Photo-Fenton and photo-Fenton-like processes for the degradation of methyl orange in aqueous medium: Influence of oxidation states of iron

Degradation of methyl orange (MO) was carried out by the photo-Fenton process (Fe²⁺/H₂O₂/UV) and photo-Fenton-like processes (Fe³⁺/H₂O₂/UV, Fe²⁺/S₂O₈²⁻/UV, and Fe³⁺/S₂O₈²⁻/UV) at the acidic pH of 3 using hydrogen peroxide and ammonium persulfate (APS) as oxidants. Oxidation state of iron had a significant influence on the efficiency of photo-Fenton/photo-Fenton-like processes. It was found that a process with a source of Fe³⁺ ions as the catalyst showed higher efficiency compared to a process with the Fe²⁺ ion as the catalyst. H₂O₂ served as a better oxidant for both oxidation states of iron compared to APS. The lower efficiency of APS is attributed to the generation of excess protons which scavenges the hydroxyl radicals necessary for degradation. Further, the sulfate ions produced from S₂O₈²⁻ form a complex with Fe²⁺/Fe³⁺ ions thereby reducing the concentration of free iron ions in the solution. This process can also reduce the concentration of hydroxyl radicals in the solution. Efficiency of the various MO degradation processes follows the order: Fe³⁺/H₂O₂/UV, Fe³⁺/APS/UV, Fe²⁺/H₂O₂/UV, Fe²⁺/APS/UV.     

Light induced magnetic properties of spiropyrane tris(oxalato)chromate (III) single crystals

The effect of UV light on Weiss temperature and ESR spectra in 1-isopropyl-3, 3, 5′, 6′-tetramethylspiro[indolin-2,2′-[2H]pyrano[3,2-b]pyridinium] tris(oxalato)chromate (III) (Sp₃Cr(C₂O₄)₃) has been found. Additional line has been observed in the ESR spectra of irradiated samples in “strong” magnetic fields of ~15 kOe. The analysis of angular dependences of the ESR spectra allowed a contribution of Cr³⁺ ions to magnetic properties of Sp₃Cr(C₂O₄)₃ to be determined. The zero-field splitting parameters D=0.619 cm⁻¹, E=0.024 cm⁻¹ were derived from the experimental data. The parameters were typical for Cr³⁺ in the chromium oxalate. Weiss temperature changed sign from 25 to −25 K under UV irradiation. The value of Weiss temperature and its changing cannot be explained by exchange interaction, dipole-dipole interaction or the effect of crystal field. The existence of Weiss temperature is explained by the changes in amount and spin of paramagnetic particles. The change is due to thermoactivated redistribution of electrons between chromium ions and spiropyrane molecules. Light-induced transfer of electrons is also explaining the change in sign of Weiss temperature under UV irradiation.     

Simultaneous, sensitive and selective on-line chemiluminescence determination of Cr(III) and Cr(VI) by capillary electrophoresis

A novel in-capillary reduction and capillary electrophoretic (CE)-chemiluminescence (CL) method was developed for the sensitive and selective determination of chromium(III) and chromium(VI). The proposed method was based on the in-capillary reduction of Cr(VI) with acidic H₂O₂ to form Cr(III) using the zone-passing technique and chemiluminescence detection of Cr(III). The sample [Cr³⁺ and CrO₄²⁻], hydrochloric acid, and H₂O₂ (reductant) solution segments were injected for specified periods of time in this order from the anodic end of a capillary, followed by application of an appropriate running voltage between both ends. As both chromium species have opposite charges, Cr³⁺ migrates to the cathode while CrO₄²⁻ ion, moving oppositely to the anode, reacts with acidic H₂O_2, resulted in formation of Cr³⁺. Based on the migration time difference of both Cr³⁺ ions, they were separated by zone electrophoresis. Running buffer was composed of 0.02 mol l⁻¹ HAc-NaAc (pH 4.7) with 1×10⁻³ mol l⁻¹ EDTA. Parameters affecting CE-CL separation and detection, such as reductant concentration, mixing mode of the analytes with CL reagent, CL reaction reagent pH and concentration, stability of luminol-hydrogen peroxide mixed solution were optimized. The limits of detection for chromium(III) and chromium(VI) (3σ) were 6×10⁻¹³ mol l⁻¹ (mass concentration 12 zmol) and 8×10⁻¹² mol l⁻¹ (160 zmol), respectively. This method offered potential advantages of simplicity, sensitivity, selectivity and applicability to the determination of Cr(III) and Cr(VI) in environmental water.     

Synthesis and Kinetic Study on the Chromium(III) Complex [Cr(ASA)(en)2]Cl·2H2O

In order to explore the transfer mechanism of chromium(III) in mammals, a novel complex [Cr(ASA)(en)₂]Cl· 2H₂O, bis(ethylenediamine‐ κ ² N,N′)(4‐aminosalicylic acid‐ κ ² O,O′) chromium(III) monochloride dihydrate was synthesized (4‐aminosalicylic acid=H₂ASA, ethylenediamine=en). The crystal structure belongs to orthorhombic system with the space group P2₁2₁2₁ by means of X‐ray diffraction. The characteristic for transfer of Cr³⁺ from the compound to the low‐molecular‐mass chelator EDTA and the iron‐binding protein apoovotransferrin (apoOTf) was followed by UV‐visible (UV‐Vis) and fluorescence spectra in 0.01 mol·L^?1 Hepes at pH 7.4. The second order rate constants were calculated. Those spectra in conjunction were used to obtain more accurate information about the interaction of chromium complex with apoOTf. The experimental results indicate that Cr³⁺ can be transferred from the complex to apoOTf with the retention of the 4‐aminosalicylic acid acting as a synergistic anion.     

Synthesis and properties of polyvinylpyrrolidone films containing the photomagnetic chromium (tris)oxalate complex

Uniform composites of polyvinylpyrrolidone with the paramagnetic chromium (tris)oxalate complex (C₂₃H₂₃N₂O⁺)₃Cr(C₂O₄)₃·11.56 H₂O and cation of quinoline spiropyran of the indo-line series were obtained for the first time. Their photochemical properties and static and superhigh-frequency dynamic magnetic characteristics were studied. The change in the ESR spectra under UV irradiation in films of polyvinylpyrrolidone containing photochromic paramagnetic was observed.     

Elimination of 4‐chlorophenol in aqueous solution by the Novel Pd/MIL‐101(Cr)‐Hydrogen‐Accelerated catalytic fenton system

Excessive consumption of Fe (II) and massive generation of sludge containing Fe (III) from classic Fenton process remains a major obstacle for its poor recycling of Fe (III) to Fe (II). Therefore, the MHACF‐MIL‐101(Cr) system, by introducing H₂, Pd⁰ and MIL‐101(Cr) into Fenton reaction system, was developed at normal temperature and pressure. In this system, the reduction of Fe^III back to Fe^II by solid catalyst Pd/MIL‐101(Cr) for the storage and activation of H₂, was accelerated significantly by above 10‐fold and 5‐fold controlled with the H₂‐MIL‐101(Cr) system and H₂‐Pd⁰ system, respectively. However, the concentration of Fe (II) generated by the reduction of Fe (III) could not be detected with the only input of H₂ and without the addition of MOFs material. In addition, the apparent consumption of Fe (II) in MHACF‐MIL‐101(Cr) system was half of that in classical Fenton system, while more Fe (II) might be reused infinitely in fact. Accordingly, only trace amount of Fe (II) vs H₂O₂ concentration was needed and hydroxyl radicals through the detection of para‐hydroxybenzoic acid (p‐HBA) as the oxidative product of benzoic acid (BA) by·OH could be continuously generated for the effective degradation of 4‐chlorophenol(4‐CP). The effects of initial pH, concentration of 4‐CP, dosage of Fe²⁺, H₂O₂ and Pd/MIL‐101(Cr) catalyst, Pd content and H₂ flow were investigated, combined with systematic controlled experiments. Moreover, the robustness and morphology change of Pd/MIL‐101(Cr) were thoroughly analyzed. This study enables better understanding of the H₂‐mediated Fenton reaction enhanced by Pd/MIL‐101(Cr) and thus, will shed new light on how to accelerate Fe (III)/Fe (II) redox cycle and develop more efficient Fenton system.     

Kinetics of anation of chromium(III) by L-phenylalanine

Summary The kinetics of anation of chromium(III) species, [Cr(H₂O)₆]⁴⁺ and [Cr(H₂O)₅OH]²⁺, by L-phenylalanine in aqueous acid has been studied spectrophotometrically. Effects of varying [substrate], [ligand], [H⁺], , % ethanol and temperature were investigated. The kinetic data suggest a mechanism where outersphere-associations [between chromium(III) species and phenylalanine in the zwitterionic form] precede anation. Comparison of the results with published data suggest an I_a path for the [Cr(H₂O)₆]³⁺ reaction and I_d path for the [Cr(H₂O)₅OH]²⁺ reaction.     

Radiation-induced catalytic reduction of chromium(VI) in aqueous solution containing TiO2, Al2O3 or SiO2 fine particles

Reduction of chromium (VI), Cr(VI) in aqueous neutral or basic solution was promoted by γ-ray irradiation in the presence of oxide particles such as TiO₂, Al₂O₃ or SiO₂. The oxide particles behaved as a catalyst, and the efficiency of the Cr(VI) reduction increased with an increase of the irradiation dose irrespective of the initial Cr(VI) concentration. The insoluble Cr(III) oxide formed through the Cr(VI) reduction also acted as the catalyst.     

Solubilities of chromium(III) in molten potassium hydrogensulfate

The behavior of chromium(III) in molten potassium hydrogensulfate (220° C, P(H₂O) = 0.04 atm) is reported. Chromium(III) exists as Cr³⁺ in acidic medium, and as chromium(III) sulfate, which is insoluble in neutral medium but soluble in basic medium as Cr(SO₄)^?₂. The values of acidity constants and the solubilities of Cr(III) are reported.     

Speciation Analysis of Cr(III) and Cr(VI) after Solid Phase Extraction Using Modified Magnetite Nanoparticles

A new solid phase extraction (SPE) method has been developed for the speciation of Cr(III) and Cr(VI). This method is based on the adsorption of Cr(VI) on modified alumina‐coated magnetite nanoparticles (ACMNPs). Total chromium in different samples was determined as Cr(VI) after oxidation of Cr(III) to Cr(VI) using H₂O₂. The chromium concentration has been determined by flame atomic absorption spectrometric (FAAS) technique and amount of Cr(III) was calculated by substracting the concentration of Cr(VI) from total chromium concentration. The effect of parameters such as pH, amount of adsorbent, contact time, sample volume, eluent type, H₂O₂ concentration and cetyltrimethylammonium bromide (CTAB) concentration as modifier on the quantitative recovery of Cr(VI) were investigated. Under the optimal experimental conditions, the preconcentration factor, detection limit, linear range and relative standard deviation (RSD) of Cr(VI) were 140 (for 350 mL of sample solution), 0.083 ng mL^?1, 0.1‐10.0 ng mL^?1 and 4.6% (for 5.0 ng mL^?1, n = 7), respectively. This method avoided the time‐consuming column‐passing process of loading large volume samples in traditional SPE through the rapid isolation of CTAB@ACMNPs with an adscititious magnet. The proposed method was successfully applied to the determination and speciation of chromium in different water and wastewater samples and suitable recoveries were obtained.     

Factors controlling electron transfer reactions and stabilisation of uncommon oxidation states of chromium

Some experimental approaches to seek semi-quantitative understanding of factors controlling outer sphere electron transfer reactions of some transition metal complexes have been made. The relative importance of nuclear and electronic factors to outer sphere processes has been examined. By the manipulation of Franck-Condon or nuclear factors, it has now been possible to gain access into the chemistry of chromium in unusual oxidation states. An example of a reorganisation controlled electron transfer reaction involving Cr(IV)-Cr(III) system has been demonstrated. The bimolecular rate of reduction of diperoxoaquaethylenediamine chromium(IV) and diperoxodiethylenetriamine chromium(IV) is independent of the nature of th reductant employed viz. Fe²⁺ or VO²⁺ indicating that the generation of6 coordinate Cr(IV) species from7 coordinate of diperoxochromium(IV) reactant may be rate limiting. Similarly by increasing the barrier for the6 coordinate to4 coordinate structures through equatorial coordination of macrocyclic ligands, it has now been possible to detect through cyclic voltommogram the formation of relatively stable Cr(IV) species in the electrochemical oxidation of Cr(Me₄[14] tetraene)(H₂O) ₂ ³⁺ in aqueous sulphuric acid media. The kinetics and mechanism of the cerium(IV) and iodosyl benzene oxidation of Cr(salen)(H₂O) ₂ ⁺ and Cr(salprn)(H₂O) ₂ ⁺ have been investigated and kinetic and spectroscopic evidence for the formation of Cr(IV) transients and stable Cr(V) products has been presented. The relative importance of Franck-Condon factors in the oxidation of Cr(III) to Cr(IV) and Cr(V) states in different macrocyclic and multidentate ligand environments has been discussed.     

Separation and kinetic study of chromium(III) chloro complexes by capillary electrophoresis

Summary Three Cr(III) species (dichlorotetraaquachromium (III), [CrCl₂(H₂O)₄]⁺; monochloropentaaquachromium(III), [CrCl(H₂O)₅]²⁺; and hexaaquachromium(III), [Cr(H₂O)₆]³⁺) have been separated and determined by capillary electrophoresis. The first two complexes could be detected in direct mode in phosphate buffer, but because the absorption of complex [Cr(H₂O)₆]³⁺ is poor in the UV range, indirect UV detection had to be used. For indirect detection 5 mM imidazole was added to the buffer solution. The formation and decomposition of the different Cr(III) complexes were monitored in time after the preparation of solutions of CrCl₃.6H₂O. The slowest process was the decomposition of [CrCl(H₂O)₅]²⁺; 300 h after preparation of a solution of CrCl₃.6H₂O of pH 1 the solution contained only [Cr(H₂O)₆]³⁺. The effects of pH and the content of some matrix ions on the rates of conversion of the complexes were studied. The kinetic characteristics of this complex system could be investigated adequately by means of capillary electrophoresis. Presented at Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 1–3, 1999     

Kinetic studies on H+-catalyzed aquation and hydrogen peroxide oxidation of tris-asparaginatochromium(III)

Tris-asparaginatochromium(III), [Cr(Asn)₃]⁰ (where Asn forms a 5-membered chelate ring via amine nitrogen and α-carboxylate oxygen atoms) and its mono- and diaqua-derivatives were obtained, and their acid-catalyzed aquation was studied. The first reaction for [Cr(Asn)₃]⁰ and [Cr(Asn)₂(H₂O)₂]⁺ is the chelate ring opening at the Cr-NH₂ bond, leading to metastable intermediates. Kinetics of these processes were studied spectrophotometrically in 0.1–1.0 M HClO₄ at 303 and 333 K, respectively. A linear dependence of k _obs on [H⁺], k _obs = a + b[H⁺] was determined for both the complexes. Additionally, oxidation of chromium(III) to chromate(VI) by hydrogen peroxide was studied. The process proceeds through a chromium(V) intermediate, which is next transformed, in faster parallel steps into CrO₄ ^2? and [Cr(O₂)₂]^3? anions. The latter species, a chromium(V)-peroxo complex, is metastable under a large excess of H₂O₂. Kinetics of oxidation of [Cr(Asn)₃]⁰ were studied at 298 K, at constant [OH^?], within 0.2–1.0 M H₂O₂ range. A linear dependence of k _obs on H₂O₂ was established. A mechanism is proposed, where the rate-determining step is an inner sphere 2-electron transfer within a precursor chromium(III) complex with coordinated O₂H^? anion of the [Cr(Asn)₂(OH)(HO₂)]^? formula. EPR results provided clear evidence for formation of a relatively stable tetrakis(η ²-peroxo)chromate(V) complex, [Cr(O₂)₄]^3?.     

Column chromatographic speciation of chromium for Cr(VI) and several species of Cr(III)

Summary Chromium can be present in aqueous solution as Cr(VI) or in monomeric, dimeric, trimeric and higher polymeric forms of Cr(III). Many monomeric forms of Cr(III) are possible, with the water molecules of Cr(H₂O) ₆ ³⁺ substituted by anionic or neutral species. This proliferation of Cr(III) species makes the complete speciation of chromium a continuing challenge to the analyst. A simple and effective cation exchange procedure for the separation of various of these species uses a small glass column containing 1 mL of pre-treated cation exchange resin (Na⁺ form). Stepwise elution with solutions of perchloric acid, Ca²⁺ (pH=2) and La³⁺ (pH=2) separates Cr(VI) and seven Cr(III) species from CrX₃ to tetramer. Radiometric (Cr-51), spectrophotometric and other detection methods can be employed; the use of radiochromium gives the lowest detection limit.     

Study of the Photodegradation Kinetics and Pathways of Hexaflumuron in Liquid Media

Hexaflumuron, one of the benzoylphenylurea insect growth regulators, can be leached into surface water and thus having a potential impact on aquatic organisms. In this study, the photodegradation processes of hexaflumuron under high‐pressure mercury lamp irradiation were assessed. The photodegradation kinetics were studied, as were the effects of pH, different light sources, organic solvents and environmental substances, including nitrate ions (NO₃^?), nitrite ions (NO₂^?), ferrous ions (Fe²⁺), ferric ions (Fe³⁺), humic acid, sodium dodecyl sulfate (SDS) and hydrogen peroxide (H₂O₂). Three photodegradation products in methanol were identified by gas chromatography‐mass spectrometry (GC‐MS). In general, the degradation of hexaflumuron followed first‐order kinetics. In the four media studied, the photodegradation rate order was n‐hexane > methanol > ultrapure water > acetone. Faster degradation was observed under high‐pressure mercury lamp irradiation than under xenon lamp irradiation. The pH had a considerable effect, with the most rapid degradation occurring at pH 5.0. The photodegradation rate of hexaflumuron was promoted in the presence of NO₃^?, NO₂^?, Fe²⁺, humic acid, SDS and H₂O₂, but inhibited by Fe³⁺. Moreover, the presumed photodegradation pathway was proposed to be the cleavage of the urea linkage.     

Kinetics and mechanism of oxidation of the binary and ternary complexes of chromium(III) involving inosine and glycine by N -bromosuccinimide

The kinetics of oxidation of the chromium(III) complexes, [Cr(Ino)(H₂O)₅]³⁺ and [Cr(Ino)(Gly)(H₂O)₃]²⁺ (Ino?=?Inosine and Gly?=?Glycine) involving a ligands of biological significance by N-bromosuccinimide (NBS) in aqueous solution to chromium(VI) have been studied spectrophotometrically over the 25–45°C range. The reaction is first order with respect to both [NBS] and [Cr], and increases with pH over the 6.64–7.73 range in both cases. The experimental rate law is consistent with a mechanism in which the hydroxy complexes [Cr(Ino)(H₂O)₄(OH)]²⁺ and [Cr(Ino)(Gly)(H₂O)₂(OH)]⁺ are significantly more reactive than their conjugate acids. The value of the intramolecular electron transfer rate constant, k ₁, for the oxidation of the [Cr(Ino)(H₂O)₅]³⁺ (6.90?×?10^?4?s^?1) is lower than the value of k ₂ (9.66?×?10^?2?s^?1) for the oxidation of [Cr(Ino)(Gly)(H₂O)₂]²⁺ at 35°C and I?=?0.2?mol?dm^?3. The activation parameters have been calculated. Electron transfer apparently takes place via an inner-sphere mechanism.     

Esterification and isolation of the carboxylic acid with salicyl-bis-hydrazide via coordination of iron(III) 18-metallacrown-6 complex

The trianionic heptadentate ligand, (Z)-3-(5′-bromosalicylhydrazinocarbonyl) propenoic acid ((Z)-H₄bshcpa), has been synthesized in good yield and reacted with FeCl₃?·?6H₂O to produce [Fe^III ₆(C₁₂H₈N₂O₅Br)₆(H₂O)₂(CH₃OH)₄]?·?8H₂O?·?8CH₃OH. The complex has been characterized by single-crystal X-ray diffraction. In the self-assembly process the ligand was esterified and transferred into (Z)-methyl 3-(5′-bromosalicylhydrazinocarbonyl) propenoate ((Z)-H₃mbshcp). In the crystal structure, the neutral Fe(III) complex contains an 18-membered metallacrown ring consisting of six Fe(III) and six trianionic ligands. The 18-membered metallacrown ring is formed by six structural moieties of the type [Fe(III)–N–N]. Due to the meridional coordination of the ligands to Fe³⁺, the ligands enforce stereochemistry of the Fe³⁺ ions as a propeller configuration with alternating Λ/Δ forms. The metallacrown can be treated with SnCl₂ to obtain purified ester. In addition, we have also obtained reduced esterified ligand, methyl 3-(5′-bromosalicylhydrazinocarbonyl) propanoate (H₃mbshcp), with Zn powder as reductant.     

Comparison of chromium speciation by CZE and ion exchange followed by AAS

The hydrogen chromate anion (HCrO₄ ^–), which is the predominant species in acidic solutions and solutions with low chromium concentration, was determined by capillary zone electrophoresis (CZE) using UV detection on-column at 200 nm. A fused-silica capillary (55 cm × 50 μm i.d.) was employed with a high negative voltage of 20 kV. Total chromium was determined after reduction by H₂O₂ and its complexation by EDTA. The use of H₂O₂ as reducing agent is advantageous, as it does not increase the conductivity of the solution. Detection limits achieved (for 200 s injection time) were 30 and 8 μg/L for Cr(VI) and Cr(III), respectively. The CZE results obtained for Cr(III) and Cr(VI) were compared with those obtained by ion exchange with subsequent AAS.     

Solubility and Phase Behavior of Cr(III) Oxides in Alkaline Media at Elevated Temperatures

A platinum-lined, flowing autoclave facility is used to investigate the solubility behavior of Cr₂O₃ and FeCr₂O₄ in alkaline sodium phosphate, sodium hydroxide, and ammonium hydroxide solutions between 21 and 288°C. Baseline Cr(III) ion solubilities were found to be on the order of 0.1 nmolal, which were enhanced by the formation of anionic hydroxo and phosphato complexes. At temperatures below 51°C, the activity of Cr(III) ions in aqueous solution is controlled by a Cr(OH)₃·3H₂O solid phase rather than Cr₂O₃; above 51°C the saturating solid phase is -CrOOH. Measured chromium solubilities were interpreted via a Cr(III) ion hydrolysis/complexing model and thermodynamic functions for the hydrolysis/complexing reaction equilibria were obtained from least-squares analyses of the data. The existence of four new Cr(III) ion complexes is reported: Cr(OH)₃(H₂PO₄)^–, Cr(OH)₃(HPO₄)^2–, Cr(OH)₃(PO₄)^3–, and Cr(OH)₄(HPO₄)-(H₂PO₄)^4–. The last species is the dominant Cr(III) ion complex in concentrated, alkaline phosphate solutions at elevated temperatures.     

Axial Ligand and Spin‐State Influence on the Formation and Reactivity of Hydroperoxo–Iron(III) Porphyrin Complexes

The present study focuses on the formation and reactivity of hydroperoxo–iron(III) porphyrin complexes formed in the [Fe^III(tpfpp)X]/H₂O₂/HOO^? system (TPFPP=5,10,15,20‐tetrakis(pentafluorophenyl)‐21H,23H‐porphyrin; X=Cl^? or CF₃SO₃^?) in acetonitrile under basic conditions at ?15 °C. Depending on the selected reaction conditions and the active form of the catalyst, the formation of high‐spin [Fe^III(tpfpp)(OOH)] and low‐spin [Fe^III(tpfpp)(OH)(OOH)] could be observed with the application of a low‐temperature rapid‐scan UV/Vis spectroscopic technique. Axial ligation and the spin state of the iron(III) center control the mode of O? O bond cleavage in the corresponding hydroperoxo porphyrin species. A mechanistic changeover from homo‐ to heterolytic O? O bond cleavage is observed for high‐ [Fe^III(tpfpp)(OOH)] and low‐spin [Fe^III(tpfpp)(OH)(OOH)] complexes, respectively. In contrast to other iron(III) hydroperoxo complexes with electron‐rich porphyrin ligands, electron‐deficient [Fe^III(tpfpp)(OH)(OOH)] was stable under relatively mild conditions and could therefore be investigated directly in the oxygenation reactions of selected organic substrates. The very low reactivity of [Fe^III(tpfpp)(OH)(OOH)] towards organic substrates implied that the ferric hydroperoxo intermediate must be a very sluggish oxidant compared with the iron(IV)–oxo porphyrin π‐cation radical intermediate in the catalytic oxygenation reactions of cytochrome P450.