catalyst system. The reaction of two azachalcon derivatives (1a, 1b) with cyclopentadiene (2) was studied to elucidate the catalytic potential of this system.     

Synthesis and characterization of 9-methyl-2-morpholin-4-yl-8-substituted phenyl-1H-purine derivatives using polyphosphoric acid (PPA) as an efficient catalyst

We demonstrate the synthesis of various purine derivatives through the coupling of N⁴-methyl-2-morpholin-4-yl-pyrimidine-4,5-diamine with various aldehydes by using polyphosphoric acid (PPA) as an efficient catalyst in DMF at reflux temperature. The PPA catalyst gave better yields (70-85%) in short reaction times (45-60 min). This commercially available cheap catalyst is more active than many reported expensive catalysts. Many aldehydes underwent the above conversion to form a series of 9-methyl-2-morpholin-4-yl-8-phenyl-9H-purines.     

Efficient diverse approach for quinoxaline‐derived glycosylated and morphinylated analogs

Sulfanyl‐glycosides have been synthesized by reaction of 2,3‐dimercaptoquinoxaline ( 1 ) with acetohalo sugars in presence of base to give the thioglycosides‐derived quinoxalines 5 , 6 , 7 and 9 . Similarly, the acyclic analogs 23 , 24 , 25 , 26 were prepared by coupling of 1 with different acyclo‐alkylating agents. The preparation of 3‐morpholinyl‐quinoxalines 10 and 11 allowed the synthesis of 3‐glycosylsulfanyl‐2‐morpholinyl‐quinoxalines 12 , 13 , 14 and 17 as well as the acyclic analogs 27 , 28 , 29 . Microwave irradiation of the reactants turned out to be preferred over the conventional method for achieving the synthetic goals. This study made an available venue to the synthesis of diverse quinoxaline derivatives. J. Heterocyclic Chem., 2011.     

Synthesis of novel thienonorbornylpurine derivatives

The synthesis and antiviral evaluation of 6-amino- and 6-chloro-9-(exo-bicyclo[2.2.1]hept-2yl)-9H-purine derivatives with thiophene and tetrahydrothiophenes annelated to a norbornane moiety are described. The key step in the synthesis of derivatives with the symmetrically annelated thiophene was the Mitsunobu reaction of endo-4-thiatricyclo[5.2.1.0^2,6]deca-2,5-dien-8-ol with 6-chloropurine. The key alcohol was obtained by DDQ mediated aromatization of the corresponding tetrahydro derivatives, which were used for the preparation of the target tetrahydrothieno analogs. The key intermediate for the synthesis of derivatives with the asymmetrically annelated thiophene was 8-exo-azido-3-thiatricyclo[5.2.1.0^2,6]deca-2(6),4-diene, which was prepared from 5-exo-azido[2.2.1]heptan-2-one by aldol condensation with O-ethyl S-(2-oxoethyl) carbonodithioate, deprotection and cyclization. The target compounds were obtained by the construction of the purine base on an amine, which was obtained by LAH reduction of the key azide. The synthesized compounds were evaluated for antiviral and cytostatic activity.     

Catalytic activity of a zirconium(IV) Schiff base complex in facile and highly efficient synthesis of indole derivatives

Eight Schiff base compounds were prepared by condensation of 1-amino-2-propanol with different benzaldehydes in water. One of the Schiff bases, (z)-N-bezylidene-2-hydroxypropane-1-amine (HL¹), was used as a bidentate ligand for preparation of a zirconium complex (Zr(L¹)₂Cl₂). The complex has been used as a catalyst for efficient synthesis of wide variety of indole derivatives in EtOH under mild conditions. The turnover number and reusability of the catalyst indicate that it has high efficiency and is fairly stable under the reaction conditions.     

In situ prepared CuI nanoparticles on modified poly(styrene-co-maleic anhydride): an efficient and recyclable catalyst for the azide–alkyne click reaction in water

A facile, high-yielding and straightforward methodology for the copper-catalyzed synthesis of 1,4-disubstituted 1,2,3-triazoles in water, using in situ prepared copper nanoparticles (NPs) on modified poly(styrene-co-maleic anhydride) [SMA] catalyst, is reported. The polymer support was easily prepared from the reaction of SMA with 4-aminopyridine and subsequently underwent reaction with CuI NPs. The catalyst was applied for the preparation of triazoles under air, followed by chromatographic separation of the products. The polymer-supported catalyst not only showed high catalytic activity but also showed high 1,4-regioselectivity for the [3 + 2] Huisgen cycloaddition in water as solvent. The products were obtained in good to excellent yields in all cases. The catalyst can be used without pre-activation and reloaded for at least five runs without significant decrease in its activity. The catalyst was characterized by SEM, energy dispersive spectroscopy analysis of X-rays, and inductively coupled plasma.     

One-pot,four-component synthesis of 2H-indazolo[2,1-b]phthalazine-triones catalyzed by cellulose-SO3H as a reusable heterogeneous and efficient catalyst

A practical and green method for the synthesis of 2H-indazolo[2,1-b]phthalazine-1,6,11(13H)-trione derivatives using cellulose-SO₃H as a solid acidic catalyst for the four-component condensation reaction of hydrazinium hydroxide, phthalic anhydride, dimedone, and aromatic aldehydes under thermal solvent-free conditions is described. Cellulose-SO₃H as a recyclable green chemical compound has been demonstrated as a new catalyst for the synthesis of this class of compounds.