Band structure of even and ions of odd polyenes

The analysis of experimental data for singlet transitions (E _n) of even polyenes (I), cations (II) and anions (III) of odd polyenes show that for infinite chains E (I)/E (II)=E (I)/E (III) = 2:1. It is shown that the energy gap is equal for the three systems. In cases (II) and (III) there is a level (NBMO) in the gap which is vacant in (II) and occupied in (III). That is why the first optical transition in (II) and (III) depends on the semiwidth of the gap.     

Preparation of fluorine compounds of groups 13 and 14: a study case for the diagonal relationship of aluminum and germanium

The synthesis of carbaalanes of composition [(AlF)₆(AlNMe₃)₂(CR)₆] containing terminal fluorine atoms is described. The clusters have in common that the central core consists of eight aluminum and six carbon atoms. Six of the eight aluminum atoms are bearing six terminal fluorine atoms. The fluorination of (t-BuNCH₂AlH)₄ results in the formation of the aggregate (t-BuNCH₂AlF)₄. In group 14, the fluorine containing unsaturated compounds LGeF, LGeS(F), LGeSe(F), and LGeNSiMe₃(F) were prepared (LHC(CMeNAr)₂), Ar = 2,6-iPr₂C₆H₃ and Ar = 2,6-Me₂(C₆H₃)).     

An EELS and EXELFS study of amorphous hydrogenated silicon carbide

A series of thin films of amorphous hydrogenated silicon carbide (a-SiCH) produced by RF plasma decomposition of propane and silane has been studied by electron energy-loss spectroscopy (EELS) and extended energy-loss fine structure (EXELFS) studies. The composition of the films has been determined by EELS and the nearest neighbour spacings have been determined by EXELFS. These results, along with the energy of the plasmon loss peaks, have been compared with the deposition conditions for each film. The results show that for a large gas ratio (C₃H₈/(C₃H₈+SiH₄)) the films have a high proportion of carbon and are similar to a-CH in structure, whereas those films prepared with Y = 0.4 or 0.5 have nearest neighbour spacings consistent with those for tetrahedrally bonded carbon. The films prepared with lowest Y have nearest neighbour spacings similar to those for amorphous silicon carbide. The results for a-SiCH have been compared with the results of EELS and EXELFS of CVD diamond films, amorphous carbon and amorphous silicon.     

Synthesis, structural characterisation and thermal decomposition studies of some 2,4′-bipyridyl complexes with cobalt(II), nickel(II) and copper(II)

2,4-Bipyridyl (2,4-bipy orL) complexes with cobalt(II), nickel(II) and copper(II) of the formulae M(2,4-bipy)₂(CH₃COO)₂·2H₂O (M(II) = Co, Ni, Cu), Co(2,4-bipy)₂SO₄·3H₂O or Ni(2,4-bipy)₂SO₄·4H₂O have been prepared and their IR and electronic (VIS) spectra are discussed. The thermal behaviour of the obtained compounds has also been studied. The intermediate products of decomposition at different temperatures have been characterized by chemical analysis and X-ray diffraction.We thank dr. A. Malinowska for performing VIS spectra. This work was supported by the KBN project No. PB 0636/P3/93/04.     

Chiral separation of β-amino alcohols by capillary electrophoresis using cyclodextrins as buffer additives. I. Effect of varying operating parameters

Summary Capillary electrophoresis has been used for the chiral analysis of two -amino alcohol pharmaceutical compounds. Capillary zone electrophoresis conditions were used with -cyclodextrin as a chiral mobile phase additive. The effects of variation of -cyclodextrin concentration, temperature, pH, background electrolyte composition and concentration have been investigated. Optimum separations were achieved for clenbuterol using -cyclodextrin at its solubility limit (16mM), the lowest practicable temperature (19°C), pH 4.0 and an electrolyte solution with a high ionic strength prepared from 0.1 M citric acid and 0.3 M Na₂HPO₄. For the development compound picumeterol and its (S)-enationmer, the optimum pH 4.0 buffer was prepared from 0.1 M citric acid and 0.2 M sodium acetate. Baseline separation with resolution greater than 2 was achieved for both compounds.This work was presented in part at the 2nd International Symposium on Chiral Discrimination, Rome, May 27–31, 1991.     

Studies of the energy spectrum of α, ω- substituted polymethine chains. II. Polymethine chains with odd number of methine groups

The analysis of the experimental data for the energy of the longest wavelength optical transitions _n,opt of substituted polymethines X (CH)_2n+1 X shows that in the asymptotic case (n) _,opt does not tend to zero, as it follows from the empirically established correlations, but has a finite, non-zero value. It is shown that the energy gap of odd polymethines is the same as that of the even polymethines - the polyenes (E 2 eV). The substituents (X N, O, B) are responsible for the appearance of levels in the gap. These, depending on the substituent character, are vacant (X B) or occupied (X N, O). The transition from or to such a level determines the longest wavelength optical transition energy of polymethines.     

Crystal and Molecular Structure of Cu(II) Bis-(2-methoxy-2,6-dimethyl-3-imino-5-heptanonate)

A new compound from the series of alkoxyketoiminates, Cu(II) bis-(2-methoxy-2,6-dimethyl-3-imino-5-heptanonate), has been synthesized and studied by X-ray crystallography. Crystal data for CuO₄N₂C₂₀H₃₆: a=10.154(1), b=9.921(1), c=11.684(2) , =96.17(1)°, space group P2₁/c, Z=2, dcalc =1.226 g/cm³, R=0.037. The structure is molecular and built from isolated trans-complexes. The copper atom has a plane square environment of two oxygen atoms (Cu–O 1.93 ) and two nitrogen atoms (Cu–N 1.90 ). The O–Cu–N chelate angle is 91.7°. The complex has an intramolecular hydrogen bond, N–H...O 2.16 , involving the alkoxy oxygen atom. The molecular packing in the crystal is close to that of copper(II) dipivaloylmethanate. The calculated van der Waals intermolecular interaction energies and thermogravimetric characteristics of the complexes are compared.     

Crystal Structure of Two Dimethyl 1,3-Thiazolidinedicarboxylates Obtained in Thermal [2 + 3]Cycloaddition of an Azomethine Ylide with 2,2,4,4-Tetramethyl-3-Thioxocyclobutanone

The crystal structures of dimethyl 2,2,4,4-tetramethyl-3-oxocyclobutane-1-spiro-5-3,4-diphenyl-(1,3)-thiazolidine-2,2-dicarboxylate, C₂₆H₂₉NO₅S for V, and dimethyl 3,4-diphenyl-5-isopropylidene-(1,3)-thiazolidine-2,2-dicarboxylate, C₂₂H₂₃NO₄S for VI, have been solved. The 1,3-thiazolidine ring of compound V has got twisted conformation, while in compound VI this ring adopts envelope. In both structures short inter- and intramolecular contacts were found, which can be recognized as hydrogen bonds.     

Homolytic addition of polyhaloalkanes to α-vinyloxy-ω-trialkylstannoxy-alkanes as a new route to 2-perhaloalkylmethyl-substituted 1,3-dioxacyclanes

Photoinduced reactions of -vinyloxy--trialkylstannoxyalkanes, CH₂=CHO(CH₂) _n OSnEt₃ (n = 2 to 4), with polyhaloalkanes result in 2-perhaloalkylmethyl-substituted 1,3-dioxacyclanes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1824–1826, September, 1995.     

Ruthenium carbene complexes containing bidentate and tridentate PO ligands

Treatment of [Ru(CHR)Cl₂(PCy₃)₂] (Cy = cyclohexyl) with Tl[N(Pr₂ⁱPO)₂] and AgL_OEt (L_OEt⁻ = [CpCo{P(O)(OEt)₂}₃]⁻) afforded the Ru carbene complexes [Ru(CHPh)(PCy₃)Cl{N(Pr₂ⁱPO)₂}] (1) and [L_OEtRu(CHR)(PCy₃)Cl] (2), respectively. Chloride abstraction of complex 2 with TlPF₆ in MeCN afforded [L_OEtRu(CHPh)(PCy₃)(MeCN)][PF₆] (3). Complexes 1 and 2 are capable of catalyzing ring-closing metathesis of diethyl 1,2-diallylmalonate. The crystal structure of complex 2 has been determined.     

2,2′-Diphenyl-Δ3,3′-bi-3H-indole-1,1′-dioxide: Molecular interactions and crystal structure

The Dinitrone 2,2-diphenyl-^3,3-bi-3H-indole-1,1-dioxide acts as a demethylating and dehydrogenating agent. The mechanism of interaction of the dinitrone with donors and acceptors does not involve intermediate charge-transfer complexes probably due to a self association between dinitrone molecules (as supported by X-ray determinations). The crystal structure of the dinitrone was obtained by direct methods;a=9.967 (2),b=19.817 (3),c=10.875 (2) Å, =111.2 (2)°, space group P2₁/n. The finalR andR _w were 0.089 and 0.063 for all measured reflexes.

---

2,2-Diphenyl-^3,3-bi-3H-indol-1,1-dioxid: Molekulare Wechselwirkungen und Kristallstruktur

Zusammenfassung Das Dinitron 2,2-Diphenyl-^3,3-bi-3H-indol-1,1-dioxid wirkt als Demethylierungs- und Oxydationsmittel. Die Wechselwirkung des Dinitrons mit Elektronen-Acceptoren und Elektronen-Donatoren geht wegen der Selbstassoziation zwischen den Dinitron-Molekülen ohne die dazwischenliegende Bildung eines Charge-Transfer-Komplexes vor sich; das wird auch von Röntgenstrukturuntersuchungen gestützt. Die Kristallstruktur wurde mit direkten Methoden ermittelt:a=9.967 (2),b=19.817 (3),c=10.875 (2) Å; =111.2 (2)°. P2₁/n. Die endgültigen WerteR undR _w waren 0.089 und 0.063 für alle gemessenen Reflexe.

     

Synthesis,crystal structure and conformation of N-acetyl-Cα,α-diethylglycine-N′-methylamide

Summary Synthesis and X-ray structure analysis of N-acetyl-^,-diethylglycine-N-methylamide [CH₃-Co-NH-C(C₂H₅)₂-CO-NHCH₃] are described. The compound was obtained from the corresponding N-acetyl derivative [CH₃-CO-NH-C(C₂H₅)₂-COOH] through the mixed anhydride procedure. It crystallizes as monohydrate (C₉H₁₈N₂O₂·H₂O) in space group P2₁/c,a=7.139(1),b=11.823(2),c=15.778(3) Å, =122.23(1)°,V=1126.53 ų,D _m=1.20 Mgm^–3 (room temperature),R=0.046 for 1523 reflections. The crystal packing is dominated by two strong hydrogen bonds between the water molecule and two carbonyl oxygen atoms and two weak H-bonds to two amide-N-atoms of symmetry-equivalent molecules. The molecular conformation is closer to a 3₁₀-helix then ana-helix.

---

Synthese, Kristallstruktur und Konformation von N-Acetyl-^,-diethylglycin-N-methylamid

Zusammenfassung Es wird über Synthese und die röntgenographische Strukturbestimmung von N-Acetyl-^,-diethylglycin-N-methyl-amid [CH₃-CO-NH-C(C₂H₅)₂-CO-NH-CH₃] berichtet. Die Verbindung wurde unter Anwendung der Methode der gemischten Anhydride aus dem entsprechenden N-Acetylderivat [CH₃-CO-NH-C(C₂H₅)₂-COOH] erhalten. Sie kristallisiert als Monohydrat (C₉H₁₈N₂O₂·H₂O) in der Raumgruppe P2₁/c mita=7.139(1),b=11.823(2),c=15.778(3) Å, =122.23(1)°,V=1126.53 ų,D _m=1.20 Mgm^–3,D _x=1.204 Mgm^–3 (Raumtemperatur).R=0.046 für 1523 Reflexe. Die Kristallpackung ist dominiert durch zwei starke H-Brücken vom Wassermolekül zu zwei Carbonylsauerstoffatomen sowie zwei schwachen H-Brücken zu zwei Amid-N-atomen symmetrieequivalenter Moleküle. Die Konformation des Peptidgerüstes ist näher einer 3₁₀ als einera-Helix.

     

Structural Dynamics of Isomorphic Substitution in N,N′-Diallylbenzimidazolium Copper Halide π-Complexes [C7H5N2(C3H5)2]+[Cu2Cl3?xBrx]? (x=0, 1.60, 2.33, 3)

Two new -complexes of copper(I) halides with the 1,3-diallylbenzimidazolium cation, [C₇H₅N₂(C₃H₅)₂]⁺[Cu₂Cl_1.40Br_1.60]^– and [C₇H₅N₂(C₃H₅)₂]⁺[Cu₂Br₃]^–, have been synthesized and structurally defined (space group P2 ₁/c for both; a = 22.094(6), b = 9.272(8), c = 9.22(1) , = 118.26(4)° and a = 22.267(5), b = 9.311(3), c = 9.263(2) , = 117.51(2)°). The mutual effects of chlorine–bromine substitution and the efficiency of -interactions are discussed based on XRD data for these two compounds and for the compounds [C₇H₅N₂(C₃H₅)₂]⁺[Cu₂Cl₃]^– and [C₇H₅N₂(C₃H₅)₂]⁺[Cu₂Cl_0.67Br_2.33]^– studied previously.     

Solubility Study of Nimodipine Inclusion Complexation with α- and β-Cyclodextrin and some Substituted Cyclodextrins

The solubility of nimodipine was measured in aqueous solutions of the following cyclodextrins: -cyclodextrin (-CD), hydroxypropyl--CD (HP--CD), -cyclodextrin (-CD), random substituted methyl--CD (M--CD), three hydroxypropyl--CDs (HP--CD) with mutually different average degree of substitution, and hydroxypropyl--cyclodextrin (HP--CD). From the determined linear solubility diagrams the values of the binding constant K₁₁ of the inclusion complexes of nimodipine with the respective CDs were evaluated. The -CDs efficiently solubilized sparingly soluble nimodipine, the highest value of K₁₁ was found for M--CD (1680 M^-1), followed by -CD (550 M^-1) and HP--CDs, where the higher degree of substitution lowered K₁₁. Only slight solubilization of nimodipine was observed in the solutions of the -CDs and HP--CD.     

In Situ Crystallization of Bacterial Cellulose III. Influences of Different Polymeric Additives on the Formation of Microfibrils as Revealed by Transmission Electron Microscopy

Effects of polymer additives on the formation of microfibrils of bacterial cellulose have been examined by transmission electron microscopy. Among additives with different degrees of polymerization (DP) or substitution (DS), carboxymethyl cellulose sodium salt (CMC) with DP = 80 and DS = 0.57 is the most effective in producing separate, smaller-size microfibrils. By increasing the concentration of this CMC from 0.1 to 1.5%, the percentage of microfibrils measuring 3–7 nm wide is increased and levels off at around 1.0%. Other polymer additives such as xyloglucan are less effective than CMC in producing microfibrils with smaller sizes and the resulting microfibrils still tend to aggregate. The number of charged substituents and the molecular weight seem to be important factors in the production of highly separate smaller-size microfibrils. The reduction in average microfibril size is well correlated to the decrease in mass fraction of cellulose I in bacterial cellulose crystals. On the basis of these results, the mechanism of the crystallization of celluloses I and I is discussed. The effect of colony types, smooth and rough, on the formation of microfibrils in the presence of CMC is also described.     

Intercalation of α,ω-Alkanediamines in Layered Aluminium Dihydrogen Triphosphate Dihydrate

Intercalation of ,-alkanediamines, NH₂(CH₂) _n NH₂ (n = 3–10), into layered aluminium dihydrogen triphosphate dihydrate, AlH₂(P₃(O₁₀... 2H₂O, was investigated by XRD, DTA-TG, elemental analysis, and solid-state ³¹P, ¹³C and ²⁷Al NMR. ,-Alkanediamines are intercalated to form a monomolecular layer in the interlayer region, in which the alkanediamines incline at 57 ± 5° to the phosphate layers, whereas n-alkylamines form a bilayer structure with the same inclination angle. Two amino groups in an ,-alkanediamine molecule bridge the layered sheets of phosphates.     

Inclusion of Ring A of Cholesterol Inside the β-Cyclodextrin Cavity: Evidence from Oxidation Reactions and Structural Studies

The disposition of cholesterol inside the -cyclodextrin cavity(-CD) was deduced from oxidation of cholesterol secondary alcoholgroups by Ca(OCl)₂ and H₂O₂ in thepyridine–acetic acid system. The amount of cholest-4-ene-3-one formedwas found to be proportional to the concentration of -cyclodextrin,resulting in 56.1% of ketone. The oxidation rate was enhanced by-cyclodextrin and its methyl, polymer and 1 : 1copper(II)–-cyclodextrin derivatives. Detailed investigationsinvolving UV-visible, ¹³C- and ¹H-NMR(T₁, 1D NOE and ROESY) spectroscopic studies were carried out.A binding constant value of 15,385 ± 1500 M^-2 wasobtained for the 2 : 1heptakis-2,6-di-O-methyl--cyclodextrin(DM-CD) : cholesterolcomplex in chloroform from UV studies. Proton and solid state¹³C-CP MAS spectra of the -CD–cholesterol mixtureshowed large magnitude shifts for the protons from the wider end of the-CD cavity as well as those of ring A and ring B of cholesterol. Both1D NOE and ROESY measurements indicated the proximity between ring A andring B protons of cholesterol and the wider end protons of -CD andDM-CD. Besides, analysis of _c,_i and tau;_m from T₁measurements showed not only a lowering of rotational motions but a value of 0.016–0.048 for some of the cholesterol protons, typical of aweak complex. Based on these studies, a probable structure for the 2 : 1complex involving two molecules of -CD/DM-CD was proposed withportions of ring A and ring B being present inside the wider end of the-CD/DM-CD cavity and ring D and the side chain attached atposition 17, projecting into the wider end of the secondCD/DM-CD molecule.     

Synthesis of Platinum-Triruthenium Clusters Using the Zero-Valent Platinum Reagent Pt(nb)3: X-Ray Crystal Structures of Ru3Pt(CO)11(P-iPr3)2, Ru3Pt(μ-H)(μ3-η3-MeCCHCMe)(CO)9(P-iPr3), Ru3Pt(μ3-η2-PhCCPh)(CO)10(P-iPr3), Ru3Pt(μ-H)(μ4-N)(CO)10(P-iPr3) and Ru3Pt(μ-H)(μ4-η2-NO)(CO)10(P-iPr3)

The complexes Pt(nb)_3-n(P-iPr₃)_n (n=1, 2, nb=bicyclo[2.2.1]hept-2-ene), prepared in situ from Pt(nb)₃, are useful reagents for addition of Pt(P-iPr₃)_n fragments to saturated triruthenium clusters. The complexes Ru₃Pt(CO)₁₁(P-iPr₃)₂ (1), Ru₃Pt(-H)(₃-³-MeCCHCMe)(CO)₉(P-iPr₃) (2), Ru₃Pt(₃-²-PhCCPh)(CO)₁₀(P-iPr₃) (3), Ru₃Pt(-H)(₄-N)(CO)₁₀(P-iPr₃) (4) and Ru₃Pt(-H)(₄-²-NO)(CO)₁₀(P-iPr₃) (5) have been prepared in this fashion. All complexes have been characterized spectroscopically and by single crystal X-ray determinations. Clusters 1–3 all have 60 cluster valence electrons (CVE) but exhibit differing metal skeletal geometries. Cluster 1 exhibits a planar-rhomboidal metal skeleton with 5 metal–metal bonds and with minor disorder in the metal atoms. Cluster 2 has a distorted tetrahedral metal arrangement, while cluster 3 has a butterfly framework (butterfly angle=118.93(2)°). Clusters 4 and 5 posseses 62 CVE and spiked triangular metal frameworks. Cluster 4 contains a ₄-nitrido ligand, while cluster 5 has a highly unusual ₄-²-nitrosyl ligand with a very long nitrosyl N–O distance of 1.366(5) Å.     

Investigation of thermal properties of ruthenium(III) Β-diketonate precursors for preparation of RuO2 films by CVD

By means of a tensimetric flow method and a static method with a silica-membrane zero gauge, the dependence of vapour pressure on temperature was obtained for tris(2,4-pentanedionato)ruthenium(III), Ru(aa)₃, and tris(1,1,1-trifluoropentane-2,4-dionato)ruthenium(III), Ru(tfa)₃. The thermodynamic characteristics of vaporization and sublimation of these complexes were determined. The processes of thermal decomposition of the vapour of the compounds in vacuum, hydrogen and oxygen were investigated by using mass spectrometry in the temperature range 170–550C for Ru(aa)₃ and 150–620C for Ru(tfa)₃. The threshold temperatures of the stability of the vapour of the complexes and the rate constants of the thermolysis processes were determined. The main gaseous products of the thermal decomposition and the dependences of their composition on the presence of hydrogen and oxygen were established.     

Charge-transfer complexes betweenp-toluidine and iodine in solution: A kinetic study

The kinetics of charge-transfer interaction betweenp-toluidine and iodine in methylene chloride was investigated in depth. Thethermal process of formation of theinner complex was found to proceed to an equilibrium. Thephotochemical process follows a different reaction coordinate, going through the formation of an exciplex between the excitedouter complex and the amine ground state. In both cases the same ionic complex (Am ₂I⁺I ₃ ^– , whereAm stands forp-toluidine) was detected as the final product.

---

Kinetische Untersuchung der Charge-Transfer-Komplexe zwischenp-Toluidin und Jod

Zusammenfassung Die Kinetik der Charge-Transfer-Wechselwirkung zwischenp-Toluidin und Jod in Methylenchlorid wurde ausführlich untersucht. Derthermische Prozeß, der zur Bildung desinner-Komplexes führt, geht bis zu einem Gleichgewicht. Derphotochemische Prozeß folgt einer unterschiedlichen Reaktionskoordinate und verläuft über die Bildung eines Exziplexes zwischen dem angeregtenouter-Komplex und dem Amin im Grundzustand. In beiden Fällen wurde derselbe ionische Komplex (Am ₂I⁺I ₃ ^– , wobeiAm fürp-Toluidin steht) als Endprodukt festgestellt.