Synthesis of new calix[4]arenes containing nucleoside bases

A family of novel calix[4]arene derivatives containing nucleoside bases were designed and synthesized. Coupling reaction between para mono- or bis-amino calix[4]arenes 5, 6 or 7 and thymin-1-ylacetic acid in the presence of DCC afforded mono- or bis-thymine-substituted calix[4]arenes 8, 9 or 10 in over 70% yield. Owing to the low solubility of adenine-N⁹-ylacetic acid in DMF and DMSO and the weak nucleophilicity of aminocalix[4]arene derivatives, alternatively, the substitution reaction of bromoacetylated aminocalix[4]arenes derivatives 11, 12, 13 with adenine in the presence of sodium hydride was carried out to synthesize mono- or bis-adenine-substituted calix[4]arenes. Two kinds of isomers 15 and 16 or 17 and 18 were obtained due to the non-regiospecific alkylation of adenine, and their structures have been confirmed by ¹³C NMR and ¹H NMR spectra.     

Capping the upper and lower rims of calix[4]arenes by aryl dinitrile oxide reactions

1,3-Dipolar cycloadditions of upper- and lower-rim diallylcalix[4]arenes (1 and 3) with aryl dinitrile oxides provide a unique and efficient way of capping the calix[4]arenes. When dinitrile oxides reacted with 5-allylcalix[4]arene 7, they underwent a 1,3-dipolar cycloaddition on one side and an electrophilic substitution on the other side, which led to a novel type of asymmetric calix[4]arenes (9 and 12).     

Synthesis of novel calix[4]arenes containing organosilicon groups

Metalation of (RSiMe₂)₃CH (1a R = H, 1b R = Me, 1c R = Ph) with lithium diisopropylamide (LDA) or methyllithium in THF gave organolithium reagents (RSiMe₂)₃CLi, which reacted with the formylated calixarene (2), to give the corresponding 5,17-bis[2,2-bis(organosilyl)-1-ethenyl]-25,26,27,28-tetrapropoxycalix[4]arenes (3a, 3b and 3c) via the Peterson olefination. The compounds (RSiMe₂)₃CLi were treated with 25,26,27,28-tetrakis(4-bromobutoxy)calix[4]arene (4) to give 25,26,27,28-tetrakis[4-(tris(dimethylsilyl)methyl)butoxy] calix[4]arene (5a) and 25,26,27,28-tetrakis[4-(tris(trimethylsilyl)methyl)butoxy] calix[4]arene (5b) via nucleophilic substitution reactions. However the compound 25,26,27,28-tetrakis[4-(tris(dimethylphenylsilyl)methyl)butoxy] calix[4]arene (5c) was not obtained, presumably because (PhSiMe₂)₃C- is highly sterically hindered and the reactivity of its derivatives is low. The compound 5a has potential as a core for dendrimers.     

Diester intrabridging of p-tert-butylcalix[8]arene and unexpected formation of the monospirodienone derivative

Reaction of p-tert-butylcalix[8]arene 1 with adipoyl chloride in the presence of NaH as the base yielded singly and doubly intrabridged esters 2-4 and 6. Surprisingly, calix[8]arene monospirodienone derivative 7 was also isolated, which was originated by O₂ oxidation. The conditions of this oxidation were optimized leading to a novel synthetic approach to calixarene monospirodienones based on the O₂/NaH/acyl-chloride oxidizing system. Xantheno calix[8]arenes 8-8a were obtained by rearrangement of 7.     

Complex formation between water-soluble sulfonated calixarenes and C60 fullerene

The inclusion complexes of sulfonated thiacalix[4]arene 1 and calix[6]arene 2 sodium salts with C₆₀ fullerene were investigated by photoluminescence (PL) and quantum-chemical methods. The stoichiometries of calixarene/C₆₀ complexes were found to be 2:1 for 1 and 1:1 for 2. Related quantum-chemical investigations show that C₆₀ fullerene is included in a cavity composed of two half-bowl molecules of 1. The C₆₀ fullerene ball is located deep within the cavity of 2 and the negatively charged sulfonate arms probably inhibit the formation of the bowl-shaped capsule that was observed in the case of 1.     

Synthesis of di-substituted calix[4]arene-based receptors for extraction of chromate and arsenate anions

The article describes the synthesis of a family of novel calix[4]arene ionophores, 25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5a), 25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5b) and two chromogenic calix[4]arenes, 5,17-dinitro-25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5c), 5,17-dinitro-25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5d) bearing pyridinium units. In the synthesis, the upper and lower rims of p-tert-butylcalix[4]arene were modified in order to acquire binding sites for the recognition of arsenate and dichromate anions. It has been observed that protonated alkylammonium forms of the ionophores showed high affinity toward dichromate and arsenate anions.     

Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.     

Regioselective double intramolecular bridging of p-tert-butylcalix[7]arene

The first examples of doubly bridged calix[7]arenes 2a-h have been obtained by base-promoted O-alkylation of p-tert-butylcalix[7]arene 1 or 1,4-tetramethylene-bridged calix[7]arene 3a with a variety of bis-electrophiles including BrCH₂Cl, oligoethylene glycol ditosylates, and 1,2-bis(bromomethyl)benzene. In the presence of Cs₂CO₃ as the base, in acetone, the syn-1,4:2,3-bis-bridged regioisomer was obtained in yields up to 76%. Assignment of bridging pattern was based on chemical shift of OH groups in conjunction with chemical correlations with known compounds. Stereochemical and conformational features were investigated with the aid of 2D and Dynamic NMR studies and MM3 calculations.     

Formation of upper rim acylated calix[4]arenes using a sacrificial zinc anode

A straightforward electrosynthetic method is described, which allows upper rim acylation of non-p-halogenated calix[4]arenes. For example, a solution of tetrapropoxycalix[4]arene 4 was electrolysed in the presence of ZnBr₂ in an undivided cell fitted with a sacrificial zinc anode using pure acetonitrile as solvent, yielding an organozinc species, which was then treated with acetyl chloride in the presence of a palladium catalyst to afford 5,11-diacetyl-25,26,27,28-tetrapropoxycalix[4]arene 5 in ca. 35% yield after workup.     

Polymer-supported calix[4]arenes for sensing and conversion of NO2/N2O4

The use of simple calix[4]arenes 1a,b for NO₂/N₂O₄ sensing and conversion is demonstrated, both in solution and in the solid state. Upon reacting with these gases, compounds 1a,b encapsulate reactive NO⁺ cations within their cavities with the formation of deeply colored (λ_max∼570 nm) charge-transfer complexes 2a,b. Further functionalization of the calix[4]arene platform is reported for attachment to solid supports. Polymer-supported calixarene material 3 was prepared, which reversibly traps NO₂/N₂O₄ with the formation of nitrosonium storing polymer 4. Material 4 was effectively used for nitrosation of amides.     

Ullmann coupling reaction of 1,3-bistriflate esters of calix[4]arenes: facile syntheses of monoaminocalix[4]arenes and 4,4′:6,6′-diepithiobis(phenoxathiine)

Treatment of 1,3-bistriflate esters of thiacalix- (6a) and calix[4]arenes 6b with benzylamine in the presence of CuI and K₃PO₄ results in the displacement of a TfO moiety with a benzylamino group, which provides an easy access to monoaminothiacalix[4]arene 4a and its methylene-bridged counterpart 4b. On the other hand, the reaction of 6a in the absence of benzylamine leads to intramolecular dietherification, giving 4,4′:6,6′-diepithiobis(phenoxathiine) 7a.     

Functionalisation of the upper rim of calix[4]arene via alcoholysis and hydrosilylation reactions

Metalation of 5,17-dibromo-25,26,27,28-tetra propoxy calix[4]arene (1) with n-BuLi in THF at −78 °C gave organolithium reagent, which reacted with Me₂HSiCl to give 5,17-bis(dimethylsilyl)-25,26,27,28-tetra propoxy calix[4]arene (2). The Si-H groups of calixarene 2 were treated with methanol, ethanol, propanol, butanol, pentanol, hexanol, 2-propanol and 2-methyl propanol in the presence of Karstedt catalyst (platinum(0)-1,3-divinyl-1,1,3,3-tetramethyl disiloxane complex, solution in xylene) to give the corresponding 5,17-bis(alkoxydimethylsilyl)-25,26,27,28-tetra propoxy calix[4]arene (3). Moreover, calixarene 2 was easily functionalized with a variety of alkenes using Karstedt catalyst to give the corresponding organosilylated calix[4]arene (4).     

Multiple catenanes based on tetraloop derivatives of calix[4]arenes

Four novel tetraarylurea calix[4]arenes (4a-d) have been synthesized, substituted by ω-alkenyloxy residues in 3,5-positions of the arylurea residues. The eight alkenyl groups were pairwise connected by olefin metathesis and subsequent hydrogenation. The ring-closure reaction was carried out with heterodimers exclusively formed by 4 with a tetratosylurea calix[4]arene 1, which serves as a template in this reaction step. The potential trans-cavity bridging is entirely suppressed in this way. Bis- and tetraloop calix[4]arenes cannot form dimers due to overlapping loops. However, they readily form heterodimers with open-chain tetraureas, as long as their urea residues can pass through the loops. Thus, five heterodimeric capsules 8a-e with bis[3]catenane structure were synthesized using again the olefin metathesis followed by hydrogenation. Two different strategies were compared for this reaction sequence, starting with heterodimers formed either by tetraloop derivatives 5 with tetraalkenyl tetraureas 6 (pathway A) or by bisloop derivatives 7 with octaalkenyl tetraureas 4 (pathway B). A distinct advantage of one of these pathways was not observed; the bis[3]catenanes were obtained with yields of 20-60%. Heterodimers formed by tetraloop derivatives 5b-d and octaalkenyl ureas 4b-d were converted analogous to three novel cyclic [8]catenanes 9a-c in 30-42% yield. The structure of the novel catenanes was unambiguously proved by ¹H NMR and ESI MS, and for 8a and 9a additionally by single crystal X-ray analysis.     

An approach to the synthesis of chemically modified bisazocalix[4]arenes and their extraction properties

Bisazocalix[4]arenes [N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)benzene (1), N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)biphenyl (2) and N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)-2,2′-dinitro biphenyl (3)] have been synthesized from 25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene by diazocoupling with the corresponding aromatic diamines (p-phenylenediamine, 4,4′-diamino biphenyl and 4,4′-diamino-2,2′-dinitrobiphenyl). Extraction studies of bisazocalix[4]arenes 1, 2, and 3 show no difference in their extraction behavior and selectivity, whereas azocalix[4]arenes are a poor extractant for heavy metal cations. The absorption spectra of the prepared bisazocalix[4]arenes are discussed, both the effect of varying pH and solvent upon the absorption ability of bisazocalix[4]arenes.     

Calix[4]quinones. Part 4: The ClO2 oxidation of calix[4]arene dialkyl ethers

Except for the special case of calix[4]arene diethyl ether 1, the chlorine dioxide oxidation of dialkyl ethers 2-5 yielded only the corresponding calix[4]diquinone dialkyl ethers 8-11. Chlorine dioxide oxidation of calix[4]arene diethyl ether 1 produced two isomeric products 6 and 7, which were stable enough to be isolated by column chromatography. However, a slow conformational interconversion between isomeric pair 6 and 7 was observed at room temperature, and the equilibrium was reached after 400 h at 18 °C with an amount of 5:3 in favor of syn-isomer.     

CMPO-substituted calix[6]- and calix[8]arene extractants for the separation of An/Ln from radioactive waste

Three calix[6]arene derivatives (1a-c) and two calix[8]arene derivatives (2a,b), with six and eight CMPO residues, respectively, attached to the narrow/lower rim via ether links, were synthesised. Preliminary liquid-liquid extraction studies for Eu(III) and Am(III) from aqueous nitric acid to o-nitrophenylhexyl ether reveal remarkable properties with respect to efficiency and selectivity, especially for the tert-butylcalix[6]arene derivative with a -(CH₂)₃- spacer.     

Calix[8]arene-based glycoconjugates as multivalent carbohydrate-presenting systems

An efficient approach for the introduction of eight mono- or disaccharide sugar moieties (d-glucose, N-acetyl-d-glucosamine, d-galactose, l-fucose, d-maltose and d-cellobiose) at the upper rim of calix[8]arene 1, using thioureido linkers, is reported. The obtained water-soluble, nanosized glycocalix[8]arenes 5b-10b may act as biomimetic carbohydrate systems and as hosts for highly polar organic molecules. Preliminary ¹H NMR complexation experiments of octaglycosyl derivative 7b and 10b with ionic guests are also reported.     

Synthesis of the first examples of p-bromodienone and transannular spirodienone calixarene derivatives

The first examples of p-bromodienone calixarene derivatives (6-7 and 9-10) have been obtained by treatment of 1,5-dihydroxy-hexaalkoxycalix[8]arenes 5 or tripropoxycalix[4]arene 8 with trimethylphenylammonium tribromide and a saturated solution of NaHCO₃. The first transannular spirodienone derivative 11 was only obtained in the presence of NaOH or using the KOH/I₂/PEG-200 oxidizing system.     

Water-soluble pentasulfonatocalix[5]arene: selective recognition of ditopic trimethylammonium cations by a triple non-covalent interaction

The inclusion of tetramethylammonium and ditopic trimethylammonium cations by the water-soluble pentasulfonatocalix[5]arene 1 has been studied at neutral pH by ¹H NMR and compared with the homologous tetrasulfonatocalix[4]arene 2. Unlike host 2, host 1 selectively binds the ditopic trimethylammonium ions by three different non-covalent interactions. Remarkably the flexible host 1 exhibits both more efficiency and selectivity in the complexation of ditopic methylammonium ions with respect to similar more preorganised calix[4]arene receptors.