ANALYSIS OF RECTANGULAR WAVEGUIDE GRATING SLOW-WAVE STRUCTURE WITH THE ARBITRARY SHAPED GROOVES

The rectangular waveguide grating slow-wave structure (SWS) with arbitrary shaped grooves is presented and analyzed in this paper. As an all-metal slow-wave circuit, it has properties that can be used in high-power millimeter-wave or sub-millimeter wave traveling wave tube (TWT). The unified dispersion equation and the expression of coupling impedance are obtained in this paper by means of an approximate field-theory analysis, in which the profile of the groove is approximately replaced by a series of steps and the field continuity at the interface of two neighboring steps together with the field matching conditions at the interface between the groove region and the interaction region are employed. A rectangular groove SWS was manufactured and the cold measurement was made. The experimental data are in good agreement with the numerical calculation. The derived transcendental equations are resolved numerically for four classical structures such as rectangular, dovetail, ladder and cosine. Finally, taking the rectangular waveguide grating SWS with rectangular grooves for example, the influences of physical dimensions on dispersion relation and coupling impedance are discussed.     

制备波导光栅的相位掩膜技术

制备波导光栅的相位掩膜技术＊马少杰李燕徐迈林久令（中国科学院长春物理研究所，长春１３００２１）（中国科学院激发态物理开放研究实验室，长春１３００２１）关键词光波导，光栅耦合器，全息光栅自从７０年Ｄａｋｓｓ等人首次报道了集成光波导光栅器件以来［１］，波...     

矩形栅慢波系统的高频特性分析

对于矩形栅这一经典的慢波结构,采用场匹配法来分析其慢波特性,进而得到其耦合阻抗。其中对槽区内的场处理,保留其高次项,表示为一无限本征驻波之和的形式。然后通过数值实例具体分析了矩形栅的两种典型结构：浅槽栅和深槽栅。当增大槽深后,色散增强,系统通带变窄,同时耦合阻抗有明显增大,工作点移向前向波区,适合用在放大器的慢波结构上。     

阵列波导光栅复用/解复用器焦场的数值分析

本文利用标量波动衍射理论分析了AWG系统焦场分布,数值计算了阵列波导光栅系统的焦场分布,此方法简便,对器件的优化设计有一定的指导意义.     

Study of the double rectangular waveguide grating slow-wave structure

A slow-wave structure (SWS) with two opposite gratings inside a rectangular waveguide is presented and analysed. As an all-metal slow-wave circuit, this structure is especially suited for use in millimetre-wave travelling wave tubes (TWTs) due to its advantages of large size, high manufacturing precision and good heat dissipation. The first part of this paper concerns the wave properties of this structure in vacuum. The influence of the geometrical dimensions on dispersion characteristics and coupling impedance is investigated. The theoretical results show that this structure has a very strong dispersion and the coupling impedance for the fundamental wave is several tens of ohms, but the coupling impedance for --1 space harmonic wave is much lower than that for the fundamental wave, so the risk of backward wave oscillation is reduced. Besides these, the CST microwave studio is also used to simulate the dispersion property of the SWS. The simulation results from CST and the theoretical results agree well with each other, which supports the theory. In the second part, a small-signal analysis of a double rectangular waveguide grating TWT is presented. The typical small-signal gain per period is about 0.45 dB, and the 3-dB small-signal gain bandwidth is only 4\%.     

介质加载矩形波导栅行波管的小信号增益计算

介质加载矩形波导栅行波管是一类新型毫米波大功率器件.给出了此结构引入电子束后的“热”色散方程,并利用“牛顿下山”法求解了此复杂系数超越方程,研究了介质加载以及电子束参数对小信号增益的影响.计算结果表明：介质加载可以扩大矩形波导栅行波管的带宽,而增益有所减小.为了弥补增益的降低,可以适当增加槽深度,也可在一定的范围内提高电子束电流.给出的结论对于研制此类行波管具有一定的指导意义.关键词：介质加载矩形波导栅小信号增益“热”色散方程     

全息光栅的制作及光栅常数测定的研究

文章介绍了设计性实验——全息光栅的制作及光栅常数测定实验的设计思想、具体要求、常见问题、解决方案。     

光栅色散的新型演示实验

本文介绍了一种适合于课堂使用的光栅色散现象的新型演示实验装置.     

5层介质波导中的场分布研究

研究５层介质平板波导中的场分布。推导两种情况下的场分布表达式及色散方程，并对结果进行数值模拟。解决由探测器拾取到的信号来推知波导层中导波的传输状态这一问题。     

IMPROVED GENERALIZED ADMITTANCE MATRIX TECHNIQUE AND ITS APPLICATIONS TO RIGOROUS ANALYSIS OF MILLIMETER-WAVE DEVICES IN RECTANGULAR WAVEGUIDE

An improved generalized admittance (GAM) matrix technique is presented in this paper. Matrix transformation eliminates the singularity factor of GAM, denominator (1+Γ), because of new presentations of GAM. The relationship equations between II-port current and I-port incidence wave is computed by mode matching method. The generalized scattering matrix (GSM) of waveguide structure and its discontinuity problems is obtained with relationship equations and reflection coefficients. The GSM’s of millimeter-wave multistepped bend and T-junction in rectangular waveguide are computed by the improved GAM technique. The results comparisons between the proposed method and commercial software HFSS10.0 show the validity of the proposed method, which improves the validity of the GAM technique and reduces mathematical efforts. It is general, very efficient and can be used to solve other complicated and multiport network problems.