The reflection of a plane shock wave from a body with groove

When a plane shock wave impinges on bodies with grooves and when a supersonic stream of gas flows past such bodies a complicated flow pattern develops. In a number of cases oscillations of the bow wave [1–3] and an anomalous heating of the gas in the groove [4–6] have been observed. Unsteady reflection of shock waves from bodies with grooves and the processes occurring inside the grooves have been investigated comparatively little.Translated from Izvestiya Akademii Nauk SSSR, Hekhanika Zhidkosti 1 Gaza, No. 5, pp. 180–186, September–October, 1935.The authors wish to thank V. I. Ivanov for carrying out the calculations.     

Aspects of self-similar diffraction gas flows and their numerical simulation

A large number of papers has been devoted to the investigation of the interaction of a plane shock wave with bodies of various geometric shapes, and they have been generalized and classified for a stationary body in [1, 2]. Separate results of experimental and theoretical investigations of the interaction of a shock wave with a wedge, cone, sphere, and cylinder moving with supersonic velocities are contained in [3–9]. Analysis of the available results shows that the features of the unsteady gas flows formed in this case largely depend on the nature of the boundary-value problem that arises for the system of differential gas dynamic equations. The question of the wave structure of the unsteady gas flow and the accuracy of the obtained solution is central to the numerical investigation of the present class of problems. The most characteristic types of unsteady self-similar gas flows that arise on the interaction of a plane shock wave with bodies of a wedge or convex corner type are calculated on the basis of an explicit numerical continuous calculation method of the second order of accuracy. The accuracy of the numerical solutions is discussed on the basis of a comparison with the experimental data. The case of the interaction of a shock wave with the rarefaction wave that arises in a supersonic flow past a convex corner is considered.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 146–152, July–August, 1986.     

Supersonic motion of bodies in a gas with shock waves

The authors consider the problem of supersonic unsteady flow of an inviscid stream containing shock waves round blunt shaped bodies. Various approaches are possible for solving this problem. The parameters in the shock layer on the axis of symmetry have been determined in [1, 2] by using one-dimensional theory. The authors of [3, 4] studied shock wave diffraction on a moving end plane and wedge, respectively, by the through calculation method. This method for studying flow around a wedge with attached shock was also used in [5]. But that study, unlike [4], used self-similar variables, and so was able to obtain a clearer picture of the interaction. The present study gives results of research into the diffraction of a plane shock wave on a body in supersonic motion with the separation of a bow shock. The solution to the problem was based on the grid characteristic method [6], which has been used successfully to solve steady and unsteady problems [7–10]. However a modification of the method was developed in order to improve the calculation of flows with internal discontinuities; this consisted of adopting the velocity of sound and entropy in place of enthalpy and pressure as the unknown thermodynamic parameters. Numerical calculations have shown how effective this procedure is in solving the present problem. The results are given for flow round bodies with spherical and flat (end plane) ends for various different values of the velocities of the bodies and the shock waves intersected by them. The collision and overtaking interactions are considered, and there is a comparison with the experimental data.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 141–147, September–October, 1984.     

Numerical investigations on shock oscillations ahead of a hemispherical shell in supersonic flow

A clear understanding of the mechanism responsible for large amplitude shock pulsations ahead of a hemispherical cavity in supersonic flow is presented for the first time in this article. This has applications in supersonic parachute decelerators during the atmospheric descent stage of aerospace vehicles. A cell-centered finite volume code FaSTAR is used to solve the full Navier–Stokes equations on a hemispherical shell facing a Mach 4.0 supersonic free stream. The numerical method is validated against earlier experimental results. First, Flow Configuration A appears consisting of an axisymmetric shock that undergoes low-amplitude oscillations. This flow transitions to Flow Configuration B that has an asymmetric shock structure and undergoes large-amplitude non-stationary shock pulsations. The shock stand-off distance in Flow Configuration B is 1.65 times that in Flow Configuration A. The generation of vortices from the curved shock, amplification of vortices of one kind due to the dynamics of the cavity flow, and further interaction of these amplified vortices with the shock in a loop causes the large-amplitude shock pulsations. The oscillation frequencies as determined from cavity pressure and shock stand-off distance signals extracted from the unsteady results are 1.26 kHz during Flow Configuration A, and 859 and 863 Hz during the non-stationary pulsations of Flow Configuration B. The Helmholtz resonator model predicts quite accurately the frequency of Flow Configuration A (1.27 kHz), and to a good extent the frequency in Flow Configuration B (916.7 Hz).     

Pressure pulsations on an obstacle in a jet

At the present time, much attention is devoted to auto-oscillations that arise from the interaction between a supersonic underexpanded jet and an obstacle that it encounters at right angles [1, 2]. There are far fewer data on the pressure pulsations on an obstacle in the absence of auto-oscillations [3–6]. However, in many cases the highest total levels of the pressure pulsations are observed when the barrier is situated at fairly large distances from the nozzle opening and the pressure pulsations have a random nature. We have investigated the pressure pulsations on a plate normal to a supersonic strongly underexpanded jet. The pulsation characteristics were measured for an arrangement of the obstacle when auto-oscillations are absent. We have established dependences that generalize the results of measurement of the pulsation characteristics at both subsonic and supersonic velocities on the jet axis directly in front of the obstacle. We have also investigated the correlation between the pressure pulsations on the plate and external acoustic noise. We have obtained the dependence of the level of the acoustic noise on the value of the maximal pressure pulsations on the plate.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 163–167, January–February, 1980.     

Interaction between an external compression shock and a blunt body in a hypersonic stream

A complex shock configuration with two triple points can occur during the interaction between an external oblique compression shock and the detached shock ahead of a blunt body (for instance, ahead of a wing or stabilizer edge). This results in the formation of a high-pressure, low-entropy supersonic gas jet [1–6]. Here two flow modes are possible [1], which differ substantially in the intensity of the thermal and dynamic effects of the stream on the blunt body: mode I corresponds to the impact of a supersonic jet [2–6], while the supersonic jet in mode II does not reach the body surface in the domain of shock interaction because of curvature under the effect of a pressure drop. Conditions for the realization of the above-mentioned flow modes are investigated experimentally and theoretically, and an approximate method is proposed to determine the magnitude of the compression shock standoff in the interaction domain. Blunt bodies with plane and cylindrical leading edges are examined. The results of a computation agree satisfactorily with experimental data.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 97–103, January–February, 1976.The author is grateful to V. V. Lunev for discussing the research and for useful remarks.     

Numerical simulation of shock wave intersections

A large number of papers, generalized and classified in [1, 2], have been devoted to unsteady gas flows arising in shock wave interaction. Experimental results [3–5] and theoretical analysis [6–9] indicate that the most interesting and least studied types of interaction arise in cases when there are several shock waves. At the same time, nonlinear effects, which depend largely on the nature of the shock wave intersections, become appreciable. Regions of existence of different types, of plane shock wave intersections have been analyzed in [10–13]. It has been shown that in a number of cases the simultaneous existence of different types of intersections is possible. The aim of the present paper is to study unsteady shock wave intersections in the framework of a numerical solution of the axisymmetric boundary-value problem that arises in the diffraction of a plane shock wave on a cone in a supersonic gas flow. Flow regimes that augment the experimental data of [3–5] and the theoretical analysis of [9] are considered.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 134–140, September–October, 1986.     

Supersonic flow past weak sources of radiation

In the cited works [1, 2], a study was made of supersonic flow round a source of x-ray radiation by stellar wind. It was found that if the energy release is sufficiently high, a bow shock wave forms in the flow, and a zone of low density and high temperature of the gas arises behind the source. If the influx of energy to the gas is small, the flow remains supersonic everywhere [2]. The question of the formation of a shock wave in the case of weak heating through of the gas by the radiation was not considered in [2]. However, on the basis of the qualitative analogy between supersonic flow past impermeable bodies and radiation sources, one would naturally expect that if the power of the energy release is low a shock wave which does not intersect the axis of symmetry could appear. The following article indicates the conditions under which this actually occurs, and a quantitative analogy is established between supersonic flow past thin bodies and sources of radiation, and the range of flow where such an analogy is absent is also determined.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 133–136, July–August, 1984.The author thanks V. P. Stulov and M. M. Gilinskii for discussing this work and for their extremely useful comments.     

Pulsating regime corresponding to an obstacle in a stationary inhomogeneous flow

The pulsating regime produced by the presence of a cylindrical cavity in a stationary inhomogeneous supersonic flow is simulated mathematically. The system of equations for an inviscid thermally nonconducting gas is solved by a numerical method based on a two-step difference scheme of second order of approximation. This method makes it possible to calculate in each time step the complete flow field at once, which makes it possible to follow the development of the nonstationary flow, which in the present case is a pulsating flow. The flow pattern in the pulsating regime is studied in detail. The pressure pulsations in the cavity are due to the alternating passage through it of shock waves and rarefaction waves, and the pulsations are nonlinear. The influence of the basic parameters on the characteristics of the pulsating flow is studied and some estimates are made.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 64–71, September–October, 1979.     

Viscous shock layer near the stagnation point on a rotating body with unsteady injection and surface cooling

Unsteady supersonic flow regimes in the neighborhood of a stagnation point are investigated on the basis of a system of viscous shock layer equations [10] containing all the terms of the Euler equations and the boundary layer equations. An analytic solution of the unsteady equations valid near the surface of the body is found in the case of strong injection. The unsteady equations of the viscous shock layer are solved numerically on the basis of a divergent implicit scheme of the second order of approximation across the shock layer, using Newtonian linearization and vector sweep methods with allowance for the boundary relations on the surface of the body and at the isolated bow shock. Certain calculation results illustrating the effect of injection, surface cooling, the swirl of the external flow and the angular velocity of the body on the structure of the steady and unsteady viscous shock layer are presented.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 114–122, September–October, 1987.     

Experimental investigation of nonstationary flow in cavities in a supersonic flow

An experimental investigation was made into the flow and pressure pulsations in cylindrical cavities open toward a supersonic flow and set up at zero angle of attack (i.e., the cavity axis and the direction of the flow coincide).Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 180–183, September–October, 1979.     

Lattice of plates in an unsteady supersonic flow

The supersonic unsteady flow of a gas past a lattice of thin, slightly curved profiles has been investigated in several studies. The paper [1] is devoted to an evaluation of the effect of wind tunnel walls on the unsteady aerodynamic characteristics of a profile, and [2] investigates the effects of the boundaries of a free jet. These cases are equivalent respectively to the anti-phase and in-phase oscillations of the profiles of an unstaggered grid. In [3] consideration is given to a more general case of gas flow past a profile in a wind tunnel with perforated walls. Flow past a lattice of profiles with stagger is studied in [4], where the magnitude of the stagger angle is limited by the condition that the lattice leading edge is located in the undisturbed stream.In the present paper we present a method of calculation of the unsteady supersonic flow of a gas past a lattice of profiles with arbitrary stagger. As an example the results are presented of the calculation of the aerodynamic forces and moments acting on an oscillating profile in a wind tunnel with solid walls and in a free jet.     

Calculation of hydrogen-air combustion behind detached shock wave for supersonic flow past a sphere

Many of the published theoretical studies of quasi-one-dimensional flows with combustion have been devoted to combustion in a nozzle, wake, or streamtube behind a normal shock wave [1–6].Recently, considerable interest has developed in the study of two-dimensional problems, specifically, the effective combustion of fuel in a supersonic air stream.In connection with experimental studies of the motion of bodies in combustible gas mixtures using ballistic facilities [7–9], the requirement has arisen for computer calculations of two-dimensional supersonic gas flow past bodies in the presence of combustion.In preceding studies [10–12] the present author has solved the steady-state problem under very simple assumptions concerning the structure of the combustion zone in a detonation wave.In the present paper we obtain a numerical solution of the problem of supersonic hydrogen-air flow past a sphere with account for the nonequilibrium nature of eight chemical reactions. The computations encompass only the subsonic and transonic flow regions.The author thanks G. G. Chernyi for valuable comments during discussion of the article.     

Calculation of interaction of a turbulent near-wake behind a step with a supersonic jet

Existing computational methods [1–5] do not enable one to calculate complex flows behind steps, accounting for nonuniformity of the incident supersonic flow and the effect of compression and expansion waves arriving in the near-wake region. For example, computational methods based on the methods of [1] or [2] are used mainly in uniform supersonic flow ahead of the base edge and, for the most part, cannot be used to calculate flow in annular nozzles with irregular conditions. An exception is reference [6], which investigated flow in an annular nozzle behind a cylindrical center-body. The present paper suggests a method, based on references [7, 8] for calculating the base pressure behind two-dimensional and three-dimensional steps, washed by a supersonic jet.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 6, pp. 43–51, November– December 1977.     

Three-dimensional nonequilibrium reacting airflow around a body penetrating into an equilibrium heated zone

The problem of the supersonic penetration of a spherically blunt body at an angle of attack into a medium containing a temperature and chemical inhomogeneity is considered. In order to determine the flow parameters the unsteady Euler equations of gas dynamics, supplemented by the continuity equations for the chemical components that compose the dissociated air, are solved numerically. The variation with time of the shape of the bow shock, the flow characteristics and the component concentrations is determined.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 130–137, November–December, 1990.The author wishes to thank V. B. Baranov for discussing his results.     

Flow around a sphere by a two-phase supersonic jet

Results are presented of a calculation of the flow around a sphere of a two-phase supersonic jet, discharging into a vacuum. Calculations were performed by the determination method with use of a difference grid constructed on the basis of characteristic ratios [1], The parameters of the unperturbed jet were determined with the two-velocity and two-temperature model of mutually penetrating flows of continuous media (gas and particles) [2, 3] by the network method [4]. In calculating the flow around the sphere, as in [5–7], it was assumed that the particles do not affect the gas flow in the shock layer. An analysis of the effect of particles on gasdynamic parameters in a shock layer was performed in [8].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 171–176, November–December, 1978.The authors are grateful to A. N. Nikulin for providing the program for calculation of flow about a blunt body by a uniform supersonic flow.     

Parameters of flow near the axis in the shock layer in the interaction of a supersonic jet with a barrier

The axisymmetric interaction between a supersonic jet with a finite expansion ratio and a barrier is accompanied by the formation of complex sub- and supersonic flow in a shock layer whose thickness depends on the parameters of the jet and the position of the barrier. The main relationships of the interaction process have been established experimentally ([1–3] and others) and individual results of numerical calculations of such flows are known [4]. An analytical investigation of the parameters in the shock layer formed ahead of a plane barrier when an underexpanded jet impinges on it is presented below. The results of [5], where the region near the axis of a shock layer of arbitrary thickness is analyzed within the framework of a model of flow with a constant density, is placed at the basis of the analysis.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 63–70, September–October, 1978.The author thanks Yu. M. Tsirkunov for useful discussions.     

Ultrasonic jet in an external acoustic field

The interaction of supersonic jets with external acoustic waves is investigated in connection with the emission of sound of discrete frequency by the jets. A plausible physical scheme explaining the appearance and maintenance of the oscillations of supersonic jets with discrete frequency was proposed in [1]. A model problem of the effect of pressure perturbations of a given frequency, traveling along the surface of a two-dimensional jet is also investigated there. The results of the solution of this problem (in particular, the presence of critical frequencies at which the perturbations in the jet grow indefinitely in the direction of motion of the flow) substantiate the hypothesis that by virtue of its periodic (cellular) structure a supersonic jet has the properties of a resonator. In [1] the more general problem of interaction of a supersonic jet with an external acoustic field is also formulated, which is in complete correspondence with the physical scheme of the phenomena developed in that article. In the present work this problem is solved in its complete form for plane and cylindrical jets for symmetric and antisymmetric perturbations in an external acoustic field, and also in the presence of subsonic accompanying flow in the outer medium.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 105–113, March–April 1974.     

Characteristics of unsteady type IV shock/shock interaction

Characteristics of the unsteady type IV shock/shock interaction of hypersonic blunt body flows are investigated by solving the Navier–Stokes equations with high-order numerical methods. The intrinsic relations of flow structures to shear, compression, and heating processes are studied and the physical mechanisms of the unsteady flow evolution are revealed. It is found that the instantaneous surface-heating peak is caused by the fluid in the “hot spot” generated by an oscillating and deforming jet bow shock (JBS) just ahead of the body surface. The features of local shock/boundary layer interaction and vortex/boundary layer interaction are clarified. Based on the analysis of flow evolution, it is identified that the upstream-propagating compression waves are associated with the interaction of the JBS and the shear layers formed by a supersonic impinging jet, and then the interaction of the freestream bow shocks and the compression waves results in entropy and vortical waves propagating to the body surface. Further, the feedback mechanism of the inherent unsteadiness of the flow field is revealed to be related to the impinging jet. A feedback model is proposed to reliably predict the dominant frequency of flow evolution. The results obtained in this study provide physical insight into the understanding of the mechanisms relevant to this complex flow.