A theoretical and experimental study of two thiazole orange derivatives with single- and double-stranded oligonucleotides, polydeoxyribonucleotides and DNA

The effect of interaction with DNA and oligonucleotides on the photophysical properties of two thiazole orange (TO) derivatives, with different side chains (-(CH2)3-N+(CH3)3 and -(CH2)6-I)) linked to the nitrogen of the quinoline ring of the thiazole orange, is presented here. The first one called TO-PRO1 is a commercially available dye, whereas the second one called TO-MET has been specially synthesized for further covalent binding to oligonucleotides with the aim of being used for specific in situ detection of biomolecular interactions. Both photophysical measurements and molecular calculations have been done to assess their possible mode of interaction with DNA. When dissolved in buffered aqueous solutions both derivatives exhibit very low fluorescence quantum yields of 8 x 10(-5) and 2 x 10(-4), respectively. However, upon binding to double-stranded DNA, large spectroscopic changes result and the quantum yield of fluorescence is enhanced by four orders of magnitude, reaching values up to phi F = 0.2 and 0.3, respectively, as a result of an intercalation mechanism between DNA base pairs. A modulation of the quantum yield is observed as a function of the base sequence. The two derivatives also bind with single-stranded oligonucleotides, but the fluorescence quantum yield is not so great as that when bound to double-stranded samples. Typical fluorescence quantum yields of 7 x 10(-3) to 3 x 10(-2) are observed when the dyes interact with short oligonucleotides, whereas the fluorescence quantum yield remains below 10(-2) when interacting with single-stranded oligonucleotides. This slight but significant quantum-yield increase is interpreted as a folding of the single strand around the dye, which reduces the internal rotation of the two heterocycles around the central methine bridge that links the two moieties of the dye. From these properties, it is proposed to link monomer covalently to oligonucleotides for the subsequent detection of target sequences within cells.     

Exploring base-pair-specific optical properties of the DNA stain thiazole orange

Double-stranded DNA offers multiple binding sites to DNA stains. Measurements of noncovalently bound dye-nucleic acid complexes are, necessarily, measurements of an ensemble of chromophores. Thus, it is difficult to assign fluorescence properties to base-pair-specific binding modes of cyanine dyes or, vice versa, to obtain information about the local environment of cyanines in nucleic acids by using optical spectroscopy. The feasibility to stain DNA and simultaneously probe local perturbations by optical spectroscopy would be a valuable asset to nucleic acid research. So-called FIT probes (forced intercalation probes) were used to pinpoint the location of the DNA stain thiazole orange (TO) in PNADNA duplexes. A detailed analysis of the base-pair dependence of optical properties is provided and enforced binding of TO is compared with "classical" binding of free TO-PRO1. UV-visible absorbance, circular dichroism (CD) and fluorescence spectroscopy, and melting-curve analyses confirmed site-specific TO intercalation. Thiazole orange exhibited base-specific responses that are not observed in noncovalent dye-nucleic acid complexes, such as an extraordinary dependence of the TO extinction coefficient (+/-60 % variation of the averaged epsilon(max) of 57,000 M(-1) cm(-1)) on nearest-neighbor base pairs. TO signals hybridization, as shown by increases in the steady-state fluorescence emission. Studies of TO fluorescence lifetimes in FIT-PNA and in DNADNA and PNADNA complexes highlighted four different fluorescence-decay processes that may be closed or opened in response to matched or single-mismatched hybridization. A very fast decay process (0.04-0.07 ns) and a slow decay process (2.33-3.95 ns) provide reliable monitors of hybridization, and the opening of a fast decay channel (0.22-0.48 ns) that resulted in an attenuation of the fluorescence emission is observed upon the formation of mismatched base pairs.     

Fluorescence properties and photophysics of the sulfoindocyanine Cy3 linked covalently to DNA

The sulfoindocyanine Cy3 is one of the most commonly used fluorescent dyes in the investigation of the structure and dynamics of nucleic acids by means of fluorescence methods. In this work, we report the fluorescence and photophysical properties of Cy3 attached covalently to single-stranded and duplex DNA. Steady-state and time-resolved fluorescence techniques were used to determine fluorescence quantum yields, emission lifetimes, and fluorescence anisotropy decays. The existence of a transient photoisomer was investigated by means of transient absorption techniques. The fluorescence quantum yield of Cy3 is highest when attached to the 5' terminus of single-stranded DNA (Cy3-5' ssDNA), and decreases by a factor of 2.4 when the complementary strand is annealed to form duplex DNA (Cy3-5' dsDNA). Substantial differences were also observed between the 5'-modified strands and strands modified through an internal amino-modified deoxy uridine. The fluorescence decay of Cy3 became multiexponential upon conjugation to DNA. The longest lifetime was observed for Cy3-5' ssDNA, where about 50% of the decay is dominated by a 2.0-ns lifetime. This value is more than 10 times larger than the fluorescence lifetime of the free dye in solution. These observations are interpreted in terms of a model where the molecule undergoes a trans-cis isomerization reaction from the first excited state. We observed that the activation energy for photoisomerization depends strongly on the microenvironment in which the dye is located. The unusually high activation energy measured for Cy3-5' ssDNA is an indication of dye-ssDNA interactions. In fact, the time-resolved fluorescence anisotropy decay of this sample is dominated by a 2.5-ns rotational correlation time, which evidences the lack of rotational freedom of the dye around the linker that separates it from the terminal 5' phosphate. The remarkable variations in the photophysical properties of Cy3-DNA constructs demonstrate that caution should be used when Cy3 is used in studies employing DNA conjugates.     

Fluorescence resonance energy transfer (FRET) for DNA biosensors: FRET pairs and Förster distances for various dye-DNA conjugates

Fluorescence resonance energy transfer (FRET) between the extrinsic dye labels Cyanine 3 (Cy3), Cyanine 5 (Cy5), Carboxytetramethyl Rhodamine (TAMRA), Iowa Black Fluorescence Quencher (IabFQ), and Iowa Black RQ (IabRQ) has been studied. The F?rster distances for these FRET-pairs in single- and double-stranded DNA conjugates have been determined. In particular, it should be noted that the quantum yield of the donors Cy3 and TAMRA varies between single- and double-stranded DNA. While this alters the F?rster distance for a donor-acceptor pair, this also allows for detection of thermal denaturation events with a single non-intercalating fluorophore. The utility of FRET in the development of nucleic acid biosensor technology is illustrated by using TAMRA and IabRQ as a FRET pair in selectivity experiments. The differential quenching of TAMRA fluorescence by IabRQ in solution has been used to discriminate between 0 and 3 base pair mismatches at 60 degrees C for a 19 base sequence. At room temperature, the quenching of TAMRA fluorescence was not an effective indicator of the degree of base pair mismatch. There appears to be a threshold of duplex stability at room temperature which occurs beyond two base pair mismatches and reverses the observed trend in TAMRA fluorescence prior to that degree of mismatch. When this experimental system is transferred to a glass surface through covalent coupling and organosilane chemistry, the observed trend in TAMRA fluorescence at room temperature is similar to that obtained in bulk solution, but without a threshold of duplex stability. In addition to quenching of fluorescence by FRET, it is believed that several other quenching mechanisms are occurring at the surface.     

A new method for the detection of ATP using a quantum-dot-tagged aptamer

Fluorescence resonance energy transfer (FRET) between a quantum dot as donor and an organic fluorophore as acceptor has been widely used for detection of nucleic acids and proteins. In this paper, we developed a new method, characterized by 605-nm quantum dot (605QD) fluorescence intensity increase and corresponding Cy5 fluorescence intensity decrease, to detect adenosine triphosphate (ATP). The new method involved the use of three different oligonucleotides: 3′-biotin-modified DNA that binds to streptavidin-conjugated 605QD; 3′-Cy5-labelled DNA; and a capture DNA consisting of an ATP aptamer and a sequence which could hybridize with both 3′-biotin-modified DNA and 3′-Cy5-labelled DNA. In the absence of the target ATP, the capture DNA binds to 3′-biotin-modified DNA and 3′-Cy5-labelled DNA, bringing quantum dot and Cy5 into close proximity for greater FRET efficiency. When ATP is introduced, the release of the 3′-Cy5-labelled DNA from the hybridization complex took place, triggering 605QD fluorescence intensity increase and corresponding Cy5 fluorescence intensity decrease. Taken together, the virtue of FRET pair 605QD/Cy5 and the property of aptamer-specific conformation change caused by aptamer–ATP interaction, combined with the fluorescence intensity change of both 605QD and Cy5, provide prerequisites for simple and convenient ATP detection. Zhang Chen and Guang Li contributed equally to this work.     

Tethered thiazole orange intercalating dye for development of fibre-optic nucleic acid biosensors

Single-stranded DNA (ssDNA) oligonucleotide in solution, or that is immobilized onto a surface to create a biosensor, can be used as a selective probe to bind to a complementary single-stranded sequence. Fluorescence enhancement of thiazole orange (TO) occurs when the dye intercalates into double-stranded DNA (dsDNA). TO dye has been covalently attached to probe oligonucleotides (homopolymer and mixed base 10mer and 20mer) through the 5′ terminal phosphate group using polyethylene glycol linker. The tethered TO dye was able to intercalate when dsDNA formed in solution, and also at fused silica surfaces using immobilized ssDNA. The results indicated the potential for development of a self-contained biosensor where the fluorescent label was available as part of the immobilized oligonucleotide probe chemistry. The approach was shown to be able to operate in a reversible manner for multiple cycles of detection of targeted DNA sequences.     

Dual fluorophore PNA FIT-probes - extremely responsive and bright hybridization probes for the sensitive detection of DNA and RNA

Fluorescently labeled oligonucleotides are commonly employed as probes to detect specific DNA or RNA sequences in homogeneous solution. Useful probes should experience strong increases in fluorescent emission upon hybridization with the target. We developed dual labeled peptide nucleic acid probes, which signal the presence of complementary DNA or RNA by up to 450-fold enhancements of fluorescence intensity. This enabled the very sensitive detection of a DNA target (40 pM LOD), which was detectable at less than 0.1% of the beacon concentration. In contrast to existing DNA-based molecular beacons, this PNA-based method does not require a stem sequence to enforce dye-dye communication. Rather, the method relies on the energy transfer between a "smart" thiazole orange (TO) nucleotide, which requires formation of the probe-target complex in order to become fluorescent, and terminally appended acceptor dyes. To improve upon fluorescence responsiveness the energy pathways were dissected. Hydrophobic, spectrally mismatched dye combinations allowed significant (99.97%) decreases of background emission in the absence of a target. By contrast, spectral overlap between TO donor emission and acceptor excitation enabled extremely bright FRET signals. This and the large apparent Stokes shift (82 nm) suggests potential applications in the detection of specific RNA targets in biogenic matrices without the need of sample pre-processing prior to detection.     

Twin probes as a novel tool for the detection of single-nucleotide polymorphisms

Single-nucleotide polymorphisms (SNPs) are the most common form of DNA sequence variation. There is a strong interest from both academy and industry to develop rapid, sensitive and cost effective methods for SNP detection. Here we report a novel structural concept for DNA detection based on fluorescence dequenching upon hybridization. The so-called "twin probe" consists of a central fluorene derivative as fluorophore to which two identical oligonucleotides are covalently attached. This probe architecture is applied in homogeneous hybridization assays with subsequent fluorescence spectroscopic analysis. The bioorganic hybrid structure is well suited for sequence specific DNA detection and even SNPs are identified with high efficiency. Additionally, the photophysical properties of the twin probe were investigated. The covalent attachment of two single stranded oligonucleotides leads to strong quenching of the central fluorescence dye induced by the nucleobases. The twin probe is characterized by supramolecular aggregate formation accompanied by red-shifted emission and broad fluorescence spectra.     

Distance-dependent emission from dye-labeled oligonucleotides on striped Au/Ag nanowires: effect of secondary structure and hybridization efficiency

When fluorescently tagged oligonucleotides are located near metal surfaces, their emission intensity is impacted by both electromagnetic effects (i.e., quenching and/or enhancement of emission) and the structure of the nucleic acids (e.g., random coil, hairpin, or duplex). We present experiments exploring the effect of label position and secondary structure in oligonucleotide probes as a function of hybridization buffer, which impacts the percentage of double-stranded probes on the surface after exposure to complementary DNA. Nanowires containing identifiable patterns of Au and Ag segments were used as the metal substrates in this work, which enabled us to directly compare different dye positions in a single multiplexed experiment and differences in emission for probes attached to the two metals. The observed metal-dye separation dependence for unstructured surface-bound oligonucleotides is highly sensitive to hybridization efficiency, due to substantial changes in DNA extension from the surface upon hybridization. In contrast, fluorophore labeled oligonucleotides designed to form hairpin secondary structures analogous to solution-phase molecular beacon probes are relatively insensitive to hybridization efficiency, since the folded form is quenched and therefore does not appreciably impact the observed distance-dependence of the response. Differences in fluorescence patterning on Au and Ag were noted as a function of not only chromophore identity but also metal-dye separation. For example, emission intensity for TAMRA-labeled oligonucleotides changed from brighter on Ag for 24-base probes to brighter on Au for 48-base probes. We also observed fluorescence enhancement at the ends of nanowires and at surface defects where heightened electromagnetic fields affect the fluorescence.     

Ratiometric fluorescence transduction by hybridization after isothermal amplification for determination of zeptomole quantities of oligonucleotide biomarkers with a paper-based platform and camera-based detection

Paper is a promising platform for the development of decentralized diagnostic assays owing to the low cost and ease of use of paper-based analytical devices (PADs). It can be challenging to detect on PADs very low concentrations of nucleic acid biomarkers of lengths as used in clinical assays. Herein we report the use of thermophilic helicase-dependent amplification (tHDA) in combination with a paper-based platform for fluorescence detection of probe-target hybridization. Paper substrates were patterned using wax printing. The cellulosic fibers were chemically derivatized with imidazole groups for the assembly of the transduction interface that consisted of immobilized quantum dot (QD)–probe oligonucleotide conjugates. Green-emitting QDs (gQDs) served as donors with Cy3 as the acceptor dye in a fluorescence resonance energy transfer (FRET)-based transduction method. After probe-target hybridization, a further hybridization event with a reporter sequence brought the Cy3 acceptor dye in close proximity to the surface of immobilized gQDs, triggering a FRET sensitized emission that served as an analytical signal. Ratiometric detection was evaluated using both an epifluorescence microscope and a low-cost iPad camera as detectors. Addition of the tHDA method for target amplification to produce sequences of ∼100 base length allowed for the detection of zmol quantities of nucleic acid targets using the two detection platforms. The ratiometric QD-FRET transduction method not only offered improved assay precision, but also lowered the limit of detection of the assay when compared with the non-ratiometric QD-FRET transduction method. The selectivity of the hybridization assays was demonstrated by the detection of single nucleotide polymorphism.     

吲哚类菁染料Cy3嵌入的核壳荧光纳米颗粒的制备及其性质研究

以蛋白质或多肽修饰的吲哚类菁染料Cy3为内核, 采用实验条件简单的油包水反相微乳液方法成核, 通过正硅酸乙酯水解形成的网状二氧化硅包壳的方法制备吲哚类菁染料Cy3嵌入的核壳荧光纳米颗粒. 考察了以不同等电点的蛋白质和多肽修饰的Cy3为内核材料对吲哚类菁染料Cy3嵌入的核壳荧光纳米颗粒制备的影响. 结果表明, 分别采用人免疫球蛋白(IgG)或多聚赖氨酸修饰的Cy3为内核材料, 都能制备荧光强度高、荧光稳定性强和染料泄漏极少的Cy3嵌入的核壳荧光纳米颗粒. 进一步对Cy3嵌入的核壳荧光纳米颗粒进行了表征, 并将基于这一新型的荧光纳米颗粒建立起来的生物标记方法初步应用于流感病毒DNA的检测, 其检测线性范围为3.18×10-10～1.27×10-9 mol/L, 检测下限为3.51×10-10 mol/L, 相关系数r为0.986 5.     

Towards multi-colour strategies for the detection of oligonucleotide hybridization using quantum dots as energy donors in fluorescence resonance energy transfer (FRET)

The potential for a simultaneous two-colour diagnostic scheme for nucleic acids operating on the basis of fluorescence resonance energy transfer (FRET) has been demonstrated. Upon ultraviolet excitation, two-colours of CdSe/ZnS quantum dots with conjugated oligonucleotide probes act as energy donors yielding FRET-sensitized acceptor emission upon hybridization with fluorophore (Cy3 and Alexa647) labeled target oligonucleotides. Energy transfer efficiencies, Förster distances, changes in quantum yield and lifetime, and signal-to-noise with respect to non-specific adsorption have been investigated. The dynamic range and limit-of-detection are tunable with the concentration of QD-DNA conjugate. The Cy3 and Alexa647 acceptor schemes can detect target from 4 to 100% or 10 to 100% of the QD-DNA conjugate concentration, respectively. Nanomolar limits of detection have been demonstrated in this paper, however, results indicate that picomolar detection limits can be achieved with standard instrumentation. The use of an intercalating dye (ethidium bromide) as an acceptor to alleviate non-specific adsorption is also described and increases signal-to-noise from S/N < 2 to S/N = 9-10. The ethidium bromide system had a dynamic range from 8 to 100% of the QD-DNA conjugate concentration and could detect target in a matrix containing an excess of non-complementary nucleic acid.     

Fluorescent signal amplification of carbocyanine dyes using engineered viral nanoparticles

We report enhancement in the fluorescent signal of the carbocyanine dye Cy5 by using an engineered virus as a scaffold to attach >40 Cy5 reporter molecules at fixed locations on the viral capsid. Although cyanine dye loading is often accompanied by fluorescence quenching, our results demonstrate that organized spatial distribution of Cy5 reporter molecules on the capsid obviates this commonly encountered problem. In addition, we observe energy transfer from the virus to adducted dye molecules, resulting in a highly fluorescent viral nanoparticle. We have used this enhanced fluorescence for the detection of DNA-DNA hybridization. When compared with the most often used detection methods in a microarray-based genotyping assay for Vibrio cholerae O139, these viral nanoparticles markedly increased assay sensitivity, thus demonstrating their applicability for existing DNA microarray protocols.     

Towards a fluorescent molecular switch for nucleic acid biosensing

A novel fluorescent molecular switch for the detection of nucleic acid hybridization has been explored in relation to the development of a structure that would be amenable for operation when immobilized for solid-phase analyses. The structure was prepared by self-assembly, and used Neutravidin as the central multivalent docking molecule, a newly synthesized biotinylated long-chain linker for intercalating dye that was modified with thiazole orange (TO) at one end, and a biotinylated probe oligonucleotide. Self-assembly of the biotinylated components on adjacent Neutravidin binding sites allowed for physical placement of an oligonucleotide probe molecule next to tethered TO. The TO located at the end of the flexible linker chain was available to intercalate, and could report if a duplex structure was formed by a probe–target interaction by means of fluorescence intensity. Subsequently, regeneration of the single-stranded probe was possible without loss of the intercalator to solution. The switch constructs were assembled in solution and subsequently immobilized onto biotin functionalized optical fibers to complete the sensor design. Solution-phase fluorescence lifetime data showed a biexponential behavior for switch constructs, suggesting intercalation as well as a significant secondary binding mode for the immobilized TO. It was found that the secondary binding mechanism for the dye to DNA could be decreased, thus shifting the dye to intercalative binding modes, by adjusting the solution conditions to a pH below the pI of Neutravidin, and by increasing the ionic strength of the buffer. Preliminary work demonstrated that it was possible to achieve up to a fivefold increase in fluorescence intensity on hybridization to the target.     

On-chip multiplexed solid-phase nucleic acid hybridization assay using spatial profiles of immobilized quantum dots and fluorescence resonance energy transfer

A microfluidic based solid-phase assay for the multiplexed detection of nucleic acid hybridization using quantum dot (QD) mediated fluorescence resonance energy transfer (FRET) is described herein. The glass surface of hybrid glass-polydimethylsiloxane (PDMS) microfluidic channels was chemically modified to assemble the biorecognition interface. Multiplexing was demonstrated using a detection system that was comprised of two colors of immobilized semi-conductor QDs and two different oligonucleotide probe sequences. Green-emitting and red-emitting QDs were paired with Cy3 and Alexa Fluor 647 (A647) labeled oligonucleotides, respectively. The QDs served as energy donors for the transduction of dye labeled oligonucleotide targets. The in-channel assembly of the biorecognition interface and the subsequent introduction of oligonucleotide targets was accomplished within minutes using a combination of electroosmotic flow and electrophoretic force. The concurrent quantification of femtomole quantities of two target sequences was possible by measuring the spatial coverage of FRET sensitized emission along the length of the channel. In previous reports, multiplexed QD-FRET hybridization assays that employed a ratiometric method for quantification had challenges associated with lower analytical sensitivity arising from both donor and acceptor dilution that resulted in reduced energy transfer pathways as compared to single-color hybridization assays. Herein, a spatial method for quantification that is based on in-channel QD-FRET profiles provided higher analytical sensitivity in the multiplexed assay format as compared to single-color hybridization assays. The selectivity of the multiplexed hybridization assays was demonstrated by discrimination between a fully-complementary sequence and a 3 base pair sequence at a contrast ratio of 8 to 1.     

Thiazole Orange Dimers in DNA: Fluorescent Base Substitutions with Hybridization Readout

By using (S)‐2‐amino‐1,3‐propanediol as a linker, thiazole orange (TO) was incorporated in a dimeric form into DNA. The green fluorescence (λ=530 nm) of the intrastrand TO dimer is quenched, whereas the interstrand TO dimer shows a characteristic redshifted orange emission (λ=585 nm). Steady‐state optical spectroscopic methods reveal that the TO dimer fluorescence is independent of the sequential base contexts. Time‐resolved pump–probe measurements and excitation spectra reveal the coexistence of conformations, including mainly stacked TO dimers and partially unstacked ones, which yield exciton and excimer contributions to the fluorescence, respectively. The helicity of the DNA framework distorts the excitonic coupling. In particular, the interstrand TO dimer could be regarded as an excitonically interacting base pair with fluorescence readout for DNA hybridization. Finally, the use of this fluorescent readout was representatively demonstrated in molecular beacons.     

Dependence of Fluorescence Quenching of CY3 Oligonucleotide Conjugates on the Oxidation Potential of the Stacking Base Pair

To understand the complex fluorescence properties of astraphloxin (CY3)-labelled oligonucleotides, it is necessary to take into account the redox properties of the nucleobases. In oligonucleotide hybrids, we observed a dependence of the fluorescence intensity on the oxidation potential of the neighbouring base pair. For the series I < A < G < 8-oxoG, the extent of fluorescence quenching follows the trend of decreasing oxidation potentials. In a series of 7 nt hybrids, stacking interactions of CY3 with perfect match and mismatch base pairs were found to stabilise the hybrid by 7–8 kJ/mol. The fluorescence measurements can be explained by complex formation resulting in fluorescence quenching that prevails over the steric effect of a reduced excited state trans-cis isomerisation, which was expected to increase the fluorescence efficiency of the dye when stacking to a base pair. This can be explained by the fact that, in a double strand, base pairing and stacking cause a dramatic change in the oxidation potential of the nucleobases. In single-molecule fluorescence measurements, the oxidation of G to 8-oxoG was observed as a result of photoinduced electron transfer and subsequent chemical reactions. Our results demonstrate that covalently linked CY3 is a potent oxidant towards dsDNA. Sulfonated derivatives should be used instead.     

Brightness through Local Constraint—LNA‐Enhanced FIT Hybridization Probes for In Vivo Ribonucleotide Particle Tracking

Imaging the dynamics of RNA in living cells is usually performed by means of transgenic approaches that require modification of RNA targets and cells. Fluorogenic hybridization probes would also allow the analysis of wild‐type organisms. We developed nuclease‐resistant DNA forced intercalation (FIT) probes that combine the high enhancement of fluorescence upon hybridization with the high brightness required to allow tracking of individual ribonucleotide particles (RNPs). In our design, a single thiazole orange (TO) intercalator dye is linked as a nucleobase surrogate and an adjacent locked nucleic acid (LNA) unit serves to introduce a local constraint. This closes fluorescence decay channels and thereby increases the brightness of the probe–target duplexes. As few as two probes were sufficient to enable the tracking of oskar mRNPs in wild‐type living Drosophila melanogaster oocytes.     

DNA hybridization enhancement using piezoelectric microagitation through a liquid coupling medium

In conventional DNA microarray hybridization, delivery of target cDNAs to surface-bounded probes depends solely on diffusion, which is notoriously slow, and thus typically requires 6-20 h to complete. In this study, piezoelectric microagitation through a liquid coupling medium is employed to enhance DNA hybridization efficiency and the results are compared with the standard static hybridization method. DNA hybridization was performed in a sealed aluminium chamber containing DNA microarray glass chip, coupling medium and piezoelectric transducers. 3×SSC (Saline Sodium Citrate) was used as a coupling medium to prevent overheating of the piezoelectric transducers and to effectively transmit ultrasonic wave to the glass chip. Flow visualization using fluidic dye and velocimetry (PTV) technique was applied to observe fluid transport in the hybridization chamber. It was revealed that the dye solution was homogeneously distributed within 10 min under dynamic agitation while it took over 1 h to reach the same level of homogeneity in static condition. Plasmodium falciparum DNA microarrays and total RNA extracted from parasite cells were used as a model for DNA microarray experiments. It was found that the required hybridization time may be substantially reduced from 16 h to 4 h by the use of dynamic hybridization scheme. With the same hybridization time of 16 h, dynamic hybridization resulted in higher fluorescent signals of ～33% and ～24% compared to static hybridization in Cy3 and Cy5 channels, respectively. Additionally, good/effective spots, some of which were not formed by static method, were enhanced and distributed more uniformly over the microarray. Therefore, the developed dynamic hybridization with integrated piezoelectric microagitation platform is highly promising for DNA analysis in molecular biology and medical applications.     

Enzymatic manipulations of DNA oligonucleotides on microgel: towards development of DNA-microgel bioassays

We demonstrate that DNA oligonucleotides covalently coupled to colloidal microgel can be manipulated by T4 DNA ligase for DNA ligation and by Phi29 DNA polymerase for rolling circle amplification (RCA). We also show that the long single-stranded RCA product can generate intensive fluorescence upon hybridization with complementary fluorescent DNA probe. We believe DNA-microgel conjugates can be explored for the development of DNA based bioassays and biosensors.